blue screen, windows keeps closing

Similar Questions

• Continuous blue screens - Windows 7

  Hello, after a stop to as 10 days following using my main pc at home I'm getting blue screens now keep especially when you try to play games.
  The last time I had any blue screen was before the last format that is is, like 7 months ago, the PC has worked perfectly until a few days ago and now give a few difficulties especially when I try to play all the games that I have installed on it, but even if I just surf the net.

  The bluescreens are most of the time reference to 'ntoskrnl.exe' or 'ntfs.sys"at least that's what I read of bluescreensview.

  Here the minidump only files that I have [the latest this morning] more the SysInfo:
  Minidump & sys

  Until now, I just tried to clean registry and put only checked drivers but without results.

  Thanks in advance!

  Driver, checked and linked to your ATI video driver

  Completely, remove the current (or software) driver and install the latest driver available.  For instructions on how to do read everything to update the drivers here http://answers.microsoft.com/en-us/windows/wiki/windows_other-hardware/updating-a-driver/a5e6345e-af9b-4099-bef0-8d22254aa1c1?tm=1436753520149

• Blue screen Windows on my HP ENVY 17, when you watch the movie from Youtube

  Hello!

  Product: HP ENVY 17 Notebook PC

  Operating system: Windows 7, 64 bit

  I got a blue screen Windows today on my HP ENVY 17 laptop, when I was watching a movie from YouTube. Did some work difficult debugging on the dump and found the following (see below). Of course, it's the graphics/video pilot that crashes.

  What I missed in what is the updates?

  Best regards Lennart

  6: kd >! analyze - v
  *******************************************************************************
  *                                                                             *
  * Bugcheck analysis *.
  *                                                                             *
  *******************************************************************************

  VIDEO_TDR_FAILURE (116)
  Try to reset the display driver and recover from timeout failed.
  Arguments:
  Arg1: fffffa800f968010, optional pointer recovery environment internal TDR (TDR_RECOVERY_CONTEXT).
  Arg2: fffff88004e46a48, the pointer in the responsible device driver module (owner tag).
  Arg3: 0000000000000000, optional error (NTSTATUS) of the last operation code failed.
  Arg4: 0000000000000002, optional internal context dependent data.

  Debugging information:
  ------------------

  FAULTING_IP:
  atikmpag + 7 has 48
  fffff880'04e46a48 4883ec28 sub rsp, 28 h

  DEFAULT_BUCKET_ID: GRAPHICS_DRIVER_TDR_FAULT

  BUGCHECK_STR: 0 X 116

  Nom_processus: System

  CURRENT_IRQL: 0

  You can download it from the HP website and install it on the device.

• blue screen - PC keeps freezing upwards and then restarting

  Signature of the problem

  Files helping to describe the problem (some files may be is no longer available)

  Mini091810 - 02.dmp

  SysData. XML

  Version.txt

  Additional information about the problem

  BCCode: 1a

  BCP1: 0000000000005000

  I keep having this problem that my pc keeps freezing and then restart and makes me nuts blue screen appears dumping things then memory dump appears I can't crun my repair for any hope of reason that can help guys

  BCP2: FFFFF70001080010

  BCP3: 0000000001080498

  BCP4: 0000000000014C 48

  OS version: 6_0_6002

  Service Pack: 2_0

  Product: 768_1

  Problem event name: BlueScreen

  The system version: 6.0.6002.2.2.0.768.3

  Locale ID: 2057

  Hello

  To see how to use BlueScreenView and MyEventViewer to troubleshoot the Bluescreens see the
  Methods indicate in this thread - top 3 answers.

  http://social.answers.Microsoft.com/forums/en-us/vistarepair/thread/3deab2fa-4000-4136-8c78-a3d22b1db009

  -------------------------------------------------------------

  Remove ALL power and reinstall all the memory cards and cables (both ends where possible).
  in fact, remove and replace - don't do not just tight. Make sure that the vents are clear and that the
  the fans are working. Even if the temperature is OK assume no heat does not affect the video,.
  sound or other system functions that it these get hot. Try adding a small fan blowing in
  the vents as a test. (These are especially for a PC not a laptop.)

