BlackBerry Server - specific requirements?

Similar Questions

• What is the role of BIS blackberry server blackBerry smart phones?

  What is the role of BIS blackberry server?

  I need the answer in detail?

  Thanks in advance

  Chloe wrote:

  See BIS blackberry internet service... It's just like an ISP = Internet service provider...

  Hello

  In fact, not quite "like." An ISP provides a primary internet connectivity to a computer/network, with often other services (e-mail, web and other accommodation). Latest BBs can, with no BIS-level service and with WiFi only, accessing the Internet fine for browsing the web and some other services. In addition, many can, with just a generic data plan, access the same things via the data network of the carrier. But certainly not BB exclusive services (e.g., BBM, email, BB Protect, etc.) works not at all... all the exclusive services of BB require subscription to a package of adequate data of the mobile operator.

  There are many different levels of BIS plans... There are hundreds of carriers in the world, some with dozens of different BB data plans available. Some provide email and social networks only, but not web browsing. Others provide web and internet, but not the social networks. And there are quite a large number of variations in the light of all the exclusive services of BB. But, in all cases, they are provided by BRI... then BIS itself is the overall framework of the exclusive services BB, with plans of carriers of data allowing the various combinations of these different services available... all depends on what the user subscribes to with their mobile service provider.

  Hope that helps!

• Unable to receive push blackberry server messages

  I'm not able to receive the push server Blackberry messages.   But I'm able to get electronic twitter

  Here are my logs. Is there a problem of Blackberry server now

  Push service that you use does not at all use the BES. The problem may be related to the fact that you use the App ID in the URL when you shouldn't be.

  URL used:

  https://CP.pushapi.eval.blackberry.com/mss/PD_pushRequest

  URL, you must use:

  https://cp2936.pushapi.Eval.BlackBerry.com/MSS/PD_pushRequest

• Specific requirements of VPN tunnel

  Hello

  A partner of business (BP) has some specific requirements for VPNS. By the (BP), configuring vpn on my Cisco ASA (825) must have the following:

  The remote gateway (BP) must be set to 0.0.0.0 - this is what concerns me.
  Any unwanted question could occur on the SAA for the other tunnels or routing by setting the crypto map peer and tunnel-group for that specific tunnel 0.0.0.0?

  My side of the tunnel must be set to passive IKE (answer only). No problem with that.

  Thanks for any advice provided on this subject.

  Hello

  In case they ask that you agree to any public IP address as the counterpart because that their IP is dynamic, you need to configure a dynamic to the tunnel site-to-site static in this way you can accept their connection to your ASA.

  You will need to use the default tunnel group and configure the preshared key, it shouldn't affect other tunnels, because if the other tunnel is static, you have created a more specific tunnels for this particular peer

  Here is a document allowing to explain this dynamic to static configuration of a site by using ASDM and CLI

  http://www.Cisco.com/c/en/us/support/docs/security/ASA-5500-x-series-NEX...

• Smartphones Blackberry blackBerry server not connected

  My blackberry server does not work - outside of WIFI areas, I don't get emails and none of my apps don't work, however my internet still works? My phone is like that for a few weeks now - I tried to call my mobile service, who put me through a blackberry person, but it's still not better. I would really appreciate the help. Thank you.

  Hello and welcome to the community!

  The first message you received indicates that the request was made, but nothing will work properly until the response is received. It is a problem between your device and your carrier data network (Tesco)... you need to contact them for assistance.

  Good luck!

• Why MS SQL server is required for installing vcenter?

  Why MS SQL server is required for installing vcenter?

  You need a database to contain the vCenter Server information. It may be SQL/Oracle. By default, an installation of SQL Express happens if you do not want to install a complete SQL Server blown - it will have maximum but limits work for smaller infrastructure.

  Exact wording of the documentation:

  vCenter Server and vCenter Update Manager require databases to store and organize the data from the server.

  Each instance of vCenter server must have its own database. vCenter Server instances cannot share the same database schema. Several databases of vCenter Server can reside on the same database server, or they can be split between multiple database servers. Databases Oracle, who have the notion of schema objects, you can run several unique vCenter Server instances in a database server if you are the owner of a different pattern for each instance of vCenter server, or use a server of Oracle database dedicated for each instance of vCenter server.

