Bluetooth stereo headset and Skype - have to switch manually to sound card

Similar Questions

• Cannot install the drivers for Motorola S10 - HD Bluetooth Stereo Headset for Windows 7.

  Original title: Motorola S10 - HD Bluetooth Stereo Headset

  The Motorola S10 - HR can be made to be compatible with Windows 7?  I have a dell InspironN7110 and it does not recognize the headset.  I found a site, Broadcom.com who says they have a driver that you can download for compatibility.

  Someone at - it advice?  Someone at - he heard of this site?  Or someone at - there no alternatives?

  Thank you

  In accordance with my previous answer, it seems that no matter what Windows 7 which is / will use the built-in Microsoft Bluetooth protocol, does not have any "audio" to Bluetooth signals.

  You probably need to replace the Bluetooth "pilot" / "radio (dongles)" in order to use the drivers from other companies such as Toshiba and Broadcom.

• How to get the stereo mix on the Satellite P500 with Conexant - SOLUTION sound card

  Hello people...
  I'll write here what it takes to run the 'stereo mix' on a laptop computer equipped with a sound card Conexant.
  I ran this feature on my laptop Satelilite P500
  to run this function, you need drivers nr. 4.111.0.62
  These drivers can be downloaded from the Lenovo Web site,
  These are the drivers of Lenovo G555 model IN2AUD25WW5.exe
  http://consumersupport.Lenovo.com/UK/en/DriversDownloads/drivers_list.aspx?CategoryID=150169
  Unzip the IN2AUD25WW5.exe file using winrar or 7zip
  next step is to find in the file "W7-64" or "W7 - 32""NELCC2wa.inf" ".
  Open the file "NELCC2wa.inf" in the "notebook" and add the ENTRY under Conexant.NTamd64.6.0]---> > vista
  or Conexant.NTamd64.6.1]---> > 7

  ENTRY
  %HdAudioFunctionDriver.Pebble5071.DeviceDesc% = HdAudModelNELA0V, HDAUDIO\FUNC_01 & VEN_14F1 & DEV_5067 & SUBSYS_1179FFD4

  This entry its hardware id. Can be found in Device Manager
  After the entry, save and close the file "NELCC2wa.inf".
  next step is to update the driver in Device Manager
  in the Device Manager find the entry 'Conexant '.
  Right click and select "update driver".
  then you select "installation of a list or a specific location" or let me choose from a floppy disk

  and point to the location where you saved the unzipped and outdated file 'NELCC2wa.inf '.
  After this start of the computer, update the driver
  If all goes well, after installation, you should find the 'stereo mix' in the sounds of parameters
  Take advantage of...
  PS. It also works with XP 32 and 64-bit using driver 3.97.0.0 Lenovo

  Post edited by: olo320i_1

  Post edited by: olo320i_1

  Hi mate

  Thanks a lot for this short statement.

  One of my friends had the same problem on because the stereo mix was not available on the sound chip Contexant.
  Perhaps this info could be useful

  Once again; Well done!

• Need driver for LG HBS 700 bluetooth stereo headset

  I can't find a driver for headset stereo bluetooth LG HBS 700.  I have a Rocketfish Bluetooth micro adapter that works very well, the headphones works fine on my cell phone Samsung Galaxy, but I want it to work on my HP Pavilion or on my HP mini 210 Netbook computer (both running windows 7). I continue to receive messages that the driver is not found, have not installed correctly, and the driver is not found when searching on the internet from the troubleshooter.

  Ah.  The mention of Rocketfish and confusion on my part is due to not paying attention to who's announcement. :)  The original poster mentioned Rocketfish.

  Well, now that I know it's a Dell Wireless 355 Bluetooth Module, I can make a few assumptions a bit-more-edumacated. XD so here is what we have...

  The Dell module is based on a chipset Broadcom (yay!) with custom Dell (Gak!) controllers.  I have all the solid answers for this one because of that. :(

  The steps I take:
  1: remove/uninstall/delete (NOT disable!) all the objects of Bluetooth of the installed software and to start Device Manager.  Reboot - only - after all is removed, since it should try to reinstall on reboot.

  2: allow drivers to Microsoft install.  Reboot only if necessary.