  Have you recently added any hardware? Have you updated any drivers just before this started?
  (Check control panel - updates of Windows to see if all drivers have been updated it on the)
  This started the time) likely guilty hand are video driver, other great drivers, memory, and
  antivirus/antispyware/security products could be at fault as well as reader questions.

  Use the troubleshooter below and refer to the following message to drivers and memory when
  you get these sections and then back to the resolution of the problems according to the needs.

  BCCode: 1a 0x0000001a<-- read="">
  http://www.faultwire.com/solutions-fatal_error/memory-management-0x0000001A-* 1041.html? order = votes

  -------------------------------------------------------------------------

  Look in the Event Viewer to see if something is reported on those.
  http://www.computerperformance.co.UK/Vista/vista_event_viewer.htm

  MyEventViewer - free - a simple alternative in the standard event viewer
  Windows. TIP - Options - Advanced filter allows you to see a time rather
  of the entire file.
  http://www.NirSoft.NET/utils/my_event_viewer.html

  Here are a few ways to possibly fix the blue screen issue. If you could give the blue screen
  info that would help. Such as ITC and 4 others entered at the bottom left. And all others
  error information such as codes of STOP and info like IRQL_NOT_LESS_OR_EQUAL or PAGE_FAULT_IN_NONPAGED_AREA and similar messages.

  As examples:

  BCCode: 116
  BCP1: 87BC9510
  BCP2: 8C013D80
  BCP3: 00000000
  BCP4: 00000002

  or in this format:

  Stop: 0 x 00000000 (oxoooooooo oxoooooooo oxoooooooo oxooooooooo)
  Tcpip.sys - address blocking 0 x 0 00000000 000000000 DateStamp 0 x 000000000

  It is an excellent tool for displaying the blue screen error information

  BlueScreenView scans all your minidump files created during ' blue screen of the.
  death ' crashes and displays information about all accidents of a table.
  Free
  http://www.NirSoft.NET/utils/blue_screen_view.html

  BlueScreens many are caused by drivers of old or damaged, in particular the video drivers
  However, there are other causes.

  You can do mode if necessary safe or the Vista DVD command prompt or
  Options recovery if your system is installed by the manufacturer.

  This tells you how to access the System Recovery Options and/or a Vista DVD
  http://windowshelp.Microsoft.com/Windows/en-us/help/326b756b-1601-435e-99D0-1585439470351033.mspx

  You can try a system restore to a point before the problem started when one exists.

  How to make a Vista system restore
  http://www.Vistax64.com/tutorials/76905-System-Restore-how.html

  -------------------------------------------------------------------------

  Start - type this into the search-> find COMMAND to top box and RIGHT CLICK-
  RUN AS ADMIN

  Enter this at the command prompt - sfc/scannow

  How to analyze the log file entries that the Microsoft Windows Resource Checker (SFC.exe)
  program generates in Windows Vista cbs.log
  http://support.Microsoft.com/kb/928228

  The log can give you the answer if there is a corrupted driver. (Does not work
  tell all possible driver issues).

  Also run CheckDisk, so we cannot exclude as much as possible of the corruption.

  How to run the check disk at startup in Vista
  http://www.Vistax64.com/tutorials/67612-check-disk-Chkdsk.html

  -------------------------------------------------------------------------

  Often drivers up-to-date will help, usually video, sound, network card (NIC), WiFi, part 3
  keyboard and mouse, as well as of other major device drivers.

