BMP180 in configurations multi master i2c uses I2CCombinedMessage for get-temp-and-pressure operations
I noticed that, thanks to the I2CCombinedMessage it is possible to support the multi-master configurations, as a combined message is treated as a transaction, a single bus, where a rather lengthy communication with a slave i2c (as request of get-temp - pressure and designed by BOSCH for the BMP180 complex) is protected from interference by other masters of the bus. Great!
But looking at fact sheet BMP180 of BOSCH, it turns out the I2CCombinedMessage is not a suitable driver for this particular problem, because the appliance rather lenthy delay between the command and reading - and the JavaDocs of the I2CCombinedMessage does not help on adding breaks in the recorded transaction.
Therefore, it would be great if I2CCombinedMessage would have a .pause(long milliseconds) method.
Is there something like that planned for a future release, or I have to go with the methods begin() and end() distinct (which is of course a workaround)?
Hi Marcus!
No,. pause() isn't in the plan for the near future. And Yes, begin () /end () workaround
/ Sergey
Tags: Java
Similar Questions
-
I haven't used itunes for some time and now have a new PC. I've updated my account (change password) but when I connect to my music went? I am working on Win 8 and still have part of my collection on an ipod.
Unless you subscribe to iTunes game (which is not a complete solution anyway) your iTunes Library is on your previous PC - solution the easiest is to copy from here or from a backup. For more information, see How to move your iTunes library to a new computer - Apple Support . Previous purchases from the iTunes Store may be available for re - download - see download your past - purchases of Apple Support.
If none of these approaches allows to recover the contents of your library, see user turingtest2 on recover your iTunes from your iPod or an iOS device library for a list of tools and methods that can be used to copy the media etc from iPod to iTunes.
-
Can I then set up my new and old iMac to use both for rendering first and consequences?
Can I then set up my new and old iMac to use both for rendering first and consequences? No special installation required?
and...
If I understand correctly, your ability under the license agreement to install the software
on the two systems don't allow for simultaneous use on both systems!
but...
for EI, there is the "Adobe after effects Render Engine"
documented here:
"In After Effects CS6 and later versions, you can now run aerender or use spyware file.
non-redevance rolling mode, serialization not require it. » !!!
HAHAHAHAHAHAHAHAHAHAHA!
-
When my main mail server migrated to a new system, they used Microsoft Outlook to organize my email. I used it for almost 2 months and it's awful. I would like to restore my old Thunderbird program. It seems to be working: I get the number of messages in my Inbox on the Thunderbird icon and an audio invites all new messages are received. The only problem is that I can't get in my mail because Thunderbird will accept none of the passwords that I offer (I only have three). Can someone please fix it so I can reset my password or have Thunderbird recognize one of my passwords? The main server wants to open a new account in Thunderbird, but it means that I lose all the data from the old account.
Thanks for any help you can provide.
Your, Eugene Eoyang
Create folders in the "Local folders" intends to organize e-mail.
Move all the emails from the email account in folders in local folders.
When emails are in local folders, you can delete the old account.
Tools > accounts settings
Select the old account
Click on "Actions account."
Select 'delete account '.Click on "Actions account."
Select 'add account '.
Enter the name, email address and password
Click on continue
Make sure that the appropriate type has been selected for example: pop or imapIf necessary, use the "Manual Configuration" button to enter the server settings
Click 'Done' to create the new e-mail account. -
Payment plan for the photographer and the creative cloud and can't use photoshop
Your subscription to cloud shows correctly on your account page?
If you have more than one email, you will be sure that you use the right Adobe ID?
https://www.adobe.com/account.html for subscriptions on your page from Adobe
.
If Yes
Sign out of your account of cloud... Restart your computer... Connect to your paid account of cloud
-Connect using http://helpx.adobe.com/x-productkb/policy-pricing/account-password-sign-faq.html
-http://helpx.adobe.com/creative-cloud/kb/sign-in-out-creative-cloud-desktop-app.html
-http://helpx.adobe.com/x-productkb/policy-pricing/activation-network-issues.html
-http://helpx.adobe.com/creative-suite/kb/trial--1-launch.html
-ID help https://helpx.adobe.com/contact.html?step=ZNA_id-signing_stillNeedHelp
-http://helpx.adobe.com/creative-cloud/kb/license-this-software.html
.
If no
This is an open forum, Adobe support... you need Adobe personnel to help
Adobe contact information - http://helpx.adobe.com/contact.html
Chat/phone: Mon - Fri 05:00-19:00 (US Pacific Time)<=== note="" days="" and="">===>
-Select your product and what you need help with
-Click on the blue box "still need help? Contact us. "
-
I use the aol email. You can use outlook exp for some contacts. How to configure an outlook account?