  3: test with Dell drivers.  If this does not work, you need to return to step 1 and start again, end-to-end it is preferable to use Dell in this case, if it works.
  3.1 - Installing Dell drivers.
  3.2 - if requested reboot.
  3.3 - follow pairing instructions below.
  3.4 - if it worked, the Audio playback value for appropriating the Bluetooth device and enjoy.  Remember that YOU can NOT REGISTER BLUETOOTH when the AUDIO of HIGH QUALITY IS USED!
  3.5 - if it doesn't work, go back to step 1 and pass all elements of step 3.

  4: without HAVING to install Dell drivers, only the drivers MS and active Bluetooth device, install the Broadcom drivers.
  4.1 - restart if necessary.
  4.2 - follow pairing instructions below.
  4.3 - if it worked, the Audio playback value for appropriating the Bluetooth device and enjoy.  Remember that YOU can NOT REGISTER BLUETOOTH when the AUDIO of HIGH QUALITY IS USED!
  4.4 - if it does not, try to avoid more stupid hair pulling a small phone may work perfectly in a powerful computer of the fights with Bluetooth.

  Twinning:
  -Start Bluetooth Places and start searching for devices with the headset POWER off.
  -Hold the call button while turning headset and continue to hold until the headset in pairing mode.
  -Look at the computer screen and hope it appears.
  -If/when it comes, pair and connect.
  -Cross your fingers and hope that sink Audio is one of the defined profiles.  If a single headset/hands-free are presented, or if it gives an error/can ' t-find-pilot/blows upward with a small pop *, so it did not work.  (* Should not explode.  If so, send me some photos. XD)

  I'll keep my fingers crossed for you.

• sx-907 Bluetooth stereo headset

  I bought a stereo headset bluetooth SX-907, unfortunately there is no manufacturer information listed. I use an Acer Aspire laptop with 8 64-bit Windows OS. I have the bluetooth for acer preinstalled software. I can't recognize the helmet of the computer. I put the helmet on the scan, but nothing. What I am doing wrong?

  Michael

  Hello

  Try the steps in the link:

  http://Windows.Microsoft.com/en-in/Windows-Vista/troubleshoot-problems-with-Bluetooth-enabled-devices

  http://superuser.com/questions/494627/Bluetooth-doesn ' t-work

• Periphial need installed drivers for Bluetooth stereo headset model #XVTHB100

  Periphial need drivers installed for XVTHB100 # for my HP Pavilion dv6 - 6033cl Entertainment PC Bluetooth stereo headphones model

  Jamie

  Have you tried the helmet manufacturer vizio?

• computer will restart during the call on Skype after putting in the new sound card

  I have Windows XP.  I had a squeal into my microphone.  I put a new sound card on of Sarbent.  Now I have his real good, but when I try to call someone on Skype the computer will restart.

  Hi BobPrkn,

  Follow these methods.

  Method 1: Uninstall and reinstall the Skype app.

  How to change or remove a program in Windows XP

  http://support.Microsoft.com/kb/307895

  Method 2: Perform a clean boot to see if there is a conflict of software like the clean boot helps eliminate software conflicts.

  How to configure Windows XP to start in a "clean boot" State

  http://support.Microsoft.com/kb/310353

  Note: After completing the steps in the clean boot troubleshooting, follow the section How to configure Windows to use a Normal startup state of the link to return the computer to a Normal startupmode.

  After the clean boot used to resolve the problem, you can follow these steps to configure Windows XP to start normally.

  (a) click Start, run.

  (b) type msconfigand click OK.

  (c) the System Configuration Utility dialog box appears.

  (d) click the general tab, click Normal startup - load all services and device drivers and then click OK.

  (e) when you are prompted, click restart to restart the computer.

  Method 3: Update the latest sound/chipset drivers.

  How to manage devices in Windows XP

• Unable to connect bluetooth Stereo Headset for Vista SP2

  Hello

  I use HP Pavilion DV6000 with integrated bluetooth module

  also I got also an A2DP bluetooth car kit in my car I used as stereo bluetooth several times with my cell phone and other portable

  but I don't have to connect it with my HP pavilion computer even if it is paired and recognized BUT received no CONNECT in the right click menu or properties

  the difference of ONLY between my laptop or other computer, tried s than mine recently upgraded to the Vista SP2

  tried the http://support.microsoft.com/kb/970408 update, but did not help

  Need your help

  Thank you

  UPDATE!

  Well, looks like I found a work around for this problem... It seems that the problem may be how some protocols are initialized.

