BlackBerry Smartphones still does not display the complete emails! UGH!

Similar Questions

• BlackBerry Smartphones Z10 does not load the apk files

  Hello

  I bought a brand new phone BalckBerry Z10/STL100-3 (OS 10.3.2.2154) a week ago. But from the beginning I was not able to run any apk file. Preinstalled same amazon store or amazon did not work (green bar chimneys around 80%)! I tried just about everything suggested in this forum, but it still does not work. Yesterday, I updated my phone (OS 10.3.2.2836) cannot be loaded using Sechesi, always the apk files (green bar fireplace 80%).

  Any ideas how to solve this problem?

  Thank you

  OK, I decided to make security and the problem disappeared... it's very cool that you do a security wipe on all new device to make it work!

• Windows Explorer (Vista) does not display the complete list of Favorites

  In the current w / last week, my IE (9) does not open a Favorites folder.

  
  (It is large enough - maybe entered 800 (I can't check. beak of this problem).)
  Then I noticed that Windows Explorer will never complete if I asked him to show the contents of this folder.
  (It shows a lot, but then never finished.)
  Worse, even if I peut stop it, if I try to go to another folder, it tries to display the original folder again.
  Worse, if I kill this window, the explorer.exe process continues to face of ~ 100% of my (two processor!) CENTRAL PROCESSING UNIT.
  
  Kill this process is not (even later) to get me a new Windows Explorer, & so I have to shut down or restart.
  Malwarebytes Pro says that my system is clean.
  .. .as is dskchk (sp?)
  I tried to isolate the problem by doing a binary search:
  • Find ~1/2 files in the offending file.
  • Move them to a new folder.
  • See if there is still an offending folder.

  .. but it took forever, because I keep falling on this problem that I try to do this last step.
  I'm running out of ideas!

  Hello

  Follow the following troubleshooting methods:

  Method: 1

  Start the computer in safe mode with network and then try to open the Favorites folder.

  Startup options (including safe mode)

  Method: 2

  Configure the computer to clean boot and check how it works.

  To configure the computer clean boot, follow the steps in the below link:

  How to perform a clean boot

  After you clean boot troubleshooting, follow step: 7 article to reset the computer in normal mode.

  Method: 3

  also, I would sugest to open internet explore mode no. Add-on and check how it works.

  Open internet explore mode no. Add-on

  a. click the Start button

  b. click on all programs

  c. click on accessories

  d. click on system tools

  e. then click Internet Explorer (No Add-ons)

  If disabling all add-ons solves the problem, you can disable all add-ons and then put modules only as needed.

• BlackBerry Smartphones Can does not change the signature block on my internet mail from my Pearl

  The signature block on my email says "Sent from my Verizon Wireless Blackberry".  I would like to add my name and email address, but the text is not editable on the Pearl.  Does anyone know how to change this?

  Verizon Wireless Customer Service has been able to explain the problem and solve it.  For those interested here it is:

  BlackBerry Internet Service provides functionality to auto-connect to new users that does not require a user name and password.

  The user must click the settings icon to email on the BB and then click on the link create username.

  Once the username is created, you can go to www.blackberry.com/go/vzw and change the signature options.

• Is BlackBerry Smartphones gps does not follow the map

  Guys good day. Help, please.

  My problem is with the GPS. When I put in the address and ask to 'navigate here.

  I can see the arrow moves but the card is not mopve as well so I have to constantly move the map manually.

  It was only after I updated from version 5 to version 6.

  Thanks for the comments.

  Edin

  Sorry, I can't help, but I can sympathize with you because I was looking for a solution to this as well.  I just bought this new Bold 9650 y / day, in lieu of my Pearl 8230, that somehow the GPS got fried, stop working, whatever, with a sort of update that was pushed to the phone.  Weird situation, look in the area of Pearl for more details if you're curious.

  Anyway, it used to work perfectly on the Pearl - point fixed GPS and card installs under him.  Seems I got on a bad deal here because my OS is the new 6.  I hope that someone will know about a fix for this.  A bit useless if you have to scroll to get to your location all the time, as it is constantly going off the screen!  :-(

• DBCA does not display the complete list of RAC nodes

  Hello
  
  While the use of dbca to create a database of cars on two nodes of a cluster to 4 knots, the dbca Wizard lists only 3 nodes to choose. His watch is not the 4th node srv1053 which is also in the same cluster as the other 3. Our Crs is 10204 and db home where I create 10204.
  
