Bookmarks created by JavaScript cannot be used normally in Android

Similar Questions

• Tables created in a stored procedure cannot be used with dynamic SQL? The impact?

  There is a thread on the forum which explains how to create tables within a stored procedure (How to create a table in a stored procedure , however, it does create a table as such, but not how to use it (insert, select, update, etc.) the table in the stored procedure.) Looking around and in the light of the tests, it seems that you need to use dynamic SQL statements to execute ddl in a stored procedure in Oracle DB. In addition, it also seems that you cannot use dynamic SQL statements for reuse (insert, select, update, etc.) the table that was created in the stored procedure? Is this really the case?
  
  If this is the case, I am afraid that if tables cannot be 'created and used"in a stored procedure using the dynamic SQL, as is the case with most of the servers of DB dynamic SQL is not a part of the implementation plan and, therefore, is quite expensive (slow). This is the case with Oracle, and if yes what is the performance impact? (Apparently, with Informix, yield loss is about 3 - 4 times, MS SQL - 4 - 5 times and so on).
  
  In summary, tables created within a stored procedure cannot be 'used' with dynamic SQL, and if so, what is the impact of performance as such?
  
  Thank you and best regards,
  Amedeo.
  
  Published by: AGF on March 17, 2009 10:51

  AGF says:
  Hi, Frank.

  Thank you for your response. I understand that the dynamic SQL is required in this context.

  Unfortunately, I am yet to discover "that seeks to" using temporary tables inside stored procedures. I'm helping a migration from MySQL to Oracle DB, and this was one of the dilemmas encountered. I'll post what is the attempt, when more.

  In Oracle, we use [global temporary Tables | http://www.psoug.org/reference/OLD/gtt.html?PHPSESSID=67b3adaeaf970906c5e037b23ed380c2] aka TWG these tables need only be created once everything like a normal table, but they act differently when they are used. The data inserted in TWG will be visible at the session that inserted data, allowing you to use the table for their own temporary needs while not collide with them of all sessions. The data of the TWG will be automatically deleted (if not deleted programmatically) when a) a commit is issued or b) the session ends according to the parameter that is used during the creation of the TWG. There is no real need in Oracle to create tables dynamically in code.

  I noticed that many people say that the "Creation of the tables within a stored procedure" is not a good idea, but nobody seems necessarily explain why? Think you could elaborate a little bit? Would be appreciated.

  The main reason is that when you come to compile PL/SQL code on the database, all explicit references to tables in the code must correspond to an existing table, otherwise a djab error will occur. This is necessary so that Oracle can validate the columns that are referenced, the data types of those columns etc.. These compilation controls are an important element to ensure that the compiled code is as error free as possible (there is no accounting for the logic of programmers though ;)).

  If you start to create tables dynamically in your PL/SQL code, so any time you want to reference this table you must ensure that you write your SQL queries dynamically too. Once you start doing this, then Oracle will not be able to validate your SQL syntax, check the types of data or SQL logic. This makes your code more difficult to write and harder to debug, because inevitably it contains errors. It also means that for example if you want to write a simple query to get that one out in a variable value (which would take a single line of SQL with static tables), you end up writing a dynamic slider all for her. Very heavy and very messy. You also get the situation in which, if you create tables dynamically in the code, you are also likely to drop tables dynamically in code. If it is a fixed table name, then in an environment multi-user, you get in a mess well when different user sessions are trying to determine if the table exists already or is the last one to use so they can drop etc. What headache! If you create tables with table names, then variable Dynamics not only make you a lot end up creating (and falling) of objects on the database, which can cause an overload on the update of the data dictionary, but how can ensure you that you clean the tables, if your code has an exception any. Indeed, you'll find yourself with redundant tables lying around on your database, may contain sensitive data that should be removed.

  With the TWG, you have none of these issues.

  Also, what is the impact on the performance of the dynamic SQL statements in Oracle? I read some contrasting opinions, some indicating that it is not a lot of difference between static SQL and SQL dynamic in more recent versions of Oracle DB (Re: why dynamic sql is slower than static sql is this true?)

  When the query runs on the database, there will be no difference in performance because it is just a request for enforcement in the SQL engine. Performance problems may occur if your dynamic query is not binding variable in the query correctly (because this would cause difficult analysis of the query rather than sweet), and also the extra time, to dynamically write the query running.

  Another risk of dynamic query is SQL injection which may result in a security risk on the database.

