BlackBerry smartphones default switch of the camera built-in memory card media

My blackberry 8330 has switched to the built in default memory for my photos.  I have a media card that has been there since the phone was new. About 3 times before, the phone reset and it takes me forever to find the place in the settings to set the default value to the press card.  This time, I can't find the screen to do it.   Can someone walk me through the steps to get there?  Thank you

Hi and welcome to the doug15 forums!

A few places to visit: Blackberry 101     tips & tricks

Sure.  No problem.  Open the camera, options, key of BB, do scroll down to Pictues store: on Media Card, save.

Let us know how it goes.

Happy to welcome you!

Tags: BlackBerry Smartphones

Similar Questions

  • BlackBerry Smartphones need help on the decision on a memory card!

    I know that my 8330 can take up to 8 GB, depending on my box and what verizon told me I'm looking to upgrade to the largest I can. I found that there are 2 versions of different micro SD now and the newest one is not backward compatible for all which is using the regular SD micro cannot use it. It's called, Micro SD SDHC, which I think is a version of high cappacity of the old micro SD. What I want to know is, can I use this card Micro SD SDHC on my Blackberry 8330 because they say it is not backward compatible with or is the 8330 able to run?

    Thank you

    Anything bigger than 2 GB MicroSDHC.  Simply, it is synonymous with great ability.  You can use the Micro SDHC card.

  • BlackBerry smartphones can compensate for the cache on a memory card?

    Hello world

    I recently acquired a storm (9350).  I get very familiar with this camera and enjoy its capabilities.  After reading a lot of messages and advice given here, I learned a lot more that I thank you all for.

    My as stated above question the limited cache and internal memory (device).  Specifically, is there a setting or a way in which I can have use of the storm the SD card installed to store the cache and temporary files?  I ran into the problem of running out of memory flash and have the "garbage collection" to take my storm when you try to use it.  (Here), I learned how to clean the cache and restore/free space files.  How can I do a more permanent solution?

    Thank you in advance.

    Kind regards

    tecknot

    Nope... This is a physical limitation in the device. For making even the attempt would completely void the warranty... and I doubt you can find adequate patterns to tell you how to do it.

  • Tips on how to get attached with Nikon D810 and Lightroom - I tried with the uSB cable but Lightroom does not recognize the camera. My memory card has no images on it that I read somewhere that it can slow things down if it has pictures on i

    I tried to use the uSB cable, but Lightroom does not recognize the camera. My memory card has no images on it that I read somewhere that it can slow things down if she has no images on it

    If you use Lightroom CC / 6 on a Mac OSX El Capitan you must update to the latest version of CC 2015.4 / 6.4. Problems with Nikon capture home has been fixed in the latest update, the lis below.

    Lightroom Journal | Tips and advice straight from the Lightroom team.

  • BlackBerry Smartphones could not start the camera

    When you try to start the camera, I get this message... Could not start the camera.  Close other applications and try opening the camera again.

    I have nothing else other running the phone itself is waiting for a call.  I can't find anything on the Blackberry support for the same problem unless I'm missing it.

    When I got on the phone a few months previously, it worked fine and I could send pictures, now he's stuck.

    Thanks for any help.

    CB

    Hello

    It's worth a try:

    Go to the OPTIONS - ADVANCED OPTIONS - HOST ROUTING TABLE click here to enter, then the menu button to register now.

    You will receive an email for verification.

    Remove the battery while the device is activated, replace after one minute,

    Let the device reboot 1-3 minutes, try again the camera. Please let me know! Thank you

  • BlackBerry Smartphones from switching to the network of the company for streaming?

    I want the box under Options tiked
    "switching to the enterprise network for broadcast?

    Yes, you want to tiked this box, it's under Options in browser B of B.

  • Touch of convenience for the right of blackBerry Smartphones is set to the camera, but when happens nothing hurry

    Good practice key is set to the camera, but when pressed nothing happens. I have the ATT model.

    It was a defective phone, is it possible to delete this message?

  • BlackBerry Smartphones after switch of the device to the same model, BB missing Apps (like cards and password keeper)

    I had problems for a long time with my keyboard on my BB Bold 9900, so finally I was given a used to toggle Bold 9900. I have used the functionality of the switch device of BlackBerry Desktop (v7.1) software and was off and running on my 'new' "BOLD". Finally, I noticed that the cards and password keeper are missing on my new phone. I did a lot of digging through our corporate HelpDesk, phone call from mobile provider support, and if Google search (incl. various BlackBerry support forums). Nowhere is that I found a solution that worked.