  Look at the sites of the manufacturer for drivers - and the manufacturer of the device manually.
  http://pcsupport.about.com/od/driverssupport/HT/driverdlmfgr.htm

  How to install a device driver in Vista Device Manager
  http://www.Vistax64.com/tutorials/193584-Device-Manager-install-driver.html

  How to disable automatic driver Installation in Windows Vista - drivers
  http://www.AddictiveTips.com/Windows-Tips/how-to-disable-automatic-driver-installation-in-Windows-Vista/
  http://TechNet.Microsoft.com/en-us/library/cc730606 (WS.10) .aspx

  -------------------------------------------------------------------------

  How to fix BlueScreen (STOP) errors that cause Windows Vista to shut down or restart
  quit unexpectedly
  http://support.Microsoft.com/kb/958233

  Troubleshooting, STOP error blue screen Vista
  http://www.chicagotech.NET/Vista/vistabluescreen.htm

  Understanding and decoding BSOD (blue screen of death) Messages
  http://www.Taranfx.com/blog/?p=692

  Windows - troubleshooting blue screen errors
  http://KB.wisc.edu/page.php?id=7033

  -------------------------------------------------------------------------

  In some cases, it may be necessary.

  The Options or Vista recovery disk Startup Repair

  How to do a startup repair
  http://www.Vistax64.com/tutorials/91467-startup-repair.html

  This tells you how to access the System Recovery Options and/or a Vista DVD
  http://windowshelp.Microsoft.com/Windows/en-us/help/326b756b-1601-435e-99D0-1585439470351033.mspx

  I hope this helps.

  Rob Brown - MS MVP - Windows Desktop Experience: Bike - Mark Twain said it right.

• ProBook 450 - second series of recovery media, blue screens windows 7 (win 8 okay, not the hardware problem)

  I had a new HP probook 450 G1.

  Immediately, I swapped the 750 GB for one SSD drive and tried to install Windows 7 from the recovery media. The operation has failed. Contact HP support, they sent new media.

  I used new media. Windows 7 operating system installed. As soon as I install the drivers, the PC goes in a loop of the blue screen.

  I can install the chipset drivers and wifi. Don't know what the other driver is causing the blue screen. I can also install from the windows media 8, so this isn't a hardware problem - wife hates just windows 8.

  Basically, please either give me a few troubleshooting steps or I'll go back to the PC. I'm NOT insterested in a manual process long to determine which driver is the problem and the recovery download media manually the drivers one... should work.

  After you have reinstalled the original 750 GB hard drive with the replacement media, I managed to an attempt to "recover". So, I decided to sit and try, by the process of elimination, all drivers.

  It turns out that the technology Intel Rapid Storage Technology driver was causing the problem. When I installed everything BUT that, the laptop works very well. Notice that I use a fairly new SSD Crucial of M500. It is quite possible there are other people out there see it. You really need to install the driver of rapid storage technology, it is fast enough - not not even 100% sure what good to give the driver.

  So I gave myself wrong guidance by the initial recovery of defective media. The second group of work recovery media, but the version of the driver intel 12.7.3.1001 does NOT work with the Crucial M500. I checked the Intel site for driver downloads, and it was not clear that they have a newer driver appropriate right now. Maybe someone else can tell?

• Error on blue screen Windows 8

  I just bought HP - M6 1201TX core i7 ENVY, 3 weeks with Windows 8, 64-bit, it's under warranty, while I'm working on my laptop, suddenly, windows 8 error blue screen message for a while and shut down the system. After that, I am unable to turn on my laptop for a while.

  Blue screen error message Windows 8 shows following errors:

  SYSTEM_THREAD_EXCEPTION_NOT_HANDLED

  What can be the problem? is it an a hardware or a software problem?

  Hello shabbir_haider,

  Please take a look at this document, which provides the steps necessary to update your drivers and software with Recovery Manager.  To do this and let me know if this helps solve your problem.

  Good luck!

• Blue screen - Windows 7 Professional 64 bit

  Important security updates issued December 8, 2009 caused my computer to go to a blue screen of death at startup loop.  Once I started an image created December 6, I had no problem unless I have reinstall the update Dec. 8.  Does anyone else have this problem?  I have a motherboard Intel DX38BT standard very with the latest BIOS and processor Quad Core Extreme.  All other software are up to date.

  Hello

  You can try to apply the update manually.

  MS09-072: Cumulative security for Internet Explorer update
  http://support.Microsoft.com/kb/976325

  Make a Restore Point, and if it causes problems you can control panel - Windows updates - bottom left
  Then uninstall it updates installed, or if necessary, use the Restore Point.

