BlackBerry GPS App

I recently downloaded Cascarun Pro and GPS is off.  Y at - it something wrong with the application or if it does not recognize my BB.  I thought it was the app so I downloaded Endomondo and once again the GPS does not work.  How can I sync the app to my BB?  GPS works on the BB, but it does not seem to recognize the app, is it possible?

Downloaded these apps are where?

Check your settings > Services sites to confirm the GPS is activated.

When using two applications, if you swipe up to minimize the application, do see you the little gray clear round symbol at the top on the right, as shown in the image below?

Tags: BlackBerry Smartphones

Similar Questions

  • BlackBerry GPS App Z30 maps does not work without wifi

    Hi there maps GPS app for BB does not work without wifi?

    Very well. Good. Wanted to make sure that you guessed it sorted.

  • BlackBerry smartphones no GPS app...

    Hello! I have a bb pearl 8110 w/gps support. When I connect the BB to my computer, on the BBDS, appear the GPS app, but there is no icon in the menu...

    any solution? Thank you

    Info:

    BB Pearl 8110, OS 4.5.0.182

    original AT & T, but it is unlocked

    Yes, I understand.  BBMaps is stuck on the ATT devices.  They hide the icon.  I propose to install Google Maps instead.  Go to www.google.com/gmm on your BB browser.

  • GPS apps in the background

    I have an iPhone 6 s upgraded to iOS 10 the day it came out last week and I noticed that applications using GPS are failing in the background when several applications are in use. I ran to the Waze to check the traffic and Google Maps at the same time to check something on Friday and has noticed that if she was in the background would tend to turn off after a few moments. When I turn back, she will have to acquire the road again. I also have a Fitbit load HR, which uses the GPS on the phone via bluetooth to create a map of my route. I have it worked out with my usual Runkeeper app (which normally works perfectly) and noticed that Runkeeper would be closed after a mile or more. When I went to him to my podcast app after my race, Runkeeper would start up and missed the last two miles of my race. In addition, the road saved by Fitbit seemed jumped all over the place. I know that it is not unusual for GPS from blip, especially when moving through areas with weak signal or cell mutation or all through the streets of the city with tall buildings, but it seems that the problems have become more coherent. I have not tried to run with a single application to see if I have the same problem, but will try tomorrow. I used only a single app for navigation (Waze) yesterday evening and he seemed also to close after it is placed in the background for a while. Has anyone else seen anything like this?

    Hello alexhoward,

    Thank you for using communities of Apple Support. It is my understanding GPS apps do not work in the background, after the update to iOS 10. I use GPS every time I travel. I know that it can be crucial for applications GPS running in the background. I'm happy to help you

    I recommend first restart your iPhone. This can solve many unexpected behaviours. Follow the steps below.

    1. Press and hold the sleep/wake button until the Red slider appears.
    2. Drag the slider to turn off your device completely off.
    3. Once the device turns off, press and hold the sleep/wake button again until you see the Apple logo.

    Restart your iPhone, iPad or iPod touch

    If the problem persists, reset your location service. This resets all settings at default location. Apps will be stop using your location until you grant them permission again. Go to settings > general > reset > reset the card and privacy. Here is some additional information on location Services.
    On privacy and location in iOS Services 8 and later versions

    See you soon!

  • The blackBerry Facebook App (attention) software update

    just a quick heads up on this one. Update Facebook on the blackberry world app store. the last update will wipe your app software and download new one that NEVER let you use the app. It will redirect you to the Web site using the internet connection. Ive just said it will happen also to whats app soon. BlackBerry decided not to support the apps more. now, personally I only don't look now and again so no biigy for me but I'm not sure who would use much of the data or would it be the same amount.

    arthur72 wrote:
    Hi Jim

    This isn't Facebook and decision actually, WhatsApp BlackBerry. Please take a look at this link:

    http://blogs.BlackBerry.com/2016/03/great-apps-on-BlackBerry-a-strong-commitment-to-the-BlackBerry-d...

    See you soon.

    Thank you @arthur72!

    @MrDJ, we have published another post to provide some clarification on the recent update > http://blck.by/1RIurVR

  • Can use code MNO to get Blackberry - GPS location if not available

    Can we use code MNO for location of the BlackBerry - GPS terminal if not available in this device?

    If yes then give me an idea how?

    If not, then is there any other way to get the approximate location of this device using mobile operator (if no GPS available)?

    Waiting for your answers...

    Thanx

    We can use the google hidden APIs to get the latitude and longitude, by the way

    GPRSInfo.getCellInfo () .getLAC)

    and GPRSInfo.getCellInfo () .getCellId)

    to this API.

