BlackBerry Smartphones Blackberry HS-700 wireless headset will dial a number only

I just got a new headset wireless for my blackberry curve. This is supposed to be new, in box. Now that it has set up and connected, when I command for dialing a call, he calls the same number... A number of area code 870 that I don't know. It doesn't matter what I say.

The number was not in my contacts. I looked online and it was in a place in Canada Alberta. I think the helmet that was sold to me as new had actually to be used before and it was a number of that whether he owned previously. I think that nobody has referred to the shop because it could not get other abbreviated numbers.

However, I continue to play with it and tried just by holding down button of the voice for a long time, until the light has stopped flashing. Then I read on the forum while holding the button a good two seconds before trying to make an appeal. Remove the connection, paired again, then hold the button long enough for my cell phone screen to say "call initiating. It now seems to work fine.

Sheesh.

Tags: BlackBerry Smartphones

Similar Questions

  • Smartphones blackBerry HS-655 + wireless headset and the "BOLD"

    I have the HS-655 + wireless headset and the "BOLD" and I want to know why I can't listen to music using my bluetooth?

    You need a STEREO BLUETOOTH for listening to music, with a simple bluetooth, you can not.

    Read this link

    http://www.BlackBerry.com/BTSC/search.do?cmd=displayKC&docType=kc&externalId=KB04009&sliceId=SAL_Pub...

  • Smartphones blackBerry HS-655 + wireless headset

    How much time does take to fully charge the HS-655 + wireless headset

    Hello

    I don't have the documents with mine, but mine seems to full charge in a few hours.

    Thank you

    Bifocals

    Don't forget to adjust your thread.

    Put the check mark in the green box containing your answer! Thank you

  • Smartphones blackBerry HS-700 Bluetooth headset

    Hi all

    Today I bought a HS-700 and the menu seems sometimes don't understand me and seems to think I'm saying in pairing mode, I was wondering a software update would help?

    It is possible that it might help, but I haven't seen any improvement, when I did the upgrade.

    you have an accent that is a bit heavy?

  • BlackBerry HS-700 10 headphones, how to order?

    Hello!

    I live in Switzerland, and I would like to know if there is a possibility to order a headset to BlackBerry.

    HS-250 seems to be available in France, but even so, I can't place the order.

    Is there a plan to buy a headset (HS-700 of preference) Blackberry in Switzerland?

    Thank you in advance.

    http://shop.CrackBerry.com/BlackBerry-HS-700-Bluetooth-headset/11A31A7587.htm

  • Question of Smartphones on how blackBerry torch performs the voice command dialing

    The torch requires a data connection to the internet to dial by voice command?  My Pearl dial any number in my repertoire by voice command.  It requires no "training".

    I checked on Android - based phones - they all connect to the Internet to perform voice dialing - therefore, require a data plan.

    I like the touch screen of the torch, but it want voice dialing by recognizing my directory names without having to access the Internet.   None of the vendors selling BlackBerry can answer that.

    No, you don't need an internet connection to use voice dialing on a BlackBerry phone.  You talk, he listens to, end of story.

    It's how good BlackBerry are devices.

  • can I listen to music on the watch with a wireless headset while I swim laps?

    can I listen to music on the watch with a wireless headset while I swim laps?

    Short answer, Yes, but you will water proof wireless headsets. Not for the first watch of Gen.

  • Toshiba TV/DVD combo 32SLV411U - listening to the wireless headset?

    I hope I am posting this in the right place. I couldn't find a specific board just for TVs?

    I recently bought a Toshiba TV/DVD combo 32SLV411U. I really like but have a problem.
    The best way to go about that I guess is to tell you what I hope to be able to do.

    I will say first of all, I called Toshiba tech support and they said it couldn't be done and advised that I buy a sound bar.
    I'm not 100% convinced they have well understood or that a sound bar would solve the problem.

    The tv model I does not appear to have a separate headphone jack. I was obviously the rear connections for rca type cables.

    While watching a DVD (not connected decoder, in DVD mode) I want to be able to have the silent TV.
    I live in an apartment complex and do not want to disturb the neighbors. I want the audio from the forthcoming DVD the only wireless headset. This does not work when the TV is connected to cable as the sound comes through the cable box.