In your topic say you Outlook but in the body, you say Outlook and Outlook Express. Who is this? They have different agendas.
To access AOL, you use an IMAP account. See AOL own help pages for the configuration. http://about.AOL.com/FAQ/openmailaccess
-
How to configure a user to use getManager() for sound manager in HumanTask
Hello
I have a simple AC.
We create users and groups in weblogic and assign the task Participants using these users.
I want to build a simple human task, which must obtain authorization from the Director.
I don't want to assign the user statically, but I want funciton "user.getManager ()" allows you to assign a participant to the task on the 2nd level.
To do this, the user must be mapped to a handler. But how can we do this?
In weblogic-> security domains, I see only users and groups, but nowhere I see a Manager where I can assign orders to a Manager or a user to a card Manager.
Can someone help me in this.
Concerning
RaviKiranHi Ravi
1. nothing beats a Manager configured separately in the weblogic console. Sound like that. Even the Manager is also one user that another user. The link looks like this. Each user will have standard properties such as firstName, lastName, Department, dateOfBirth, phone number, email etc etc. They also have an attribute as a Manager and the value of the present is just reference to another user. I hope you got the point.2. If, in the console Weblogic, say you create 2 users: weblogic1, weblogic2, weblogic3. And you can assign properties of base for each other like firstName, lastName, etc.. For weblogic1, assign the handler as weblogic2. To weblogic2 assign Manager as weblogic3 etc.
3. now behind the screens in the Workflow, SOA, when you run user.getManager () and if the user is weblogic2, the value will be automatically weblogic2. And it lights up. You don't have to do any programming for it. The workflow will use the LDAP API to get the value for each standard property if they are named using standards such as firstName = givenName lastName = sn, emailId = mail etc etc. Here's all of the standard object properties for users, AD groups. Moreover, most of them apply to groups also in addition to users.
Now, the real trick is, when you create new users in weblogic, you can specify firstname, lastname, mail etc. But to specify the Manager, for now, use this workaround given post below. Before submit you samples or explore SOA/BPM, create some accounts testuser in weblogic ldap integrated by default using app demo community seed (servlet). You can open this EAR and then the WAR and extract the .xml file and edit to add any substance you want.
The link below should give you an idea more:
Re: Kingdom is not met for the BPM app (See my answer)
Re: Seeds Demo defective communityThank you
Ravi Jegga -
ACS 5.3 use LDAP. for one SSID and use IS HOST. for a different SSID
I have 2 SSID on WLCs
I wish I had 1 point SSID to the radius of the acs using LDAP store and the 2nd point SSID to the radius of the acs using identity store of the host for mac filtering.
both scenarios are working, but not all.
If I set the order of the rule I can get an SSID, but then the other fails.
Authentication failed :
22056 object was not found in the identity of the point of sale.
Access matched Service selection rule:
Rule-1
Comparative political identity rule:
Rule-1
Some identity stores:
RBLDAP
Evaluate the politics of identity
15004 Matched rule
15013 selected identity store-
24031 sending request to the primary LDAP server
24017 Looking up host in LDAP - 04-xx-xx-xx-xx-xx Server
24009 host not found in the LDAP server
22056 object was not found in the identity of the point of sale.
22058 advanced option that is configured for a unknown user is used.
22061 the option 'Refuse' Advanced is set in the case of a request for authentication has failed.
11003 returned RADIUS Access-Reject
If I move the mac add rule before the rule of ldap, but then the ldap authentication fails
Request for access received RADIUS 11001
11017 RADIUS creates a new session
11027 detected host Lookup UseCase (Service-Type = check call (10))
Assess Service selection strategy
15004 Matched rule
Access to Selected 15012 - MAC filter network access service
Evaluate the politics of identity
15004 Matched rule
15013 selected identity Store - internal hosts
24209 Looking internal host IDStore host - 04-xx-xx-xx-xx-xx
24211 found internal host IDStore host
Authentication 22037 spent
I tried to install the following without result.
It seems to me that there should be a simple process to do what happens. I thought that if the rule does not match it would be to move on to the next rule etc...
I might be able to live with the first ldap control and if it does not pass to the db of the local host, but seemingly ineffective.
https://supportforums.Cisco.com/thread/2133704
You can create a sequence of identity store so that if the end point is not present in the ldap database, then it can check its database of the local host.
