BlackBerry AutoText on Q5 Q5 suddenly does not work

Similar Questions

• Tecra M2 suddenly does not work with power supply

  Hello

  Suddenly my laptop does not work with power... (with the battery, that it works very well)

  The power supply works fine.

  Someone at - it an idea for this error?

  Winni

  Maybe the DC-in port has no contact with motherboard anymore and the electronic board can not get AC power.

• Touchpad suddenly does not work

  I have a Compaq Presario CQ56-202 and suddenly while making a comment in a thread on FB one (very briefly) saw a flash symbol... something with a red on X. It is so short that I didn't have a chance to really see what it was. Have never seen him before. Then I noticed a small red light on the touchpad, and now the touchpad does not work. The mouse works fine.

  Someone at - he a clue as to what happened? What can I do to get it working again?

  Number 1 in this photo shows the area of tap to toggle the touchpad on some models. Have you this?

  http://support.HP.com/us-en/document/c01983909

• BlackBerry Smartphones Foursquare version 5.5 does not work

  FOURSQUARE version 5.5 does not work, I can not access your room and send the message "error invalid geocordinates 0.0000000, 0.0000000.

  What can I donwgrade to version 5?

  Hello ycano and welcome to BlackBerry Support Community Forums.

  Sorry to hear that you are having problems with the Foursquare application.

  We cannot comment on 3rd party applications. You will need to contact the Foursquare support for assistance in obtaining another version of the software. Visit http://support.foursquare.com/home for support resources.

  Thank you!

• Client VPN suddenly does not work

  An external interface address changed on this PIX 501 yesterday - all of a sudden their client VPN does not work.  I checked that nothing in the config VPN configuration has changed.  I now see a *(HASH.) ("OAK NOTIFY ISAKMP INFO: NO_PROPOSAL_CHOSEN") in the journal on the VPN client.

  I crossed referenced on google - nothing in the statements of NAT, Access-list, or VPN configurations have changed.  Any ideas?

  Thank you
  Greg

  Your configuration is absolutely perfect.

  Please, try the following:

  no interface card VPN crypto outdoors

  card crypto VPN outside interface

  Remove and reapply the cryptomap on the external interface and see if that helps.

  Thank you

  Jeet Kumar

• [Ideapad Z480] Dolby Home Theater suddenly does not work

  Hi all

  I have a problem with home theater dolby (DBT as I call it) today. I explain it. well, that's how. usually when DBT is off, the volume is normally low and all those that somehow the normal speaker settings. When I click on the DBT icon on the tray, usually it brings up 3 profile which is film, music & game. But today, it does not work. whenever I have I turn it on, there is no change in sound at all (volume, bass, pitch, etc.). even the equalizer slider made no change on the sound produced by the speaker. I don't test it on my helmet, speaker external and theres no change. but the noise is always present and no change to dolby. can someone provide me with a solution?

  Thank you and sorry for the bad language, I have trouble typing in English.

  OK NVM, I fix it. After installing dolby advance audio v2, I opened, select any profile, then end task in the process from the Task Manager, uninstalling dolby advance audio v2, then install dolby home theater v4. It works fine now.

  Thanks a lot neokenchi. I appreciate your help

• MUTE button suddenly does not work

  I have a sl410 with windows 7 Home premium pre-installed and all the multimedia keys worked very well.

  After a few updates (driver lenovo and windows), mute my button does not work.

  Because I use Hibernate instead of shutdown that I can't say precisely what update caused this problem.

  A strange thing is that when I turn off the sound by the control of its use in the system tray, laptop mute button lights! But by pressing the button on the laptop has no effect.

  Lenovo update program says there is no update for me.

  Any suggestions?

  I solved the problem myself, but I don't know how!

  First of all, I used the recovery DVDs to restore windows. I saw "running windows for the first time" and all but the problem was still there. So I tried to downgrade my bios to 1.30 (it was 1.31) but I have found the bios file (thank God!).

  But after a few updates from Lenovo (power management, audio colleague and...) the problem was gone.

  Now everything works.

• BlackBerry 10 why my search engine does not work with the book of Contacts?

  Yesterday, after the next upgrade, my search engine simply does not work with contacts.

  Update:
  OS version: 10.3.1.2576
  Software r: 10.3.1.1779

  When I opened my contacts, all of them are displayed, but as soon as I type a letter, the screen will just totally "empty", as I have very strange person indeed.

  Anyone?