    It seems to me that I should just be able to fix the audio cable rca to the back of the TV and listen as I've described above. But I can't make it work any configuration, I tried. I don't know if I just need to configure things differently or what. When I go to the menu and look at the options, it doesn't give me a lot of choices in this area, unless I'm looking in the wrong place.

    Is this possible without buy me something more? If so, how we configure it to do it properly when you watch a DVD?

    If I do not need to buy anything, how a Soundbar works and it would solve the problem?
    Or should I look for a standalone DVD player with audio connections on the back (a little beats the purpose of)
    have a TV/DVD combo, but could be a less expensive option.

    I guess I should have taken a second look at the features before you buy the combo TV. I just assumed that, with the connections audio to the rear, it would work. I had no problem with the previous TV/DVD combo I've owned, but it doesn't have a headphone port. In the meantime, I watch DVDs on my PC.

    Any information or advice is really appreciated. Thanks in advance.

    > I hope I am posting this in the right place. I couldn't find a specific board just for TVs?
    You can't find a good advice, because it is a user to user Toshiba forum computer systems.

    But maybe I can help you:
    > Watching a DVD (not connected decoder, in DVD mode) I want to be able to have the silent TV.

    I live in an apartment complex and do not want to disturb the neighbors. I want the audio from the forthcoming DVD the only wireless headset. This does not work when the TV is connected to cable as the sound comes through the cable box.

    In my case, I connected my stereo directly on the DVD player using RCA (red/white cinch) cables.
    In addition, the DVD player is connected to the TV via HDMI.

    I can turn off the sound on the TV and can listen to the sound from the stereo speakers.
    If you want to use headphones, then connect it to the stereo and it should help you :)

  • Bluedio wireless wireless headset does not

    Bluedio headphone wireless not working is not wireless. I hate the son as being disabled, I have seem inclined to get al tangled son. CABLE

    I have followed all the steps, install the driver, pair it with laptop, headphones to the computer using the port on the laptop.

    So more how do I do?

    Hello

    I would like to know some information about the problem so that we can help you better.

    1. What is the brand and model of your laptop?
    2. What is the model number of Bluedio wireless headset?

    Thank you for details on the issue.

    I also know that the inconvenience that you are experiencing due to wireless headset problem. I will definitely help you.

    This problem may occur because of corrupted device drivers or incorrect device settings.

    I would suggest trying the following methods and check if it helps.

    Method 1:
    Run this Microsoft fixit and check.
    Reference:
    http://aka.Ms/diag_device

    If this does not help, use method 2.

    Method 2:
    Use the steps described in this article and check the issue.
    Reference:
    Bluetooth devices do not work correctly on a computer that is running Windows 7
    https://support.Microsoft.com/en-us/KB/980396

    I hope this information helps.

    Please let us know if you need more help.

    Thank you

  • Logitech Wireless Headset H800 does not

    Original title: Logitech Wireless Headset H800

    I have all the signals on the helmet (light Amber to connect to the computer and the green light for light), but not yet by train

    all the sounds. I have configured and says working properly. When I do a search in the computer (Windows 7) is not displayed. In the playback area

    It shows Logitech wireless by default. Have you tried another USB port, stll same problem

    Hello

    Thanks for posting your query in Microsoft Community and we give the opportunity to help you.

    You can follow these steps and check if it works:

    a. click Start and select Control Panel-> his-> in the tab 'read' select 'Properties' for your device. (helmet)

    b. then you will be on a tab "properties of speaker.  Select 'levels this option will allow you to change the balance.

    You can also see the following articles for more information:

    Adjust the sound level on your computer

    http://Windows.Microsoft.com/en-us/Windows7/adjust-the-sound-level-on-your-computer

     

    No sound in Windows

    http://Windows.Microsoft.com/en-us/Windows/no-sound-help#no-sound=Windows-7&V1H=win8tab1&V2H=win7tab1&V3H=winvistatab1&v4h=winxptab1

    Hope this information helps. For any other corresponding Windows help, do not hesitate to contact us and we will be happy to help you.

  • Re: Satellite L450D - 13 X - is it normal that the wireless light will be red?

    I recently bought a Satellite L450D - 13 X laptop and have just noticed that the led of the wireless system is red.
    I have a 100% a good range wireless connectivity using my BT home hub v2a.
    Is it normal that the wireless light will be red, or should it be green like the others?

