Blue error screen in Pavilion dv2725ee ERROR STOP
Hello
Two years before that I brought HP laptop for my personal use I face intermittently a blue screen during normal use.
Technical error message: STOP: 0x000008E (0XC8ED7C28, 0xC0000005, 0x822F048B, 0x00000000)
Product: HP Pavilion dv2725ee.
Operating system: Windows Vista Home Premium 32 bit Service Pack 2.
Processor: Core 2 duo 2.2 Ghz Ram: 2 GB.
During my normal use the system suddenly change blue screen and showing messages such as windows has stopped the operation because of a hardware failure. Microsoft problem solutions Center they invited to find the specific material that is causing the problem to the manufacturer.
I'm not installed any other hardware or other software that comes with system except antivirus and MS office.
I did the memory diagnostic tool, but not still get no results.
Can I suspect the module of the system memory or any other piece?
kindly help me to find a solution to this problem since the error showing more frequently than before.
Farida kaid
{Information}
The report is not specific to any driver, so I would update all your drivers to the latest available versions.
Tags: Notebooks
Similar Questions
-
Well my computer restarted automatically due to the automatic updates and now he continues to display the Blue error screen and at the bottom it says STOP: 0x0000007E (0 x 80537008, 0xBACCF508, 0xC0000001D, 0xBACCF204)
I did the complete diagnostic test and everything was fine, but the error always happens right as windows is about to start. Also, safe mode does not work as well. Does anyone have any ideas what to do to solve this problem?Quick fix is due to the Kernel patch KB977165 Microsoft applied through Windows updates;
STOP: 0x0000007E, 1st param 0xc000001D through Windows Update KB977165. Uninstalling KB977165 should fix.Boot from your Windows XP CD and start the recovery console (see this link http://support.microsoft.com/default.aspx/kb/307654 on how to use the recovery console)
Once you are in the repair screen...
Type this: CHDIR $NtUninstallKB977165$ \spuninst
Type this: BATCH spuninst.txt
Type this: systemroot
Type this command: exitYou can also do this with a Hiren's BootCD, except that you will need to open the file spuninst.txt manually and copy each line, paste it into a command prompt and let each line.
hope this helps,
Jason/guru -
I get a blue screen that reads (a problem has been detected and Windows has shut down to prevent damage to your computer) last night my computer started poping up saying windows my computer is infected every 2 minutes, it even changed my image of the desktop, I went and deleted the Windows defender thought it was the sorce , DID I SREW UP?
Hello
You probably have one of these fake antivirus programs that affect your system. Can you tell us what the
program who gave the alert was or if it was you heading? When you receive warnings, you might be
infected by is not a good idea to delete legitimate programs that help protect your computer.First makes sure you are clean if we don't need to know the answers to the foregoing.
It can be made repeatedly in Mode safe - F8 tap that you start, however you must also run them
the Windows when you can.Download malwarebytes and scan with it, run MRT and add Prevx to be sure that he is gone. (If Rootkits run UnHackMe)
Download - SAVE - go to where you put it-right on - click RUN AS ADMIN
Malwarebytes - free
http://www.Malwarebytes.org/Run the malware removal tool from Microsoft
Start - type in the search box-> find MRT top - right on - click RUN AS ADMIN.
You should get this tool and its updates via Windows updates - if necessary, you can download it here.
Download - SAVE - go to where you put it-right on - click RUN AS ADMIN
(Then run MRT as shown above.)Microsoft Malicious - 32-bit removal tool
http://www.Microsoft.com/downloads/details.aspx?FamilyId=AD724AE0-E72D-4F54-9AB3-75B8EB148356&displaylang=enMicrosoft Malicious removal tool - 64 bit
http://www.Microsoft.com/downloads/details.aspx?FamilyId=585D2BDE-367F-495e-94E7-6349F4EFFC74&displaylang=enalso install Prevx to be sure that it is all gone.