  An excerpt from the journal of the dbca:
  
  [AWT-EventQueue-0] [5:5:19:540] [GetActiveNodes.create:221] return an existing instance of GetActiveNodes
  [AWT-EventQueue-0] [5:5:19:540] [Cluster.verifyNodeList:954] clusterNodes [0] = srv1052
  [AWT-EventQueue-0] [5:5:19:541] [Cluster.verifyNodeList:954] clusterNodes [1] = srv1053
  [AWT-EventQueue-0] [5:5:19:541] [Cluster.verifyNodeList:954] clusterNodes [2] = srv1050
  [AWT-EventQueue-0] [5:5:19:541] [Cluster.verifyNodeList:954] clusterNodes [3] = srv1051
  [AWT-EventQueue-0] NodeList [5:5:19:541] [Cluster.verifyNodeList:959] [0] = srv1050
  [AWT-EventQueue-0] NodeList [5:5:19:542] [Cluster.verifyNodeList:959] [1] = srv1051
  [AWT-EventQueue-0] NodeList [5:5:19:542] [Cluster.verifyNodeList:959] [2] = srv1052
  
  I compared the file/etc/hosts and the o/p of the olsnodes - n-i Pei command and it is the same for all 4 nodes. The file /etc/ocfs2/cluster.conf is also the same for all 4 nodes. I guess I'm missing something stupid, but impossible to pin.
  
  Thank you
  M
  
  Published by: Mmubeen on October 26, 2009 07:37

  What about using. / runInstaller - updateNodeList to fix your inventory?

  http://download.Oracle.com/docs/CD/B19306_01/EM.102/b16227/oui3_manage_oracle_homes.htm#CJADBAHJ

  Good luck!

• BlackBerry Tour 9630 smartphones does not display the name of the caller

  Hello

  I have a Tour 9630, version sw 5.0.0.732.  When the phone rings, it does not display the name of the caller, their telephone number, although this number is in my address book.  Once I answer the call, the name will be displayed.

  Naturally, I would like to know who is the caller before I answer!  :-)

  I found a few messages, ask something similar, although for different model phones.  Some of them suggest that I have to disable protection for the content... but I can't find it in the options.  Even in the User Guide, it contains instructions (go to Options > Security Options > General settings... but there is no "General settings" on my phone.)

  If anyone knows how to solve this problem, I would be very grateful!

  Kind regards

  Options > Security > encryption > include contacts.

  There could be other solutions... Try these:

  1. make sure that you set your own country code to the Phone Dialer screen > Options > smart dialing.
  Set your country code in this format: "+ xx" where xx = country code. Some countries have two or three-digit country Codes. Do not place not the '+' in the entrance of your contact.
  * In the United States, the value of this country as '+ 1' Code and place your local area code in the appropriate box (this normally the default setting in a new BB).

  2. in the same place, change the length of National number for the number of digits corresponding to your country (since some countries have less than 10 as that set by default in the BB). Check out the total numbers, less country code. Do not place not the '+' in the entrance of your contact.
  * For example, some countries have a total number to 8 (more than 3 for the country code). You must enter '8 '.

• Z10 Z10 ILA BlackBerry does not display the name of the caller of the stored contacts.

  My Z10 does not display the names of the callers stored in contacts with a prefix or area code. For example, an incoming call on contact JOHN SMITH, whose number is stored as + 44 7976 667668 shows not her name but just 07976 667668, but if the number of JOHN SMITH has been stored as 07976 667668 (without + 44) then the incoming call appears her name. Does anyone know how to remedy this? or is it a design error / omission by RIM?

  This is a known issue with the software currently.  Please visit KB33685

• My Firefox has just automatically updated itself to the version 42. The extention under modules page does not display the extensions I have installed.

  My Firefox has just automatically updated itself to the version 42. The extention under modules page does not display the extensions I have installed. The plug in page shows the plug ins I installed. How can I fix it? This happened on my 64 bit Windows 7 partition. I installed the extension "classic add-on" to see if she could solve the problem. There is unfortunately no. I have a screenshot. I'm not sure if I have permission to upload it to the media gallery. I also use Linux, but I did not upgrade that are still there.