    So resolute. Thnx

  • E-mail Info curve8310 using Java BlackBerry GPS

    Here is the code for blackberry GPS information sent to an e-mail address. The code uses sleep to send information at intervals.

    My problem is that when once that the GPS goes out of scope the application stops sending emails and no exception is thrown.

    If (lp! = null)

    {code}

    Sleep (65000);

    But it did not work for me.

    ////////

    public void run() {}
    While (! _stop) {}
    Address one;
    Store is Session.getDefaultInstance () .getStore ();.
    Records file [] = store.list (Folder.SENT);
    Folder sentfolder = files [0];
    Message m = new Message (sentfolder);
    SimpleDateFormat sdf;
                  
    try {}
    LP LocationProvider = LocationProvider.getInstance (null);
    If (lp! = null) {}
    Location = lp.getLocation (60);
    Coordinates of c = l.getQualifiedCoordinates (); get the GPS coordinates
                           
    If (c! = null) {}
    Lat string = Double.toString (c.getLatitude ()); Latitude
    LNG chain = Double.toString (c.getLongitude ()); Longitude
    String alt = Float.toString (c.getAltitude ()); altitude
    Tim string = Long.toString (l.getTimestamp ()); timestamp
    String spd = Float.toString (l.getSpeed ()); Speed
                               
    String orgstr = "0449953853", + tim + ',' + lat + ',' lng + ',' + ', ' + alt;
    String googmap =http://maps.google.com/maps?q= "+ lat + ',' + LNG;
    String finalstr = orgstr + "\n" + googmap;
    a = new address ("[email protected]", "Aditya Tuli";)
    Address address [] = {a};
    m.addRecipients (Message.RecipientType.TO, addresses);
    m.setContent (finalstr);
    m.setSubject ("GPS Position";)
    Transport.Send (m);
    }
    } sleep (65000); moved to re - run the thread
    } catch (Exception e) {}
    System.Err.println ("an error occurred" + try ());
    System.Exit (0);
    }
    }
    }

    ///////

    Please suggest.

    Thanks in advance.

    Concerning

    I think we have agreed that the problem is that it is there no LocationProvider or the getLocation is not a place, so to determine which of them seems to be the best place to start.  As you test on the device, you must debug on the device, you can connect by USB, starting the JDE, using the Debug/Attach To / Pocket PC, then select USB connected device.

    From there, you should be able to use the JDE debug, but according to levels, this sometimes does not work so well for me.  So I would like to add three statements of System.out.println (...), one at the beginning of the loop and the others inside each of the ' if.  This load on the device, then, once debugging started, simply wait for the missing output for each loop!

    Who help me?

  • BlackBerry smartphone App world reset login information

    Hi, I have a trouble reset my app world login email and password. The previous owners account is still active. I tried to remove the app and redownloading world but old account always comes to the top.

    Hello. First back up contacts on a pc using blackberry desktop app then go to security settings security wipe E-mail options and select contacts and user installed applications, then wipe data

  • BlackBerry smartphone App world requires the latest version of the BlackBerry ID

    To open My App world it says that it requires the latest version of the BlackBerry ID so I pressed unsuccessfully, but he says the "software update has been interrupted. Please try again. "So I turned off my phone and you press update over and over again using a WiFi too, but nothing happens. My internet connection is great, my bbm and everything works fine.
    When I pressed close instead of update, here's what happened, identity BlackBerry installation failed. Please try again later. (80002) its been two years...

    Two copies:

  • Smartphones from blackBerry Torch App startup problem

    Trying to fill my book reading, ask Blackberry download app bridge on my tourch 9810. I downloaded the app but my torch won't let me open the program. Only he can remove it, summer and refer to the page. How make it past this page?

    rangerr wrote:

    Only he can remove it, summer and refer to the page. How make it past this page?

    Looking at the screen of AppWorld. You must close that and go to the real application icon.

    Check your download folder.

  • Does not start blackBerry Smartphone App World on Curve 9300

    I received a notification that Blackberry World 4.3.0.32 was available on 21 May.  Has launched the process of update, but was informed that I didn't have enough memory available to move forward.  Cleaned space and tried again... without success.  Now world BB does not start (no error message just remains to the home screen).

    I reinstalled via 'http://ca.blackberry.com/apps/blackberry-world/download.html'.  Everything was going well an installation process, but it does not solve the problem.

    O/s version 6.0 Bundle 2647

    Current installed App World - 4.3.0.26

    I did the usual, including the "pop drums" restarts, but to no avail.

