Blue screen Windows Setup hanging from the message "Setup starts Windows.
I have a M2n SLI chipset and my computer came stock with vista 64-bit, after losing all the functions of the operating system because of a problem of .net I have tried to restore without result. I got down to the wire with whiping the drive and now I am trying install Windows XP Pro Service Pack 1 (old drive, still trying to see if an operating system takes in general). The BIOS Setup to boot from the disk, I get the blue screen of installation of Windows to pop - up and start installing its drivers. However once he reaches the message 'Setup starts Windows', the screen freezes it for as long as I'm ready to watch it (left for a long period of time and no difference).
Other cases that I also noticed when I restart my computer it will not even reach the configuration screen rather right at the point where you could normally see "Press any key to boot from CD" I received a message 'FreeDOS' and it hangs there.
I'm not experienced with computers at all I'm just regurgitating given to me by my roommate who happens to know more information. I hope this isn't a hardware problem as I firmly doubt replacements will be economically feasible for me. Any help would be greatly appreciated. Thank you.
Hi scottycms,
See the link that provides information on the reasons below the slot problem and the resolution for the same: Windows XP does not meet the "Setup is starting Windows XP" Message: http://support.microsoft.com/kb/310760
With regard to:
Samhrutha G S - Microsoft technical support.
Visit our Microsoft answers feedback Forum and let us know what you think.
Tags: Windows
Similar Questions
-
A number of months ago one of our computer got a virus and has gradually become unusable. He started as a kind of spyware, that obviously was not what it seemed. Now, we are to receive a blue screen every time we try to start the computer if I try in safe mode it brings me to the "Administrator" or "name of the wife." When I click on one of these he says it saves the parameters and then returns the same screen. I received what I believe to be the re installation of Dell discs, but now I don't know how to access. Thanks advance!
If you have a Dell recovery disk, put it in the optical drive and restart the computer. As the computer starts, press the F12 key and choose to boot from the optical drive. The restore disc will start and that you follow the instructions.
If you have a true Dell disk operating system, follow the steps above to boot from the disc of the operating system. Here are the links explaining how to do a fresh install of XP. Once your operating system is installed, you will then need to install the drivers for all your hardware. If you have received a genuine Dell OS disk you have too a disc called "Dell Resource CD". This CD has all of the drivers. Put in the drive, install the application, and then install the drivers that are found.
Don't forget to update XP Service Pack 3 and make all Windows updates. Update of the common as programs Adobe Reader, Java, Flash, etc. for the latest versions. Install a good antivirus like NOD32 (commercial), Avast or Avira (free versions available).
http://michaelstevenstech.com/cleanxpinstall.html - Clean install - how-to
http://www.elephantboycomputers.com/page2.html#Reinstalling_Windows - what you will need at handIf you can't do the work yourself (and there is no shame in admitting this isn't your cup of tea), take the machine to a professional computer repair shop (not your local equivalent of BigComputerStore/GeekSquad). MS - MVP - Elephant Boy computers - don't panic!
-
Blue screen to wake up from the sleep and Hibernate in Windows 7
I had this blue error message screen "kernel_data_inpage_error" to wake up from hibernation in wndows 7. I tried to reinstall windows 7, but the problem persists. Please advise the steps to solve this problem.
Hi Zen81,
Thank you for your message.
I suggest to perform a clean boot to see if a startup program may conflict with the RESUME from hibernation/standby state:
Clean boot
http://support.Microsoft.com/kb/929135
If you have no luck with it, you can test your profile for corruption:
http://Windows.Microsoft.com/en-us/Windows7/fix-a-corrupted-user-profile
Chris
Microsoft Answers Support Engineer
Visit our Microsoft answers feedback Forum and let us know what you think. -
Blue screen Windows on my HP ENVY 17, when you watch the movie from Youtube
Hello!
Product: HP ENVY 17 Notebook PC
Operating system: Windows 7, 64 bit
I got a blue screen Windows today on my HP ENVY 17 laptop, when I was watching a movie from YouTube. Did some work difficult debugging on the dump and found the following (see below). Of course, it's the graphics/video pilot that crashes.
What I missed in what is the updates?
Best regards Lennart
6: kd >! analyze - v
*******************************************************************************
* *
* Bugcheck analysis *.
* *
*******************************************************************************VIDEO_TDR_FAILURE (116)
Try to reset the display driver and recover from timeout failed.
Arguments:
Arg1: fffffa800f968010, optional pointer recovery environment internal TDR (TDR_RECOVERY_CONTEXT).
