Similar Questions

• I have a model of the Apple TV A1625 and a Logitech bluetooth kb k811.  It works very well, but how do I use to turn the Apple TV?

  I have a model of the Apple TV A1625 and a Logitech bluetooth kb k811.  It works very well, but how do I use to turn the Apple TV?  Which button or buttons use?

  Is not possible. You'll need to use the Apple TV remote to turn it off.

• use to have xp. When xp stop working on my sony vaio model pcvrx540 a friend installed linux on it. can I do a fresh install of windows xp os House without cd. they have prod.key num.

  My sys. use to have xp home edition. When xp stop working on my sony vaio model pcvrx540 a friend installed linux on it. can I do a fresh install on the net with my oridgenal prod. key num? have no drive at all

  Hello

  There is no Net download that is not for the most hacked and / or infected with Malware

  Save your data and do a clean install of XP.

  http://pcsupport.about.com/od/OperatingSystems/SS/instxpclean1.htm

  If you do not have your XP disk, you can contact Sony and ask them to send you a XP disc.

  They should do this for a small fee.

  You need to change the Boot order to make the DVD/CD drive 1st in the order of startup and startup disk:

  How to change the Boot order in BIOS:

  http://pcsupport.about.com/od/fixtheproblem/SS/bootorderchange.htm

  "How to replace Microsoft software or hardware, order service packs and replace product manuals.

  http://support.Microsoft.com/kb/326246

  Linux installation could destroy this XP Reinstall option:

  And if you have never received a recovery disk when you bought your computer, there should be a recovery Partition on the hard drive to reinstall XP back on how you purchased your computer.

  The recovery process can be started by pressing a particular combination of the key or keys at startup. (Power on / start)

  It may be Ctrl + F11, F10, F11, Alt + F10, etc., depending on the manufacturer.

  Ask them to the proper key sequence.

  See you soon.

• I'm black or white rectangles covering my picture while I'm working. I unchecked the camera raw 'use the graphics processor' I use an end 2013 27 "iMac. Can anyone help?

  I'm black or white rectangles covering my picture while I'm working. I unchecked the camera raw 'use the graphics processor' I use an end 2013 27 "iMac. Can anyone help?

  Hi Joel,

  • What version of Photoshop installed on your computer?
  • Also, please go to the Photoshop preferences, then the performance tab.
  • Here please click Advanced under 'Use Graphics Processor' settings and change the mode of drawing on 'Basic '.
  • Also uncheck "Open CL"
  • Restart Photoshop and then try to open an image and see for the boxes.

  Let me know if it helps.

  Kind regards

  Tanuj

• How to clean the printhead on an HP Photosmart Plus model B210e using Windows 7?

  How to clean the printhead on an HP Photosmart Plus model B210e using Windows 7? I can print in color, but not with the black cartridge, what's new...

  I'm including a document print quality, I'd take a peek at the five solution it will guide you in the process of cleaning print head via the Control Panel on the printer.
  
  Print quality
  
  Let me know how it goes.

• Create a model that can be replicated, but will not show changes in the original model, which occurs in any comps duplicated from it?

  I imported a doc I - 4 layers. Then I dragged these 4 layers in a new comp - comp1. I would like to reproduce this model so that I can try different things using these same 4 layers. But when I duplicate the comp I did - comp 2 - any change I make appear in comp1. How can I create a model that can be duplicated - but will not show changes in the original model, which occurs in any comps duplicated from it? Thank you very much!

  (CS5.5)

  It is a common misunderstanding when you start working in Ae. It takes time to get used to, and even veterans are still this error from time to time. Here's the thing, you have to get in your head: your project Panel is where your source material is, and the timeline is the place where there is a representation of this source. This means that if you duplicate an item in your timeline (particularly relevant for the precomps) it will duplicate a copy, not the source. so, if change you it - it will change all instances of this copy. If you want to duplicate a precomp and create another source, you will need to do it in a 4 step operation:

  1. duplicate your precomp in the timeline (you got that day)
  2. Select the source of this copy in the project Panel (currently the same precomp)-right click on the-> precomp 'reveal the source layer project.
  3. duplicate the precomp selected in the project Panel
  4. replace the copy in your panel mounting with the duplicate of the Source Panel (shortcut - Ctrl + alt + / when both are selected, or drag it to double with pressing Alt)

  what you are really duplicate the precomp twice - once in the project window and once in the timeline, and then one link to the other.

• Hi all OneHow can you buy an IBook UK not available in Indian store a store; When you change the status of your country, your billing information and credit cards won't work; is there a solution for this using the same method of billing.

  Hello world

  How can buy you an IBook of UK not available in Indian store a store; When you change the status of your country, your billing information and credit cards won't work; is there a solution for this using the same method of billing

  There is no solution, if it is not available in your area, you can't buy it.

• ASP would repair a Satellite A model, which is more under warranty

  Please could someone help me out here.

  I registered my Toshiba laptop with the Toshiba site, when it was first purchased and I heard that there is a 2 year warranty with your product if it is registered with you site.
  The problem is that I just discovered on the 2-year warranty and my laptop is now out of the warranty period.