  Thanks anyway for your help, but the final solution was to reload and upgrade the full operating system.

• Selector color Photoshop suddenly does not work

  Hello

  I never had this problem before. I worked on a project in Photoshop, and for some reason, he now works only in shades of gray. When I used the color picker to change the color, it does not work.  I know, don't forget to do anything different to make it work only in shades of gray, but I can't seem to understand how to switch color mode and I'm in the middle of an important project. Anyone know how to fix this?

  Penny Jones

  [email protected]

  Look at the Document tab at the top. RGB/8 should be the norm.  If you somehow typed 'q' on your keyboard, then it would read

  'Mask quick/8' and the color picker would not choose a color. Press q for back RGB.

  Always check the Document tab, it will clue you into what you have selected. He says "Layer 0, layer mask/8" If you have selected a layer mask.

  Finally you may have selected a color channel and it would read layer 0, blue/8.  Cmd/Ctrl 2 can go back you to RGB.

• SpeedGrade CC 2015 suddenly does not work on my monitor 4 k

  I use Speedgrade CC 2015 since August and it opened fine.  But recently, it opens not on my 4 k screen.  He tries by default open on my HD screen no smaller, and when I drag him to the monitor 4 k, it looks like this...

  Can't seem to make it work right.  I want to reiterate, it used to open and run perfectly on my 4 k monitor and now it doesn't.

  Data sheet:

  Mac Pro (end 2013)

  OS X Yosemite 10.10.5

  Processor; 3.5 GHz 6-Core Intel Xeon E5

  16 GB 1866 MHz DDR3 ECC memory

  Graphics AMD over-pants D500 3072 MB

  The two monitors:

  H213H screen: 21.5 inches (1920 x 1080) AMD over-pants D500 3072 MB

  U28D590 (Samsung) display 27.5 inches (3840 x 2160) AMD over-pants D500 2072 MB graphic (it is the monitor it should work on but does not work)

  Firstly, SpeedGrade will put the user interface on the main system monitor, you can not change this. Period. If the 4 k monitor is your 'hand' monitor sees of your operating system, which is where Sg will work main UI, and if the 1080 monitor is you 'main' or number 1 for your system, this is where he will put the part of the program. And it will only use your number 2 screen (as the OS sees it) for the monitor of the program if you have enabled display options double on the key icon view tab.

  To set the dual display on a monitor, SpeedGrade has a rather unique approach... Look at the next screen, in the display of the icon of the key (settings) tab...

  

  First of all, you must check 'Enable' under "Dual Display Output"... then

  (1) ' left' and 'Top' say Sg where in relative terms, the upper-left pixel of your second screen is to the left or right and upwards or downwards from the upper-left pixel of your number one OS or the main monitor.

  In my case, I have two 1920 x 1080 monitors stacked vertically, so the top left pixels of two monitors are in the same place left to right, so my 'left' is set to 0. If you want my second screen to the left, that would be the width of the number of pixels of the screen of this second as a NEGATIVE number, so it would be for me-1920; If the second monitor was on my right, it would be a positive number, the width of the 'primary' UI screen... who, like me, are the same, would also be 1920 as a positive number.

  The second monitor being highest on the main screen, the number of 'Top' is negative, the height of the number of vertical pixels of the second monitor. In my case, of course... it is-1080. If my monitors were side by side, it would be '0 '.

  (2) the 'Width' and 'Height' numbers are for your second screen, "the program monitor" will appear on. Simply put this number of pixels in there.

  And that's how Sg works... as intriguing as...

  Neil

• Safari suddenly does not work: search box does not

  Safari has suddenly stopped working.

  When I open it, it will open the home page, and if I go to an element in the story, they're going to open this page, but the search field that you type things does not. He has a blue line around it and and will not accept any input from the keyboard: it remains empty. I tried to quit and re-opening. I have the latest version of Safari.

  I'm on a MacBook Pro 13 inch Retina, running OS X El Capitan 10.11.3, Safari 9.0.3.

  Thank you very much.

  Hey! Take a look at this. This temporary fix helped a number of users here. Over time, everything should be resolved then wait for a while.

  A possible solution to the problem of address bar: disable the Safari Suggestions

  If you have problems to open Web pages, take a look at these techniques proposed by Apple of troubleshooting.

  https://support.Apple.com/en-us/HT204098

  Go to the Safari menu (at the top right of your screen next to the Apple icon), choose 'Quit Safari'

  Press the "Shift" key and while holding this button on your unique keyboard, click the icon of Safari on your Dock.