Arg2: fffff88004e46a48, the pointer in the responsible device driver module (owner tag).
Arg3: 0000000000000000, optional error (NTSTATUS) of the last operation code failed.
Arg4: 0000000000000002, optional internal context dependent data.Debugging information:
------------------FAULTING_IP:
atikmpag + 7 has 48
fffff880'04e46a48 4883ec28 sub rsp, 28 hDEFAULT_BUCKET_ID: GRAPHICS_DRIVER_TDR_FAULT
BUGCHECK_STR: 0 X 116
Nom_processus: System
CURRENT_IRQL: 0
You can download it from the HP website and install it on the device.
-
Last night, my laptop that runs windows xp blue screened and says something about the queue
original title: help solve a mistake, please on windows xp
Last night my laptop that runs windows xp blue screened and says something about the queue and to bring the computer out of which I did. I just tried to turn it on an hour ago, I use it now, and I got a message saying he had recovered from a serious error and I wanted to report to microsoft? I clicked Yes, but unbeknownst to me, I had no internet connection at the point of having to re-enter my our Verizon router WEP number in this laptop. I essentially self-taught myself much on computers that tell you, I'm not really computer literate, but if you can point me in the right direction, I can very well do. This is where to ask my question/problem. I went in the event viewer and found this error/explanation: Index information is corrupt and Indexing Service cannot re - index the content automatically. User action: stop and restart the indexing service using the following command:
SC stop cisvc
SC start cisvc
Can someone tell me please how to do this? I think I know, but I'm really not sure so please help... Thank you
It really seems to me as if you had a temporary problem which has now disappeared and that you probably do not need to do anything.
However, please click Start, and then click Printers and faxes and report what, if anything, you see in the window that opens.
If you don't see an icon for the printer that you think should be there, you need to fix this. On the other hand, if your printer icon is there - or if you do not have a printer attached to your computer - you need not do anything.
If you want your computer to be a little faster and at the same time save space on your hard drive, read the LifeHacker article I linked in my previous post. However, you need not to do, and you can erase [probably] regardless of the index corruption has occurred by starting and stopping the Indexing Service (cisvc) by entering commands in a command prompt window that I described.
Yet once, you don't need to change your encryption WEP to WPA or WPA2 wifi, but doing so will make your network more secure wireless. If you want to change your encryption, you would start by changing the configuration of your router from Verizon. You should be able to find detailed instructions on the Verizon support site. I don't know if you have Verizon FiOS or Verizon DSL service; This is a page of relevant support FiOS--> http://www22.verizon.com/ResidentialHelp/FiOSInternet/Networking/Setup/Security/124980.htm
-
Blue screen Crash webcam plugged during the conversation live call video windows
Whenever my webcam is plugged in a conversation in windows live, to allow us to start a video call, it causes my computer crash blue screen and closed.
It did not used to do this, and we do not know why?
We use Vista and the WebCam is a model of Delux from Logitech:
M/N: V-UBG35, V20
I tried uninstalling and re - install the WebCam software, but it makes no difference.
Thank you very much for any help you can give us!
AppleRight
Hi pgard,
1. did you of recent changes on the computer?
2. what software do you use for video conversation?
3. What is the error message that you receive in the blue screen?
It seems the webcam must update software or good version of the driver must be installed.
Check out the links and try the steps mentioned below.
http://forums.Logitech.com/T5/video-chat-applications-non/BSOD-for-notebook-webcam-Deluxe/m-p/68910
http://forums.Logitech.com/T5/webcams/computer-crashes/m-p/118452
If fails it step above, they are checking in the case where the newspaper for the cause of blue screen of death and post back with the details.
What are the information contained in the logs of the event (Event Viewer)?
http://Windows.Microsoft.com/en-us/Windows7/what-information-appears-in-event-logs-Event-Viewer
For additional support, post your request in the forums of Logitech using the link below.
http://forums.Logitech.com/T5/webcams-video-calling/CT-p/webcam_video
I hope this helps!
Halima S - Microsoft technical support.
Visit our Microsoft answers feedback Forum and let us know what you think.
-
has had to reformat my hard drive now when he star0x0000007b (0x78d663c, 0xc0000034, 0x00000000, 0x00000000)
has had to reformat my hard drive, now when I try to reinstall windows xp, I get a blue screen with this code at the end 0x0000007b (0x78d663c, 0xc0000034, 0x00000000, 0x00000000) how to solve this problemHello
I saw the 0x0000007B BSOD caused by trying to install XP on a disk hard while the BIOS is designating the reader as AHCI instead of IDE. XP has no native AHCI drivers, resulting in a stop 7B. Unless the PC had originally Vista or Win 7, but it might be useful to check that it is not likely.