  You don't need to install a new server database for the vCenter Server installation to work. During installation, you can point the vCenter Server system for the supported existing databases. vCenter Server supports IBM DB2, Oracle and Microsoft SQL Server databases. vCenter Update Manager supports Oracle and Microsoft SQL Server databases. For a list of supported database server versions, see the vSphere compatibility tables tohttp://www.vmware.com/pdf/vsphere4/r40/vsp_compatibility_matrix.pdf on the VMware vSphere documentation Web site.

• Error the server behavior requires a ColdFusion Data Source

  I'm probably way behind you all, but I make the shot the book ColdFusion 8 and Chapter 4 tutorial. He tells me to link by clicking the sign + on link, then the message: this server behavior requires a Data Source ColdFusion please check the database for more information on how to create a.
  When I do I go to the administration and the cfartgallery data source tool is all ready and I can check it out and get the OK
  The book is "web application construction Kit Volume1 for Coldfusion8.

  I don't know what else will explode, but I looked at the display of the address and it was empty. When I added Art.cfm and click on the + I got the screen the tutoral asked? Off, I again.

• Windows Home Server - Hardware requirements

  Good afternoon

  I am interested in creating a solution of Windows Home Server. I bought a Windows Home Server 2007 OEM media with the intention of creating my own solution, but never got around him a few years ago. My question for the community is the following: what are the hardware requirements for this solution?

  For me, it's a question I think I should know, but for some reason any I am at a loss! I think I need at least 2 computers. The first is the server itself, the second is a stand-alone computer that connects to the network.

  If you can give me some of the basic information I should know before diving into the Home Server I would really appreciate it. If you have all cards/articles that can help you with representation on what I need to do this would be as phenomenal.

  Thank you in advance!

  I confess that I've never used WHS and have no idea about it but. I did some research on Google and found this: http://homeservershow.com/full-tutorial-on-how-to-install-and-setup-whs-version-1.html introduction which then link a fuller version here: http://www.howtogeek.com/howto/9659/how-to-install-and-setup-windows-home-server/

• Is it possible to direct "log entry" for a syslog server-specific ACL?

  R1 (10.177.142.1)---f1/0 R2 f1/1---(192.168.1.3)R3

  I want to apply a mild access list on R2 only in order to connect
  entries and let me evaluate and find out how many users help
  TELNET, www, and 3389 (RDP thing) protocols
  from R1 go to R3. I can't block all traffic yet.

  So my journal on R2 works accordingly to log for TELNET, www, and RDP - OK entries.

  Question:
  Imagine I want to capture these logs for about 2 weeks and then analyze output such as
  source IP that generated these topics can you please tell me what is the
  best and easiest way to capture this in the newspaper to allow later analysis? I can put a syslog
  IP of the server that will be used only by this specific ACL WATCH_PROTOCOL?

  #show R2 access-list
  Expand the IP WATCH_PROTOCOL access list
  permit tcp everything any eq 3389 journal - entry (2 matches)
  permit tcp any any eq telnet log entry (36 matches)
  permit tcp any any eq www journal-entry
  permit ip any (226 matches)
  R2 #.
  R2 #show run | Access-Group Inc.
  IP access-group WATCH_PROTOCOL in
  R2 #.
  R2 #.
  00:14:38: % s-6-IPACCESSLOGP: list of the permitted tcp 10.177.142.1 WATCH_PROTOCOL (11
  008) (FastEthernet1/0 ca01.0e80.001c)-> 192.168.1.3 (23), 1 packet

  R1 #telnet 192.168.1.3 80
  challenging 192.168.1.3, 80...
  Connection refused by remote host %

  R2 #.
  00:14:38: % s-6-IPACCESSLOGP: list of the permitted tcp 10.177.142.1 WATCH_PROTOCOL (11
  008) (FastEthernet1/0 ca01.0e80.001c)-> 192.168.1.3 (23), 1 packet
  R2 #.
  R2 #.
  #show R2 access-list
  Expand the IP WATCH_PROTOCOL access list
  permit tcp everything any eq 3389 journal - entry (2 matches)
  permit tcp any any eq telnet log entry (36 matches)
  IP to allow all (67 matches)
  R2 #show run | Access-Group Inc.
  IP access-group WATCH_PROTOCOL in
  R2 #.