Or you can create a condition in your selection of service such as if rule called-station-id ends with (AIDS) then you can have it match the rule that uses the appropriate rule pointing to ldap, another rule when called-station-id ends with (ssidB) match the rule that points to the rule that uses the database of the local host.
Here is the section on the configuration of the sequence of identity store, don't forget to select continue if user not found.
http://www.Cisco.com/en/us/docs/net_mgmt/cisco_secure_access_control_sys...
Thank you
Sent by Cisco Support technique iPad App
-
I use Firefox for 10 years and now I get this...
Hello, my name is Peter and I'm trying to update my plugins as usual and I get this below:
"Currently the plugin check service is only available for Firefox users. What can we do about it
to continue the update of my plugins. Help, please! Thank you very much!Here is the image capture.
E-mail: [email protected]
Note that troubleshooting information also shows the presence of a user.js file in the profile folder.
The user.js file will be present if you or a other software created this file and normally will not present.
You can check its contents with a text editor (right click: 'Open with'; do not double-click).
You can reset the preferences set via user.js on the topic: config page via the context menu to the default value or remove the prefs.file to reset all preferences...
The user.js file is read whenever Firefox is started and initializes the preferences to the specified value in this file, so the preferences set via user.js can be changed temporarily for the current session.You can remove the user.js file if you do not create this file yourself.
You can use this button to go to the current Firefox profile folder:
- Help > troubleshooting information > profile directory: see file (Linux: open the directory;) Mac: View in the Finder)
- http://KB.mozillazine.org/Profile_folder_-_Firefox
-
When I log into my Google account and want to add my own icons to the map, they appear no more when I use firefox. It seems that there is that an error GIF broken on the cards and then nothing pops up. I tried IE and Chrome on the same computer and it works fine. Would like to have my good firefox back. Please let me know if you can help with this question. It seems to have started Thursday last afternoon.
-
Diagnostic report (1.9.0027.0):
-----------------------------------------
Validation of Windows data-->Validation code: 0
Validation caching Code online: n/a, hr = 0xc004f012
Windows product key: *-*-*-*-4DKQM
Windows Product Key hash: IATEY1RPs/6yTJc8i9/L2mO3134 =
Windows product ID: 55041-090-2310206-86588
Windows product ID type: 6
Windows license type: Volume MAK
The Windows OS version: 6.1.7600.2.00010100.0.0.048
ID: {6772437A-B180-4ABD-87E8-8F00D1560AA8} (3)
Admin: Yes
TestCab: 0x0
LegitcheckControl ActiveX: N/a, hr = 0 x 80070002
Signed by: n/a, hr = 0 x 80070002
Product name: Windows 7 Professional
Architecture: 0 x 00000009
Build lab: 7600.win7_rtm. 090713 1255
TTS error:
Validation of diagnosis:
Resolution state: n/aGiven Vista WgaER-->
ThreatID (s): n/a, hr = 0 x 80070002
Version: N/a, hr = 0 x 80070002Windows XP Notifications data-->
Cached result: n/a, hr = 0 x 80070002
File: No.
Version: N/a, hr = 0 x 80070002
WgaTray.exe signed by: n/a, hr = 0 x 80070002
WgaLogon.dll signed by: n/a, hr = 0 x 80070002OGA Notifications data-->
Cached result: n/a, hr = 0 x 80070002
Version: N/a, hr = 0 x 80070002
OGAExec.exe signed by: n/a, hr = 0 x 80070002
OGAAddin.dll signed by: n/a, hr = 0 x 80070002OGA data-->
Office status: 109 n/a
OGA Version: N/a, 0 x 80070002
Signed by: n/a, hr = 0 x 80070002
Office Diagnostics: 025D1FF3-364-80041010_025D1FF3-229-80041010_025D1FF3-230-1_025D1FF3-517-80040154_025D1FF3-237-80040154_025D1FF3-238-2_025D1FF3-244-80070002_025D1FF3-258-3Data browser-->
Proxy settings: N/A
User Agent: Mozilla/4.0 (compatible; MSIE 8.0; Win32)
Default browser: C:\Program Files (x 86) \Mozilla Firefox\firefox.exe
Download signed ActiveX controls: fast
Download unsigned ActiveX controls: disabled
Run ActiveX controls and plug-ins: allowed
Initialize and script ActiveX controls not marked as safe: disabled
Allow the Internet Explorer Webbrowser control scripts: disabled
Active scripting: allowed
Recognized ActiveX controls safe for scripting: allowedAnalysis of file data-->