  The real problem is, my laptop broke about 13 months after purchase (the last time I used it would prove the time to break) and I just discovered on the 2 year warranty site that is now out of warranty I will continue to be able to get it fixed for free by Toshiba.

  Hello Sam

  Is your question about laptop repair understood or you have any other questions?

  To be honest, you guys really strange. You come here to connect with other people, read some reviews and what you do in the end bring you Garrett so low because of his opinion. It's really not fair. Be happy that someone wishes to discuss your problems and try to offer some comments on this. Must all of us have the same opinion as you?

  So, if your question is: ASP would repair a Satellite A model, which is more under warranty?
  The answer is: YES. But you know that you will have to pay for it.

• My computer freezes and stops working as soon as the antivirus is used.

  Original title: My computer has detected a virus.

  & He is obviously infected by a virus, but now when you run any number of different programs of not doing a full scan is detected. What should I do?
  I rebooted, it about 3 times & the virus survived still reboots.

  It freezes and stops working as soon as the antivirus is used. When you try to reinstall the Virgin keep PC, gets it to halfway through the installation, stop & comes with a blue screen.

  Hello
   
  What is the blue screen error code?
   
  System freeze may be due to viruses or some third party applications. So let us, start your computer by disabling all third-party services and see if it helps.
   
  Method 1:
  Try to perform the clean boot and check if it helps, here is the link:
  http://support.Microsoft.com/kb/929135
   
  Note: When you're done to diagnose, follow step 7 in the article to start on normal startup.
   
  Method 2:
   
  I suggest you make a system full scan just to be sure.
  Here is a link that will give you information on how to perform a full scan of the system:
  http://www.Microsoft.com/security/scanner/en-us/default.aspx
   
  Note: The data files that are infected must be cleaned only by removing the file completely, which means that there is a risk of data loss.

• Dell Precision M6500: Reference DELL M6 500 computer laptop does not charge when the work and no start-up when which

  Laptop DELL M6 500, do not load when the work and no start-up when which

  just bettry lights blink when phone on Exchange when I plug laptop tap, on bettry

• OfficeJet pro L7780: officejet pro L7780 replace it with the new model, which is comparable?

  I want to replace my old officejet pro L7780 with a new model, which is a comparable HP model today?

  Hello

  You can check the HP Officejet Pro 8620 as example, it is a product of the same level:

  http://store.HP.com/us/en/PDP/printers/HP-OfficeJet-Pro-8620-e-all-in-one-printer?JumpID=cp_r163_us/en/IPS/iito/shared/8620img

  You can check the HP site for the HP Officejet Pro series printers, more as wel as some HP Officejet printers.

  Kind regards

  Shlomi

• I am trying to install VideoCam Suite 3.5 from the original CD. It worked fine on my old computer which has Vista.

  I am trying to install VideoCam Suite 3.5 from the original CD. It worked fine on my old computer which has Vista.  It worked fine on my old computer which has Vista. My new computer is Windows 7 and I get the message "use an environment to display 1024 * 768, 16 bits or more. I don't know what that means and I don't know how to achieve this necessary "display environment.

  The video camera is a Panasonic SDR-H100 with VideoCam Suite 3.5 CD to operate.

  designates the monitor display settings 1024 * 768

  This means that the software is probably not supported under win7, visit the site to see if the software update is available for use with your camera Panasonic

  http://Panasonic.jp/support/global/CS/soft/download/vcs35l011.html

• Error trying to update the model XML using XML Publisher administrator

  Hello people,

  We are on R12.1.3

  I changed a condition in a report and you try to download the new model XML using XML Publisher administrator.

  When I click the button to apply, it is throwing an error "bad request".

  Navigation: XML Publisher Admin > data definitions > query report

  Click on the report name > click 'Update file', in addition to the data model > choose file > click Apply

  I get the below error

  Bad request

  Your browser has requested that this server could not understand.

  
  

  Now, I could not download a new model of XML.

  
  

  I'm doing something wrong.

  
  

  Kind regards

  Kris
  

  user10163762 wrote:

  Thanks Eugen and Hussein.

  The problem is not with the template.

  It seems to be a problem in this particular case.

  Transferred to another instance.

  However once I run the program, I can't display the output as flashes and disappears from the window of the browser.

  My colleague says, it's to do with the trusted site to download something from the browser.

  Can you please guide me on how to solve this problem?

  http://bit.LY/1k8e2vi

  Thank you

  Hussein

• I work with Lightroom 3 and want to use photoshop element 8 to edit photos.

  I work with Lightroom 3 and want to use photoshop element 8 to edit photos.  Problem in Lightroom – photo tab there is no option "EDIT IN".  What should I do?

  Hi ssft,

  Follow the steps in the article to add an external editor in Lightroom Photoshop Elements 8 preferences:

  Adobe Photoshop Lightroom Help | Editing photos Lightroom in Photoshop or Photoshop Elements

• Having a problem with the RL today.  Cursors do not work in the development section.  I use LR CC - latest version, OS EL Capitan.  Cannot close LR either.

  Cursors do not work in the development section.  I use LR CC - latest version, OS EL Capitan.  Cannot close LR

  Guess he decided to work on its own.