  This sounds like a job for Netflow.  I have provided links to the following documentation:

  Netflow configuration (12.2 mainline):
  http://www.Cisco.com/en/us/docs/iOS/12_2/switch/configuration/guide/xcfnfc.html

  flow-tools (to analyze netflow data):
  FTP://FTP.Eng.oar.NET/pub/flow-tools/flow-tools-0.66.tar.gz

  PowerPoint, linking the two:
  http://ws.edu.ISOC.org/workshops/2008/apricot2008/NetManage/presos/NetFlow/apricot-flow-tools-slides.ppt Let me know if this can help,

• Not connected to the BlackBerry Server blackBerry smartphones

  Whenever I have do hard reset, the tour of my device or reboot after uninstall an application is not registered on the network. He pushing me race frequently diagnosed or registry HRT and need to wait for the BlackBerry registration message within 1-15 minutes late. I'm sure have no problem connection in my new carrier. Another question is to receive strange messages from my auto PIN code and can invite my auto PIN code. Picture below was published, my PIN is to the profile page.

  

  

  

  

  

  

  

  Since you have switched carriers, sure to ask very detailed if you really receive services BIS on their part. When you change carriers, your BIS service is supposed to automatically shift by the prior carrier. But this still does not work properly. If, for example, delivery has not published their system of BIS BB PIN, then the B carrier cannot deliver the BIS service to you... This is not possible, a BB PIN can exist in system BIS only carrier anywhere in the world at any given time. And, if the automatic change of the carrier B did not, then you might still receive BIS of the courier service, even if you run on carrier network B... some carriers block traffic to other carriers BIS on their network, other carriers allow. Generally, after some time, the original media figures they are delivering the services that they are not paid for and close... I've heard some long time, 3 months or more, where this may occur. But there is no way for everyone but the carriers to explore this possibility for you.

  I suggest to solve the problems of service BIS first and make sure you receive full-service carrier b. BIS if all goes well, their network is capable of delivering BIS with your specific BB model number... no support for carriers, all the model numbers of BB for AutoShip of HRT and maintenance book each supports only a subset, and if the specific model of your BB number is not automatically managed by the network carrier Bs, then they will not be able to offer you a service anyway BIS. And once the driver to stop you (assuming that this theory is correct, of course), then you will have no BIS service at all.

  So, I suggest that you talk to carrier B (and perhaps even A carrier) to be sure that your services are all fully evolved over the carrier B and B carrier fully supports your specific model BB for automatic delivery of HRT and service book. Once this is resolved/insured, then it would be logical to try and diagnose other things. But, first of all.

  Good luck and let us know!

• Help blackBerry Smartphones RIM required expert

  Can someone explain why this is happening. In brief on my Storm, I can't get full blackberry service so that in a call on the network, but everything seems to work ok while the phone is in mode only GPRS

  Here are some from my Blackberry to al72al network diagnostics

  The first is when the phone is on Auto to select network and set to 2g & 3g network settings
  
  Departure time: December 13, 2008 22:28
  End timestamp: December 13, 2008 22:28
  PIN: 20cb *.
  MSISDN: 07500 *.
  Type of device: BlackBerry 9500
  Application version: v4.7.0.78
  Platform Version: 4.0.0.98
  Service books: WAP, WAPPushConfig, WPTCP, here, PDAP, YHO, BBIMConfig, here, BBIMConf
  IG, OTASL, LbsConfig, VIRGINIA, VIRGINIA, BBIMConfig, BISClientConfig, here, BrowserConf
  IG, here, APPCTR, here, here, here, here, B
  rowserConfig, here, here, here, here, PDAP, took PLACE
  ONING, CMIME, CMIME, CICAL CICAL
  Free file space: 40350592 bytes
  Activation of radio data: Yes
  Signal level:-77 dBm
  Radio access: UMTS
  Network: vodafone UK
  IP address: 10.76.168.56
  Ping ICMP echo: Yes
  BlackBerry registration: No.
  Connected to BlackBerry: incomplete
  BlackBerry® PIN E-mail: incomplete
  Server name: GBISXEUC00S05
  E-mail address: [email="***@gmail.com"]***@gmail.com[/email]
  Connection to [email="***@gmail.com"]***@gmail.com[/email]: incomplete
  Server name: GBISXEUC00S11
  E-mail address: [email="***@mobileemail.vodafone.net"]***@mobileemail.vodafone.net[/email]
  Connection to***[email="to***@mobileemail.vodafone.net"]@mobileemail.vodafone.net[/email]: incomplete