Download - SAVE - go to where you put it-right on - click RUN AS ADMIN
Prevx - Home - free - small, fast, exceptional CLOUD protection, working with other security programs. It comes
a scan only, VERY EFFICIENT, if it finds something to come back here or use Google to see how to remove.
http://www.prevx.com/ <-->-->
http://info.prevx.com/downloadcsi.asp <-->-->Choice of PCmag editor - Prevx-
http://www.PCMag.com/Article2/0, 2817,2346862,00.asp--------------------------------------------------------
If necessary here are some free online scanners to help the
http://www.eset.com/onlinescan/
http://OneCare.live.com/site/en-us/default.htm
http://www.Kaspersky.com/virusscanner
Other tests free online
http://www.Google.com/search?hl=en&source=HP&q=antivirus+free+online+scan&AQ=f&OQ=&AQI=G1--------------------------------------------------------
Also do to the General corruption of cleaning and repair/replace damaged/missing system files.
Run DiskCleanup - start - all programs - Accessories - System Tools - Disk Cleanup
Start - type this in the search box-> find COMMAND at the top and RIGHT CLICK – RUN AS ADMIN
Enter this at the command prompt - sfc/scannow
How to analyze the log file entries that the Microsoft Windows Resource Checker (SFC.exe) program
generates in Windows Vista cbs.log
http://support.Microsoft.com/kb/928228Run checkdisk - schedule it to run at the next startup, then apply OK then restart your way.
How to run the check disk at startup in Vista
http://www.Vistax64.com/tutorials/67612-check-disk-Chkdsk.html-----------------------------------------------------------------------
If we find Rootkits use this thread and other suggestions. (Run UnHackMe)
I hope this helps.
Rob - bicycle - Mark Twain said it is good.
-
Windows has recovered from an unexpected shutdown:Signature of the problem:Problem event name: BlueScreenThe system version: 6.0.6002.2.2.0.768.3Locale ID: 6153More information about the problem:BCCode: feBCP1: 00000008BCP2: 00000006BCP3: 00000006BCP4: 88B5B000OS version: 6_0_6002Service Pack: 2_0Product: 768_1I tried to disable one of the USB ports in Device Manager and shut down you the computerMy integrated webcam has also stopped working and this is the 1st thing to go wrongCan anyone help?I've studied other forums and nothing I've seen or tried has helped so far
Hello DanielKilleen,
ZIP or download the content of the C:\Windows\minidump
Use SkyDrive to upload collected files
http://social.technet.Microsoft.com/forums/en-us/w7itproui/thread/4fc10639-02dB-4665-993a-08d865088d65Best regards
Matthew_Ha
-
I get the blue screen error - error - Stop 0X0000008E
-Stop error 0X0000008E (0xC00005, 0XC000005, 0X08244c8b, 0XBA50B58C, 0 X 00000)
Hi I get the blue screen error - error - Stop 0X0000008E (0xC00005, 0XC000005, 0X08244c8b, 0XBA50B58C, 0 X 00000) and cannot use the pc in safe mode. I have XP - OS. I really don't want to reformat the HARD drive and you want to avoid reinstalling as much as possibleHi aromaveda,
· Have you made changes on the computer?
Follow these methods.
Method 1: Follow the steps in the article.
You receive a random "0x0000008E" error message on a blue screen in Windows XP
http://support.Microsoft.com/kb/827663
Method 2: Follow these steps:
Step 1: Start the computer in safe mode and check if the problem persists.
A description of the options to start in Windows XP Mode
http://support.Microsoft.com/kb/315222
Step 2: If the problem does not still in safe mode, perform a clean boot to see if there is no conflict of software like clean boot helps you eliminate software conflicts.
How to configure Windows XP to start in a "clean boot" State
http://support.Microsoft.com/kb/310353
Note: After completing the steps in the clean boot troubleshooting, follow the section How to configure Windows to use a Normal startup state of the link to return the computer to a Normal startupmode.
After the clean boot used to resolve the problem, you can follow these steps to configure Windows XP to start normally.
(a) click Start, run.
(b) type msconfigand click OK.
(c) the System Configuration Utility dialog box appears.
(d) click the general tab, click Normal startup - load all services and device drivers and then click OK.
(e) when you are prompted, click on restart to restart the computer.
Method 3: Follow the steps in the article to check the drive for errors.
How to perform disk error checking in Windows XP
http://support.Microsoft.com/kb/315265
Note: If bad sectors are found in the hard drive, then it could try to fix this particular sector. If you have any data on that, it can get lost.