  What has been done differently:
  Firstly, I uninstalled the software of Broadcome of the control panel without removing the installed bluetooth drivers. Go into the Device Manager, I have disabled the Microsoft Bluetooth Enumerator, and THEN proceeded to reinstall the Broadcom (6.3.0.200) software. During the installation I noticed a few differences, such as additional steps in the installation and new options being installed just to do this step.
  Stereo works! :
  Work with my bluetooth device with the disabled enumerator however resulted in matching errors and the connection of my headphones to the audio gateway. Then I enabled it, then connected using the shortcut placed on my desk and instantly had stereo bluetooth.
  The solution for MY problem:
  After disconnection and reconnection, it would not pair in stereo, so I worked around this by disabling the enumerator, reactivation, and then you reconnect. Stereo audio worked properly...
  Hope this helps all users as well as the Microsoft team to find something to prevent users from having to implement this step.
  Thank you!

• MSN NBC articles are empty on the site and I have to switch to Internet Explorer.

  MSN.com has a series of windows to article passing. When I select that indicates (in the upper left corner) is a NBC article, the page is black. I don't have this problem with Internet Explorer or Safari.

  You can try the following steps in case of problems with web pages:

  You can reload webpages and ignore the cache to refresh potentially stale or corrupt.

  • Hold down the SHIFT key and click the Reload button
  • Press 'Ctrl + F5' or 'Ctrl + Shift + R' (Windows, Linux)
  • Press 'Command + shift + R' (Mac)

  Clear the cache and cookies only from Web sites that are causing problems.

  "Clear the Cache":

  • Firefox/tools > Options > advanced > network > content caching Web: 'clear now '.

  'Delete Cookies' sites causing problems:

  • Firefox/tools > Options > privacy > Cookies: "show the Cookies".

  Start Firefox in Safe Mode to check if one of the extensions (Firefox/tools > Modules > Extensions) or if hardware acceleration is the cause of the problem (switch to the DEFAULT theme: Firefox/tools > Modules > appearance).

  • Do NOT click on the reset button on the startup window Mode without failure.
  • https://support.Mozilla.org/KB/safe+mode
  • https://support.Mozilla.org/KB/troubleshooting+extensions+and+themes

• CIT 400 Skype Phone not working do not since Microsoft and Skype have gathered.

  While I use my Skype on my moblie phone and my PC and my ID number can be set to display when calling Skype.

  The Linksys CIT 400 don't is not updated to the other Skype info contacts changes I make on my PC or mobile phone.

  I tried a re - reg handset, turn off (disconnected and removed batteries) on the base and the handset.

  I wonder if I'm wasting my time.

  Although I love the Linksys technical support products has ALWAYS disappointed me for 12 to 13 years that I have owned their products.

  Well, my rants was a bit pointless, but after 3 hours. to understand what was going on, I had to evacuate.

  With the tech support wants to help or even offer a web page that might help me a little without coughing up $29.

  And then to say that there is no guarantee that they could help, is crazy!

  Four things were observing the CIT 400 to work.

  1) cat 5 cable, I use 7 years seems to be insufficient for the link between the WRT AC 1900 and the CIT 400.

  Even if the Contacts and the amounts updated. I replaced it with a 6th cat, now I can talk again.

  2) get Skype and Microsoft to link my accounts took forever.

  3) then waitng for days to get my phone number verified, both at Microsoft and Skpye.

  4) then to have to do the round and round to activate my ID display when you call cell phones and land lines, no kidding, I did several times for three days.

  So in short, everything is as it should be, and works again as he's 7 years old.

• Several times (not all the time) when I disconnect my lap top and then plug it back, the computer crashes and I have to restart manually.

  I called Dell a few weeks ago.  They had me remove the battery, press the power button 15 X and then restart.  They did a scan of material and said that everything was going well.  I ran once again virus scan software, and there is no virus.  I deleted all temporary files.  They said that perhaps, it might be a problem of software somewhere but wanted a ridiculous just to check amount only.  Do I have other options as to how can I fix?  This is a NEW computer that I just received in August!

  Hello

  What antivirus/antispyware/security products do you have on the machine? Be one you ALREADY had on this
  machine, including those you have uninstalled (they leave leftovers behind which can cause strange problems).

  Follow these steps to remove corruption and missing/damaged file system repair or replacement.

  Run DiskCleanup - start - all programs - Accessories - System Tools - Disk Cleanup

  Start - type in the search box - find command top - RIGHT CLICK – RUN AS ADMIN

  sfc/scannow

  How to analyze the log file entries that the Microsoft Windows Resource Checker (SFC.exe) program
  generates in Windows Vista cbs.log
  http://support.Microsoft.com/kb/928228

  Then, run checkdisk - schedule it to run at next boot, then apply OK your way out, then restart.