    A number of sources did the download card www.blackberry.com/ but that results in a message of "Opinion sorry, your device does not meet the system requirements that are needed to support BlackBerry Maps."

    When I look in the Applications tab of BB Desktop Software, BlackBerry Maps is not listed (is not password keeper).

    Two of my phones are running OS 7.1 Bundle 2840. Carrier SaskTel (part of the network of Bell Mobility).

    Any ideas?

    From what you describe, something is not right when you installed/updated / switched devices. Thus, a clean reload of the OS would be the right thing to do. The easiest way is, on a PC (you can not do on MAC):

    (1) make sure that you have a current backup and your BB complete... you can find the instructions at the link in my auto-sig below.

    2) uninstall all the BB OS packages from your PC,

    (3) make sure you have the BB Desktop Software already installed

    (4) download and install on your computer, the BB OS package you want:

    • http://us.BlackBerry.com/support/downloads/download_sites.jsp
    • If all you want are the levels of BONE, it is first sorted by carrier - the carrier supports, your search will be fast. However, some carriers are much slower than others to release updates. To really get the package up-to-date OS for your BB, you need to dig through and find all businesses that support your specific model BB and then compare the BONE levels they support.

    5) remove all copies of the SELLER on your PC. XML... There will be at least one and maybe 2, and they will be located in the same way or to (it changes based on your version of Windows) these files:

    • C:\Program Files (x 86) \Common Files\Research In Motion\AppLoader
    • C:\Users\(your Windows username) \AppData\Roaming\Research In Motion\BlackBerry\Loader XML

    6 (a) to change your level of BB OS installed (at level or lower), you can run the Desktop software and connect your BB... the software should offer the operating system package you have installed on your PC.

    6 (b) or, for recharging your BB OS level installed as well to change, work around the Desktop software and use the CHARGER. EXE directly, through step 2 in this process:

    If, during the process of 6a or 6 b, your BB has an error '507', simply unplug the USB of the BB cord and reinsert it. do nothing else... This should allow the installation to continue.

    If you are on a MAC, you are limited to only your sanctioned carriers OS packages... but can still use any level they currently have to sanction. See this procedure:

    • KB19915 How to perform a clean reload of the smartphone BlackBerry using BlackBerry Desktop Software application software

    Good luck and let us know!

  • BlackBerry Smartphones without attachment in the transmission of emails

    When sending emails with attachments, attachments do not go through.

    No idea why?

    Hello and welcome to the community!

    Here's a knockout who deals with this error:

    • KB10509 E-mail messages with attachments sent from the BlackBerry smartphone are received without the attachment

    I hope that it contains something useful! There are also several existing threads on this site, which discuss exact error... your opinion of those who may prove useful, and a search of this website, by using the error message, error code or symptom, should reveal all the existing threads that are applicable to you.

    Good luck and let us know!

  • BlackBerry Smartphones Google sync on the blink?

    Hello

    I just deleted google sync app to my BB and took the advice of RIM here to allow syncing of my BB calendar with my google calendar - http://btsc.webapps.blackberry.com/btsc/viewdocument.do?noCount=true&externalId=KB24204&sliceId=2&cm...

    However, despite advice it is certainly not true that "contributions sent the BlackBerry smartphone are synchronized with the calendar based on the web in a few seconds." I saw an entry on gmail after 10 minutes and I'm still waiting for the others.

    Is there a known issue with this? I have no problem with the network at all.

    Thank you

    Luke

    If please try reebooting your phone and connect to your google calender after 5 minutes.

  • Mac Mavericks. Camera raw 9.1. Camera Nikon D810. How to set the default settings of the camera profile standard (now available after downloading the camera profile and copy it into the appropriate file)? Is it possible to apply also in the pictures showe

    Oops... did not write the question where I... How to set the default settings of the camera profile standard (now available after downloading the camera profile and copy it into the appropriate file)? Is it possible to apply too in images showed in the bridge? I'm a newbie in the forums and I'm not sure how to proceed.

    You can right click and copy the settings on an image that has the right profile. Then highlight all the images that you want to edit, right click and paste the settings. On the list that is displayed, simply choose the camera calibration.

  • Import photos to fix or mixture doesn't seem to work in the film. The photos are raw shot with nik0n d800 imported into the camera from an sd card

    Import photos to fix or mixture doesn't seem to work in the film. The photos are raw shot with nik0n d800 imported into the camera from an sd card

    Hello!

