menu Server visa

Similar Questions

• MAX crashes when you try to connect to the remote server in VISA

  Hi, I'm running a problem with MAX OR when trying to setup of a client/server VISA system.  I had the first server tried 4.3 visa but she not even me would record the port on the server settings.  When I tried to connect to the server from a remote machine to access the RS232 ports, it could hang NI MAX or do nothing, depending on how I tried to implement.  If I click with the right button on the remote system in the right configuration pane and follow the wizard through, it doesn't matter, if I go to the toolbar tools-NI-VISA options and follow the wizard, NI Max crashes at the end.  Then I went online and got the version 4.4.1 and tried with the same results.  I also have abnormalities in safeguarding some configurations OR max leading me to question if there are questions of privileges.  The operating system is Windows XP Pro with Service Pack 2 on all machines.  I'm logged on with administrator rights and everything seems to have full read/write privileges, but I still have problems.  The issue of saving the port settings, I tried manually setting the parameters, as described in

  http://digital.NI.com/public.nsf/allkb/8EBAEC8A57BB48BE862574F90072D3DD

  but unsuccessfully in version 4.3, but it worked very well when I upgraded to 4.4.1 without modification of rights or privileges so some things seem weird.  Any help would be greatly appreciated.

  Hardware Dell with Windows XP Professional and SP2 computers

  The server computer has a 16 port Rocket port RS232 port Council

  I will access ports with a program written in LV7.1, but I haven't gotten that far yet

  Network is fine, I can ping the server to the client computer and permissions are set on the server and the client is pointing the right machine.

  Thank you

  CS

  Thanks for the reply.  We use MAX 4.5 so it wasn't the problem.  We are not exaclty sure what the problem is / was set apart he healed himself when we all uninstalled and deleted the VXIPNP directory and reinstalled everything.  When we did, everything came and worked as it should.  One thing that may or may not be relevant, is when I was put in place of the customers, I went through the Options Tools - NI of VISA-VISA to complete configuration rather than right click on remote systems.  Previously, this would cause MAX to crash when you complete the wizard if I though it would be a good test when I put first and, since it worked, I followed this procedure on the rest of the computers.  Anyway the problem is solved and it works.  Thanks again for the input.

• Video podcasts and Apple TV menu problem

  Just bought the Apple TV 4 and I have two problems with the Podcasts.

  If I go to Podcasts, it displays the search box. Once I chose a podcast, it loads the menu of videos for this particular podcast.

  Problem 1: When you play a podcast, I can hear the audio, but I can't see the video. The video does not appear to load. I tried several different podcasts and it's the same problem for each of them. I can hear the audio, but there is no video.

  Problem 2: once I've selected a podcast, there is no way to return to the menu to search for podcasts. If I press the button "menu" on the remote control, need me all the way out in the upper level for Apple TV menu. Then when I select new podcast, it brings back me to the last podcast I was trying to see. It's very frustrating that I can't reach the menu "search for podcasts" again. If I restart the Apple TV, and then click podcasts, it displays the page "podcast search' again. But once more, as soon as I select a podcast, there no way to return to the search screen. Yet once, by pressing the "menu" button the remote takes me all the way back to the top level for Apple TV menu.

  How can I solve these two problems? Thank you.

  Perhaps podcasts are audio only? It says in the info on the right side when you are in the menu for a given set.

  When I hit the Menu button, I need go back to a single page, as usual. Are you sure that you do not use the Home button? And, when it is on the main page of podcasts, I can use the top menu to visit the different choices.

  You have successfully updated at the last tvOS 9.2.1?

• How a cRIO can access remote systems VISA resources?

  I have a NI 9871 RS485 module on an ethernet 9148 RIO.

  I have also a laptop and a cRIO 9073.

  I can access each of the 9871 serial ports on the computer but not the 9073.

  When you try to access it from the cRIO, I get error:-1073807192, VISA: (Hex 0xBFFF00A8) is denied access to the resource or to the remote machine. This is due to the lack of sufficient privileges for the current user or the machine.