  Good programming will have little need for the tables of dynamically created dynamically or SQL.

• Can embed you fonts in a pdf file after that the pdf has been created? I received a PDF of an another designer, made a few minor corrections, and now the printer cannot be used because the original pdf didn't have all fonts embedded. Any ideas?

  Can embed you fonts in a pdf file after that the pdf has been created? I received a PDF of an another designer, made a few minor corrections, and now the printer cannot be used because the original pdf didn't have all fonts embedded. Any ideas?

  Use the Acrobat Pro preflight!

  To incorporate the missing fonts in Acrobat Preflight profile will incorporate the missing fonts in your PDF file assuming that:

  (1) the fonts in question are installed on your system and

  (2) the police themselves is not protected against the incorporation (they can at least see and print incorporation.

  -Dov

• I want to use the digital signature on a form filliable but cannot. My digital signature is created, but I can't use it.

  I want to use the digital signature on a form to fill out, but can't. My digital signature is created, but I can't use it.

  If you want to type their name, you can add a text field, but they can do it in any case either by using the comment tool to add text or the pencil comment (if they want to hand-draw draw a signature).

• I created a Javascript script that adds a watermark on the document action "paper print".  This works in Acrobat Pro, but does not work in the drive.

  I created a Javascript script that adds a watermark on the document action "paper print".  This works in Acrobat Pro, but does not work in the drive.  I am a novice using Javascript, so what am I doing wrong?

  Cannot use either addWatermarkFromFile or addWatermarkFromText methods of document with player as shown in the documentation. You can hide/display the form fields and the existing layers, so consider this approach.

• I want to create an addon of firefox using python. Please let me know how this can be achieved

  Hi team, support

  I intend to create an Add on Firefox using python. Please let me know how this can be achieved.

  Kind regards

  Sandeep

  Hi Sandeep, support.mozilla.org is for user only support, so we cannot give you advice for the development of extensions in this place.

  Please see resources at https://developer.mozilla.org/en-US/Add-ons or check out the mozilla forum dedicated to the development of addon at https://forums.mozilla.org/viewforum.php?f=7.

  Thank you

• Screen options opens if big top is cut and cannot be used

  It is recurrent and cannot fix.
  The (box) screen options opens if big top is cut and cannot access anything but the general screen?

   I have my resolution set to native 1600x900 100%.  Decreasing page (home page) size does not help.
   I am running Windows7 on NEW COMPUTER.
  

  This only happens in this Options window or other windows depend on as well?

  You can also attach a screenshot?

  • http://en.Wikipedia.org/wiki/screenshot
  • https://support.Mozilla.org/KB/how-do-i-create-screenshot-my-problem

  Use a type of compressed as PNG or JPG image to save the screenshot.

  Maybe it's possible to get to code in the userChrome.css file to make it better.

  • http://KB.mozillazine.org/userChrome.CSS
  • http://KB.mozillazine.org/Editing_configuration

• Satellite A200: Cannot properly use external USB devices

  I encountered a problem with my Toshiba laptop and I can't fix it, and I'm in need your help please...
  The problem is that when I connect a USB portable device (an external hard drive, USB, iPod, Flash memory... etc) with more than 8 GB of memory...
  It is not properly installed in the Device Manager and appears under "USB bus controllers.

  But it does not say that it is an unknown device. It normally appears with his name, but he is not properly installed (it does not say that either) where it is supposed to be a camera under "imaging devices" in a specific category (hard drive under "drives"), and so on

  And I can't use the unit because the HARD disk does not appear in 'My computer' and my iPod cannot be used

  I would like to inform you that this problem is with all USB devices with more than 8 GB of memory.
  Not a single device. I tried a lot of features to ensure that it is not a problem with the unit.

  So this is a problem with my laptop and I installed Windows several times but no progress.
  Thanks for your help in advance...

  Is it XP or Vista?

  If its XP, make sure you have at least Service Pack 2.
  This hotfix can help XP see large capacity media:
  http://support.Microsoft.com/kb/934428
  but that doesn't really affect USB external HDD.

• "The backup file contains unrecognized data and cannot be used.

  Original title: - what are MS provides a BKF recovery tool? "The backup file contains unrecognized data and cannot be used.

  I'm trying to restore BKF files created by NTBackup.exe after the crash of a hard drive running XP Pro. The new hard drive is the same brand (WD) goes into the same computer Dell Inspiron and the same OS. No catalog file is available and trying to recreate the NTBackup recovery gives an error message.  No catalog cannot be created for many, but not all of my backup BKF files.