  It is possible that there is a problem with the files that store the registry extensions.

  Delete the files (extensions.json, extensions.sqlite, extensions.ini) extensions.* and compatibility.ini in the profile folder of Firefox to reset the extensions registry.

  • https://support.Mozilla.org/KB/profiles

  New files will be created if necessary.

  See "extension corrupted files:

  • http://KB.mozillazine.org/Unable_to_install_themes_or_extensions
  • https://support.Mozilla.org/KB/unable+to+install+add-ons

• Windows does not display the CD-ROM drive

  A week ago, my computer stopped showing me an icon for my DVD player. When I go into the Device Manager there is no option for CD/DVD players. I tried Microsoft Fix It, and he told me that there is no CD drive. I can not re - install a driver because the Device Manager does not display the CD players.

  I did not major changes to my computer I know so I can't imagine what the problem is. Help?

  Trevor

  Hello

  Follow these steps to remove corruption and missing/damaged file system repair or replacement.

  Start - type in the search box - find command top - RIGHT CLICK – RUN AS ADMIN

  sfc/scannow

  How to analyze the log file entries that the Microsoft Windows Resource Checker (SFC.exe) program
  generates in Windows Vista cbs.log
  http://support.Microsoft.com/kb/928228

  Then, run checkdisk - schedule it to run at next boot, then apply OK your way out, then restart.

  How to run the check disk at startup in Vista
  http://www.Vistax64.com/tutorials/67612-check-disk-Chkdsk.html

  ==========================================================

  After the foregoing:

  Step 1: Please do all the same underneath if you did some before as is often total
  a process that solves the problem.

  Try this - Panel - Device Manager - CD/DVD - double click on the device - driver tab.
  Click on update drivers (this will probably do nothing) - RIGHT click ON the drive - uninstall.
  RESTART this will refresh the default driver stack. Even if the reader does not appear to continue
  below.
  
  Then, work your way through these - don't forget the drive might be bad, could be a coward
  cable or slight corrosion on the contacts (usually for a laptop) and other issues.

  Your CD or DVD drive is missing or is not recognized by Windows or other programs
  http://support.microsoft.com/kb/314060 - a Mr Fixit

  Try this fix manually if the Fixit 314060 does not work
  http://www.pchell.com/hardware/cd_drive_error_code_39.shtml

  Your CD or DVD drive is missing or is not recognized by Windows or other programs-
  a Mr Fixit
  http://support.Microsoft.com/kb/982116

  The CD drive or the DVD drive does not work as expected on a computer that you upgraded to
  for Windows Vista
  http://support.Microsoft.com/kb/929461

  When you insert a CD or a DVD, Windows Vista may not recognize the disc
  http://support.Microsoft.com/kb/939052

  Your CD or DVD drive cannot read or write media - A Mr Fixit
  http://support.Microsoft.com/GP/cd_dvd_drive_problems

  CD/DVD drive does not appear in Windows Vista, or you receive this error in Windows
  Vista installation after booting from the DVD (AHCI)
  http://support.Microsoft.com/kb/952951
  Drive CD - R or CD - RW Drive is not recognized as a recordable device
  http://support.Microsoft.com/kb/316529/

  Hardware devices not detected or not working - A Mr Fixit
  http://support.Microsoft.com/GP/hardware_device_problems

  Another possibility is that the cables are loose. Remove ALL power, then make sure that the cables in both
  ends. Remove and replace, do not just tight. For laptops, you can often clean power and
  contacts data with a pencil eraser.

  Some DVD players do not use the Windows default drivers so check with the manufacturer of system and
  manufacturer of device to see if there is a firmware or drivers for your drive if necessary.

  ===============================

  Step 2: You have disc problems as the CD/DVD is actually 4 discs in 1 case (CD & DVD
  Burn and CD and DVD read). So it is not unusual for 1 or 2 operational so that other parts
  do it right.

  Did you follow the Troubleshooting Guide for the reader who still does not work? There are
  the entries in registry that the troubleshooter does not solve and those who "might" be the cause.

