Blue error screen 0x0000007B (0xF78DA63C, 0xC0000034, 0x00000000, 0x00000000)

Similar Questions

• How to overcome error * stop: 0X0000007b (0xf78d2524, 0xc0000034, 0x00000000, 0x00000000)

  Hello..

  I'm editing O. S XP for my laptop of Lenovo ideapad Z560 after reformulating BIOS and copy the files over and before the program installation the following error will come (it has no virus in my laptop).

  the error is: * stop: 0X0000007b (0xf78d2524, 0xc0000034, 0x00000000, 0x00000000)

  before I was using two operating systems on different (windows7 & xp2) disks I thought of removingtwo os and re install windows xp3 then I had been troubled by the error mentioned above

  Please give me the solution for this problem

  Hello

  I suggest you to follow the steps in this link and check if it helps:
  http://support.Microsoft.com/kb/316401

  For more information, see this link:
  http://support.Microsoft.com/kb/324103

  It will be useful.

• Blue error screen 0x0000007B in Windows XP after installing KB977165 (MS10-015 - February 2010)

  I updated 11 windows xp updates today from Microsoft.com and restarted my pc as it was asked to. (Certainly there was absolutely NO CHANGE in my installation of software or hardware apart from this updates)

  Therefore, Windows cannot restart once again! It stops at the blue screen with the following message:
  
  A problem has been detected and windows has shut down to prevent damage to your computer.

  PAGE_FAULT_IN_NONPAGED_AREA
  
  Technical information:

  STOP: 0 X 00000050 (0 X 80097004, 0 X 00000000, 0X00000001, 0 X 80515103).
  
  I tried all sorts of relaunch option namely mode security etc.  but all comes down to the blue screen.

  I hope that Microsoft technical support has an answer on how to solve this problem.

  Please answer if someone has an answer.

  Thank you

  Hi all

  I wanted to post a link to the Blog of the MSRC team that deals with this particular situation.

  This is the best place to go for updates on the issue discussed in this thread.

  http://blogs.technet.com/MSRC/

  Thank you all for the great discussion, I will certainly update the thread that more information will be available.

  Thank you, Kevin

• Blue screen with STOP error 0x0000007B (0xBA4CF524, 0xC0000034, 0x00000000, 0x00000000)

  I have my Acer 5920 laptop, 2 GB of RAM and 160 hard drive, last stop system time correctly with all the files to day, but when I restart then comes windows XP Jean-Christophe and then a blue screen with the error. Nor I have install new software or remove something in the laptop. My system was perfect, and that was before the last stop.
  I have Windows XP SP2-teacher-pack. I have the original CD of this package.
  But when I use the CD then nothing is happen and come same messgae of error. I do not have any other CD bootable for windowXP except your originalCD.
  Please suggest me what I should do to fix my probem. I'm not to much expert for the formatting and other things computer.

  After reading your following suggession:
  Here are a few things to try:
  The first thing to do is to boot your system and start pressing F8 as soon as it starts booting.  You will get the Windows startup options screen.  Select "Disable automatic restart in the event of system failure" and let it restart.  When it starts, it can now stop with an error screen and give an error message and code.

  Disconnect all external devices (printers, USB Hub, drives external, etc.) and try to start.

  I got the result of the error that comes on a blue screen after you follow your process-blue screen with STOP error 0x0000007B (0xBA4CF524, 0xC0000034, 0x00000000, 0x00000000)

  Thanks in advance for help
  What about nice Rajneesh

  Just one quick response for others...

  Go to your bios to change the mode of training of your s - ata AHCI or IDE Compatible mode or all that apply :) Windows XP is not like SATA, because it has no native support for it. At the start of the second phase of a Setup program, it would fail with this BSOD.

  Also read the following Microsoft article that describes many other causes (including file system damage):Troubleshooting of errors "Stop 0x0000007B" in Windows XP Advanced

  Sometimes, your BIOS will provide its default settings after a system crash or a configuration. Should not happen, but it is...

  For BIOS-discussions, see: 0x0000007B 0xBA4cf524 - Forum of Support PC - Free Computer help , XP installation: * STOP: 0x0000007B (0xF78D2524, 0xC0000034, 0x00000000, 0x00000000)? - Page 4 - Cyber Tech Help Support Forums , 0x0000007B (0xBA4CF524 - Google zoeken .)

  Have fun, and... Peace!