If the BIOS is set to AHCI, you could do one of three things (depending on whether your PC has a floppy drive)...
1 find the Setup F6 disk on AHCI support at installation time (start with the manufacturer's website if you do not already have such a thing). Watch the very hit F6 prompt early in the installation process.
2. change the setting in BIOS on IDE / ATA
3. create a new "slipstreaming" installation disc drivers AHCI in the existing installation disc, see http://www.nliteos.com/index.html
After the back if your BIOS is IDE / ATA
Tricky
-
Get the blue screen when you create a new message or the response message in OWA Exchange 2007
Get the blue screen when you create a new message or the response message in OWA (Exchange 2007)
Hello
I suggest you post the question in the forums and check them off below if it helps:
http://social.technet.Microsoft.com/forums/en-us/exchangesvrclients/
It will be useful.
-
When I opened to develop & load an image from the image after is removed a pale blue screen. If I shared the screen I can see the front of the image but the image after rest as a blue screen. Clues please?
Most likely, LR has problems talking to your video card.
In the Preferences dialog box, tab Performance, disable the use of the GPU.
-
Whole new generation that has been very well,
Mobo: EVGA P55 SLI,
Processor: Intel Core i7 860,
RAM: Mushkin matched 2 X 2 = 4 GB
PS: Blue Antec 750W
GPU: EVGA Nvidia GTX 260 SLI (x 2)
HD' Samsung 750Go (x 2) RAID 1
DVD RW
Blue Ray RW
OS: Vista Edition Home Premium 64-bit
System has been great from the GET go, there are more than 2 weeks. Never a failure to the no boot, no lock ups etc. Woke up in the middle of the night last week with cmptr attempt to restart. No new software or hardware installed had been. Nothing worked, quiet dampened.
From there on, I was not able to start Windows.
I entered the BIOS and tried to start a well known point... nothing. Always get blue screen. I have reset the CMOS on the mobo, removed the battery on the mobo and reinstalled. I unplugged the two hard drives power and SATA cables, bought a NEW (third) HD and installed, with only one new HD connected, with a full version of Windows Vista DVD in the CD/DVD drive, tried to boot Windows from scratch... still get the blue screen?
Blue screen says:
A problem has been detected and Windows has shut down to prevent damage to your computer.
IRQL_NOT_LESS_OR_EQUAL
If this is the first time...
Check that any hardware or software is installed correctly.
technical info:
STOP: 0X0000000A
(0xFFFFFA8D839EFB18),
(0 x 0000000000000002),
(0 x 0000000000000001),
(0xFFFFF8000A481DD2)
I was able to run the memory test and it came back without errors. I was not able to get to "repair your computer", as the beginning is never far away. When the computer reboots, it comes to the sequence: normal mobo beeps (five) than even that when the system was working fine... then I get the graph of the mobo splash screen EVGA P55 SLI,... then black screen with "Windows loading files"... which appears just above the loading bar (it looks like gage fuel fill from left to right).
Once the bar then "fills" Blue Screen of Death!
It's EXTREMELY frustrating because it was built for me by an employee of INTEL (very smart read), all latest drivers etc. Very little software loaded on the system. Most of the aid that I read guess you can operate within Windows already... Catch 22! I can't!
Hello
You get beeps when it worked? This is not normal.
Computer MESSAGE / beep codes
http://www.computerhope.com/beep.htm=======================================
Think that material:
Added new hardware, updated drivers to date (don't forget to check in Control Panel - Windows Updates - pilot
updates), or add key software lately? Pilots and security/antivirus/antispyware products are also likely
suspects. Next message is my generic driver updated methods to use when you get to this section of the
troubleshooter.You can access Mode without fail - repeatedly press F8 as you start - last good configuration or system restore known?
How to make a Vista system restore
http://www.Vistax64.com/tutorials/76905-System-Restore-how.html
Look in the Event Viewer to see if something is reported on these reboots.
http://www.computerperformance.co.UK/Vista/vista_event_viewer.htmBCCode: a
Cause
This bug check is issued if the memory paged (or invalid) is accessible when the IRQL is too high.
The error that usually generates this bug check occurs after the installation of the faulty device driver or service system, BIOS.