-
Original title: Windows has shut down to not to damage the computer
When I go to install windows, it gets a blue screen with this error:
STOP: 0X0000007B (0XF78D2, 524, 0XC0000034, 0X00000000, 0X00000000)Hello
See the article below that could be useful.
Advanced troubleshooting of errors "Stop 0x0000007B" in Windows XP
http://support.Microsoft.com/kb/324103 -
ERROR STOP 0X0000007B I can't CROSS the BLUE SCREEN
AS YOU CAN SEE FROM THE ABOVE TITLE, I CAN'T GO PAST THE SCREEN BLUE WITH THIS MESSAGE. sAFE MODE WILL NOT WORK. What DO I NEED to TRY NOW? THANKS FOR THE HELP.
1. http://support.microsoft.com/kb/316401
Error message "STOP 0x0000007B" when you restart your Windows XP-based computer2. http://support.microsoft.com/kb/324103
Advanced troubleshooting of errors "Stop 0x0000007B" in Windows XPPossibility: You may receive an error message "Stop 0x0000007B" If your computer is infected with a boot sector virus.
-
Original title: cannot start my computer
When I try to start my computer, the dead Blue error screen appears saying Stop: 0x0000007B (0x80399BB0, 0 C 0000034, 0x00000000, 0x00000000)
Hi WindowsxpUser,
· Did you do changes on the computer before the show?
· What is the brand and model of the computer?
Follow the steps in the article.
How to fix BlueScreen (STOP) errors that cause Windows Vista to shut down or restart unexpectedly
http://support.Microsoft.com/kb/958233
Error message when you start a Windows Vista or Windows 7 computer after changing the mode of the boot drive SATA: "STOP 0x0000007B INACCESSABLE_BOOT_DEVICE".
-
"blue screen error" stop 0x0000003e "appeare
"blue screen error" stop 0x0000003e "appeare
Bug Check 0x3E: MULTIPROCESSOR_CONFIGURATION_NOT_SUPPORTED
This indicates that the system has multiple processors, but they are asymmetric in relation to the other.
Cause
To be symmetric, all processors must be of the same type and level. This system contains processors of different types
You use different processors on your system of MP.
"A programmer is just a tool that converts the caffeine in code" Deputy CLIP - http://www.winvistaside.de/
-
Blue error screen Stop 0X0000007E (0XC0000005, 0X8070194F, 0XF78DAC30, 0XF78DA12C) and when ejecting a CD or DVD
Said event system category 102 event 1003 error view
Error 1000007e, parameter1, parameter 2 8070194f, parameter3, parameter4 f78da92c f78dac30 c0000005.
Customer says that has happened for about a year. Don't know it please help
Hello
Use BlueScreenView, MyEventViewer and other methods of troubleshooting BlueScreens
See the responses in this thread - high two answers.----------------------------------------------------------
References to Vista also apply to Windows 7.
This error (7th) is usually a driver problem and display adapter (video) driver is the most suspicious if
It could be others. Antivirus/antispyware/security programs, major software and hardware (heat)
questions can also cause the error. When you get to the section of the driver to use the Troubleshoot utility my
generic methods in the next message and then return to the if necessary troubleshooting tool.Have you recently added hardware or drivers updated? Don't forget to look in Control Panel - Windows
Updates to see if all drivers have been updated it. Other donor opportunities include the antivirus/anti-
spyware/security programs.When you get to the pilot and sections of the memory of the troubleshooter check the following message to
update drivers and memory test and then return to the troubleshooter if necessary.BCCode: 7F 0x0000007E
Cause
SYSTEM_THREAD_EXCEPTION_NOT_HANDLED bug control is a very common bug control. TO
interpret, you must identify which exception has been generated.Common exception codes are:
0xc0000005: STATUS_ACCESS_VIOLATION indicates a memory access violation has occurred.
For a complete list of exception codes, see the Ntstatus.h file located in the inc directory
the Microsoft Windows Driver Kit (WDK).Solve the problem
If you do not have to debug this problem, you must use certain basic troubleshooting techniques.Make sure you have enough disk space.
If a driver is identified in the bug check message, disable the driver or check with the
Reference of the manufacturer for driver updates.