  Devvie

  ~ ~ ~ * E-mail address is removed from the privacy * ~ ~ ~

  CONARE nullius momenti videri fortasse missilibus careant
  ------
  All the spelling mistakes are my own and may not be distributed under the GNU General Public License! -(© 95 1 by Coredump; 2-10 by DevNullius)

• When I try to start my computer, the Blue error screen appears saying Stop: 0x0000007B (0x80399BB0, 0 C 0000034, 0x00000000, 0x00000000)

  Original title: cannot start my computer

  When I try to start my computer, the dead Blue error screen appears saying Stop: 0x0000007B (0x80399BB0, 0 C 0000034, 0x00000000, 0x00000000)

  Hi WindowsxpUser,

  ·         Did you do changes on the computer before the show?

  ·         What is the brand and model of the computer?

  Follow the steps in the article.

  How to fix BlueScreen (STOP) errors that cause Windows Vista to shut down or restart unexpectedly

  http://support.Microsoft.com/kb/958233

  Error message when you start a Windows Vista or Windows 7 computer after changing the mode of the boot drive SATA: "STOP 0x0000007B INACCESSABLE_BOOT_DEVICE".

  http://support.Microsoft.com/kb/922976

• error 0x0000007B (0xf78a2524, 0xC0000034, 0x00000000, 0x00000000) after the installation of the new RAM

  I get the BSOD when booting with the STOP: 0x0000007B (0xf78a2524, 0xC0000034, 0x00000000, 0x00000000) message. The computer is a Dell Dimension 8400. I installed the new ram to find this message and we tried him swinging back the RAM on the former with the problem still persists.

  Hello

  Very good chance you loosened a cable or connection when you replaced the
  memory.

  Check with Dell Support, their drivers and documentation online and ask in the Dell
  forums for known issues.

  Dell support
  http://support.Dell.com/

  Dell support drivers - product manual & warranty Info (left side) - and much more
  http://support.Dell.com/support/index.aspx?c=us&l=en&s=DHS

  Dell forums
  http://en.community.Dell.com/forums/
  ================================================================

  Check the disk for malware:

  Create a Bootable CD with the Trinity Rescue Kit - free - which comes with 5 antivirus programs
  Integrable Hirem is another choice - more can be found using Google.

  Trinity Rescue Kit - download on top right of the page
  http://trinityhome.org/home/index.php?wpid=1&front_id=12

  CD of Hirem boot is another good choice
  http://www.hirensbootcd.NET/Download.html
  http://www.hirensbootcd.NET/CD-contents/138-HBCD-111.html

  ===================================================================

  You can also save the data and re-install Windows 7. The hard drive can be set
  another computer as a 2nd drive (the best) or in an external USB enclosure. Either would allow
  allows you to copy the data to removable media such as CD, DVD or other USB drives.

  Or you can use a boot Ubuntu CD to back up data.

  Use Ubuntu Live CD to backup files from your Windows computer dead
  http://www.howtogeek.com/HOWTO/Windows-Vista/use-Ubuntu-Live-CD-to-backup-files-from-your-dead-Windows-computer

  ===================================================================

  For slightly more:

  BCCode: 7B 0x0000007B<-- read="" this="">

  INACCESSIBLE_BOOT_DEVICE bug control has a value of 0x0000007B. This bug check indicates that the Microsoft Windows operating system has lost access to the system partition during startup.

  Important information if you have received a STOP Code

  If you have received a blue screen error, or stop code, the computer stopped abruptly to protect against data loss. A hardware device, its driver or software might have caused this error. If your copy of Windows is shipped with your computer, contact your computer manufacturer. If you purchased Windows separately from your computer, Microsoft provides support. To find contact information for Microsoft or the manufacturer of your computer connect with Support.

  If you have experience with computers and try to recover from this error, follow the steps in the Microsoft article solution STOP (blue screen) errors in Windows.

  The following actions could prevent a mistake like this does not happen:

  1. Download and install updates for your computer from Windows Update device drivers.
  2. Scan your computer for computer viruses.
  3. Check your hard drive for errors.

  Cause

  Bug INACCESSIBLE_BOOT_DEVICE control often occurs due to a failure of the boot device. During the initialization of the I/O system, the boot device driver could have no initialize the boot device (usually a hard drive). Initialization of file system may have failed because it does not recognize the data on the boot device. In addition, repartition the system partition or installing a new SCSI adapter or disk controller could encourage this error.