  How to create a System Restore Point in Windows 7
  http://www.SevenForums.com/tutorials/697-system-restore-point-create.html

  How to do a system restore in Windows 7
  http://www.SevenForums.com/tutorials/700-system-restore.html

  How to uninstall a Windows Update in Windows 7
  http://www.SevenForums.com/tutorials/24373-Windows-update-uninstall-update.html

  How to hide or restore the updates of Windows hidden in Windows 7
  http://www.SevenForums.com/tutorials/24376-Windows-Update-hide-restore-hidden-updates.html

  If the update will not be installed then something like antivirus/antispyware/security products or
  Maybe an add-on stops, it. You can troubleshoot those or right-click on it and HIDE
  it. There may be a further revision to come if it causes errors for many.

  I hope this helps.

  Rob Brown - Microsoft MVP<- profile="" -="" windows="" expert="" -="" consumer="" :="" bicycle="" -="" mark="" twain="" said="" it="">

• Blue screen Windows XP start STOP: 0x0000000A (0x000000FF, 0x00000000, 0x006CED36, 0x805302F2)

  Guru of any kind

  I turn on my computer, and then after the already loaded windows logo, with the fact that I found a blue screen said
  STOP: 0X0000000A (0X000000FF, 0X00000000, 0X006CED36, 0X805302F2)
  So, what should I do to solve this problem I have a bootable DVD, I could start in DOS now.
  For more details of this symtom.
  1. I installed NOD32 antivirus and use it for 2 days, already update the anti-virus databases, already sweeping the entire system, drive
  2. I found the GET bigger and bigger quarantine folder, so I try to remove (Ctrl + A, Del)
  then NOD32 program to happen does not not but the other program can still use
  can I use the Task Manager to end NOD32 but cannot, it has been protected.
  If I click on start/turn off computer/Turn off shutdown of windows then
  3 after I turn on my computer, then after the already loaded windows logo, with the fact that I found a blue screen said

  STOP: 0X0000000A (0X000000FF, 0X00000000, 0X006CED36, 0X805302F2)

  Thank you very much
  Sabrina C

  Take a look at the section "Error occurs after Windows XP is already installed" of this article in the Microsoft Knowledge base.

  I recommend the boot without failure and then research on the issue.

  To start in Safe Mode, until the small logo of Windows with a progress bar appears, press the F8 key. In the list of options, choose Safe Mode.

  Now that the first troubleshooting step, uninstall ESET NOD32 using the NOD32 removal tool (download the file via a work computer, save it to a USB drive and take it to your affected PC booted without failure).

  Once uninstallation is successful, restart the PC to see if the BSOD persists.

  If the BSOD persists, try to boot mode safe again. Now click on the Start button, select all programs > Accessories > system tools > system restore. Select "Restore my computer to an earlier time" and click Next. Choose a restore point before the installation of ESET NOD32, usually it will be a created restore point automatically named "Installed ESET NOD32 Antivirus" or something similar. After choosing a suitable restore point, click Next. Click Next again to confirm the restore operation.

  If only NOD32 UN-installing the problem you can try to re - install it or contact the ESET Support.

• Blue screen Windows Setup hanging from the message "Setup starts Windows.

  I have a M2n SLI chipset and my computer came stock with vista 64-bit, after losing all the functions of the operating system because of a problem of .net I have tried to restore without result.  I got down to the wire with whiping the drive and now I am trying install Windows XP Pro Service Pack 1 (old drive, still trying to see if an operating system takes in general).  The BIOS Setup to boot from the disk, I get the blue screen of installation of Windows to pop - up and start installing its drivers.  However once he reaches the message 'Setup starts Windows', the screen freezes it for as long as I'm ready to watch it (left for a long period of time and no difference).

  Other cases that I also noticed when I restart my computer it will not even reach the configuration screen rather right at the point where you could normally see "Press any key to boot from CD" I received a message 'FreeDOS' and it hangs there.

  I'm not experienced with computers at all I'm just regurgitating given to me by my roommate who happens to know more information. I hope this isn't a hardware problem as I firmly doubt replacements will be economically feasible for me.  Any help would be greatly appreciated. Thank you.