[File mismatch: C:\Windows\system32\wat\watadminsvc.exe[Hr = 0 x 80070003]
[File mismatch: C:\Windows\system32\wat\npwatweb.dll[Hr = 0 x 80070003]
[File mismatch: C:\Windows\system32\wat\watux.exe[Hr = 0 x 80070003]
[File mismatch: C:\Windows\system32\wat\watweb.dll[Hr = 0 x 80070003]Other data-->
Office details:{6772437A-B180-4ABD-87E8-8F00D1560AA8} 1.9.0027.0 6.1.7600.2.00010100.0.0.048 x 64 *-*-*-*-BATH 55041-090-2310206-86588 6 S-1-5-21-2835569688-3515831139-2409678613 Gigabyte Technology Co., Ltd.. EP43-DS3 Award Software International, Inc.. F7 20080723000000.000000 + 00057BA3607018400F8 0418 0409 GTB Standard Time(GMT+02:00) 0 3 109 Content Spsys.log: 0 x 80070002
License data-->
The software licensing service version: 6.1.7600.16385Name: Windows 7 Professional edition
Description: operating system Windows - Windows (r) 7, channel VOLUME_MAK
Activation ID: 9abf5984-9c16-46f2-ad1e-7fe15931a8dd
ID of the application: 55c92734-d682-4d71-983e-d6ec3f16059f
Extended PID: 55041-00172-090-231020-03-1048-7600.0000-2152012
Installation ID: 000434290375283584583142230723646320847462404435962874
Processor certificate URL: http://go.microsoft.com/fwlink/?LinkID=88338
The machine certificate URL: http://go.microsoft.com/fwlink/?LinkID=88339
Use license URL: http://go.microsoft.com/fwlink/?LinkID=88341
Product key certificate URL: http://go.microsoft.com/fwlink/?LinkID=88340
Partial product key: 4DKQM
License status: initial grace period
Time remaining: 42660 minute (s) on (29 day (s))
Remaining Windows rearm count: 3
Trust time: 02.08.2012 23:13:51Windows Activation Technologies-->
HrOffline: 0x00000000
HrOnline: n/a
Beyond: 0 x 0000000000000000
Event time stamp: n/a
ActiveX: Not registered - 0 x 80040154
The admin service: not registered - 0 x 80040154
Output beyond bitmask:--> HWID data
Current HWID of Hash: NgAAAAEABgABAAEAAAABAAAAAgABAAEA6GF2b1CmKAtGvIQ0DDWSPOS/cCpifWTzzmHejExYActivation 1.0 data OEM-->
N/AActivation 2.0 data OEM-->
BIOS valid for OA 2.0: Yes, but no SLIC table
Windows marker version: N/A
OEMID and OEMTableID consistent: n/a
BIOS information:
ACPI Table name OEMID value OEMTableID value
APIC GBT GBTUACPI
FACP GBT GBTUACPI
HPET GBT GBTUACPI
MCFG GBT GBTUACPI
SSDT PmRef CpuPmactivation by telephone (call of the operator)
Click the Start button
in the search box, type
SLUI 4
and press the Enter key
Follow the instructions, but when asked what service you need the ansafone phone, don't answer - it should oblige the operator to answer, who can deal with you -
How to use FNDLOAD for functions, menus, and responsibilities
Hi all
I have a set of custom functions, menus, and responsibilities in an EBS 12.1.1 (Windows) I don't want to export using FNDLOAD.
These exported objects can be imported again into a 11.5.10 EBS installation?
I tried to export the menus by using this command:
bin\FNDLOAD apps/apps@VIS 0 Y DOWNLOAD %FND_TOP%/patch/115/import/afscursp.lct resp.ldt FND_RESPONSIBILITY RESP_KEY = "TESIS_INVENTORY_SUPER_USER".
and it worked OK (at least I think that was the case).
But after the download in 11i system, menus are not there? What could be the problem? Here is the log:
---------------------------------------------------------------------------
Application object library: Version: 11.5.0 - development
Copyright (c) 1979, 1999, Oracle Corporation. All rights reserved.
module:
---------------------------------------------------------------------------
Current system time is March 21, 2011 15:00:48
---------------------------------------------------------------------------
Download from the menus.ldt of data file
Changing environment NLS_LANGUAGE AMERICA database
Dump files LCT/LDT (E:\oracle\visappl\fnd\11.5.0/patch/115/import/afsload.lct(115.58), menus.ldt) to stage tables
LCT E:\oracle\visappl\fnd\11.5.0/patch/115/import/afsload.lct(115.58 dump file) in FND_SEED_STAGE_CONFIG
Empty the LDT file menus.ldt in FND_SEED_STAGE_ENTITY
Dumped the lot ( NULL , MENU MENU TESIS_INV_SUPER_USER) in FND_SEED_STAGE_ENTITY
Download from stage tables
---------------------------------------------------------------------------
Concurrent query ended with success
Current system time is March 21, 2011 15:00:54
---------------------------------------------------------------------------
Is it possible to export and import a menu without worrying about the functions used by the menu? So far, I don't have export and import functions and maybe I need to do this first!
