Not connected to the BlackBerry Server blackBerry smartphones

Whenever I have do hard reset, the tour of my device or reboot after uninstall an application is not registered on the network. He pushing me race frequently diagnosed or registry HRT and need to wait for the BlackBerry registration message within 1-15 minutes late. I'm sure have no problem connection in my new carrier. Another question is to receive strange messages from my auto PIN code and can invite my auto PIN code. Picture below was published, my PIN is to the profile page.

Since you have switched carriers, sure to ask very detailed if you really receive services BIS on their part. When you change carriers, your BIS service is supposed to automatically shift by the prior carrier. But this still does not work properly. If, for example, delivery has not published their system of BIS BB PIN, then the B carrier cannot deliver the BIS service to you... This is not possible, a BB PIN can exist in system BIS only carrier anywhere in the world at any given time. And, if the automatic change of the carrier B did not, then you might still receive BIS of the courier service, even if you run on carrier network B... some carriers block traffic to other carriers BIS on their network, other carriers allow. Generally, after some time, the original media figures they are delivering the services that they are not paid for and close... I've heard some long time, 3 months or more, where this may occur. But there is no way for everyone but the carriers to explore this possibility for you.

I suggest to solve the problems of service BIS first and make sure you receive full-service carrier b. BIS if all goes well, their network is capable of delivering BIS with your specific BB model number... no support for carriers, all the model numbers of BB for AutoShip of HRT and maintenance book each supports only a subset, and if the specific model of your BB number is not automatically managed by the network carrier Bs, then they will not be able to offer you a service anyway BIS. And once the driver to stop you (assuming that this theory is correct, of course), then you will have no BIS service at all.

So, I suggest that you talk to carrier B (and perhaps even A carrier) to be sure that your services are all fully evolved over the carrier B and B carrier fully supports your specific model BB for automatic delivery of HRT and service book. Once this is resolved/insured, then it would be logical to try and diagnose other things. But, first of all.

Good luck and let us know!

Tags: BlackBerry Smartphones

Similar Questions

  • Pavilion HPE-414sc: HP Support Assistant does not connect to the HP Server

    HP Support Assistant does not connect to the HP Server. Do not download messages and updates of definition. Does not collect configuration information. Does not scan my system. Does not prepare the action list.

    I installed Windows 10 once again. After installing HP Support Assistant work.

  • HP8600 does not connect to the ePrint Server

    HP8600 does not connect to the ePrint server at all. I double checked all the settings and I can print to it from my applications when you are connected to the same network, but try to access the server of ePrint from the screen of the printer or the web interface cannot establish a connection.

    The printer is connected via a wireless network and can be printed from any device connected to our network.

    Everything indicates that there should be good. But can't seem to make bad connection ePrint. No error message not developed.

    The printer is on a network of b/g/n 2.4 GHz connected to a Netgear N600 DUal Band (WNDR3700 model).

    Version of the firmware of the printer is CLP1CN1232AR

    Any ideas? It does not appear to be blocked by a firewall, so really lost here.

    Hello

    Try to define an alternative DNS and check if that can help you:

    1. Tap the wireless on the top of the screen of the printer and look for the IP address is.
    2. Navigate to throguh IP of the printer, the web browser on your PC.
    3. Click the network tab.
    4. Under, click IPv4 wireless.
    5. Under the DNS Configuration, select manual.
    6. Set the address preferably as 8.8.8.8
    7. Set the e-mail address alternative as 8.8.4.4
    8. Click on apply to confirm the change.

    Now, turn the printer off and turn it back on and check for the difference.

    Shlomi

  • vCenter could not connect to the VSM Server

    I have SanHQ and HIT running well on vSphere 4.1. After upgrading vSphere 5.5 and HIT to 4 VSM, my new vCenter could not connect to the VSM server at all.

    1 VSM ip address must be configured on the management or iSCSI network?

    2. I have 2 vCenters to AC and DC, respectively. In this case, I have to install 2 VSM, each to each site? Note that although my VM networks on both sites and management are all connected via VPN, iSCSI networks are isolated.