  Hi scottycms,

  See the link that provides information on the reasons below the slot problem and the resolution for the same: Windows XP does not meet the "Setup is starting Windows XP" Message: http://support.microsoft.com/kb/310760

  With regard to:

  Samhrutha G S - Microsoft technical support.

  Visit our Microsoft answers feedback Forum and let us know what you think.

• Error on blue screen Windows Vista 0x0000007B (0xF79B1524, 0xC0000034, 0x00000000, 0x00000000

  Original title: blue screen * stop: 0x0000007B (0xF79B1524, 0xC0000034, 0 x 00000000, 0x00000000, how should I do for vista

  He says to run CHKDSK /F to check for hard drive corruption. then restart your computer, how can I do

  Hello

  1. when exactly you receive the error message?
  2 have you made any changes to the computer before the show?
  3. are you able to boot to the desktop?

  
  Method 1:

  Step 1: Follow the steps if you are able to boot to the desktop.

  Follow the steps mentioned below:

  (a) click Start; type cmd in the start search.
  (b) right click on cmd.exe and select run as administrator.
  (c) type the following command and press ENTER.

  CHKDSK /F (there is a space between chkdsk and / f)
  Chkdsk /r

   

  Step 2: Follow the steps mentioned above in the Windows recovery environment, if you are not able to boot to the desktop.

  Reference:

  What are the system recovery options in Windows Vista?

  http://Windows.Microsoft.com/en-us/Windows-Vista/what-are-the-system-recovery-options-in-Windows-Vista

  Reference:

  Check a drive for errors:

  http://Windows.Microsoft.com/en-us/Windows-Vista/check-your-hard-disk-for-errors

  Important: Running chkdsk on the drive if bad sectors are found on the disk hard when chkdsk attempts to repair this area if all available on which data can be lost.

   

   Method 2:

  How to fix BlueScreen (STOP) errors that cause Windows Vista to shut down or restart unexpectedly
  http://support.Microsoft.com/kb/958233

   

  Method 3:

  Error message when you start a Windows Vista or Windows 7 computer after changing the mode of the boot drive SATA: "STOP 0x0000007B INACCESSABLE_BOOT_DEVICE".

  http://support.Microsoft.com/kb/922976/en-us?p=1

  Important: this section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, click on the number below to view the article in the Microsoft Knowledge Base:

  http://support.Microsoft.com/kb/322756/

• PLEASE WAIT, BLUE SCREEN, Windows once connected on the new Inspiron 7537 8.1

  Hi, this is my head. I have a new (less a week old) 15 inch 7000 series laptop PC with Windows 8.1 pre-installed by Dell UK.

  A day after use, I start getting a blue screen that just overlap the start screen (and everything what I am trying to access) saying 'Please wait '. I found on-line means to solve the problem with the option than a job or go back to a restore point. For the last 3 days, I had to perform system restores and especially don't want to continue to do every day.

  Notice all the I changed is to install Chrome.

  I use this site http://www.optimizewindows8.net/2014/01/fixing-please-wait-screen-problem-in-windows-8-8-1/ but it seems that this problem is very popular and there is no solution yet.

  Results

  • Method 4: perform a system restore: The only method that works so far goes back to a restore point.
  • Method 1: launch Safe Mode and perform a clean boot n ' not work, same error after reset. So don't go to investigate the item as they were all off the coast.
  • Method 2: fix the filesystem with CFS scan - I have to do this, you do not have media.
  • Method 3: log in using another account - Not tried but as I only have one account. Plus a lot of people is reporting that they must exercise in using this method with taskkill restoreoptin.exe
  • Method 5: stop waiting for updates: When I got my laptop it turned slowly making me think that something has not been installed correctly.
  • Method 6: end task restoreoptin.exe: You need another account to do this. Trying to restoreOptIn.exe /Ramp, I found that it created the screen 'Please wait '.

  I disabled the Sky drive sync'ing as many messages talking about problems of integration with the operating system.

  Before I do the kickoff at the Dell support by phone, does any body knows more about this?