If you encounter a bug 0xA control during the upgrade to a later version of Windows, this error can be caused by a device driver, system service, an anti-virus or a backup tool that is not compatible with the new version.
Solve the problem
If a kernel debugger is available, get a stack trace.
To resolve an error caused by the faulty device driver or service system, BIOS
- Restart your computer.
- Press F8 to character-based menu that displays the choice of operating system.
- In the Windows Advanced Options menu, select last known good Configuration . This option is most effective when a pilot or a service is added at a time.
To resolve an error caused by an incompatible device driver, system service, virus scanner, or backup tool
- Check the system log in Event Viewer for error messages that may identify the device or driver that caused the error.
- Try disabling the cache in memory of the BIOS.
- Run the diagnostics of equipment provided by the manufacturer of the system, in particular the scanner memory. For more information about these procedures, see the manual of your computer.
- Make sure that the latest Service Pack is installed.
- If your system has cards (SCSI) small computer system interface, contact the card manufacturer for updated Windows drivers. Try to disable sync negotiation in the SCSI BIOS, check the wiring and the SCSI ID of each device and confirming the proper termination.
- For devices (IDE) peripheral electronic integrated, set the built-in as only primary IDE port. Also, check each IDE device to the right setting master/slave/stand alone. Try to remove all IDE devices except for the hard drives.
If the message appears during installation of Windows, make sure that the computer and installed devices are listed in the list of the products tested Microsoft Windows market.
-------------------------------------------------------------------------
It is my generic troubleshooting tool and can probably give more specific help when you give the ICC codes.
Here are a few ways to possibly fix the blue screen issue. If you could give the info from the blue screen that would be
Help. Such as ITC and 4 others entered at the bottom left. And any other information such as STOP error
codes and info like IRQL_NOT_LESS_OR_EQUAL or PAGE_FAULT_IN_NONPAGED_AREA and similar messages.As examples:
BCCode: 116
BCP1: 87BC9510
BCP2: 8C013D80
BCP3: 00000000
BCP4: 00000002or in this format:
Stop: 0 x 00000000 (oxoooooooo oxoooooooo oxoooooooo oxooooooooo)
Tcpip.sys - address blocking 0 x 0 00000000 000000000 DateStamp 0 x 000000000It is an excellent tool for displaying the blue screen error information
BlueScreenView scans all your minidump files created during 'blue screen of death' crashes, and displays the
information on all accidents of a table - free
http://www.NirSoft.NET/utils/blue_screen_view.htmlBlueScreens many are caused by old or damaged drivers, video drivers in particular, but there are other causes.
You can follow these steps in the Safe Mode if necessary or the command prompt Vista DVD or Options of recovery if your
system installed by the manufacturer.This tells you how to access the System Recovery Options and/or a Vista DVD
http://windowshelp.Microsoft.com/Windows/en-us/help/326b756b-1601-435e-99D0-1585439470351033.mspxYou can try a system restore to a point before the problem started when one exists.
How to make a Vista system restore
http://www.Vistax64.com/tutorials/76905-System-Restore-how.html-------------------------------------------------------------------------
Start - type this in the search box-> find COMMAND at the top and RIGHT CLICK – RUN AS ADMIN
Enter this at the command prompt - sfc/scannow
How to analyze the log file entries that the Microsoft Windows Resource Checker (SFC.exe) program
generates in Windows Vista cbs.log
http://support.Microsoft.com/kb/928228The log can give you the answer if there is a corrupted driver. (Says not all possible driver problems).
Also run CheckDisk, so we cannot exclude as much as possible of the corruption.
How to run the check disk at startup in Vista
http://www.Vistax64.com/tutorials/67612-check-disk-Chkdsk.html-------------------------------------------------------------------------
Often drivers up-to-date will help, usually video, sound, network card (NIC), WiFi, 3rd party keyboard and
smile, as well as of other major device drivers.Look at the sites of the manufacturer for drivers - and the manufacturer of the device manually.
http://pcsupport.about.com/od/driverssupport/HT/driverdlmfgr.htmHow to install a device driver in Vista Device Manager
http://www.Vistax64.com/tutorials/193584-Device-Manager-install-driver.htmlHow to disable automatic driver Installation in Windows Vista - drivers
http://www.AddictiveTips.com/Windows-Tips/how-to-disable-automatic-driver-installation-in-Windows-Vista/
http://TechNet.Microsoft.com/en-us/library/cc730606 (WS.10) .aspx-------------------------------------------------------------------------
How to fix BlueScreen (STOP) errors that cause Windows Vista to shut down or restart unexpectedly
http://support.Microsoft.com/kb/958233Troubleshooting, STOP error blue screen Vista
http://www.chicagotech.NET/Vista/vistabluescreen.htmUnderstanding and decoding BSOD (blue screen of death) Messages
http://www.Taranfx.com/blog/?p=692Windows - troubleshooting blue screen errors
http://KB.wisc.edu/page.php?id=7033-------------------------------------------------------------------------
In some cases, it may be necessary.