    3. is it possible to deploy the VSM 3.5 and 4 so that the two vmware VI Client and Web Client have access to VSM features?

    VSM does not work with Linked vCenters mode so that a VSM would be able to access the two vCenters.

    You will need to deploy both VSMs.

    You cannot run two MSM 3.5.x and 4.0.x at the same time.

  • Can not connect with the Adobe server to upgrade the PS. Tried with fiervall and the router and called my provider. She is also only CC there are problems!

    Can not connect with the Adobe server to upgrade the PS. Tried with fiervall and the router and called my provider. She is also only CC there are problems!

    Check your hosts file.

    help for that and other adobe.com sure common connection problems read, http://helpx.adobe.com/x-productkb/policy-pricing/activation-network-issues.html

  • "acrobat could not connect to the dde Server" when openning Adobe Acrobat PRo XI

    You use Windows 7, removed AA XI, reinstalled after buying last week - same problem.  It does not open and I get this message "acrobat could not connect to the dde server.

    the clues how to get out of the forest? Its very frustrating.

    Help

    [Left the Premiere Pro forum... MOD]

    Hey,.

    You could try to remove all Acrobat processes in Task Manager and then restart Acrobat.

    In addition, please repair Acrobat in the Help menu.

    If you still get the same error, press (Windows + Run) and type "REGEDIT".

    Go to "HKEY_CLASSES_ROOT\acrobat\shell\open\ddeexec\application" and tell me if the given key is AcroViewA10 or AcroViewR10.

    Kind regards

    Ana Maria

  • Could not connect to the administration server.

    Hello... IAM trying to connect to the server of the EAS and Essbase-Essbase administration console server... It's error "Could not connect to the administration server", although all services are running (I kept services such as manual and all the services manually started)...
    A few times I can connect to the console and a few times not... anyone know what could be the error... Thanks in advance...

    Hello

    You can see "Services of Administration Hyperion" as a service. It can show "start" State. But again, reboot by right-clicking on it and try to access environmental assessments.

    Sandeep Reddy, Enti
    HCC
    http://hyperionconsultancy.com/

  • BlackBerry Smartphones Blackberry does not connect to the blackberry World Server

    Hello

    I have a BB9780. I got it as a set of second hand.

    My service provider is Vodacom SA and I propose a package of BIS with them, they confirm that my package of their side has no problem.

    I tried all the tips I've read on this Forum and still nothing helps.

    I enter the BB app world and it tells me that 'Blackberry cannot connect to the blackberry world server.

    Again this is not the side of my carrier form since they confirm that my package is open and usable.

    I can get Temp to the BB app world via WiFi but lose the connection, and this isn't my WiFi as my laptop is still online when I am offline

    Help, please

    Ok. Do not worry about the BES... This is Blackberry Enterprise Service and only for use by businesses. The setting we use is BIS... Blackberry Internet services. Unfortunately many networks will tell users that their BIS is connected when they did not. My advice is to ring the network, tell them where you looked, in the State. She shows very clearly your BIS is not connected and ask them to connect

  • BlackBerry smartphones can not connect to the Blackberry server

    I can't send or receive messages BBM or connect to the internet. Status of the service, I said "m not connected to the Internet Service or Enterprise Server. I am connected to my mobile provider and I seem to be the only one having this problem with my friends.

    I understand the problem. The problem came from a problem/mistake with my mobile operator and change/upgrade plan. If the problem is not related to the BB server.

  • WANT to 114 does not connect to the Web server

    Have installed a 114 WANT, everything works except for the webservices - wireless eprint etc.

    I tried everything-

    1 re-install services - error cannot connect to the web server

    2. Update - error cannot connect to the web server

    3 give the static IP address

    4 restore the default settings

    I have an internet connection on all computers.  Can someone give me a hint on how to get Web services to work?