  How to run the check disk at startup in Vista
  http://www.Vistax64.com/tutorials/67612-check-disk-Chkdsk.html

  ---------------------------------------------------------------------------------------

  How to troubleshoot a problem by performing a clean boot in Windows Vista
  http://support.Microsoft.com/kb/929135
  How to troubleshoot performance issues in Windows Vista
  http://support.Microsoft.com/kb/950685

  Optimize the performance of Microsoft Windows Vista
  http://support.Microsoft.com/kb/959062
  To see everything that is in charge of startup - wait a few minutes without doing anything - then right click on the task - bar
  The task manager - take a look at stored by - Services - process - it is a quick reference (if you have
  a small box in the lower-left - show for all users can check only).

  How to check and change Vista startup programs
  http://www.Vistax64.com/tutorials/79612-startup-programs-enable-disable.html

  A quick check to see that load method 2 is - using MSCONFIG and then display a list of the people here.
  --------------------------------------------------------------------

  Tools that should help you:

  Process Explorer - free - find out what are the files, registry keys and other objects processes have opened, the dll
  they loaded and much more. This exceptionally effective utility will show you even owned by each process.
  http://TechNet.Microsoft.com/en-us/Sysinternals/bb896653.aspx

  Autoruns - free - see what programs are configured to startup automatically when your system boots and you
  opening of session. Autoruns also shows you the full list of registry and file locations where applications can configure auto-
  start the settings.
  http://TechNet.Microsoft.com/en-us/sysinternals/bb963902.aspx
  Process Monitor - Free - monitor the system files, registry, process, thread and DLL real-time activity.
  http://TechNet.Microsoft.com/en-us/Sysinternals/bb896645.aspx

  There are many excellent free tools from Sysinternals
  http://TechNet.Microsoft.com/en-us/Sysinternals/default.aspx

  WhatsInStartUP - free - this utility displays the list of all applications that are loaded automatically when Windows
  starts. For each request, the following information is displayed: Startup Type (registry/Startup folder).
  The command - line String, product name, file Version, company name, location in the registry or the file system,
  and much more. It allows you to easily disable or remove unwanted programs that runs in your Windows startup.
  http://www.NirSoft.NET/utils/what_run_in_startup.html

  There are many excellent free tools to NirSoft
  http://www.NirSoft.NET/utils/index.html

  Window Watcher - free - do you know what is running on your computer? Maybe not. The window Watcher says it all, reporting of any window created by all running programs, if the window is visible or not.
  http://www.KarenWare.com/PowerTools/ptwinwatch.asp

  Many excellent free tools and an excellent newsletter at Karenware
  http://www.KarenWare.com/

  ===========================================

  Vista and Windows 7 the love of the updated drivers that can drastically affect the performance so I would update the main
  drivers.

  This is my generic how updates of appropriate driver:

  This utility, it is easy see which versions are loaded:

  -Free - DriverView utility displays the list of all device drivers currently loaded on your system. For
  each driver in the list, additional useful information is displayed: load address of the driver, description,.
  version, product name, company that created the driver and more.
  http://www.NirSoft.NET/utils/DriverView.html

  For drivers, visit manufacturer of emergency system and of the manufacturer of the device that are the most common.
  Control Panel - Device Manager - Display Adapter - note the brand and complete model of your
  video card - double - tab of the driver - write version information. Now click on UPdate Driver (this
  cannot do anything as MS is far behind the certification of drivers) - then do a right click - Uninstall - REBOOT
  This will refresh the driver stack.

  Repeat this for network - card (NIC), Wifi network, sound, mouse, and keyboard if 3rd party with their
  own the software and drivers and all other main drivers that you have.

  Now go to the site of the manufacturer of system (Dell, HP, Toshiba as examples) (restoration) and then of the manufacturer of the device
  (Realtek, Intel, Nvidia, ATI, for example) and get their latest versions. (Look for the BIOS, Chipset and software)
  updates on the site of the manufacturer of the system here.)

  Download - SAVE - go to where you put them - right click - RUN AD ADMIN - REBOOT after each installation.

  Always check in the Device Manager - tab drivers version you install actually shows up. This
  because some restore drivers before the most recent is installed (particularly that audio drivers) so install a
  pilot - reboot - check that it is installed and repeat if necessary.