The Options or Vista recovery disk Startup Repair
How to do a startup repair
http://www.Vistax64.com/tutorials/91467-startup-repair.htmlThis tells you how to access the System Recovery Options and/or a Vista DVD
http://windowshelp.Microsoft.com/Windows/en-us/help/326b756b-1601-435e-99D0-1585439470351033.mspxI hope this helps.
Rob - bicycle - Mark Twain said it is good. -
I don't know when the downloaded update, the computer has been restarted on September 10, 2010 to install updates. Shortlyl once the computer is restarted, I got the blue screen of death. with the details of error like:
Stop 0 x 000000050 (0 x 000000000000000, 0xFFFFF88001DCAE4, 0xFFFFF8A00B490027, 0 x 00000000000002) do not know if the number of zeros is exactly right in one of those, but it's super frustrating.
I tried to restart my computer in repair as recommended (get blue screen of death), I tried to reboot normally, loop just restart procedures asking if I want to restart in repair mode. I tried SafeMode (BSOD), I tried to restart with last working restart (restart loops), I tried to choose the "Computer repair" BSOD I tried a diagnosis and all past.
Help!
Thank you.
So yes actually hear nothing helped me. Seems that, given that the computer is not stopped correctly and my hard drive was not recognized there starting the cycle upward or give me the BSOD. Put it in my Ubuntu CD spare which I've had since my last PC hard drive became corrupt and force back across my hard drive. After doing this, I was able to do a boot repair, who led for the BSOD. Not sure how that actually fixed, lost about 10 hours of my day. So I guess I can chalk up to Microsoft and a reminder on why I should buy Mac for now on... an update shouldn't really cause such problems.
I get that not everyone has the same PC, so it is difficult to tell if an update is bad, but he should not do this and if an update is the cause of a certain segment of consumers who are updating must be taken down for everyone, or at least the users with the configuration that is known to have problems with an update.
Problem is solved, had to go back to a previous version of good boot where I have not install updates again. Now, I'm trying to understand who was was bad, so I can leave my computer knows to ignore.
Nice day.
Just in case someone needs to know how to use Ubuntu to back up files on their PC that does not load windows, please see the link below:
-
Common blue screen that's happened in the last 2 months
Hi everyone, I would ask you to help solve my PC frequently in the blue screen before 2 months after the release of Windows installed. I tried recovery my PC but still not after having re-installed the update of Windows. I also tried to recover my PC and then install only the updates of Windows before 2014. The blue screen comes up again. What you can do now & how to solve?
You can find the minidump via this link info
https://onedrive.live.com/redir?RESID=76E7A2707D4C9F06! 704 & authkey =! AKyONMJODMwxiqY & ithint = the file % 2cdmp
Many thanks for your time and your help.
Best wishes
Tony
Error message after restarting the PC *.
Signature of the problem:
Problem event name: BlueScreen
OS version: 6.1.7601.2.1.0.768.3
Locale ID: 4105More information about the problem:
BCCode: a
BCP1: 0000000000000048
BCP2: 0000000000000002
BCP3: 0000000000000001
BCP4: FFFFF8000313F34F
OS version: 6_1_7601
Service Pack: 1_0
Product: 768_1Files helping to describe the problem:
C:\Windows\Minidump\112814-65582-01.dmp
C:\Users\Miu-Fujitsu\AppData\Local\Temp\WER-198370-0.SysData.XMLTony
You have installed F-Secure!
Please download and install the update of security for Windows 7 for x 64-based systems (KB2961072):
http://www.Microsoft.com/en-GB/download/details.aspx?ID=43452 -
I had trouble with the fans so I unplugged everything, pulled out the memory and put it in. Shortly after received warning on a stop. I've updated the bios and things worked fine for one night. The following day I uninstaaled some programs and blue rebooted and got the screen again. I can right through the blue screen and sign, but have to stop with button / stop.
Hello
What is the exact error message on blue screen?