    Hi sbenzie,

    How your printer is currently connected to the network? Via Ethernet or wireless? What is your current router / network configuration? That shows your printer because it is the IP address? What happens when you try to launch applications?

    Not yet given the information above, here's what I would try.

    I suggest to reconnect the printer to the network by running the Wireless Setup Wizard and attempt to restart the web services. If this is not enough, you may change some DNS settings in printers EWS (built-in web server) to do this, put the IP address in a browser window on your PC.

    This should start the integrated Web server. In SAP, select the network on the network tab, select 'network '.

    Then select "network address" (IP). Do not change the IP configuration at the top. Go down under "DNS address configuration"and select 'Manual DNS server'. " Under manual DNS server, enter (an 8 in each box on the first line) 8.8.8.8 and 8.8.4.4 on the second line. Press the button 'Apply' at the bottom.

    Now try to connect to Web Services again.

  • Cannot authorize Digital Editions - says could not connect to the activation server

    I use Adobe Digital Editions 4.5 on a Windows 7 computer.

    I was using Adobe Digital Edition to read library books, then decided to allow if I could access my library of books about elsewhere. I downloaded a few books, and then I started having authentication errors. I couldn't erase the authorization through Adobe Digital Editions to try to do it again, I kept getting errors. I followed the instructions to change the registry, which withdrew the authorisation of old, and I can now, select "authorize computer". But when I enter my Adobe ID and password, I get the error message:

    "Digital Editions cannot connect to the activation server. Please make sure that you are connected to the Internet. »

    My computer is connected to the Internet - that's how I am connected to this discussion. I've uninstalled and reinstalled the software, Adobe Digital Editions, and the same thing happens.  Any suggestions? I prefer Adobe Digital Editions alternatives, but if this activation problem can not be solved I won't have the choice.

    I read through other similar positions and found one that says what they uninstalled 4.5 and installed 3.0 instead. I did this and was able to authorize ADE (no internet connection problem) and again to download eBooks from our library.

  • could not connect to the smtp server

    Hi all

    I'm on a 21.5-inch iMac using OS 10.11.3 at the end of 2012. Yesterday (and today...) Mail would not send anything and gives me a status 'offline' for sending. I use Gmail IMAP with 2 accounts. The same problem happened to my wife on his computer with the shared e-mail account. My iPhone (4) will send the mail from the same account. If I log in to Gmail directly I can send emails. I deleted the account and re-written information. I quit Mail and restarted the computer. I looked at several solutions in the forums and have tried what appear to be common ones (that I could find), but nothing seems to work. After restart of the account Gmail sent me an email saying I had been blocked for using a "precarious" app, and I checked my Gmail settings so that I can use less secure (as the devil which means?) apps. The problem persists...

    Mail connection doctor says that it is connected to the internet and my 2 IMAP accounts work, but 2 SMTP accounts (I guess for the sending of?) say "not able to connect to this SMTP server.

    It all started yesterday without changing all the settings or preferences that I know.

    Any ideas?

    Michael

    Have you checked the SMTP settings for the latest recommendations googles? Changed something on their end recently?

    You run a 3rd party cleaning apps (clean my mac, mac guardian, etc.) or AN Anti Virus on your Mac? If so, remove them.

    have you installed anything between mail works and does not?

    If so, remove it.

  • Outlook does not connect to the mail server

    All of a sudden Outlook has stopped working and will not send or receive.  Error messages:

    Receiving ' reported an error (0 x 80042108): 'Outlook cannot connect to your mail server incoming (POP3). If you continue to receive this message, contact your server administrator or the ISP (ISP). »

    Also sending error 0 x 80042108

    Any suggestions?

    Hi miscojg,

    There are some possible causes of this error. Displays the article on http://support.microsoft.com/default.aspx/kb/813514 , and I suppose it might give some ideas on where to start looking.

    Kind regards

    Hans

  • Windows 7 Pro PPTP VPN 807 error and does not connect to the remote server, XP machine connect without problems

    I'm just set up my new windows 7 laptop (Dell Precision M4400) running windows 7 Professional and VPN are not working, they're always bombing with error 807.  "The connection between your computer and the VPN server was interrupted."