  Go looking around I found that in the "app My Dell' under 'story checkup\System' a critical error the day I received the laptop. I want to completely reinstall my system but I do not have the media, have no idea where to find my windows key. I found something on "download software factory" on the Dell site, but it did not work. What are you supposed to do here.

  Hi Chris.  I don't have any real help to you that I'm sorry to say, but I also encounter the same problem with my new laptop Inspiron 7000.  I tried method 2 and he obtained throughout the analysis of the Sfc at the end without requiring the installation media and get the message: "Windows Resource Protection is not any violation of the integrity.", which was a dead-end too.

  Takes me back 20 years for Windows 2 and all conflicts of dark material that allows us to get then. Windows 8 rhyme with mistake as far as I'm concerned.

• Crash blue screen Windows 7 w / BCCode: 4A

  I get an unexpected blue screen crash from time to time, and any help would be greatly apperciated. Info PC Specs and error attached.  Is there anything else I can provide to help? Again any help would be greatly apperciated.

  Manufacturer: ACER

  Model: ASPIRE V5-471-6473

  Model #: MS2360

  CPU: Intel (r) Core i3 - 2367 M CPU @ 1.40 GHz 1.40 GHz

  GPU: Chipset video Onboard

  Installed memory (RAM): 4.00 GB (3.80 GB usable)

  HARD drive: 500 GB (449 GB usable)

  System type: 64-Bit OS (Win7 Home Premium SP1)

  Signature of the problem:
  Problem event name: BlueScreen
  OS version: 6.1.7601.2.1.0.768.3
  Locale ID: 1033

  More information about the problem:
  BCCode: 4A
  BCP1: 0000000077ADBBAA
  BCP2: 0000000000000002
  BCP3: 0000000000000000
  BCP4: FFFFF88003E49B60
  OS version: 6_1_7601
  Service Pack: 1_0
  Product: 768_1

  Files helping to describe the problem:
  C:\Windows\Minidump\091216-26738-01.dmp
  C:\Users\Owner\AppData\Local\Temp\WER-118264-0.SysData.XML

  Read our privacy statement online:
  http://go.Microsoft.com/fwlink/?LinkId=104288&clcid=0x0409

  If the online privacy statement is not available, please read our offline privacy statement:
  C:\Windows\system32\en-US\erofflps.txt

  Windows
  Problem: To stop unexpectedly
  Files helping to describe the problem:
  091216-26738 - 01.dmp
  SysData. XML
  WERInternalMetadata.xml
  See a temporary copy of these files
  WARNING: If a virus or other security threat caused the problem, open a copy of file can harm your computer.

  Hello

  This error checking to be sure malware is involved not so much see my next response methods to do a thorough check.

  Resolutions of errors (blue screen) stop in Windows 7 - has a section for if you can or cannot start Windows.
  http://Windows.Microsoft.com/en-us/Windows7/resolving-stop-blue-screen-errors-in-Windows-7

  We can analyze the minidumps if you make it available from the OneDrive or another file sharing of sites (such as MediaFire). If you have problems downloading the minidumps copy them on the desktop or the Documents folder and download them from there.

  Adding files to your OneDrive
  http://Windows.Microsoft.com/en-us/Windows-8/getting-started-onedrive-tutorial

  A disk - sharing files and folders and change the permissions
  http://Windows.Microsoft.com/en-us/onedrive/share-file-folder

  ZIP or download the content of the C:\Windows\minidump

  Use OneDrive to upload collected files

  http://social.technet.Microsoft.com/forums/en-us/w7itproui/thread/4fc10639-02dB-4665-993a-08d865088d65

  -----------------------------------------------------------------------------------------------

  Check the memory, BIOS, low level drivers from the chipset, other key device drivers,
  antivirus/antispyware/security programs by using the methods in solving the problems
  link above and those below.

  Be sure to check the hard disk for errors using checkdisk and sfc as shown below.

  Check the system for malware, rootkits software in particular (see methods in a later answer below).