  This error can also occur because of incompatible disc material. If the error occurred in the initial configuration of the system, the system have maybe installed on an unsupported drive or a SCSI controller. Some controllers are supported only by the drivers that are in the library of drivers Windows (WDL). (These drivers require the user to perform a custom installation.)

  
  Resolution

  This error always occurs during the startup of the system. This error often occurs before the debugger connection, kind of debugging can be difficult, if not impossible.

  Fix a defective boot device: If a boot device is at fault, you must change the boot options. For more information changing these options, see Software Configuration on the target computer.

  Solve a problem of incompatible hard disk: If the installation program automatically detects the controller, you may have to skip the detection and the disc of the specific manufacturer allows to load the driver. Also, check the availability of updates for the firmware of the system BIOS and SCSI controller. Updates of this kind are usually available on the website or BBS of the hardware manufacturer.

  Delete all material recently added, especially of hard disks or controllers, to see if the error is resolved. If the problematic material is a hard drive, the firmware version of the drive may be incompatible with your version of the Windows operating system. Contact the manufacturer for updates. If you have removed another material element and the error is resolved, conflicts of port IRQ or i/o likely exist. Reconfigure the new device according to the manufacturer's instructions.

  Confirm that the hard disk drivers, hard disk controllers and SCSI adapters are listed in the list of the products tested Microsoft Windows market.

  If you have recently added a driver, restart your computer, and then press F8 to character-based menu that displays the choice of operating system. In the menu of Advanced Options , select the last known good Configuration option. This option is most effective when you add a single driver or service at a time.

  In addition, check your computer for viruses using any update, commercial software that examines the Master Boot Record of the disk hard antivirus. All systems of Windows files can be infected by viruses.

  This error can also occur due to corruption of the hard drive. Run Chkdsk /f /r on the system partition. You must restart the computer before the start of the analysis of disk. If you cannot start the computer due to the error, use the Recovery Console and run Chkdsk/r.

  If you cannot start the system in the last known good configuration, you should try to boot from the Windows CD. Then, you can run Chkdsk from the Repair Console.

  Warning   If your system partition is formatted with the FAT file system the long file names that use the Windows operating system could be damaged if you use Scandisk or another MS-DOS-based disk tool to verify the integrity of your hard disk from MS-DOS. Always use the version of Chkdsk that matches your version of Windows.

  If your system has SCSI adapters, contact the card manufacturer for updated Windows drivers. Try to disable sync negotiation in the SCSI BIOS, check the wiring and the SCSI ID of each device and confirming the proper termination. For IDE devices, define the IDE port integrated as primary only. Also check each IDE device for setting good master/subordinate/stand alone . Try to remove all IDE devices except for the hard drives. Finally, check the system log in Event Viewer for additional error messages that might help identify the device or driver that generated the error.

  BCCode: 7B 0x0000007B<-- read="" this="">
  * 1138.html? order = votes http://www.faultwire.com/solutions-fatal_error/Check-for-viruses-on-your-Computer-0x0000007B-

  =================================================================

  If you do not have a Windows 7 disc, you can borrow a friends because they are not a copy
  protected. The manufacturer of your system will also sell the physical DVD cheap since you already
  Clean Windows. You can also do an ERD on another computer.

  Try the Startup Repair - (if at anytime, benefit you from some, but not full access coming to Windows
  return and then try to startup repair.)

  How to start on the System Recovery Options in Windows 7
  http://www.SevenForums.com/tutorials/668-system-recovery-options.html

  What are the system recovery options in Windows 7?
  http://Windows.Microsoft.com/en-us/Windows7/what-are-the-system-recovery-options-in-Windows-7

  Try the disk Options recovery or Windows 7 startup repair.

  How to run a startup repair in Windows 7
  http://www.SevenForums.com/tutorials/681-startup-repair.html

  Also from the command PROMPT on the Console (if possible) recovery or a Windows 7 disc

  Start - type in the search box - find command top - RIGHT CLICK – RUN AS ADMIN

  sfc/scannow

  How to fix the system files of Windows 7 with the System File Checker
  http://www.SevenForums.com/tutorials/1538-SFC-SCANNOW-Command-System-File-Checker.html

  Then run checkdisk (chkdsk).

  How to run check disk in Windows 7
  http://www.SevenForums.com/tutorials/433-disk-check.html

  Retry After Chkdsk startup repair.

  If after those you can try the system restore to fashion without failure or the valuation or Windows 7
  disc.