  How the cRIO can access the serial ports of the module 9871 on the ethernetRIO?

  Or how a remote access cRIO visa resources?

  Or how a cRIO can have sufficient privileges to access remote resources from visa?

  Thank you for your help.

  LabVIEW 2010 & VISA 5.1 on pc

  NOR-RIO 4.0 and 5.1 VISA & NI 9871 SERIES scan engine support on cRIO and eRIO

  Hi Woss,

  It is possible that your RIO Ethernet has some parameters of active access which is to prohibit the connection to serial ports.  You can change these settings in a position and Automation Explorer (MAX) for your device by going to the device under remote systems, expanding the category of software under it and choosing NI-VISA.  There will be a tab in the right pane of MAX called Options of VISA.  In this tab, select Server VISA > security to access these settings.

  From there, you should be able to add the IP address of the RIO device that needs to access the VISA on the RIO Ethernet server.  Once you have changed these settings, just click on register at the top of the window and allow the unit to restart.  Let me know if that helps!

• How to start the wizard for the Driver NI-VISA development

  IM reading this manual:

  http://zone.NI.com/DevZone/CDA/tut/p/ID/4478

  I have labview8.6 on this pc, and I installed the driver NI-VISA 4.6... the manual says:

  "" "" 1. to open the DDW, select Start ' programs ' National Instruments ' VISA ' VISA Driver Developer Wizard.

  but the thing is, the menu of VISA, there are a few documents... There is no VISA Driver Developer Wizard... but I installed the driver NI-VISA 4.6... any ideas?

  In fact this explains the problem. You install DURATION VISA. If you re-run the installation program, you will see the feature tree seems different from that displayed a stone.

  The component you need, driver development Assistant, is in full VISA distribution, which you can download from the link below. The runtime is usually designed for deployed application. The development tools are absent of the runtime and are in the full distribution.

  http://Joule.NI.com/nidu/CDs/view/p/ID/1370/lang/en

• SQL Server 2008 R2 developer: this version include and allow to use ssrs, ssis and ssas intended for a single user?

  This version includes and allow to use ssrs, ssis and ssas intended for a single user

  Hi mikeyjoy,

  For questions about SQL Server, visit the Forums for SQL Server.

  Thanks for posting your question in the Microsoft answers Forum.

• How to completely remove the SQL Server 2008 R2 from my system?

  I got the SQL Server loaded on my computer before I realized it was the express edition that I needed. When I tried to load the version I needed the computer said that I had to create a new instance for the second version to run simultaneously. (had already uninstalled the original SQL Server and did not not the problem.) I went through the steps again and somehow there is the menu server must remove files, but they can access it. The only solution I see at the moment is to reload the server and uninstall and I hope that everything that caused its not completely withdraw from my system is corrected. Please tell me there is another solution which has guaranteed results.

  Hi Avendia,

  Your question would be better asked on the SQL Server forum

  SQL Server Forum
  http://social.msdn.Microsoft.com/forums/en-us/category/SQLServer

• Continually, I get the error that cannot reach the server while trying to install SP1.

  Win XP Pro reloading, get all updates

  I reinstalled Windows XP Pro and need to update to SP1 to 3 as well as all security updates.  (After download) installation, SP1, I continually get the error that cannot reach the server, visit Web of MS for a version that requires no web access if the problem persists. I can't find this version of SP1 that does not need to happen on the server from Ms.  In addition, isn't there an easier way to get all updates when you perform a new installation instead of going one by one with all the updates?

  If you have SP1A, then you can go straight to the installation of SP3.  If you have SP1, then you need to install SP1A or SP2 before going to SP3.  You can get the updates described in the following article:

  "How to obtain the latest Windows XP service pack"
    <>http://support.Microsoft.com/kb/322389/ >

  HTH,
  JW

• Cannot access server behaviors,

  How can I activate the sign in the menu "server behavior +? I can't get access to it. I want to create a connection in the page, as explained in the following link

  Using Dreamweaver | Building a login page

  but I can't access anything whatsoever! I get this:

  

  What I have to install something? Help, please! I use Dreamweaver CS6 for mac.

