blocked when the install window 7

Similar Questions

• When I install Windows xp in a pc laptop hp pavilion 2018tx g4, see the error 0X0000007B? How to fix?

  Hello Sir,

  When I install Windows xp in laptop laptop hp pavilion g4-2018tx, an error show me 0X0000007B.then I am looking for the solution of the internet, someone tell me to try next step-go to the BIOS and disk configuration sata hard then go but unfortunately in my computer, there is no disk sata hard option.i want to install window xp.plz me not to say the procedure how to install Windows xp in laptop.

  Hello

  0x0000007b error code, could mean an inaccessible boot device or a host of other reasons why this error. In the interest of all the possibilities, see the link below for troubleshooting tips.

  http://support.Microsoft.com/kb/324103

  Good luck.

• I get the error message: maigration failed to transfer when I install Windows updates. How can I fix

  I get the error message: maigration failed to transfer when I install Windows updates. How can I fix

  Hello

  Thanks for asking!

  You cannot install updates Windows and error migration was not able to transfer.

  The problem can occur if the update of the components are damaged.

  Is the message of exact error that appears?

  I suggest you to reset the update components and check if the problem persists.

  See the site:

  How to reset the Windows Update components?

  http://support.Microsoft.com/kb/971058

  Warning: this section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, click on the number below to view the article in the Microsoft Knowledge Base:

  How to back up and restore the registry in Windows XP

  http://support.Microsoft.com/kb/322756/

• When you install windows 95, which is the executable that launches the installation process, and where it is located?

  When you install windows 95, which is the executable that launches the installation process, and where it is located?

  The file is setup.exe.  Depending on your version of Windows 95 CD, it could be in the WIN95 folder or in a subfolder of WIN95.

  If you have more Windows 95 questions, great places to get responses are microsoft.public.win95.setup and microsoft.public.win95.general.discussion newsgroups.  It is a Windows XP forum.

• When I install windows 7 at the end of the expansion of windows files editing get an error "0x8007045D.

  Hi when I install windows 7 at the end of the expansion of windows files editing get an error "0x8007045D.

  Hello

  Thanks for posting your query on the Microsoft Community.

  According to the description, I understand that you have found the error code.

  I suggest you refer to the suggestions by Andre Da Costa MVP responded on 27 April 2012 and check if that helps.

  http://answers.Microsoft.com/en-us/Windows/Forum/Windows_7-windows_install/cannot-install-Win7-error-0x8007045d/8cce76b4-25c6-4d07-ACB4-0dfa1ac3f4d3?DB=5

  Hope this information helps. Please let us know if you need any other help with Windows in the future. We will be happy to help you.

• I get the error message: Windows update 0 x 80070490 (2015-08-18-T-10_48_47P) not corrected an error when I install Windows updates. How can I fix?

  I get the error message: Windows update 0 x 80070490 (2015-08-18-T-10_48_47P) not corrected an error when I install Windows updates. How can I fix?

  Hello

  I apologize for the delay in responding.

  This error means that a file (CBS Manifest) that is needed to install updates is corrupt. I suggest to try the procedure described in the following Microsoft Support article and check if it helps. This article consists of the steps to troubleshoot and correct this error.

  https://support.Microsoft.com/en-us/KB/958044

  For more information, you can consult the following Microsoft Help article.

  http://Windows.Microsoft.com/en-us/Windows/Windows-Update-error-80070490#1TC=Windows-7

  Please do not hesitate to visit our Web site for any help with the Windows operating system.

• I had to redo my computer why can't use my product key when I installed windows, the first time

  I had to redo my computer why can't use my product key when I installed windows, the first time

  How to solve the error codes on Windows 7 0xC004C008 Activation of Volume
  http://Windows.Microsoft.com/en-us/Windows7/Windows-7-activation-error-0xC004C008

  Have you tried to restart by phone?

  How to activate Windows 7 manually (activate by phone)
   
  1) click Start and in the search for box type: slui.exe 4
   
  (2) press the ENTER"" key.
   
  (3) select your "country" in the list.
   
  (4) choose the option "activate phone".
   
  (5) stay on the phone (do not select/press all options) and wait for a person to help you with the activation.
   
  (6) explain your problem clearly to the support person.
   
  http://support.Microsoft.com/kb/950929/en-us

• Q327120 error when you install Windows xp sp3

  Original title:
  error code
  When I try my winxp sp3 his watch after error what is the solusion? Pls help

  Hello

  Thanks for posting in the Microsoft community!
  You have reached the right forum for your question. If I understand correctly, you receive the Q327120 error when you install Windows xp sp3. I suggest you follow the troubleshooting steps to check if this may help.

  You did changes to the computer before the show?

  Method 1:
  You can try the steps in knowledge base article and check.
  Error message: Windows Service Pack 1 has detected that one or more protected Core system files on your computer have been modified
  http://support.Microsoft.com/kb/327120

  Method 2:
  

  Perform a clean boot and then try to install and check.
  How to configure Windows XP to start in a "clean boot" State
  http://support.Microsoft.com/kb/310353

  Note: When the diagnosis is complete do not forget to reset the computer to a normal startup. Follow step 7 in the above article.