  How to do a system restore in Windows 7
  http://www.SevenForums.com/tutorials/700-system-restore.html

  --------------------------------------------------------------------

  If you need to repair disks - these help repair Windows not re-install.
  Often an ERD will help you when the recovery disk is not - use OPTION 2 to
  make the disc.
  
  How to create a Windows 7 system repair disc
  http://www.SevenForums.com/tutorials/2083-system-repair-disc-create.html

  ======================================

  If necessary:

  What to do if Windows does not start correctly
  http://Windows.Microsoft.com/en-us/Windows-Vista/what-to-do-if-Windows-wont-start-correctly

  How to start on the System Recovery Options in Windows 7
  http://www.SevenForums.com/tutorials/668-system-recovery-options.html

  What are the system recovery options in Windows 7?
  http://Windows.Microsoft.com/en-us/Windows7/what-are-the-system-recovery-options-in-Windows-7

  How to do a repair installation to repair Windows 7
  http://www.SevenForums.com/tutorials

  I hope this helps.

• Lenovo SL500 Windows Vista crashed with STOP: 0x0000007B (0x80599BB0, 0xC0000034, 0x00000000, 0x00000000) error and won't start.

  Original title: Lenovo SL500 Windows Vista crashed with STOP error message and won't start

  Hello peoples,
  I just installed an iMicro Bluetooth adapter on my computer, and then I wanted to restart my computer. When I turned it on, loading like regular until right after the Vista loading screen, when the Blue Screen of Death (a blue screen with an error on this subject) flashed for about 1/2 second and then restarted my computer. Then he asked me if I wanted to load startup repair or simply start WIndows normally and I chose to start WIndows normally, but it's the same thing, so when the computer is restarted again, I chose the Startup Repair. He said that if I inserted an external device in my computer for me to remove it. But I had no external devices in my computer at the same time! I already pulled the iMicro adapter! So when my computer restarted again, I pressed the button Lenovo Care and charge of Lenovo Rescue and Recovery 4. (This is where I am now, typing away in the Opera browser.) I tried to find help, but could not find anythign useful so far. I installed for many drivers, updates, patches, etc. But none have anything to remove the blue screen of death. Now, after 7 hours, I really frustrated, and this is my last hope! (I don't want to save my hard drive and reinstall, because I paid more than 250 applications and more than 270 free programs on my computer! Of more, more than 350 iPad apps, of which a few are paid! Oh and 700 iBooks!)
  Help, please! I'm really desperate right now, and any help would be appreciated!
  Thanks in advance!

  PS I run Windows Vista Home Basic SP2 (I think) on a Lenovo ThinkPad SL500 (NOT SL500c!)

  PPS Lenovo all computers have this Lenovo Rescue Recovery 4, which is like an operating system of its own. It has a browser that you can install updates and other things. Right now I use Rescue and Recovery. Thanks again in advance and please answer my question! I had this problem for a week and I'm in school tomorrow! Thanks again!

  EDIT: The error message went like this:

  A problem has been detected and Windows has shut down to prevent damage to your computer.

  If this is the first time you've seen this Stop error screen, restart your computer. If this screen appears again, follow these steps:

  Check for viruses on your computer. Remove the hard drives newly installed on the hard disk controllers. Check your hard drive to ensure that it is configured and completed proeprly. Run CHKDSK /F to check for hard drive corruption, and then restart your computer.

  Technical information:

  STOP: 0X0000007B (0X80599BB0, 0XC0000034, 0X00000000, 0X00000000)

  Thanks for the billionth time!

  have you tried diving into the blue tooth to the computer with a usb cable before starting the computer u? Sometimes it works

• error 0x0000007b (0xf78d2524, 0xc0000034 0x00000000 0x00000000)

  My son has an acer 5735 laptop that was infected by some kind of virus or spyware. Tried to format the hard drive and reinstall windows but had the error 0x0000007b (0xf78d2524, 0xc0000034 0x00000000 0x00000000). So I bought a new hard drive and got the same message. I don't know what to do, I read several possible fixes but do not know what I should try. Please help if you can. Thank you!

  Hi Djlhope,

  You receive the STOP error: 0x0000007B, for various reasons. You can access the links below and follow the steps in the article to resolve error STOP 0x0000007B on your computer.

  http://support.Microsoft.com/kb/324103

  Hope this helps and let us know the result.

  Thank you and best regards,

  Srinivas R

  Microsoft technical support.

  Visit our Microsoft answers feedback Forum and let us know what you think.