    Mix and Fix do not support the raw file format. Please try to download as a. JPEG. However, the support of raw files is an excellent idea for a future feature! If you do not want to share this idea with the team, press the icon of the product in the upper left of the application, and then click "give us your comments. I would like to know if I can help with anything else!

    See you soon

    -Kathleen

  • Built-in memory card reader does not

    Hi all
    I use an Acer aspire one 533 with windows xp sp2. My has netbook with a built-in memory card reader that does not detect my memory cards (SD cards).
    FYI, the laptop has recently been recreated!
    Please help me! I am in critical need of it as most of the work on readers of SD.

    It is very possible that you need a driver.  The first place to look is the Acer site.  I couldn't find your model (533) in the list but I found a 5330 model at the following link which includes drivers for the card reader:
       <>http://support.Acer.com/us/en/product/default.aspx?tab=1&modelId=52 >
    Start your search here:
       <>http://support.Acer.com/us/en/default.aspx >

    If this does not help, do the Device Manager:
    Start-> Run-> "devmgmt.msc".
    Find your card reader in the list, double-click it to obtain information on the manufacturer and model, and then search for a driver from the manufacturer's website.

    HTH,
    JW

  • I am running Vista Home Premium 32 bit and cannot read the SDHC 4 GB memory card

    I am running Vista Home Premium 32 bit and cannot read the SDHC 4 GB memory card, it worked in Fujitsu siemens but not now. Can anyone help in laymans terms not techno type talk how I can fix it.

    I'm a model so need to step by step instructions: o))

    Hello

    1 have had any changes made on the computer before the show?

    2. do you get an error message? If Yes, what is the full and exact error message?

    Method 1:

    I suggest to test the card by inserting it in a different USB port and later in another computer to test and check if it is detected.

    Method 2:

    I also suggest you to check if the memory card is detected by a different card reader.

    Method 3:

    I suggest you to see link and check if it helps:

    Tips for solving problems of USB devices

    http://Windows.Microsoft.com/en-us/Windows-Vista/tips-for-solving-problems-with-USB-devices

  • Menu to transfer the photos on my memory card does not appear, is there another way I can do?... Without using the usb cord...

    Menu to transfer the photos on my memory card does not appear, is there another way I can do?... Without using the usb cord... He lost. :/

    The following steps may be worth a try:

    Insert your memory card into your Media Player...

    Reach... Start / computer...

    What is the memory card show as a drive letter? (if your Media Player)
    has several slots, there will be several "hard drives" listed... the
    SD card will be one of them)

    If_Yes_right click on the drive letter correct and in the menu... Choose...
    Open... now you should see the directory of the memory card or to explore.

    From there you should be able to drag and drop or copy and paste the
    files in a folder on your hard drive.

    Also... the following items may be worth a visit:

    Windows Vista-
    Troubleshoot AutoPlay
    http://Windows.Microsoft.com/en-us/Windows-Vista/Troubleshoot-AutoPlay-problems

    Windows Vista-
    How to change the auto run settings
    http://Windows.Microsoft.com/en-us/Windows-Vista/Change-AutoPlay-settings

    Windows Vista-
    AutoPlay: Frequently asked questions
    http://Windows.Microsoft.com/en-us/Windows-Vista/AutoPlay-frequently-asked-questions

Maybe you are looking for

  • Authorized the pop ups are not allowed

    I play games on Pogo, and several weeks after an updated FireFox browser, pop-up exceptions listed for Pogo has stopped working. I have a solution, but found no support or solve my problem. I completely turned off the blocker and the pop - ups game P

  • Matte, non-reflecting screen on Satellite Pro A120

    Hi, I'm about to buyToshiba Satellite Pro A120 Core Duo 1.66 GHz 512MB 40GB COMBO XPquicklinx: 454PPNManufacturer part: PSAC1E-03X00YEN But have a question. This laptop has display Crystal Bright/True Brite etc.?I prefer laptops with screens "masts",

  • Want 7645: Changing the default settings on HP 7520

    For reasons that I don't understand, after a long telephone help, user HP Support told me install the HP Photosmart 7520 driver for my printer HP Envy 7645.  It works fine EXCEPT that whenever I want to use to print several pages I have to change the

  • repair of an xp pro sp3 on xp says invalid product key

    install its gets to the key to produce and enter a valid key number and it says its invalid do I don't knowhas had to replace the motherboard with a

  • Restore file rasphone and hiddenPbk in the right place

    I can't find the PBK folder. I could reach up to Microsoft in App data, but could not trace Network\connections\pbkfolder. Please help me with this