  I do not consider the solution of SysTools $89 for a large part of the answer. This problem is not uncommon and I hope MS has or can tell me a free tool to allow me to restore from any of my BKF.

  Thank you.

  You can take a look here: http://www.fpns.net/willy/msbackup.htm#NTBKUP

  I have no information other than what is on the web page.

• Error msg "this disc cannot be used to store a picture Windows complete PC backup because it is not formatted with NTFS.

  Original title: what is NTFS?
  When you try to do a full up, I get the error msg "this disc cannot be used to store a picture Windows complete PC backup because it is not formatted with NTFS.  My OS is Windows Vista Ultimate Edition.

  What is NTFS?

  What type of disc to I use to make a backup?

  Hi Heather_604,

  There are two ways you can do: you can convert the external hard drive to NTFS, or you can format the external hard drive to NTFS.

  Personally, I suggest that you format the external hard drive, but this will remove all data from the drive. Temporarily, you can copy what is on the hard drive on your C: drive if you have enough free space (or DVD) - once the external hard drive is formatted NTFS, you can copy everything back.

  Formatting disks and drives
   http://Windows.Microsoft.com/en-us/Windows-Vista/formatting-disks-and-drives

  Examine everything under view all. also check How can I add a new HDD? If Vista not recognize the external drive in see computer management - disk, the link create and format a hard disk partition management:

  Create and format a hard disk partition
   http://Windows.Microsoft.com/fr-FR/Windows-Vista/create-and-format-a-hard-disk-partition

  If you want to convert the external hard drive to NTFS, see the link in my original answer and:

  Convert a FAT32 to NTFS disk in Windows Vista
   http://News.Softpedia.com/news/convert-a-FAT32-disk-to-NTFS-in-Windows-Vista-51792.shtml

  Converting an external hard drive to NTFS
  (see r. v. White second after correction of typo in his post punch)
   http://Forum.Soft32.com/Windows/convert-external-hard-drive-NTFS-ftopict341077.html

  If you convert the drive to NTFS, I always recommend that you copy the existing data, as I described for the formatting of the disk, just in case...

  Kind regards

• "Movie Maker project file cannot be used in this context.

  I have created a slideshow of photos with music. When I use Windows Movie Maker and continue to publish my movie. I chose to publish my movie to a DVD. Then Movie Makers boot me and open DVD Maker. I try to put some audio in the background of the menu and it won't let me I get a error that says "Movie Maker project cannot be used in this context..." The heck that means and how to fix it?

  Help!

  When you import a Movie Maker project file directly from the film
  Manufacturer in DVD Maker I don't think you can continue to edit.

  Could you publish (save) the Movie Maker project in the. WMV
  Film format and then import them saved. WMV to DVD file
  Manufacturer and add other source files.

  Windows Vista - publish a movie in Windows Movie Maker
  http://Windows.Microsoft.com/en-us/Windows-Vista/publish-a-movie-in-Windows-Movie-Maker

  Movie Maker Vista - Edition
  http://www.Papajohn.org/Vista-publishing.html

• When try to install the app in my new laption it displays the error "the product key you entered cannot be used to active windows on this computer".

  Original title: Activation of Windows 7

  Hello

  I have windows 7 Home premium dvd I bought from microsoft. When I tried to install the app in my new laption it displays the error "the product key you entered cannot be used to active windows on this computer".

  Please help me with this.

  Diagnostic report (1.9.0027.0):
  -----------------------------------------
  Validation of Windows data-->

  Validation code: 0
  Validation caching Code online: n/a, hr = 0xc004f012
  Windows product key: *-* - 8DTXM - 6FQ2H-BKDY9
  The Windows Product Key hash: tyrxnn4SwD4/dXymV2RGA4cQPHY =
  Windows product ID: 00359-OEM-9801782-52192
  Windows product ID type: 8
  Windows license type: COA SLP
  The Windows OS version: 6.1.7600.2.00010300.0.0.003
  ID: {1BCBE11C-A21C-46C6-99B2-41DA76B3FEFE} (3)
  Admin: Yes
  TestCab: 0x0
  LegitcheckControl ActiveX: N/a, hr = 0 x 80070002
  Signed by: n/a, hr = 0 x 80070002
  Product name: Windows 7 Home Premium
  Architecture: 0 x 00000009
  Build lab: 7600.win7_rtm. 090713 1255
  TTS error:
  Validation of diagnosis:
  Resolution state: n/a