  Thank you very much!

  ESI

  You already have installed server behaviors, if you haven't, you wouldn't have the server behaviors panel.

  The extension exist is because the server behaviors panel and all the behaviors themselves, have been removed completely from the program in later versions because the created code was outdated and should no longer be used on modern servers being given the best methods that exist now.

  You have a defined site and a set local test server in place?

• Carousel component and stand-alone Weblogic server problem.

  Hello! I have a problem after I deployed my application on stand-alone Weblogic Server. There is no error when I do the same local Weblogic Server. So, let's discuss.
  
  My App is deployed to new stand-alone WebLogic Server. I have the page with carousel cpmponent, when I visit I can see: http://my.jetscreenshot.com/2677/20101020-bvow-82kb
  
  When I navigate to another page by pressing the 'BACK' button, then I go to the master/detail page, see: http://my.jetscreenshot.com/2677/20101020-casn-19kb
  
  I see no data in the detailed form, but the data should be there. And when I try to navigate this page with buttons next, previous and so on, then I got an error in the browser, see: http://my.jetscreenshot.com/2677/20101020-cugj-20kb
  
  If I do the same scenario in my local server, then there is no problem.
  
  An interesting thing is that when I restert my stand-alone Weblogic Server and try to visit my pages in different order app - first visit master detail form and him visit my page to view carousel, so I have no errors. And after that I try to get my application by first scenario and no errors. So if I post the stand-alone deployment first visit master/detail form, then carousel. So before my app works well, but if I first visit page carousel after deployment stand-alone weblogic server. Then forward, I have problems as I said.
  
  The problem is the carousel component. If I delete and make the same scenarious on the stand-alone server, then there not a problem as I have menthioned before. ANY ideas what is wrong and why everything works correct on the local server?
  
  If you need more information, please let me know! Moreover, here you can download my App and try to deploy it to your own stand-alone Weblogic Server, app is here: http://www.failiem.lv/down.php?i=fwgzym & n = Test_carousel_in_standalone_weblogic_server.zip
  
  After downloading, run the scripts in the database project (see: http://my.jetscreenshot.com/2677/20101020-akcx-16kb)
  
  And after deploy you my application on STAND-ALONE weblogic server, visit the ViewCarousel.jspx page and in press the 'BACK' button and see what happens.
  
  Hope for your answers, cordially, Debuger!

  Debuger,
  of course, I ran your use case. And it worked on my environment.

  OK, my guess is that you hit the Bug 9183113. Brief summary, is that if you use createRootApplicationModule (...) outside the binding of the adf, the chances are that you break links to the other parts of the application that use the same definition of application module. In your test cases, you use createRoorApplicationModule (...) to stream image via a servlet in the browser. You use the same definition of application to the ruin of the application module. Sometimes it breaks resulting in the "no data found" links you see.

  The work-around, I found as it is to ensure that the servlet you use createRootApplicationModule, runs through the filter adfBindings. It worked for me, so give it a try.

  Open your web.xml file, select "Filters" and then in the table "adfBindings". In the tabs below the table select "filter mappings. He see you on entry fro "Faces Servlet". HJit green '+', select 'Servlet' as "Mapping Type", in the column mapping use the drop down arrow and select your 'ImageServletCarousel', 'Distributor Type' column select the checkboxes for 'Before' and 'ask '.
  Do the same for other servlets image you use and save your work.
  Recompile and build a new EAR and deploy it. See if that fixes your mistake.

  Timo

• Dynamic list/Menu crashes program

  Is there a solution to the problem of Dreamweaver crashing whenever I try to add a dynamic list?
  
  The form is in an editable region of a template. It authenticates users in the model. I have three sets of records for the page.
  
  Normal lists work very well. As soon as I select "dynamic", the program crashes. When I select "dynamic list/menu" server behaviors, it crashes too.
  