  Check out the link:
  How to download Windows XP SP3
  http://support.Microsoft.com/kb/322389

  Reference link:
  Steps to take before you install Windows XP Service Pack 3
  http://support.Microsoft.com/kb/950717

  If you need further assistance, please answer and we will be happy to help you.

• When I installed Windows Vista Ultimate oracle virtualbox has stopped working?

  I use Windows Vista Ultimate ISO in Oracle Virtualbox but when I install Windows Vista Ultimate Edition, Oracle VirtualBox is stopped working,:(, que dois_je faire?) my other operating systems in Oracle Virtualbox is very well.

  Hi Obito,

  The question you posted would be better suited on the Oracle Forums.

  http://www.Oracle.com/technetwork/Server-storage/VirtualBox/community/index.html

  https://www.VirtualBox.org/wiki/community

  Let us know if you have other questions about Windows in the future. We will be happy to help you.

• When you install windows vista service Park 1, I have received an error code 80073712 with 13% downloaded only?. Can you help me to complete this process?

  When you install windows vista service Park 1, I have received an error code 80073712 with 13% downloaded only?. Can you help me to complete this process?

  Hi Gore EzekiahTongun

   

  You can see the steps in the below mentioned article Microsoft and verification.

  http://support.Microsoft.com/kb/947366

   

  I hope this helps.

• Error 80073701 when you install Windows 7 Service Pack 1

  I met an error code 80073701 when you install Windows 7 Service Pack 1 and it could not be installed in my PC.

  So, what should I do to solve this problem. Thank you very much!

  Hi Charles Leung,.

  It is sufficient to indicate the complete error message you receive?

  Method 1: Run the Windows Update troubleshooting tool, then check

  Open the Windows Update troubleshooting tool

  http://Windows.Microsoft.com/en-us/Windows7/open-the-Windows-Update-Troubleshooter

  Method 2:  Download and install the update the system tool

  Description of the preparation tool system update for Windows Vista for Windows Server 2008, for Windows 7 and for Windows Server 2008 R2

  http://support.Microsoft.com/kb/947821

• When I install windows 7 on an external hard drive a message will be appear "windows is unable to install any usb drive.

  When I install windows 7 on an external hard drive, a massage will appear "windows is unable to install any usb drive. tell me how to solve this problem.

  Original title: installation problem

  Windows 7 may not be the installation of a device from external storage such as a hard drive external or USB Thumb drive (with the exception of eSATA).

  You must install Windows 7 on a storage attached internal device.

  http://Windows.Microsoft.com/en-us/Windows7/installing-and-reinstalling-Windows-7

• I have tally 7.2 work well in Windows XP, but when I installed window 7, tally 7.2 does not work, how can I solve this problem

  I have tally 7.2 work well in Windows XP, but when I installed window 7, tally 7.2 does not work, how can I solve this problem

  You have a version of Tally that had no support of the years. If you want to continue with the Tally, you will need to upgrade to the latest version...

  This seems to be the official site... http://www.tallysolutionss.com/

  It may be more friendly... http://tallyworld.com/

• Where my Excel and Word has happened when I install Windows 8 from Vista

  I have an old Vista machine and when I installed Windows 8 they programs have disappeared, but the personal files remain.   What should I use to create new documents?

  Hello

  Thanks for posting your question in the Microsoft Community!

  It seems that you have selected "keep nothing" while upgrading to Windows 8 Windows Vista.

  What option did you choose during the upgrade?

  You can consult the section 'what can I keep when I update' ' if I update and keep nothing howw do restore my files after the upgrade "at the following link:

  Upgrade to Windows 8

  http://Windows.Microsoft.com/en-us/Windows-8/upgrade-to-Windows-8

  Re-install Office on Windows 8 using the desktop drive and the product key.

  I hope that helps!
  Please keep us informed if you face because of Windows in the future. We would be happy to help you!

• his quick launch button does not work when I installed windows 8 in my computer hp laptop pavilion dv3z

  1. number and product name
  laptop HP pavilion dv3z

  2 operating system installed (if applicable)
  Windows 8

  3. All changes to your system until the problem occurred
  installed windows 8

  When I installed windows 8 in my pc laptop hp pavilion dv3z, the quick launch of the volume button is always red and the sound is mute... the driver for quick launch buttons and pilot for the sound is also up-to-date... can you help me please?

  When installing the audio driver, it installed following the instructions or mode of compatibility as shown here?

  Based on the software and drivers page for this device, the device was not tested and certified for Windows 8.  This means that some features may not be the same as the device was not designed for Windows 8.  See this site for more information and to find out if it has been tested for Windows 8.

  If the audio driver has not been installed in compatibility mode, I recommend using the 64-bit Windows 7 found here driver and using the related steps above to install in compatibility mode.

  Let me know what happens.