• STOP 0X0000007B 0XF7A1863C 0XC0000034 0X00000000 0X00000000

  Original title: STOP CODES

  STOP 0X0000007B 0XF7A1863C 0XC0000034 0X00000000 0X00000000, WHICH IS GOING ON THIS MACHINE IT WILL START TO A CD AND STOPS IN THE MIDDLE OF LOADING WINDOWS.   WHAT CAN BE DONE RESSEMELABLE THE PROBLEM?  DELL OPTIPLEX 755

  Hello

  1 did you the hardware changes to your computer?
  2. you are trying to install Windows XP? When you get this error message?

  This problem can occur if the new motherboard contains an embedded IDE controller that has a different chipset that the card mother original. See the articles below and check if this can help you to solve this problem.

  Advanced troubleshooting of errors "Stop 0x0000007B" in Windows XP
  http://support.Microsoft.com/kb/324103

  Error message "STOP 0x0000007B" when you restart your Windows XP-based computer
  http://support.Microsoft.com/kb/316401

  I hope this helps.

  Thank you, and in what concerns:
  Shekhar S - Microsoft technical support.

  Visit our Microsoft answers feedback Forum and let us know what you think.
  If this post can help solve your problem, please click the 'Mark as answer' or 'Useful' at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.

• 0x0000007B (0x80D86B58, 0xC0000034, 0x00000000, 0 x 0000000)

  I recently changed my motherboard for a better and at the start of windows 7 is I get this BSOD error

  STOP: 0X0000007B (0X80D86B58, 0XC0000034, 0X00000000, 0 X 0000000)

  What does this mean and how to solve this? I read somewhere that this has to do with the hard drive. I know that he sees the HARD drive because it appears in the BIOS and I've accessed via diskpart although the drive letters have changed for some reason any. I ran the recovery without success. Says he can not solve the problem manually.

  If the startup repair does not work, try a repair installation before wipe you it: http://www.sevenforums.com/tutorials/3413-repair-install.html

• P2V of win 7 - getting STOP: 0x0000007B (0x80786B50, 0xC0000034, 0x00000000, 0x00000000)

  Hi, trying to P2V a win 7, starting VM to BSOD - STOP: 0x0000007B (0x80786B50, 0xC0000034, 0x00000000, 0x00000000).

  Converted into ' slots tension "on the local computer.

  V5.0.0 build 470252 Converter standalone

  (I tried v5.1 but had an error "unable to get hardware information", so down converter versions)

  -writes the new virtual machine on a separate SATA drive, attached to the local computer

  -attempt to start the virtual machine using vmware workstation - version 9.0.2 build-1031769 (although the destination version of the converter is workstation 8)

  -for converting the value of the "disk controller" IDE

  Attached are the vmware.log and .vmx files

  I know STOP 0x0000007B is well worn territory and I googled and tried everything I have found over the past two days.  I must be missing something basic, but don't see it. I'm pretty frustrated at this point and could use a helping hand.  Any help would be greatly appreciated.

  Thank you

  Jay

  Welcome to the community,

  for Windows 7, the controller, you have to select in the wizard's "LSI Logic SAS".

  André

• I get a blue error screen, and I suspect that it is a driver problem.

  Original title: can someone look at my mini dump file?

  I get a blue error screen, and I suspect that it is a driver problem. I can however point out from the dump file. Can anyone help? I have the latest file in my documents in Windows Live folder.

  Thank you.

  You have a fatal hardware error:

  Bug Check 0 x 124: WHEA_UNCORRECTABLE_ERROR

  This bug check indicates that a fatal hardware error occurred

  Record ID: 01cb520eaf797705
  Severity: Fatal (1)
  Length: 928
  Creator: Microsoft
  Notify the Type: Machine Check Exception
  Timestamp: 09-12-2010 0:09:00
  Flags: 0x00000002 PreviousError

  ===============================================================================
  Section 0: Generic processor
  -------------------------------------------------------------------------------
  Descriptor of @ fffffa80060b4838
  Article @ fffffa80060b4910
  Shift: 344
  Length: 192
  Flags: 0 x 00000001 primary
  Gravity: Fatal

  Proc. Type: x 86 / x 64
  All Instr. : x 64
  Error type: BUS error
  Operation: generic
  Flags: 0x00
  Level: 0
  CPU version: 0x000000000001067a
  Processor ID: 0 x 0000000000000000

  ===============================================================================
  Section 1: x 86 / x 64 specific to the processor
  -------------------------------------------------------------------------------
  Descriptor of @ fffffa80060b4880
  Article @ fffffa80060b49d0
  Shift: 536
  Length: 128
  Flags: 0x00000000
  Gravity: Fatal