  Open Safari - Preferences - Privacy - data to remove any Web site.

  Open the menu to go with the Option (Alt) key - library - key locate Safari folder and place it on your desktop. Restart your Mac, open Safari and delete the file from your desktop.

  Also, try the following steps:

  Restart your Mac.

  Try to start:

  -Stop your Mac

  -Wait until your computer turns off and after that press the power button

  -Just after you hear the startup tone, press in and hold the SHIFT key

  -Release the SHIFT key when you see a gray Apple sign and the progress under this sign bar

  -Once your Mac boot, restart dhcpd as you usually do.

  Additional information:

  s-bug-related-to-Safari-suggestions/ http://9to5mac.com/2016/01/27/Safari-on-iOS-and-Mac-Crashing-today-for-many-User

  http://www.Buzzfeed.com/josephbernstein/Apple-says-it-has-fixed-the-bug-that-was-crash-Safari # .xpl26R2Ld

• BlackBerry Blackberry Q10 Assistant on automatically - keyboard does not work

  Hello

  I have my phone Blackberry Q10 now for 1 month, and since a few days the problem has turned up, randomly Blackberry companion light automatically. Sometimes visible through the open window, App - but sometimes also without this, but you recognize because the keyboard no longer works. This can happen when you type a message.

  The wizard then opens whenever I press the power button to lock the display so that the screen doesn't lock.

  In all this is very annoying and makes the phone in time allmost impossible to use.

  The solution only little time that I found is to close the wizard via the app Manager, but then it starts itself after maximum 1 h and the problem continues. I tried to disable all the functions of the wizard, but it does not help.

  I would be very happy for any help with this problem. For example, is it possible to delete/disable the wizard?

  Best regards

  JWI

  PS: OS Version is newly updated to 10.3.2.2836, but the problem existed before the update

  Hi jwi,.

  Welcome to the BlackBerry Support Community Forums

  Have you tried pulling the battery for a few minutes?

  If it does not please re install the software via BlackBerry link but make a backup first if you want to keep your data.

  Ice

• Satellite M50 suddenly does not work

  I wonder if anyone can help?
  My Satellite M50 seems to have a number of very important issues:

  On booting, I hear a note very acute and rather than go automatically in Windows XP, I gives me a choice of F2 (Set Up) or F12 (Menu I think it is called). If I hit the button enter the noise goes and go into Windows XP as usual.

  However, I can't sound on the Satellite, either from a CD or a DVD inserted or a live video or
  audio clip. I checked the control panel and audio is not muted.

  Also, my 'e' character on the laptop does not register (press and no character comes on screen - I have to fix a new keyboard to the laptop to use the letter "e") BUT in Excel or when I put in a URL, I often get a complete line after the rank of the character "e" (without warning) that stops if I press the button "Esc".

  I don't know if I was infected by a virus (I have Avira AntiVir Personal) & Malaware programs on the laptop, but I would be grateful for any help on this problem.

  See you soon!

  Bryan

  Hello

  I think it s a keyboard problem.
  The sound that appears at the beginning of the startup procedure means that a hardware failure has been detected.
  In my opinion it s related to the keyboard, since you have no keyboard under Windows OS functionality.
  So I would get in touch with ASP in your country and to order a new keyboard for the replacement.

  Regarding the sound issue.
  I don't know what that might be, but actually the first step should be an update of the driver or a new installation.
  Check if there is no yellow/reclamation brand that reffers to the sound card!

  See you soon

• Satellite L870 - suddenly does not work

  An hour ago, it was fine and then when I got back to it a few minutes ago, the screen was black and although the laptopn is a normal operating noise, nothing does. It seems to get pretty hot and I can't turn it off.

  There are 2 red lights and a white light showing on the front of the laptop but does not blink.

  I am a total fool computer BTW.

  Press the power button and hold the button for a while. Laptop should stop.
  Wait a few seconds and try to start it again.

  What happens when you do this?

• Safari, suddenly does not work on iPhone and Mac

  An hour ago I recognized, Safari on iOS crashes, when I try to enter a url. I can still open sites I bookmarked. As I wanted to google the problem on my MacBook, the same phenomenon occurs on Yosemite. Just that Safari does not crash but seems don't take no action, when you enter a url. Restarted both systems and ran the last update for the phone. Anyone with the same problem or a solution?

  THX

  Settings > Safari > turn off the Suggestions of Safari