Similar Questions

• Failing video card? Or a logic board problem?

  Re: video card failure?

  It is a follow-up to a previous debate.  Less than 2 years ago, I had a default videocard from apple (OEM) with lines of scratches on the screen.  I replaced it with a

  ATI Radeon HD 4870 Graphics Upgrade Kit for Mac Pro Apple sold by: JAG technology it worked fine until I have let my old Mac 2008 for 9 months. When I turned it on to use for art, the startup has been slow and the screen became often black or never turned on at all. And the map seemed to be running really hot.    I pulled the card according to the suggestions and started and checked start with Hello time and on screen sharing my network and it seemed to have a time of normal start for this computer. But when doing screen sharing the screen remains black. So, I can see the contents of the hard drive, etc., but there is no display.

  I ran TechTool Pro and all components on the Mac pass inspection including the video ram.    I wonder if the problem is a graphics processor integrated on the system board itself or just the graphics card.    If the chip card display does not work, shouldn't be able to see a display from a distance even in the absence of a graphics card? Or not?   I don't want to pay $150 to replace a card if it is bad.

  Thank you for your help.

  The f

  There is no piece of the display on the map. For video, you need a working video card.

  Try reinstalling on both ends of the cables of two power between the card and power on the logic board UAX connectors.

  Check that the fan turns freely

• Watch an interactive pdf - page break at the touch on the screen - SMART board problem?

  Is there a way to disable the page advance when you touch the screen in the visualization of interactive PDF files?

  Adobe Acrobat Pro X c. 10.1.3

  Reading and full screen, I have the url and the navigation links that work very well.

  But when I 'touch' the screen out of one of these live areas with my cursor, the page goes to the next.

  I could avoid this but I'm worried about my customers who will use it on a SMART board.

  I foresee it as a problem when displaying on a SMART board (I don't have access to one) where the teacher is pointing to something on the page, and he lurched suddenly to another, or when you use the SMART display writing tool, it can jump.

  Anyone?

  Thanks for your thoughts.

  Nothing you can do in the PDF itself, but on the dialog box Preferences for Acrobat/Reader, full-screen you need to disable «left click to go forward one page...» "option.

• Virus or the logic board problem?

  Everyone has this screen before? Another screen that appears is a bunch of letters and numbers. Now my computer won't even turn on half the time. Sometimes just the fan will start the liquidation. Before what is going on started my computer would freeze and then turns off randomly. I called apple and I also took at the Genius Bar. They think maybe it's logic board. The Lady said that my best money wise option would be that she be sent for $280, more repairs before as I do that I wanted to see if anyone had any advice. At this point, I wonder if I should just get a new computer. I don't use the computer a lot to the point where this should be the case. Would it maybe a virus?

  

  No, it is not caused by malicious software.

  You must replace the system board, if you want to keep the Mac.

  Best.

• T400 - 6474CTO - key board problem

  All of a sudden this problem occurred: n, b, space, arrow to the top right left suddenly stopped working. Working now and then, for the most part. KB has changed; the same problem.

  Any clue?

  I change the motherboard. Problem solved.

• Board problem and number

  I encountered a problem while writing a special sub.vi whose purpose is to depend on a specified range, spit out a bunch of different test settings.

  The problem, as shown in the spare part, has to do with the fact that the majority of the beaches, it spits out a table frequencies to test.  However, there are some beaches that require only 1 test frequency, and I can't do a painting that is only 1 entry.

  This .vi acts as a sub.vi in a larger program, and I really need them to go all the same (the 'Frequencies' table) indicator.

  In the cut wire insert a table to build.  It will create an array with a single element.

  The exit flag requires a table.  The number of elements in the array can be 0, 1,... ~ 2 ^ 32.

  Lynn

• Strictly increasing Board problem

  I run a strange problem when you try to create a Subvi which would check if input of U32 1 d-array numbers is in order with regard to strictly increasing index. A Boolean output is true if this is the case (maybe there is an easier way to check?)