Try changing video cards.
Check with your hardware vendor for updates to the BIOS.
Disable the BIOS memory options such as implementing caching or shading.
If you plan to debug this problem, you may find it difficult to get a stack trace. Parameter 2
(the address of the exception) must identify the driver or function that caused the problem.If the exception code 0 x 80000003 occurs, a hard-coded breakpoint or assertion was hit, but the system
has been launched with the /nodebug switch... This problem should occur infrequently. If it occurs repeatedly,
Make sure that a kernel debugger is connected and the system is booted with the/debug switch.In case of exception code 0 x 80000002, the trap frame provides additional information.
If you do not know the specific cause of the exception, consider the following questions:
Hardware incompatibility. Make sure all new hardware that is installed is listed in the
List of Microsoft Windows Marketplace tested products.
Service system or driver faulty device. A service driver or defective peripheral system can be
responsible for this error. Hardware problems, such as the incompatibilities of the BIOS, memory, conflicts
and IRQ conflicts can also generate this error.
If a driver is listed by name in the bug check message, disable or remove that driver. Disable
or remove drivers or services that have been recently added. If the error occurs during startup
sequence and the system partition is formatted with the NTFS file system, you may be able to use safe
Mode to rename or to delete the faulty driver. If the driver is used as part of the system startup procedure
in Safe Mode, you must start the computer by using the Recovery Console to access the file.If the problem is associated with Win32k.sys, the source of the error may be a third remote
control program. If this software is installed, you can remove the boot of the computer service
by using the Recovery Console, and then by removing the offending system service file.Check the system log in Event Viewer for additional error messages that might help identify the
device or the driver that generated the bug check 0x7E.You can also disable memory cache BIOS may try to resolve the error. You should also
Run the diagnostics of material, especially the scanner memory, which provides the manufacturer of the system.
For more information about these procedures, see the manual of your computer.The error that generates this message may occur after the first reboot during Windows Setup, or
Once the installation is complete. A possible cause of the error is lack of disk space for installation and system
BIOS incompatibilities. For problems during the installation of Windows that are associated with the absence of disc
space, reduce the number of files on the disk drive hard target. Find and delete any temporary
the files that you do not have to have files hidden Internet, backup application and .chk files files that
contain fragments of file saved to disk scans. You can also use another hard drive with more drive
free space for the installation. You can solve the problems of BIOS by upgrading the version of the system BIOS.BCCode: 7F 0x0000007E<-- read="">-->
* 1141.html? order = votes http://www.faultwire.com/solutions-fatal_error/System-thread-exception-not-HANDLED-0x0000007E--------------------------------------------------------------------------
Look in the Event Viewer to see if something is reported on those.
http://www.computerperformance.co.UK/Vista/vista_event_viewer.htmMyEventViewer - free - a simple alternative in the standard event viewer
Windows. TIP - Options - Advanced filter allows you to see a time rather
of the entire file.
http://www.NirSoft.NET/utils/my_event_viewer.htmlHere are a few ways to possibly fix the blue screen issue. If you could give the blue screen
info that would help. Such as ITC and 4 others entered at the bottom left. And all others
error information such as codes of STOP and info like IRQL_NOT_LESS_OR_EQUAL or PAGE_FAULT_IN_NONPAGED_AREA and similar messages.As examples:
BCCode: 116
BCP1: 87BC9510
BCP2: 8C013D80
BCP3: 00000000
BCP4: 00000002or in this format:
Stop: 0 x 00000000 (oxoooooooo oxoooooooo oxoooooooo oxooooooooo)
Tcpip.sys - address blocking 0 x 0 00000000 000000000 DateStamp 0 x 000000000It is an excellent tool for displaying the blue screen error information
BlueScreenView scans all your minidump files created during ' blue screen of the.
http://www.NirSoft.NET/utils/blue_screen_view.html
death ' crashes and displays information about all accidents of a table.
FreeBlueScreens many are caused by drivers of old or damaged, in particular the video drivers
However, there are other causes.You can do mode if necessary safe or the Vista DVD command prompt or
Options recovery if your system is installed by the manufacturer.This tells you how to access the System Recovery Options and/or a Vista DVD
http://windowshelp.Microsoft.com/Windows/en-us/help/326b756b-1601-435e-99D0-1585439470351033.mspxYou can try a system restore to a point before the problem started when one exists.