  Repeat to the manufacturers - BTW on device at the DO NOT RUN THEIR SCANNER - manually check by model.

  Look at the sites of the manufacturer for drivers - and the manufacturer of the device manually.
  http://pcsupport.about.com/od/driverssupport/HT/driverdlmfgr.htm

  How to install a device driver in Vista Device Manager
  http://www.Vistax64.com/tutorials/193584-Device-Manager-install-driver.html

  If you update the drivers manually, then it's a good idea to disable the facilities of driver in the Windows updates,
  This leaves ONE of Windows updates, but it will not install the drivers who are generally older and cause
  questions. If updates offers a new driver and then hide it (right click on it) and then go look for new ones
  manually if you wish.

  How to disable automatic driver Installation in Windows Vista - drivers
  http://www.AddictiveTips.com/Windows-Tips/how-to-disable-automatic-driver-installation-in-Windows-Vista/
  http://TechNet.Microsoft.com/en-us/library/cc730606 (WS.10) .aspx

  Hope these helps.

  Rob - bicycle - Mark Twain said it is good.

• Hello, I downloaded 7 Adobe photoshop elements and I have trouble downloading pictures to a card reader

  Hello, I downloaded Adobe photoshop elements 7 and I'm having trouble to download new pictures from a card reader. Any suggestonS?

  When try to download, player, this message appears - unable to get thumbnails of the device. The device is not connected or is busy. Unable to get the pictures from the camera. The device is not connected or is busy

• When I close FF it runs always when I look in the XP Task Manager and I have to finish manually until I can reopen it FF. What can I do to fix this?

  I use Win XP Pro
  I think it started after my last FF update

  Something needs to be keeping Firefox from closing properly.

  https://support.mozilla.com/en-US/kb/Firefox%20hangs - See hang-to-output

• Is integrated audio (Audio envy;) Beats Audio) good, or do I have to upgrade to a sound card?

  I am considering a desktop HP Envy Phoenix 810-130qe computer. not a gamer, but as the music & videos. Is the integrated audio quality?

  Haaa, welcome to the forum.

  I can't answer the question of personal knowledge, but I had several HP computers, none is as beautiful as this one.  I'm a musician who is very picky with how the music on my computer sounds.  I've never used anything sound integrated.  I use 12-year old Polk Audio loudspeakers with my h8 1228 and they sound very good.  My next speakers will be speakers Bose computer USB.  They provide their own power.  They are quite expensive, but worth it.

  Please click on "BRAVO", if I helped you and click on "Accept as Solution" If your problem is resolved.

• I get an error "" device cannot start (10) "" when I try to connect the stereo headset bluetooth Motorola SF600.

  I tried to pair my new Motorola SF600 bluetooth stereo headset so I could listen to and control Windows Media Player with my helmet. When I matched the device with the Microsoft Bluetooth driver has been installed, the service of the helmet was not available and troubleshoot message recommended that I upgrade to the Broadcom Widcomm driver. I followed all the instructions, downloaded the latest Widcomm driver and installed. Then I restarted the computer. I could see the Bluetooth icon in the taskbar, but it was red and not white (or blue). When I clicked it, it just says adapter lights up, I did. As soon as I hit this button, the bluetooth icon disappears and no bluetooth connection is possible. When I look in the bluetooth properties and the properties of the driver, I see the message "device cannot start (10). I searched all over the web a possible solution and the closest thing, I found was a fix article talking about a fix for bluetooth adapters that cannot start. I asked the fix and tried to apply it, but whenever I try to run it, it gives the message that it is not applicable to my computer. I wish you a few recommendations for how to fix this. Please let me know if you need more information about the devices or anything else. Bluetooth dongle is a mini Logitech BT which came bundled with the combo keyboard and mouse MX-5000. He is old enough, but he gave me always excellent service under Windows XP.

  Thank you.

  Dan

  Original title: Win7 won't let dongle BT start with the latest Broadcom Widcomm driver

  Thanks for the advice, but I came to the conclusion that Windows 7 does not support the advanced features of this particular Logitech Bluetooth adapter. Windows XP takes to load them entirely, but for some reason any Windows 7 isn't. From Logitech Web site States expressly that the Bluetooth adapter supplied with my keyboard and mouse will not support anything other than a mouse and a keyboard, which is unfortunate. I don't know why, but there you have it. I'm giving up now.