  When I hit the run button continually to check it out, it seems to work for most of the time, but sometimes I get a true value even if the elements are clearly not ascending or have identical values.

  The image attatched I put probes on wires to see what values they have. As you can see that is the item index 4-2 and 1 respectively. The higher or equal-function is defined for comparing aggregates, but it says that-2 > = 1 is true?

  Is there a problem with the old data still in memory or something?

  Thanks in advance

  Oscar

  Hi Oscar,.

  no need to use a loop FOR:

  

  To your question:

  Choose the method of comparison can have side effects on the result of the comparison. Be sure to read the help...

• How do l fix doesn't have system board problem RTC accuracy test

  Hello

  When running my PC Checkup(system tests), l has a problem, the overall result of the test revealed that the card system, RTC accuracy Test
  WSBO1-HWX failed. How do l fix the problem so that the RTC accuracy Test will pass in the future?
  Kind regards
  Amos.

  Hi, Amos.

  What is your computer make and model and the Windows operating system?

  RTC - this test accuracy test verifies the accuracy of the RTC on the motherboard and compares it to the processor clock to determine if the motherboard and CPU clock are too out of sync. This test will discover problems with updates of time system, periodic interruptions and interruptions of the alarm. If the test detects errors with the accuracy of the RTC, it will record the test failure in report of the additional details in the test log.

  Your Windows system time may not be the same as the Bios time.

  Check in the Bios

  Compare with time Windows

  If the clock keeps losing time, check the battery

  You may need to replace the CMOS battery

• for loop Board problem

  I'm really new to programming in labview (started on Monday). I followed the toturials of labview and online or Web site, but I have not been able to solve.

  Edit: all the values in the table are the same...

  Maybe someone here can take a look.

  
  

• QML Board problem

  Hi all, I have warts for use table in the ListView to store the State of the element, and set it in the ListItem.onInitializedChanged section.

  ListView{
     var arr = new Array();
  ...
  

  but the second line is marked in red (syntax error). How to use arrays in qml?

  Hello

  OK, I got your issue. I tried, but not able to change the value of the array element.

  In fact I don't know the exact solution, but I have a temporary solution.

  Hopefully useful for you

  Try this

  import bb.cascades 1.0
  
  Page {
  
      content: Container {
          Button {
              text: "Get Checked Items"
              onClicked: {
                  for (var a = 0; a < 5; a ++) {
                      console.log(listView.arr[a]);
                  }
              }
          }
  
          ListView {
              id: listView
              property variant arr: new Array(5)
  
              dataModel: ArrayDataModel {
              }
  
              listItemComponents: [
                  ListItemComponent {
                      type: "listItem"
                      CheckBox {
                          text: "Select"
  
                          onCheckedChanged: {
                              if (checked) {
                                  var tempArray = new Array();
                                  for (var i = 0; i < parent.arr.length; i ++) {
                                      tempArray[i] = parent.arr[i];
                                  }
  
                                  tempArray[ListItem.indexPath] = 1;
                                  parent.arr = tempArray;
                              } else {
                                  var tempArray = new Array();
                                  for (var i = 0; i < parent.arr.length; i ++) {
                                      tempArray[i] = parent.arr[i];
                                  }
  
                                  tempArray[ListItem.indexPath] = 0;
                                  parent.arr = tempArray;
                              }
                          }
  
                          onCreationCompleted: {
                              var tempArray = new Array();
                              for (var i = 0; i < parent.arr.length; i ++) {
                                  tempArray[i] = parent.arr[i];
                              }
  
                              tempArray[ListItem.indexPath] = 0;
                              parent.arr = tempArray;
                          }
                      }
                  }
              ]
  
              function itemType(data, indexPath) {
                  return "listItem";
              }
  
              onCreationCompleted: {
                  for (var a = 0; a < 5; a ++) {
                      dataModel.append({
                              "exampleProperty": a
                          })
                  }
              }
          }
      }
  }
  

  

• Virtual key board problem...

  Hello gurus,

  I am a newbee and lately have begun to build the app for BB OS version 4.2, 4.3 - 4.6 and 4.7 or upward...