  The second below uses Auto network select but selected 2G only
  
  Departure time: December 13, 2008 22:29
  End timestamp: December 13, 2008 22:31
  PIN: 20cb *.
  MSISDN: 07500 *.
  Type of device: BlackBerry 9500
  Application version: v4.7.0.78
  Platform Version: 4.0.0.98
  Service books: WAP, WAPPushConfig, WPTCP, here, PDAP, YHO, BBIMConfig, here, BBIMConf
  IG, OTASL, LbsConfig, VIRGINIA, VIRGINIA, BBIMConfig, BISClientConfig, here, BrowserConf
  IG, here, APPCTR, here, here, here, here, B
  rowserConfig, here, here, here, here, PDAP, took PLACE
  ONING, CMIME, CMIME, CICAL CICAL
  Free file space: 41898488 bytes
  Activation of radio data: Yes
  Signal level:-76 dBm
  Radio access: GPRS
  Network: vodafone UK
  IP address: 10.202.10.69
  Ping ICMP echo: Yes
  Record blackBerry: Yes
  Connected to BlackBerry: Yes
  BlackBerry® PIN E-mail: Yes
  Server name: GBISXEUC00S05
  Email address: * [email="***@gmail.com"]@gmail.com[/email]
  Connection to * [email="***@gmail.com"]@gmail.com[/email]: No.
  Server name: GBISXEUC00S11
  Email address: * [email="***@mobileemail.vodafone.net"]@mobileemail.vodafone.net[/email]
  Connection to [email="***@mobileemail.vodafone.net"]***@mobileemail.vodafone.net[/email]: No.

  The third cellar is with the automatic selection network and mode 2g & 3g. The difference here is that I'm composition 191 at the same time.
  
  Departure time: December 13, 2008 22:41
  End timestamp: December 13, 2008 22:42
  PIN: 20cb *.
  MSISDN: 07500 *.
  Type of device: BlackBerry 9500
  Application version: v4.7.0.78
  Platform Version: 4.0.0.98
  Service books: WAP, WAPPushConfig, WPTCP, here, PDAP, YHO, BBIMConfig, here, BBIMConf
  IG, OTASL, LbsConfig, VIRGINIA, VIRGINIA, BBIMConfig, BISClientConfig, here, BrowserConf
  IG, here, APPCTR, here, here, here, here, B
  rowserConfig, here, here, here, here, PDAP, took PLACE
  ONING, CMIME, CMIME, CICAL CICAL
  Free file space: 41290444 bytes
  Activation of radio data: Yes
  Signal level:-77 dBm
  Radio access: UMTS
  Network: vodafone UK
  IP address: 10.231.122.153
  Ping ICMP echo: Yes
  Record blackBerry: Yes
  Connected to BlackBerry: Yes
  BlackBerry® PIN E-mail: Yes
  Server name: GBISXEUC00S05
  E-mail address: [email="***@gmail.com"]***@gmail.com[/email]
  Connection to [email="***@gmail.com"]***@gmail.com[/email]: Yes
  Server name: GBISXEUC00S11
  E-mail address: [email="***@mobileemail.vodafone.net"]***@mobileemail.vodafone.net[/email]
  Connection to [email="***@mobileemail.vodafone.net"]***@mobileemail.vodafone.net[/email]: Yes

  The third is a bit weird, but excludes a bar of 3G on my account asit connects during the call. Actually the phone to work properly, for example all the emails are linked etc. when the phone log.