Thank you very much
Konradand it worked OK (at least I think that was the case).
Please check the TDL file to check.
But after the download in 11i system, menus are not there? What could be the problem? Here is the log:
Is it possible to export and import a menu without worrying about the functions used by the menu? So far, I don't have export and import functions and maybe I need to do this first!
If you have verified the data in the file ldt, please run FNDLOAD download command with 'WARNING = YES UPLOAD_MODE = REPLACE CUSTOM_MODE = FORCE' options and then check.
Thank you
Hussein -
The views using materialized for data warehousing and reporting
Hello
I would better understand the materialized views in Oracle in particular the use of the option: REFRESH QUICKLY ON COMMIT. The oracle database, we care is a PLM application and any of the tables to apply using the primary key constraints. Instead, the application uses a separate schema to store the key values for each object/save in the database. I would use Materialized View to the creation of a data warehouse smart to transfer only the lines that have updated since the last refresh of the warehouse. My understanding of the materialized views you can't define a until and unless you have a primary key constraint. It's fine and understandable.
Can we have an oracle separate sid something like WSHD - data warehouse and using the database between the main site links - site WSHD always transfer lines that have changed since the last refresh with REFRESH QUICKLY ON COMMIT option? (Note: this is taking into account the fact that a database primary key constraints defined on the paintings of masters.)
I guess you have to install MV NEWSPAPER tables on the main table and then create a materialized using option QUICKLY ON COMMIT REFRESH view?
Am I wrong?
Will there be another option for the transfer of the lines of main tables in the data warehouse in Oracle?
Thank you very much.
See you soon.
Rohan
Published by: José on 10/01/2009 00:211. you can't define a materialized as ON COMMIT REFRESH in a separate database view. It must be in the database even if it's to refresh commit it.
See http://hemantoracledba.blogspot.com/2008/06/mvs-with-refresh-on-commit-cannot-be.html2. you don't have to have a primary key to set a MV. You can set a MV WITH ROWID (except if you re-create the source table, you need to do a refresh of the MV because ROWID changes).
See http://download.oracle.com/docs/cd/B19306_01/server.102/b14200/statements_6002.htm#i2063793Hemant K Collette
-
How can I use FNDLOAD for XML reports and data defnitions
I program simultaneous registerd bound reports xml and data defnitions in instance of staging and managed to switch to DEV... After updating of this stage and when I download the details of DEV and transferred to the program only simultaneous scene I can download... Can we use the command FNDLOAD for definitions of data or the data model for the XML report, FNDLOAD used for the simultaneous program, he transferred only the details of the program at the same time.Hello
Use XDOLoader.
Note: 469585.1 - how to use XDOLoader?
https://metalink2.Oracle.com/MetaLink/PLSQL/ml2_documents.showDocument?p_database_id=not&P_ID=469585.1Kind regards
Hussein -
Do I need to install and configure WiFi? (I just want to use it for my iPad on any TV for presentations in mirror)
Yes
Maybe you are looking for
-
I can't understand how to start the calendar after the migration.
I can't understand how to start the calendar of lighting. Documentation, said he will start automatically, but it doesn't.
-
Re: Satellite Pro A40 - cannot find the boot order in the BIOS
Hi, we have a very old A40 Satellite Pro with a new hard drive. We are tryng to change the boot order in the BIOS to recognize the CD player ready for the windows disk. However, there seems to be no option to change the BIOS not boot order, and Yes,
-
How can I get rid of a web page that I don't want?
When I want to browse the internet a page is in place called IN BOX I want to get rid of it! How?
-
no internet connection wireless
I just reinstalled my windows vista x 64. I don't know how to get wireless internet access on this subject, I use a wired internet connection. I need help as soon as POSSIBLE please. ? Thank you Nico
-
I recently installed windows xp service pack 3 on a t61 and tried to install the drivers different wireless on lenovo but time site every time I try to install it, it says "the executable you are trying to run has been corrupted. You can get another