  Now I have run into the situation as follows...

  I added following code to hide the virtual keyboard

  #ifdef JDE_4_7<-- pre="" processor="" for="" building="" different="" version="" cod="">

  Import net.rim.device.api.ui.VirtualKeyboard;

  endif

  Some where in the middle of my class, I added following code to hide the virtual keyboard

  Hey guys... I found the solution... just to make a few simple changes in code...

  Here it is...

• Board problem - urgent need help TT

  I made a game for my capture mission

  Greeny1, 2 Greeny, is object which fall

  and I want that they play their own different animation (excerpt from different film) when the impact of the receiver.

  
  

  my part of the code is as...

  
  

  var myArrayGreeny1:Array = new Array();

  var myArrayGreeny2:Array = new Array();

  Greeny1

  var myTimer1:Timer = new Timer (1000);

  myTimer1.addEventListener (TimerEvent.TIMER, spawnGreeny1);

  myTimer1.start ();

  function spawnGreeny1(e:TimerEvent)

  {

  var Greeny1C:Greeny1 = new Greeny1();

  addChild (Greeny1C);

  myArrayGreeny1.push (Greeny1C);

  }

  Greeny2

  var myTimer2:Timer = new Timer (2000);

  myTimer2.addEventListener (TimerEvent.TIMER, spawnGreeny2);

  myTimer2.start ();

  function spawnGreeny2(e:TimerEvent)

  {

  var Greeny2C:Greeny2 = new Greeny2();

  addChild (Greeny2C);

  myArrayGreeny2.push (Greeny2C);

  }

  stage.addEventListener (Event.ENTER_FRAME, startGame);

  function startGame(e:Event)

  {

  Table Greeny1

  for (var i = 0; i < myArrayGreeny1.length; i ++)

  {

  If (Catcher.hitTestObject (myArrayGreeny1 [i]))

  {

  var xplodeG1:Greeny1Animation = new Greeny1Animation();

  addChild (xplodeG1);

  xplodeG1.x = myArrayGreeny1 [i] .x;

  xplodeG1.y = myArrayGreeny1 [i] there;

  xplodeG1.gotoAndPlay (2);

  removeChild (myArrayGreeny1 [i]);

  myArrayGreeny1.splice (i, 1);

  }

  Another yew (beam.hitTestObject (myArrayGreeny1 [i]))

  {

  removeChild (myArrayGreeny1 [i]);

  myArrayGreeny1.splice (i, 1);

  }

  }

  Table Greeny2

  for (var i = 0; i < myArrayGreeny2.length; i ++)

  {

  If (Catcher.hitTestObject (myArrayGreeny2 [i]))

  {

  var xplodeG2:Greeny2Animation = new Greeny2Animation();

  addChild (xplodeG2);

  xplodeG2.x = myArrayGreeny2 [i] .x;

  xplodeG2.y = myArrayGreeny2 [i] there;

  xplodeG2.gotoAndPlay (2);

  removeChild (myArrayGreeny2 [i]);

  myArrayGreeny2.splice (i, 1);

  }

  Another yew (beam.hitTestObject (myArrayGreeny2 [i]))

  {

  removeChild (myArrayGreeny2 [i]);

  myArrayGreeny2.splice (i, 1);

  }

  }

  }

  and it showed in dual definition of the variable on these lines:

  for (var i = 0; i < myArrayGreenyXX.length; i ++)

  
  

  
  

  can someone help me on this code?