  Check with your Maker system and a device for the two possible firmware updates and
  the correct registry entries for your car.

  Here are the keys that I of course are those in question - for the subkeys of the CD/DVD drive
  as there will be other subkeys in these keys. Do not forget to ask specific keys involved as well as
  the parameters.

  HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Enum\IDE

  HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Hardware Profiles\0001\System\CurrentControlSet\Enum\IDE

  HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\Class\ {4D36E965-E325-11CE-BFC1-08002BE10318}

  -----------------------------------------------------------------------

  You can probably find more info here and maybe even the exact registry for your CD/DVD settings
  drive from someone with the same model.

  Forums - a lot of expert real help
  http://Club.myce.com/

  CD/DVD units
  http://www.myce.com/storage/

  I hope this helps.

  Rob Brown - MS MVP - Windows Desktop Experience: Bike - Mark Twain said it right.

• MapView does not display the map

  MapView tutorial sample apps does not display the map on my device.

  I tried to get out by creating a sample application with lat coded hard and longi, still nothing.

  In addition, the native application "maps" on the device also fails to show on the map. !

  What I m misssing?

  That you get an event message when you try to drag and zoom control.
  Set the width and height to infinity to try.

• BlackBerry Smartphones computer does not detect Blackberry

  After you have connected to the computer via USB, there is no evidence in my computer that the Blackberry is not connected even if Mass storage mode is turned on. My computer does not display the device or media card. Desktop manager detects but Media Sync does not work.

  Here, try this. I had the same problem and it worked for me. Got this from another site:

  Mass storage solution... Finally working...

• Woodtype ornaments OTF does not display the oval to symbols, only black

  I tried all the options installation - Mac OS 10.6. Does not display the symbols FontBook or InDesign... just black ovals.

  I downloaded again Adobe... didn't work.

  I want to ask Adobe to watch the download but there is no available direct contact.

  OpenType fonts are not mapped to ASCII characters as the old Type 1 fonts are. In the case of a typeface as WoodType ornaments, the symbolic characters do not map to your keyboard. You must use the glyphs Palette in InDesign to enter characters.

  Try and let us know if you still have any questions.

  -Dov

• Dreamweaver does not display the images of the root folder

  Dreamweaver does not display the pictures in the folder root in the browser:

  "< a href ="... /... /.. /.. / gen/index.php "> < img src ="... /... /.. ' / gv_logos/gen_logo.png "alt ="Gen"width ="130"height ="60"> < / a >

  "< a href ="... /... /.. /.. / english/mall/home.php "> < img src ="... /... /.. ' / gv_logos/gen_mall_logo.png "alt ="Mall"width ="110"height ="60"> < / a >

  I use Dreamweaver CS6. I checked display > display external file, it is checked. I unchecked it executed the script, still no change.

  I've been in the problem for weeks.

  It's driving me crazy. .

  Thank you all. I finally discovered what the problem was. My ' link to ' was created at the root of the Document.

  For later use, to all those who may have this problem:

  1. Launch Dreamweaver.
  2. Click on "Site" in the top menu.
  3. Select "Manage Sites".
  4. In the 'Manage the Sites' box, select your local site folder. For example, my_new_site
  5. Click on change icon (it's the second icon on the button "Import Site").
  6. The site for my_new_site configuration (for example) is displayed. Now click on "Advanced settings".
  7. Search "link to:" in the options, select 'Site Root '.
  8. Click on 'Save' later, the box disappears.
  9. Click on 'Done'... and you're done!

  You don't need to restart your computer for the settings save constantly. But if that fell safe, Dreamweaver shut down and restart it. All links should display correctly.

  But it is worth mentioning that all of the links in the following format will have to be edited:

  /.../.../main.php

  Just rewrite the link paths not all scripts.

• my iphone 5 s has been disabled. I'm trying to restore my iphone with itunes and itunes asks me to put the password for my iphone. but my iphone does not display the unlock screen. What should I do now?

  my iphone 5 s has been disabled. I'm trying to restore my iphone with itunes and itunes asks me to put the password for my iphone. but my iphone does not display the unlock screen. What should I do now?

  Hello

  Follow the instructions here:

  If you have forgotten the password for your iPhone, iPad or iPod touch, or your device is disabled - Apple supports