How to make a Vista system restore
http://www.Vistax64.com/tutorials/76905-System-Restore-how.html-------------------------------------------------------------------------
Start - type this into the search-> find COMMAND to top box and RIGHT CLICK-
RUN AS ADMINEnter this at the command prompt - sfc/scannow
How to analyze the log file entries that the Microsoft Windows Resource Checker (SFC.exe)
program generates in Windows Vista cbs.log
http://support.Microsoft.com/kb/928228The log can give you the answer if there is a corrupted driver. (Does not work
tell all possible driver issues).Also run CheckDisk, so we cannot exclude as much as possible of the corruption.
How to run the check disk at startup in Vista
http://www.Vistax64.com/tutorials/67612-check-disk-Chkdsk.html-------------------------------------------------------------------------
Often drivers up-to-date will help, usually video, sound, network card (NIC), WiFi, part 3
keyboard and mouse, as well as of other major device drivers.Look at the sites of the manufacturer for drivers - and the manufacturer of the device manually.
http://pcsupport.about.com/od/driverssupport/HT/driverdlmfgr.htmHow to install a device driver in Vista Device Manager
http://www.Vistax64.com/tutorials/193584-Device-Manager-install-driver.htmlHow to disable automatic driver Installation in Windows Vista - drivers
http://www.AddictiveTips.com/Windows-Tips/how-to-disable-automatic-driver-installation-in-Windows-Vista/
http://TechNet.Microsoft.com/en-us/library/cc730606 (WS.10) .aspx-------------------------------------------------------------------------
How to fix BlueScreen (STOP) errors that cause Windows Vista to shut down or restart
quit unexpectedly
http://support.Microsoft.com/kb/958233Troubleshooting, STOP error blue screen Vista
http://www.chicagotech.NET/Vista/vistabluescreen.htmUnderstanding and decoding BSOD (blue screen of death) Messages
http://www.Taranfx.com/blog/?p=692Windows - troubleshooting blue screen errors
http://KB.wisc.edu/page.php?id=7033-------------------------------------------------------------------------
In some cases, it may be necessary.
The Options or Vista recovery disk Startup Repair
How to do a startup repair
http://www.Vistax64.com/tutorials/91467-startup-repair.htmlThis tells you how to access the System Recovery Options and/or a Vista DVD
http://windowshelp.Microsoft.com/Windows/en-us/help/326b756b-1601-435e-99D0-1585439470351033.mspxI hope this helps.
Rob Brown - MS MVP - Windows Desktop Experience: Bike - Mark Twain said it right.
-
When you start to print on the hp 6100 the computer stops and a blue error screen
Starts to print on the hp 6100 the computer when to stop an a blue error screen appears, and the computer must be restarted? Help this is driving me nuts.
Hi William,.
Do you receive an error message or error code?
Blue screen can be caused by hardware and software issues.
Try the following and see if it helps.
Method 1:Try to uninstall and reinstall the printer drivers and check if it helps.
Uninstall a program: http://windows.microsoft.com/en-US/windows7/Uninstall-or-change-a-program
Install a printer: http://windows.microsoft.com/en-in/windows7/install-a-printer
Download HP drivers and software - specify product name
Method 2:Refer to the steps in the following Microsoft article and check.
Resolve stop (blue screen) errors in Windows 7:http://windows.microsoft.com/en-US/windows7/Resolving-stop-blue-screen-errors-in-Windows-7
Notes:
Running chkdsk on the drive if bad sectors are found on the disk hard when chkdsk attempts to repair this area if all available on which data can be lost.
When you perform the system restore to restore the computer to a previous state, programs and updates that you have installed are removed.
Before you perform the upgrade on the spot, I would recommend you to back your files using windows backup.
Note: I suggest you to provide us with the Mini Dump files to get a better understanding of the issue.Follow the steps to copy the contents of the minidump files:
(a) copy the contents of \Windows\Minidump to another (temporary) location or anywhere on your machine.
(b) zip copy.
(c) attach ZIP archive to your message by using the button (attachments) "trombone".