  Thank you

  KBwebpro wrote:
  > Is it a solution to the problem of Dreamweaver crashing whenever I try to add a
  > dynamic list?

  http://www.Adobe.com/go/kb402776

  --
  Adobe Community Expert David Powers
  Author, "The Essential Guide to Dreamweaver CS3" (friends of ED)
  Author, "PHP Solutions" (friends of ED)
  http://foundationphp.com/

• How to completely turn off Firefox update reminders?

  I don't want to upgrade callbacks. At any time. Never.
  When I decided to spend some time in the future, I will use the manual upgrade.
  How can I do?
  Thanks in advance.

  Hello

  • 1

            Log on to an administrator account or the account used to install Firefox.
          * 2
  

            Open a Firefox browser window.
          * 3
  

            Locate the browser's menu. Select "Tools" and "Options" and wait for the pop-up window to appear. Choose "Advanced" and "Update."
          * 4
  

            Find the portion of the "Update" section that reads "Automatically Check for Updates to..." and uncheck "Firefox." You also have the choice of deselecting "Installed Add-ons" and "Search Engines." If you decide to uncheck the other two, Add-ons and Search Engines will not be checked for updates, either.
          * 5
  

            Verify that the "When Updates to Firefox are Found..." section grays. A gray section means that the section is no longer relevant and that updates will no longer be checked.
          * 6
  

            Click "OK" and enjoy an update-free Firefox web-browsing experience.
          * 7
  

            Select "Help" and "Check for Updates" in Firefox's menu or visit Firefox's official website regularly to check for new updates. Firefox should always be updated to the newest build so that security features are installed and you and your personal information remain protected while on the Internet.
  

  I hope this helps!

  Curtis

• What exactly does a VPN do?

  I just set up a VPN using OS X Server on a Mac Mini!

  Feeling pretty proud of being given that all my attempts in the past have not led to anything, but now that I put it in place, is it in reality? I was under the impression that if I am away from my home network, I would be able to see my desktop computers or maybe be able to sync to my iPhone via the iTunes wifi synchronization feature, or maybe file transfers, screen sharing, access my Tivo using the records of iPhone app and watch with him... So far I was not able to do this. I know using a VPN is MUCH safer in public hotspots, but felt like having him many more benefits.

  So please help me someone!

  Thanks in advance!

  Josh

  You're sort of on the right track.

  Take a common scenario - your home network is led by a router (either provided by your ISP, or a third-party device), which uses the (NAT) network address translation to share a public IP address among multiple devices on your internal network. This means that your Mac, your phone, your iPad, your smart TV, Blu - Ray player, printer, etc. are all connected to the private LAN and can get out to the internet through the wider NAT router.

  NAT also prevents external devices to your internal network - so no remote users can print to your printer, etc.

  With a VPN, you bust essentially a (small) hole through the NAT device to your device remotely, on a public network in some coffee shop downtown, has a connection to the private internal network. It's just that it is on the internal network, but as a second class citizen.

  This means that when it is connected through the VPN, you can, indeed, access all internal resources you could if you were physically at home - you can print on your printer, copy files to and from a file server, etc..

  The witch hunt, it's that, normally, and for valid reasons, the automatic detection does not work through the VPN. This means that when you are in the Finder and you try to connect to a home server, you can not see the server in the Finder sidebar. If you start screen sharing, you won't see the other hosts of the network as being "available". In order to achieve this level of interaction, you must know the address of the host (s) on the internal network. If you know the address of your file server, for example, you can use the Finder go-> Connect to the menu server, enter the address and connect. It just does not happen automatically. Even if you want to stream your TiVo, you must know the IP address of your TiVo (assuming that the TiVo app allows you to specify an IP address and is based not only on local Autodiscover).

• iCloud address Alias address sending to iCloud

  It's weird: something changed recently - right at the beginning of the 2016 - with respect my iCloud.com E-mail address.  There seems to be something very specific, although I do not know how some (still at the experimental stage).

  My mother and I have iCloud.com addresses...