    I created a PPTP connection in order to connect to my workplace and connecting I continually receive an 807 error.

    To check my internet etc is work that I have connected to the same place through my existing XP laptop computer (DELL precision M4300) which has the same VPN settings.  Everything connects aok.

    I'm also running ESET as my anti-virus and firewall and that you have disabled it to test (normally I have no problem running this and is also running on my XP laptop).  I also confirmed that windows firewall is turned off.

    I connect wireless at home, internet works fine, firewall has not changed at each end (I manage both ends) and such noted works for my machine also running more XP wireless.

    Hello

    Welcome to Microsoft Windows 7 answers Forum!

    Note to resolve this problem, we have a support professionals who are well equipped with the knowledge on Windows 7 issues, do please visit the link provided below.

    http://social.technet.Microsoft.com/forums/en/w7itprovirt/threads

    Hope this information is useful.

    Thank you, and in what concerns:

    Suresh Kumar-Microsoft Support.

    Visit our http://social.answers.microsoft.com/Forums/en-US/answersfeedback/threads/ Microsoft answers feedback Forum and let us know what you think

  • The network card does not connect to the remote server

    My desktop computer has been recently updated to Windows 7 64 bit so I had to reinstall everything. Part of my job includes pulling data from two separate databases on a remote Oracle server. Previously with Windows 32 - bit Oracle SQL Developer worked after that I installed the Oracle Client and configured using Net Manager AMT settings. However now in SQL Developer, I get the following error message when you try to connect to databases using the same exact AMT settings.

    Error: "status: failed Test failed: the network adapter could not establish the connection.

    Versions:
    Windows 7 64 bit
    Oracle SQL Developer 3.2.2 (64-bit)
    Update to Java SE DK 6 43 (64-bit)
    Customer of Oracle 11 g R2 (64-bit)

    I've set up two databases under Naming Service in Oracle Net Manager. I used screenshots of my previous Net Manager settings to create the connections if everything is correct. Also, the two couplings to test successfully in the Net Manager. Contains the tnsnames.ora file

    PROD =
    (DESCRIPTION =
    (ADDRESS_LIST =
    (ADDRESS = (PROTOCOL = TCP) (HOST = thor)(PORT = 1526))
    )
    (CONNECT_DATA =
    (SERVICE_NAME = PROD)
    )
    )

    DWHOUSE =
    (DESCRIPTION =
    (ADDRESS_LIST =
    (ADDRESS = (PROTOCOL = TCP) (HOST = thor)(PORT = 1526))
    )
    (CONNECT_DATA =
    (SERVICE_NAME = DWHOUSE)
    )
    )


    In SQL Developer, I adapted the new connection settings exactly as before with a different screenshot of my connections to the previous developer. For example, I selected 'TNS' of the connection Type and selected "DWHOUSE" for network Alias. I even tried to put the chain of connection such as the login, but everything I've tried has made the mistake of connection.

    I followed some of the suggestions in other threads, but everything seemed to work, as I was able to connect to two databases using SQL more. Also, 'tnsping prod' both 'tnsping dwhouse' resulted in an OK. Same ODBC using the Oracle driver works to connect to these databases.

    I thought installing the JDK, Oracle Client, and SQL Developer as well as my screenshots would be an easy process and without hassle to connect to these databases. I'm doing something wrong? What else can I try?

    Of course, the point marking in your recent post concerns the former developer SQL install connection very well during execution by the G-drive.

    Although I'm not sure of the exact rules, I noticed that when the Oracle client resides on drive C, but the SQL Developer install is elsewhere, captures some files in its installation rather than from the Oracle SQL Developer client directory. An example is the ojdbc6.jar file. So you could also try installing SQL Developer 3.2 on another drive (internal or external non-disque C) and see if it works.

    -Gary

Maybe you are looking for