This error message can point to a hardware or software that causes this problem. If the computer restarts after the Blue error screen, disable the automatic system failure restart option allows to capture the error message on blue screen.
Check if the problem persists in safe mode and after the same return.
-
Why do I get the blue screen of DEATH most of the time when I try to print on my HP Office Jet printer? Almost everytime I try to print to the printer HP Office Jet m I get the Blue Screen of Death in the middle of printing or shortly after that my document is printed. I then have to shut down my computer and restart it. I am running Windows 7.
We need the log files themselves (called a DMP files) because they contain the only record of the sequence of events that led to the accident, what drivers have been loaded, and what has been loaded.
Please follow our instructions to find and download the files, we need to help you fix your computer. They can be found at hereIf you have any questions regarding the procedure, please ask
-
Error on blue screen Windows 7 x 86
Hello, I had a lot of problems with my laptop. The technical support guy said that my HD was done, so he sold me a new one, with Windows 7 x 86 (before I had the x 64), and my cell phone was OK for a while.
During this time, I had some blue screen errors. But after the new HD, it never happened again.
Unfortunately, this week it happened once more. I have the file Minidump here: https://onedrive.live.com/embed?cid=71AB5696D74B2AD5&resid=71AB5696D74B2AD5%21828&authkey=AEmmwpsHL2INHV
and here: https://mega.co.nz/#! sV4QBQDJ! H9gnSuJZBXtv9EvcSFD8eSS0eHybE1_BfqD7l5BjBOo
What is the problem? How can I solve it?
Please, help me.
Thanks in advance.
Hello and good morning (morning here in New York!) :)
BAD_POOL_HEADER (19)
This indicates that a pool header is corrupt.
Error checking 19, {3, 957f5490, 0, 957f5490}
0: kd > k
ChildEBP RetAddr
80f68798 988cb868 nt! ExAllocatePoolWithTag + 0 x 664
80f687ac 988d9e73 win32k! Win32AllocPool + 0 x 13
80f687c0 988d9e27 win32k! AllocThreadBufferWithTag + 0x1e
80f687d0 988da101 win32k! AllocFreeTmpBuffer + 0x2d
80f687f0 988dacfa win32k! ESTROBJ::vInit + 0xcb
80f68b38 9884af67 win32k! GreExtTextOutWLocked + 0x62f
80f68bb4 988afb07 win32k! GreBatchTextOut + 0x1e6
80f68d24 8304a73c win32k! NtGdiFlushUserBatch + 0 x 123
80f68d34 77a164f4 nt! KiFastCallEntry + 0xcc
WARNING: Frame IP not in any known module. Sequence of images may be wrong.
80f68d38 badb0d00 0x77a164f4
80f68d3c 0024ead8 0xbadb0d00
80f68d40 0x24ead8 00000000It seems that the pool freelist is corrupted (caused by a driver left 3rd, probably).
---------------------------------
1. remove and replace avast! with Microsoft Security Essentials for purposes of troubleshooting temporary as it is likely to cause conflicts:
avast! removal - http://www.avast.com/uninstall-utility
MSE - http://Windows.Microsoft.com/en-us/Windows/Security-Essentials-download
2 in your list of drivers loaded, dtsoftbus01.sys figure who is the driver for Daemon Tools. Daemon Tools is a very popular cause of BSOD in 7/8 base systems. Please uninstall Daemon Tools. Alternative imaging programs are: MagicISO, Power ISO, etc.
Kind regards
Patrick
Maybe you are looking for
-
Others become the iTunes update server message connection failed?
Others become the iTunes update server message connection failed? My iPad has the logo of iTunes with the load icon and cannot update or restore on computer at home. All internet connections are very good.
-
IWorks is included when I switch to El Capitan?
I've recently upgraded to El Capitan and was expecting to see the numbers, Pages and included Keynotes. Are the following are not part of the upgrade?
-
Jet laser HP m1005 mfp Scan to PDF
Dear Sirs, Please let me know how to scan the document in PDF format in laser jet m1005 mfp hp Kone
-
Re: CD/DVD does not not on Satelite A100
HelloWhen I insert a cd/dvd in my satellite A100 makes spinning sounds so "thunk", turns the thunks, once again and never really eventually do anything. When I check in my computer to the DVD/CD-RW drive (d) it does not record that there is something
-
How can I downloaded an app that is not in the App Store
Different is an application that I found on the internet that is not in the App Store. But whenever I try to download... .it does not work... How can I download this app