  ----------------

  BCCode: 4A

  BCCode: 4A 0x0000004A<-- read="" this="">
  * 1089.html? = date order http://www.faultwire.com/solutions-fatal_error/IRQL-gt-Zero-at-System-Service-0x0000004A- Bug control 0x4A: IRQL_GT_ZERO_AT_SYSTEM_SERVICE<-- read="" this="">
  https://msdn.Microsoft.com/en-us/library/ff559001%28V=vs.85%29?f=255&MSPPError=-2147217396
  

  ========================================================

  Vista and Windows 7 updated drivers love then here's how update largest. Reference to Vista also applies to Windows 7

  It's my generic how updates of appropriate driver: (updating the video/display driver and BIOS)

  This utility, it is easy see which versions are loaded: run DriverView - see
  Hide Microsoft drivers - updated those without drain in their names. (Also update BIOS and drivers from the chipset.)

  -Free - DriverView utility displays the list of all device drivers currently loaded on your system. For each driver in the list, additional useful information is displayed: load address of the driver, description, version, product name, company that created the driver and more.
  http://www.NirSoft.NET/utils/DriverView.html

  For drivers, visit manufacturer of emergency system and of the manufacturer of the device that are the most common. Control Panel device - graphics card configuration-manager - note the brand and complete model of your graphics driver - double-click - tab - write version information. Now, click the driver update (this can do nothing as MS is far behind the certification of drivers) - then do a right click - Uninstall - REBOOT it will refresh the driver stack.

  Repeat for network - card (NIC), Wifi network, sound, mouse, and keyboard if 3rd party with their own software and drivers and the other main device drivers you have.

  Now go to the website of the manufacturer of system (Dell, HP, Toshiba as examples) (restoration), then site of the manufacturer of the device (Realtek, Intel, Nvidia, ATI, for example) and get their latest versions. (Review of the BIOS, Chipset and software updates on the site of the manufacturer of the system while there).

  Download - SAVE - go to where you put them - right click - RUN AD ADMIN - REBOOT after each installation.

  Always check in the Device Manager - tab drivers version you install actually shows up. This is because some restore drivers before the most recent is installed (particularly that audio drivers) so install a driver - reboot - check that it is installed and repeat if necessary.

  Repeat to the manufacturers - BTW on device at the DO NOT RUN THEIR SCANNER - manually check by model.

  Look at the sites of the manufacturer for drivers - and the manufacturer of the device manually.
  http://pcsupport.about.com/od/driverssupport/HT/driverdlmfgr.htm

  Installation and update of drivers under Windows 7 (updated drivers manually using the methods above is preferable to ensure that the latest drivers from the manufacturer of system and device manufacturers are located)
  http://www.SevenForums.com/tutorials/43216-installing-updating-drivers-7-a.html

  If you update the drivers manually, then it's a good idea to turn off the pilot facilities in Windows updates, that leaves is to Windows Update, but it will not install the drivers who are generally older and cause problems. If updates offers a new driver and then hide it (right click on it), then go get new ones manually if you wish.

  How to stop Windows 7 automatically install drivers
  http://support.Microsoft.com/kb/2500967

  ----------------------------------------------------------------------------------------

  Tests of memory intercept all errors, such as memory do not match (possible even for poles that seem identical) and how faster memory is placed in system behind the slower memory. Also is it better to Exchange also sticks in and out to check for those, even if all the tests of memory do not show a problem.

  To test the RAM here control - run 4 + hours or so.<-- best="">
  www.memtest.org

  For the Windows Memory Diagnostic tool.

  Start - type in the search-> memory box - find top - right click - Memory Diagnostics tool follow RUN AS ADMIN instructions

  Windows Vista: How to scan / test your memory with Windows Vista memory or RAM
  Diagnostic tool
  http://www.shivaranjan.com/2007/11/01/Windows-Vista-how-to-scan-test-your-RAM-or-memory-with-Windows-Vista-memory-diagnostic-tool/

  How to run the diagnostic tool memory in Windows 7
  http://www.SevenForums.com/tutorials/715-memory-diagnostics-tool.html

  I hope this helps.
  --------------------------------------------------------------------------------------------
  Rob Brown - Microsoft MVP<- profile="" -="" windows="" and="" devices="" for="" it :="" bicycle="" -="" mark="" twain="" said="" it="">

• Blue screen Windows 7 32-bit

  I recently started having blue screens on my 32-bit Windows 7 computer.  There is nothing new, other than windows updates.  At first I thought it was the Intel graphics driver which I removed.  Then, I read something on Skype so I removed that.  Always problems.  I have the system dump, but can't see where I can download the dump.  Thanks for any help.