  • Until ~ from 2016, we could send the Email back very well, but now his address iCloud.com E-mail can no longer receive E-mail from my iCloud.com E-mail address.
  • I have, however, peut still receive E-mail from his address iCloud.com.
  • As far as I know, I will have no problem sending and receives from other email-addresses iCloud.com using my icloud.com address.  I can send and go to the old AT & T address, for example.
  • My Email iCloud.com is actually an alias for a former, less ideal me.com address and I'll have no problem send and receive emails with address iCloud for my mom (or other address) using this original base address.
  • The problem seems to be limited to iCloud address my mother receives the email from my address iCloud, which again is an alias of my old base of me.com address.
  • I do not know if it is expressly limited to the address of iCloud my mother receives the email from my address iCloud.  I'll have to find someone else with an iCloud address to see if I can send their fine also.  Without a doubt I can find such a person at the local Apple store, but have not had the opportunity to try again.

  Someone has seen something like this before?

  Hi mr88cet,

  I understand your question right now is specific to you not being able to send your email to alias @icloud.com to your mother.  The resources below is a good starting point.  Make sure that your email address is not blocked for any reason any on your MOM's computer.  You can also try to remove your details from your MOM computer or peripheral, re-add the information with only the address @icloud.com.  Then, send an email to test and see if she gets.

  I've highlighted the key of the iCloud resource information.  Click on the link for more details.

  Get help using iCloud Mail

  If you receive an alert when you send a message to your e-mail address of @icloud.com using Mail on your Mac.

  "This message could not be delivered and will remain in your Outbox until it can be delivered. Is the reason for the failure: an error occurred by delivering this message via the smtp server: server name. »

  1. Open Mail and choose Mail > Preferences.
  2. Click the tab accounts.
  3. Select your iCloud account.
  4. Click on the account information tab.
  5. Choose your iCloud account in the menu Server outgoing (SMTP) mail. If you choose to change the list of SMTP server, you won't see your iCloud optional SMTP server.

  If your recipient does not receive your message

  1. If a "address unknown" or "undelivered mail returned" message appears in your Inbox after sending a message, go to your sent mailbox and make sure that the e-mail address of the recipient is correct.
  2. If you use OS X Mail or access your iCloud email using Safari or another web browser support, see your drafts, send, send and mailbox store:
     • If you see a copy waiting for the message in the drafts, try to send it again.
     • If you see the message in your Outbox, make sure that you are connected to the Internet and follow the steps above to Select the SMTP to iCloud.
  3. Ask the recipient to check their records of junk mail or mailboxes.
  4. If your recipient does not always receive your message, but your message was sent without alerts or "non-delivery mail" messages, your message might have been blocked or filtered by iCloud mail servers or the recipient's e-mail server. To discover, communicate with support for iCloud.

  iCloud: on the email alias

  Happy new year!

• Unable to connect target RT in the LabView project

  Hello

  I use time LabView real-time 8.5 on a desktop PC. I see the target at MAX where I can change the network settings on the target and use FTP without problem. But it is impossible to connect to the target in a LabView project.
  The error of the target journal wrote:
  ####
  #Date: Monday, June 9, 2008 03:04:29
  #OSName: PharLap
  #OSVers: 13.0
  #AppName: PH_EXEC
  #Version: 8.5
  #AppKind: AppLib
  #AppModDate: 09/06/2008 06:55 GMT

  LVRT. DLL loads the address: 0x003EE000

  Can someone help me?

  Thanks in advance

  Hello everyone.

  The problem is solved! The reason of my problem is that LabView RT 8.5.0 supports no more than 2 GB of RAM installed on the computer, as described in this document.
  My RAM GB setting the things that were not possible before:
  -to connect to the target in a LabView project and deploy the code.
  -to activate the multiple core processor in the BIOS of the machine

  I said that the withdrawal of the USB keyboard is useful. Indeed with my keyboard plugged in, when I install other software as server VISA for example, MAX do not recognize the target automatically, I have to add it manually by specifying the IP address and I can not connect to the target in a project of LV.
  Unplug the USB keyboard (and other devices) to solve this problem.

  Good day...