  Someone at - it ideas. Any guy RIM support on?

• BlackBerry Smartphones - WIRELESS AND BLACKBERRY SERVER

  I can't connect the server of blackberry via wi - fi. At the top right icon shows a WiFi connected, but the bb logo is not on... I am visiting the United States and have no roaming. I have a BB9900. My wife has a BB9780, and his phone connects very well via wi - fi, with BB applications. Help please!

  Yep, and it should work the same. I did not LEAVE homelessness on continuously while you travel, just do it for 10 minutes and see if that turns your device BIS account while you are on WiFi.

  STAY in touch with WiFi when you do this. Then turn it off.

• Application of blackBerry Smartphones that requires credentials at startup only

  Hello

  I don't know if I'm posting in the right place, otherwise, please my present his apologies. I'm looking for an application that requires credentials only on startup and in case the password is entered 3 times incorrectly, the device is reset.

  I have a BES server and I would like to stress that to be managed from there.

  Is there a software to recommend?

  Kind regards

  POY

  I think that there are four events that activate the locking password.

  (1) the icon screen - locked the BB "we demand."
  (2) the configured time-out value - between 1 minute and 1 hour (at least on mine)
  (3) holstering - you can force it to lock (a selection of the configuration)
  (4) restarting the device

  If all goes well a combination of those that meet your needs. Otherwise, you will indeed get a few add-on (and I somehow doubt that one exists since this security feature is already robust enough and meets the needs of most everyone).

  Good luck!

• BlackBerry Smartphones-system requirements

  Hello

  I have a friend who has never installed the software. The CD that came with the camera is about 2 years old and the version seems to be 4.7. The CD is never beyond the point of initialization. To try to troubleshoot this, all messages seem to suggest the newest software downloaded from the Web site. However, I don't think that his laptop computer meets the requirements. His laptop computer was 1.25 GB of ram, but the processor is AMD Athlon, 797 mhz and 22 GB of free disk space. Operating system is Windows XP (sp3).

  Given all this, what is the latest version of the software able to manage his laptop?

  Thanks in advance for any help.

  Hi and welcome to the Forums!

  The system requirements are described on this page:

  • http://NA.BlackBerry.com/eng/services/desktop/System_Requirements.jsp#tab_tab_6.0

  According to your description, it seems that 5.0.1 is perhaps compatible, but 6.0 can be a problem (mainly because of the speed of the processor).

  Unfortunately, RIM has removed the system requirements for versions older than 5.0.0 although they are still available to 4.7 through this Portal:

  • https://www.BlackBerry.com/downloads/entry.do?code=A8BAA56554F96369AB93E4F3BB068C22

  Good luck!

• VCenter Server 6 requires 2CPU

  Hi all

  I was in the process of upgrading our Vcenter Server 5.5 for Windows which is a virtual machine to the latest version of January of Vcenter Server 6.0 for Windows.

  I went through the installation program and once I accepted the EULA a pop up displays "VMware vCenter Server detected 1 processor (s), 2 processors are required for the selected deployment type. It is not a choice for the type of deployment start with. Everything is installed in the same VM.

  The virtual machine is already at version 10 of VM level. This means that I can't change the settings of the processor in Vsphere Client. The only choice is to change hardware parameters in the Web Client. But when the Vcenter server is down for maintenance of the web client is declining too. The only choice would be to directly connect to the ESXi server and change the parameter directly. However, I can't use the Vsphere Client.

  Have I any other option to change the virtual machine hardware settings?

  What exactly is the requirement, 2 CPU or 2 cores per Socket?

  Thank you

  Edy

  The possibility to change the hardware version 10 virtual machines with the vSphere client was added in to vSphere 5.5 Update 2, so if you download the update client 2 5.5 you will be able to use it.

  Alternatively you could use VMware Workstation to connect to the ESXi host when vCenter is out of service and modify the virtual machine, or use PowerCLI, take a look at edition vCenter VM parameters with Hardware Version 10 | Pelicano computer services