  Associated with the VirtuWDDM.sys LucidInterop Lucidlogix Inc. WDDM driver.

  Remove the driver current completely and install the latest driver available.  For instructions on how to do read everything to update the drivers of my partner JMH3143 http://answers.microsoft.com/en-us/windows/wiki/windows_other-hardware/updating-a-driver/a5e6345e-af9b-4099-bef0-8d22254aa1c1?tm=1436753520149 here

  If you continue to plant I would remove Symantec because it often causes this kind of question

• Blue Screen Windows 7 64 bit

  I get the blue screen on windows 7 64 bit. Can someone tell me what he do to close it from the reference below code?

  Signature of the problem:

  Problem event name: BlueScreen

  OS version: 6.1.7601.2.1.0.256.48

  Locale ID: 1033

  More information about the problem:

  BCCode:                                               a

  BCP1: FFFFFFFA8059E865

  BCP2: 0000000000000002

  BCP3: 0000000000000001

  BCP4: FFFFF80003ABC87A

  OS version: 6_1_7601

  Service Pack: 1_0

  Product:                                               256_1

  Files helping to describe the problem:

  C:\Windows\Minidump\012616-16224-01.dmp

  C:\Users\gmorton\AppData\Local\Temp\WER-96112-0.SysData.XML

  Read our privacy statement online:

   http://go.Microsoft.com/fwlink/?LinkId=104288&clcid=0x0409

  If the online privacy statement is not available, please read our offline privacy statement:

  C:\Windows\system32\en-US\erofflps.txt

  Best regards

  Vishnu

  Hello

  You can also check out this link that talks about troubleshooting stop errors (blue screen) in Windows 7:

  http://Windows.Microsoft.com/en-us/Windows7/resolving-stop-blue-screen-errors-in-Windows-7

• Google Chrome blue screen Windows Shutdown

  I have a problem with Google Chrome works is not on my computer.  When I try to launch Chrome, I get a blue screen and restart the computer.  I tried to reinstall Chrome, but this doesn't seem to help.  This is the nature of the blue screen I get

  The link to the DMP files are here: https://drive.google.com/file/d/0B2oxD0JcXfyQQzlycUZ3NEQwLU0/view?usp=sharing

  Signature of the problem:

  Problem event name: BlueScreen

  OS version: 6.1.7601.2.1.0.256.48

  Locale ID: 1033

  More information about the problem:

  BCCode:                                               7a

  BCP1: FFFFF6FC40008A28

  BCP2: FFFFFFFFC0000185

  BCP3: 0000000022 FEB 860

  BCP4: FFFFF8800114593C

  OS version: 6_1_7601

  Service Pack: 1_0

  Product:                                               256_1

  Files helping to describe the problem:

  C:\Windows\Minidump\112215-26769-01.dmp

  C:\Users\Bryan\AppData\Local\Temp\WER-93038-0.SysData.XML

  Read our privacy statement online:

   http://go.Microsoft.com/fwlink/?LinkId=104288&clcid=0x0409

  If the online privacy statement is not available, please read our offline privacy statement:

  C:\Windows\system32\en-US\erofflps.txt

  These accidents were related to the corruption of memory (probably caused by a driver).

  Run these two tests to check your memory and find which driver is causing the problem.  Launch auditor.  You don't need to run memtest again unless the auditor is not the cause, or you want to.

  If you are overclocking anything reset by default before running these tests.
  In other words STOP! If you don't know what it means that you're probably not  
  
  
  
  
  1-Driver Verifier (for full instructions, see our wiki here)
  
  2-Memtest. (You can learn more about running memtest here)