    Hey docollyer,

    Thanks for the reply.

    I would suggest to create a backup of your data through BlackBerry Desktop Software (device > backup).  When finished, and then follow the steps in this Article: www.blackberry.com/btsc/KB14058 and test BlackBerry World before you restore all the data.

    Let me know if you have any other questions.

    See you soon.

  • BlackBerry smartphone app update questions / BB curve 9360 Apollo

    Hello, Im new to this forum and Id like some help with my new BB

    Here's the thing, I'd like updating my OS to a version more recent version is 7.0 Bundle 1680 (v7.0.0.353) and
    When I try to update BB desktop app, it's say there isn't any new available worm.

    So I see there are diff version available, but I'm not sure to install for example BONES (v7.1.0.912) T-mobile, OS of Bluegrass Cellular and O2 UK 7.1.0.861 release 7.1.0.821 (Bundle 2301)

    What is the best for my phone?

    And my phone is unlocked, I need to unlock it again if I update the OS?

    Hello and welcome to the community!

    The easiest way is, on a PC (you can not do on MAC):

    1) uninstall all the BB OS packages from your PC,

    (2) make sure you have the BB Desktop Software already installed

    (3) download and install to your PC, the BB OS package you want:

    4) remove, on your PC, all copies of the SELLER. XML... There will be at least one and maybe 2, and they will be located in the same way or to (it changes based on your version of Windows) these files:

    • C:\Program Files (x 86) \Common Files\Research In Motion\AppLoader
    • C:\Users\(your Windows username) \AppData\Roaming\Research In Motion\BlackBerry\Loader XML

    (5) run the Desktop software and connect your BB... the software should offer the operating system package you have installed on your PC. If, during the process, your BB votre BB a '507' error, simply unplug the power cord of the BB USB and reinsert it. do nothing else... This should allow the installation to continue.

    Do not forget to save.

    If you are on a MAC, you are limited to only your sanctioned carriers OS packages... but can still use any level they currently have to sanction. See this procedure:

    • KB19915 How to perform a clean reload of the smartphone BlackBerry using BlackBerry Desktop Software application software

    Jc18able wrote:

    And my phone is unlocked, I need to unlock it again if I update the OS?

    Nope... once a device is unlocked to the carrier, only the plant BB can (legally) re - lock.

    Good luck and let us know!

  • Smartphones blackBerry podcast app

    I'm using BB BOLD 9700 and I want to use any podcast app

    I found a nice soft Web site global apps BB (blackberry podcasts app), but it says that my phone doesn't support it, even if my phone has all the requirements written on the same Web site

    the BlackBerry Podcast app is available in some countries (currently, US & Canada):
    http://appworld.BlackBerry.com/WebStore/content/13125

  • BlackBerry App GPS app

    Y at - it an application that uses data to determine where you are and update directions?

    We have just released an offline for BB10 gps navigation app.

    There is a free trial of 7 days for those who want to take for a spin.

    I will provide more information and answer questions if anyone is interested

  • Golf GPS apps blackBerry smartphones

    Golf GPS applications will work with the BB 9800 and what is the best?

    I checked with RIM and they sent me this site to download gps nrange:

    http://www.nrange.com/testdownload/storm.php

    I downloaded it and try it will test once it stops raining.

Maybe you are looking for

  • The OCZ SSD compatible with my Qosmio x 500

    Hello A few weeks ago conlins gave me lots of explanations about the SATA series. Today, I found the perfect SSD for my computer:* OCZ Vertex 3 Max IOPS 120 GB SSD SATA III (VTX3MI-25SAT3 - 120G) *. Do you know if these devices are perfectly compatib

  • Why Labview runtime is not backward compatible?

    Hello I tried to run a Labview program compiled by a license for Labview 32-bit 2013 on a 64-bit Windows PC with 64 bits 2014 runtime engine. Unfortunately, there no law and required me to install a 32 bit Runtine engine in 2013. I thought that if a

  • menu Server visa

    I can't see the menu Tools/visa visa server. All I see is the General and conflict Manager settings. It is visible on my other system. Any ideas?

  • Cursor jumps all over the place as I type

    Hi, I have an Acer Aspire laptop computer 5733Z and most recently, my cursor jumps around while I type.  Anyone who has encountered his problem and if so, is there a solution?

  • Pavilion dv6-es3045: 8 GB memory installed, 3, 93GB available

    A greeting to all. First I want to apologize for opening a new thread for this question, but after research and reading several possible solutions in this forum and elsewhere, I was not able to find someone, at least in my case. According to the manu