(d) please upload them to a service like Skydrive file sharing.
You can view the following link to find out how to send the files minidump using Skydrive:
Keep us informed on the status of the issue.
-
whenever I try to connect wifi, a blue screen with Windows 7 error Stop: 0x0000007E comes and windows restart.can any1 help me with this problem. my wireless card is qualcomm atheros AR5007 802.11b/g.my windows is windows 7 ultimate.please help with this issue.i m attaching files and dump the error imagescreenshot of error:
http://sdrv.Ms/Nn8gDA
memory dump file:http://sdrv.Ms/NiXJdJAlso, can you provide the latest files minidump since reinstalling the NIC driver.
-
Windows XP will not load past the Blue error screen
Hi, wondering for a while if someone can help me...
My xp system will not load past the Blue error screen that is displayed when the computer stopped suddenly or inadequate.
No matter what are the measures that you choose to take (safe mode, the most recent configurations... etc) the system will just beyond the blue screen on the windows logo download page, where the loading bar moves about 10 seconds before returning to the blue loading page.
So far I have tried to leave the computer as long as an unused months while I was abroad, remove the battery for varying amounts of time and leaving the computer as long as a day.
In the absence of a recovery disk, I have no idea how to do to return to the form and would like to receive advice or suggest, keeping in mind I'm not a computer genius (if had'nt you may have guessed). Preferably, without losing my element pictures and videos stored on the hard drive, but it's just preference.
Thank you, Jay
Hello
It does not seem good friend if the Windows operating system does not start even using safe mode, then I don t think you will be able to run the operating system without new OS reinstallation. :(
To back up data from the HARD drive I recommend that you connect the internal HARD drive to external USB HDD controller and a backup of the HARD drive on another computer.
Then you could try to reinstall the operating system on your laptop using the Toshiba Recovery CD
See you soon
-
Blue error screen that says windows has been shut down to avoid damage.
Help, please. We have an office that works under windows xp and we receive a blue screen error message. I need help running system restore because it does not run windows if it keep windows shut down and leaving me with a blue screen error message.
We need to know what the Blue error screen and if it referred to specific files and/or numbers. Also, please include a description of your computer and its recent history.
http://www.Aumha.org/win5/kbestop.htm - Stop errors
MS - MVP - Elephant Boy computers - don't panic!
-
Ok. I have Ubuntu installation. While re - partition my drive, the computer froze during resizing a NTFS partition, and while in Ubuntu Live (from the CD) he told me to run chkdsk f, then restart twice. So I found an old XP disc and tried to boot from it in mode of recovery etc but he finished the preliminary tasks and starts to run windows, I get this error blue screen (blue screen error 0x0000007B (0xF78DA63C, 0xC0000034, 0x00000000, 0x00000000)).
I don't understand why I can't launch the recovery on the drive mode to try to recover my hard drive. Help!Hello
I would recommend that you follow the steps in this article and see if the problem still occurs.
Advanced troubleshooting of errors "Stop 0x0000007B" in Windows XPSee also:
Maybe you are looking for
-
Satellite Pro L670 - 14 p - problem with 8 GB of RAM
Hi all Recently, I bought 8 GB of ram for my toshiba. its 2 into 4 gb sticks, "integral" IN3V4GNYBGI, DDR3 1066 mhz SODIMM. BIOS is seeing all this ram properly, but after the opportunity to get into the bios, the laptop is freezing. I have black scr
-
Satellite A200-1AE (PSAECE) need drivers for XP
I would be grateful if someone with the same {PSAECE A200-1AE} or similar model (with Nvidia Geforce 7300 Turbocache) was able to install Windows XP success on their mobile phones. I have tried for centuries to find a set of drivers for my laptop but
-
If you want to learn the basics of using Windows 8, HP has a support topic that addresses exactly this. The topics included are: Getting started with Windows 8 Learn how to use the new interface to start, charm Bar and gestures Printing from Windows
-
Windows Update has not been updated since 16/01/2012
I had problems with windows update for some time. When I close my computer it says update of 123 steps, but still it will never update anything.
-
When I try to do a restore I get a disc error message
He suggested that I run a disk check, but when I try to annex anything that happens on statrtup. Same thing when I try to make a backup disk