  Local APIC Id: 0 x 0000000000000000
  CPU Id: 7 a 06 01 00 00 08 00 04 - bd e3 08 0c ff fb eb bf
  00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00
  00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00

  Proc. Info @ fffffa80060b49d0 0

  ===============================================================================
  Section 2: x 86 / x 64 MCA
  -------------------------------------------------------------------------------
  Descriptor of @ fffffa80060b48c8
  Article @ fffffa80060b4a50
  Shift: 664
  Length: 264
  Flags: 0x00000000
  Gravity: Fatal

  Error: BUSL0_SRC_ERR_M_NOTIMEOUT_ERR (Bank of Proc 0 0)

  Update the BIOS, check that the CPU temperature is not too high. If this does not work, replace the CPU.

  André

  "A programmer is just a tool that converts the caffeine in code" Deputy CLIP - http://www.winvistaside.de/

• Satellite L675D: Blue error screen after upgrading to Windows 8

  Hello

  I recently updated my laptop to Windows 8 Toshiba and whenever I use it, after 5-10 minutes, I get a page of the Blue error screen and restart the laptop.

  The problem is really annoying.

  I discovered that if I plug the battery charger, the phone works normally, but I want to solve the problem correctly.

  What should I do?

  I m wondering about your model of laptop. What cell phone do you have exactly?

  Regarding your question:
  I would like to get this right, with the battery it works ok, but when the AC adapter is plugged, it crashes?

  What happens when you connect the front adapter from the laptop would be turned on?

  How have you installed the Windows 8? Move the laptop Win 7 to Win 8 or have you installed Windows 8 clean system?
  Are installed all the drivers Toshiba Windows 8?

  Another idea:
  Go to Windows 8 Device Manager and uninstall the device called compatible ACPI control method battery
  Restart the machine and check how it works.

• Windows XP will not load past the Blue error screen

  Hi, wondering for a while if someone can help me...

  My xp system will not load past the Blue error screen that is displayed when the computer stopped suddenly or inadequate.

  No matter what are the measures that you choose to take (safe mode, the most recent configurations... etc) the system will just beyond the blue screen on the windows logo download page, where the loading bar moves about 10 seconds before returning to the blue loading page.

  So far I have tried to leave the computer as long as an unused months while I was abroad, remove the battery for varying amounts of time and leaving the computer as long as a day.

  In the absence of a recovery disk, I have no idea how to do to return to the form and would like to receive advice or suggest, keeping in mind I'm not a computer genius (if had'nt you may have guessed). Preferably, without losing my element pictures and videos stored on the hard drive, but it's just preference.

  Thank you, Jay

  Hello

  It does not seem good friend if the Windows operating system does not start even using safe mode, then I don t think you will be able to run the operating system without new OS reinstallation. :(

  To back up data from the HARD drive I recommend that you connect the internal HARD drive to external USB HDD controller and a backup of the HARD drive on another computer.

  Then you could try to reinstall the operating system on your laptop using the Toshiba Recovery CD

  See you soon

• Satellite M30: Blue error screen - how to diagnose what it is?

  I have a hardware problem, but I'm not sure of the exact nature. Even if I look like the hard drive or something to communicate with her.
  About two weeks ago, I started to notice performance problems when loading something from the internal hard drive: overall function of the computer (such as the movement of the mouse, mp3 playback) became embarrassed when the hard drive was loading (economy was less of a problem).

  This was NOT the case when loading data or execution of programs from a disk usb external hard. Today, I got a blue screen informing me that this accident was probably due to new hardware or software, followed by a physical memory dump and a severe judgment. I restarted the computer, but had the same problem after the login screen.

  Trying to boot into safe mode does not work either and after some tests it never got to the login screen more - a few seconds after the beginning of boot there was a flash of a screen blue, followed by an immediate halt.
  In any case, I used the recovery dvd - rom product but the problem is still there, which means that I can start now but I get the same blue screen every hour at least (seems to correlate with usage).

  Instead of running off to buy a new hard drive I want to be sure this is the problem (alone), and not a problem of motherboard or what have you.

  Where my question: how I can diagnose what's wrong with my laptop?

  Hello

  Well, if you n t have no experience in hardware or laptops so it of not easy to locate the fault.
  As jmatthews says you can try to check the Blue error screen. If you google around you will find also information about this error massage.