  I don't quite know TT flash

  Declare the 'I' variable separately to the top with the other variables and then use it in loops without declaring it.

  var i: uint;

  var myArrayGreeny1:Array = new Array();

  var myArrayGreeny2:Array = new Array();

  for (i = 0; i< myarraygreenyxx.length;="">

• Byte Board problem

  Hi all
  
  I try to send a swing textField APDU to map java. When I write command and enter the command by the getText() method stirng then command is formatted text. I'm bytes of it using command.getBytes (); but it converts the command in decimal format as:

  String command = "00A404000C70726163746963652E61707000";
          byte [] byteArray = command.getBytes();
             System.out.println("to byte array");
              for (int i = 0; i < byteArray.length; i++) 
             {
                 byte b = byteArray;
  
  System.out.print(" "+b);
  
  }
  
  
  
  
  
  output: 
  
  48 48 65 52 48 52 48 48 48 67 55 48 55 50 54 49 54 51 55 52 54 57 54 51 54 53 50 69 54 49 55 48 55 48 48 48
  
  
  
  but i want this to be like:
   0 -92 4 0 14 117 115 101 114 97 112 112 108 101 116 46 97 112 112 0
  The above output is the result of:
          byte[] selectApplet = {     (byte)0x00,(byte)0xA4 ,(byte)0x04 ,     (byte)0x00 ,(byte)0x0E ,(byte)0x75 ,
                                               (byte)0x73 ,(byte)0x65 ,(byte)0x72 ,(byte)0x61 ,(byte)0x70 ,(byte)0x70 ,
                                               (byte)0x6c ,(byte)0x65 ,(byte)0x74 ,(byte)0x2E ,(byte)0x61 ,(byte)0x70 ,     
                                                                          (byte)0x70 ,(byte)0x00 };
             System.out.println("hexbyte print: ");
             for (int i = 0; i < selectApplet.length; i++) 
             {
                 byte b = selectApplet;
  
  System.out.print(" "+b);
  
  }
  
   
  
  how can i do that ?
  
  
  
  BR
  
  Ume 
  			 
  Well, you're hurting. You want to convert each character in the string into a byte. Notice how your zeros in the string converted 48 s?
  You can divide the String into char-2 pieces and use Integer.parseInt with a radix of 16 to analyze in bytes.
  		   

• Small loop Board problem

  Hey guys I'm reteriving a value using the getitemAt and insertion in a loop

  Now, I want to get this answer and store it in a table. I use additemAt but it doesn't seem to work. (im probably something missing :/) The data area of the table where I want to save is the following

  < mx:DataGridColumn dataField = "Num_Mach" headerText = "Machines" / >

  Here is the code

  for (var x: int = 0; x = 4; x ++) {}

  Servicetimes = int (ProcessAdder.getItemAt (x). Service_Rate)

  for (var NoMachines:int = 1; ValueRow > 100; NoMachines++)

  {

  PartProduced = Servicetimes * NoMachines

  ValueRow = 100 *(ArrivalParts/PartProduced)

  }

  NoMachines = NoMachines-1;

  ProcessAdder.addItemAt({Num_Mach:NoMachines});)

  }

  Thank you for the charges

  Gug88,

  Your code is a lot of bad things.

  First of all the variables and functions are NEVER appointed by a capital letter at the beginning - you should always use a lowercase letter at the beginning when naming variables and functions. Things that begin with a capital letter are Classes or constants.

  You should not rely on the value of a variable to loop the loop is completed.

  If you're going to have to add an element to a specific location, you must say where this place is.

  It is not clear if it is an array or ArrayCollection collection.

  You can set a value of just table by processAdder [someIndex] = {Num_Mach:NoMachines};

  For a collection of ArrayCollection is processAdder... addItemAt ({Num_Mach:NoMachines}, someIndex);

  The documentation from Adobe is excellent - spend time looking for how things work.

  Paul

• Board problem - selects related

  Hello

  I'm a newbie when it comes to this, so I apologize in advance.

  I'm currently building a year/make/model partner select search. I found an HTML, PHP and the related select JQuery Plugin I try to convert for use with CF.

  It looks like I can use a table to replace the PHP page that provides static data:

  <? PHP

  $stateID = $_GET ["stateID"];

  $countyID = $_GET ['countyID'];

  $townID = $_GET ['townID'];

  $html = $_GET ['html'];

  $states = array();

  $states ['MY'] = "Massachusetts."

  $states ['VT'] = 'Vermont ';

  $states ['SC'] = 'South Carolina. "

  $counties = array();

  $counties ['MY'] ['GRANGE'] = "Barnstable";

  $counties ['MY'] ['PLYM'] = 'Plymouth '.