    Van
    Delete.

    Hello

    Seeing the Wlan can be ON or OFF. It does not change the color!
    WLAN LED tells you the State of WLan.
    If the light is red while this means that WLan is ON.
    If the light is OFF then the WiFi network is disabled.

    Welcome them

  • Bluetooth headset will work for Motorola Cliq 200 MB?

    Hello

    Bluetooh Headset will work for Motorola Cliq 200 MB? I plan to buy a headset Motorola S10 - HD Bluetooth stereo to connect to my Motorola Cliq MB 200... I don't know if it will work or not... Can someone please confirm this for me, so that I can go ahead and buy this one?

    Thanks and greetings

    Srini

    OK, I'm just home from work. I found that the cliq is compatible with

    The S9 and S10 as shown here http://www.motorola.pairxusacom /? l = 28 & a = 0 & pp = 910 & sm = 61 & sp = 1135 & j = 68551 & jd = 1320761931000 & w = 13fzse

  • JWNR2010v5 (N300 wireless router) will support 100 Mbps connection speed internet in LAN?

    I intend to upgrate my internet connection speed of 60Mbps to 100 Mbps, but my provider says JWNR2010v5 (N300 wireless router) will not support 100 Mbps internet connection speed in LAN. Is this true? that which is the maximum speed of JWNR2010v5 for the LAN support. I don't mind the wireless speed, I use the maximum LAN. Thank you in advance.

    Your provider is correct. Either move your router to a router which supports! 000Mbps (MGI) LAN and WAN ports or stay at your current speed Interent.

    http://www.downloads.NETGEAR.com/files/GDC/datasheet/en/JWNR2010v5.PDF

  • Apple wireless keyboard will not connect to mac mini

    Apple aluminum wireless keyboard will not connect to mac mini. He worked the other day and when you press the power button gives me a green light for a few seconds. I removed from my bluetooth devices and removed the batteries which did nothing. It will not go into the mode of discovery, but he recognizes the keyboard and fails to connect.

    So much for some reason any it plugged into my macbook of brothers.

  • SK2061: The wireless keyboard will not connect when the PC is turned on.

    My problem is, when I start the PC, (HPK-15 500, 319NA), wireless (SK2061) keyboard, does not connect. I have to shut down the PC so he can connect (no restart, you must stop it).  Have had the PC for 5 months and it has been published. Not changed the battery makes no difference.

    The internet statement States I shoud push the blue button until the USB receiver flashes. This PC does not have an external USB receiver, I guess it's built in! The mouse works OK.

    Hello @JimCar82,

    I read your post on how the wireless keyboard will not connect when the computer is turned on, and I'd be happy to help you in this case!

    Re-connect your keyboard to your desktop computer wireless, I advise you to follow the steps described in this document on the keyboard and wireless mouse troubleshooting. The USB receiver should be found at the back of the tower.

    Please re-post with the results of your troubleshooting, and I look forward to your response!

    Concerning

Maybe you are looking for

  • How to use write to VI of the worksheet

    Hello I want to record the incomming data collected from my experience in a worksheet that can be opened in Excel.  I used the worksheet vi entry but when I run the program file is not generated.  I enter the path to the file and run the program. Whe

  • Problem in NavigationPane

    Hi, I use NavigationPane to open the page in the file of main.qml its market well. Now when I add the NavigationPane in another document qml his does not work... As I created main.qml and in annex 5 actions: Actions: Action Action B Action C Action D

  • XMP how to remove associated file?

    Hi there and I hope someone can help me with this. Adobe Photoshop CS6, XMP files should not be involved (you should get the message to choose or web search program etc.). I associated the XMP with Adobe Photoshop CS6 by mistake. I want to delete thi

  • Frequent DRIVER_POWER_STATE_FAILURE BSOD in mode 'sleep'?

    Since a few days now when I close the lid on my laptop and put it to sleep, he's not waking up. I have to restart manually each time and Windows saves as a BSOD. Using BlueScreenView, I was able to find out that the error was caused by ntoskrnl.exe.

  • cannot open an EM 5 Olympus raw format in CS2

    What raw update should I use for the opening gross fotos (made by Olympus OM EM 5) in 2 Tablespoons?Your Burkhard