  $counties ['VT'] ['CHIT'] = "Chittenden";

  $counties ['SC'] ['NEDA'] = 'Anderson ';

  If ($stateID & &! $countyID & &! $townID) {}

  echo json_encode ($counties [$stateID]);

  } else if ($stateID & & $countyID & &! $townID) {}

  echo json_encode ($towns [$stateID] [$countyID]);

  } else if (isset ($villages [$stateID] [$countyID] [$townID])) {}

  echo json_encode ($villages [$stateID] [$countyID] [$townID]);

  } else {}

  ECHO "{}";

  }

  ? >

  I am trying to convert an array of the following so that I can access from the index.cfm page:

  < name cfquery = "qYear" datasource = "MyDS" username = 'MyUser' password = 'MyPass' >

  Select distinct YearRange

  of ExactFit2012

  order of YearRange

  < / cfquery >

  < name cfquery = "qMake" datasource = "MyDS" username = 'MyUser' password = 'MyPass' >

  Select Make separate

  of ExactFit2012

  order by brand

  < / cfquery >

  < name cfquery = "qModel" datasource = "MyDS" username = 'MyUser' password = 'MyPass' >

  Select distinct model

  of ExactFit2012

  order by model

  < / cfquery >

  < cfset myYear = ListToArray (ValueList (qYear.YearRange)) / >

  < cfset myMake = ListToArray (ValueList (qMake.Make)) / >

  < cfset myModel = ListToArray (ValueList (qModel.Model)) / >

  < Cfoutput >

  #myYear # < br >

  #myMake # < br >

  #myModel #.

  < / Cfoutput >

  When I do that, I get the error:

  Error occurred while processing request

  Run database query error. [Macromedia] [SQLServer JDBC Driver] [SQL Server] Invalid column name 'Ford '.

  index.cfm:

  < ! DOCTYPE html PUBLIC "-//W3C//DTD XHTML 1.0 Strict / / IN" "http://www.w3.org/TR/xhtml1/DTD/xhtml1-strict.dtd" > ""

  " < html xmlns =" http://www.w3.org/1999/xhtml ">

  < head >

  < meta http-equiv = "Content-Type" content = text/html"; charset = iso-8859-1 "/ >"

  jQuery < title > Related selects < /title >

  " < script src =" http://AJAX.googleapis.com/AJAX/libs/jQuery/1.4.2/jQuery.min.js "type =" text/javascript"> < / script > "

  "< script src="src/jquery.relatedselects.min.js "type =" text/javascript"> < / script >

  < style type = "text/css" >

  Body {make: 12px helvetica, arial, without serif ;}}

  < / style >

  < script type = "text/javascript" >

  $(function() {})

  $("#example-1,_#example-3").relatedSelects ({}

  onChangeLoad: "MyArray.cfm."

  defaultOptionText: "choose an Option", he said.

  Selects: {}

  'Make': {loadingMessage: ' year loading... "} »},

  'YearRange': {loadingMessage: 'Make loading...} »},

  'Model': {loadingMessage: 'model loading...} »},

  'OverallSize':)

  }

  });

  });

  < /script >

  < / head >

  < body >

  < form id = "added" >

  < select name = "YearID" >

  < option value = "" > choose year & raquo; < / option >

  < cfoutput query = "qYear" >

  < option value = "#YearRange #" > #YearRange # < / option >

  < / cfoutput >

  < / select >

  < select name = "Make" >

  < option value = "" > choose do & raquo; < / option >

  < / select >

  < select name = "Model" >

  < option value = ' model' > choose model & raquo; < / option >

  < / select >

  < select name = "OverallSize" >

  < option value = "" > choose size & raquo; < / option >

  < / select >

  < / make >

  < / body >

  < / html >

  I can go avout this woring all, but I tried 3 tutorials of cfc with no luck, so I hope that the related JQuery select will do.

  See you soon,.

  Aaron

  good