  Given Vista WgaER-->
  ThreatID (s): n/a, hr = 0 x 80070002
  Version: N/a, hr = 0 x 80070002

  Windows XP Notifications data-->
  Cached result: n/a, hr = 0 x 80070002

  OGA Notifications data-->
  Cached result: n/a, hr = 0 x 80070002
  Version: N/a, hr = 0 x 80070002
  OGAExec.exe signed by: n/a, hr = 0 x 80070002
  OGAAddin.dll signed by: n/a, hr = 0 x 80070002

  OGA data-->
  Office status: 109 n/a
  OGA Version: N/a, 0 x 80070002
  Signed by: n/a, hr = 0 x 80070002
  Office Diagnostics: 025D1FF3-364-80041010_025D1FF3-229-80041010_025D1FF3-230-1_025D1FF3-517-80040154_025D1FF3-237-80040154_025D1FF3-238-2_025D1FF3-244-80070002_025D1FF3-258-3

  Data browser-->
  Proxy settings: N/A
  User Agent: Mozilla/4.0 (compatible; MSIE 8.0; Win32)
  Default browser: C:\Program Files (x86)\Google\Chrome\Application\chrome.exe
  Download signed ActiveX controls: fast
  Download unsigned ActiveX controls: disabled
  Run ActiveX controls and plug-ins: allowed
  Initialize and script ActiveX controls not marked as safe: disabled
  Allow the Internet Explorer Webbrowser control scripts: disabled
  Active scripting: allowed
  Recognized ActiveX controls safe for scripting: allowed

  Analysis of file data-->
  [File mismatch: C:\Windows\system32\wat\watadminsvc.exe[Hr = 0 x 80070003]
  [File mismatch: C:\Windows\system32\wat\npwatweb.dll[Hr = 0 x 80070003]
  [File mismatch: C:\Windows\system32\wat\watux.exe[Hr = 0 x 80070003]
  [File mismatch: C:\Windows\system32\wat\watweb.dll[Hr = 0 x 80070003]

  Other data-->
  Office details: {1BCBE11C-A21C-46C6-99B2-41DA76B3FEFE}1.9.0027.06.1.7600.2.00010300.0.0.003x 64*-*-*-*-BKDY900359-OEM-9801782-521928S-1-5-21-1079193163-3130481270-3640039680Dell Inc.. Vostro 3558 Dell Inc.. A01 20150209000000.000000 + 000E9BB3607018400FC04090409India Standard Time(GMT+05:30)03109

  Content Spsys.log: 0 x 80070002

  File: No.
  Version: N/a, hr = 0 x 80070002
  WgaTray.exe signed by: n/a, hr = 0 x 80070002
  WgaLogon.dll signed by: n/a, hr = 0 x 80070002

  The following files are available for download from the Microsoft Download Center:

  For a 32-bit version of the Windows Installer update for Windows 7 for x 86 based systems (KB971033)

  http://go.Microsoft.com/fwlink/?LinkId=150841

  or if you have a 64-bit version of Windows

  Install update for Windows 7 for x 64-based systems (KB971033)

  http://go.Microsoft.com/fwlink/?LinkId=152411

  Source: http://support.microsoft.com/kb/971033

  Please, run again in normal mode and copy Microsoft Genuine Advantage diagnostic tool and paste the results into a response for further analysis:

  http://go.Microsoft.com/fwlink/?LinkId=52012

• Cannot connect using any user

  Original title:

  want to connect again? NO!

  Hello world

  I have a problem on my computer and I wanted to share it with you all, because Microsoft in my country could not help so maybe one of you has the solution.
  A few days ago, when I turned on my computer and when I log on, Windows (I have Windows 7 Ultimate, SP3, 2009.) has accepted the password and there was the home screen and then a black screen with my courses that I could move and then suddenly, he returned me to the login screen. I tried with different users but it starts spinning me without even seeing the office... There was no warning that my password was wrong, and I also did some scans with all the antivirus I have in safe mode but nothing. I tried to be as detailed as possible, and if anyone has another question, he may request. I hope that someone of you all can help. I posted this safe mode with network because I can't access my account (user) while having the problem that I have explained.

  Thank you all,
  William :)

  1. you say you know the password which is log you in, but immediately connects you back out.

  2. There is no system restore point to return.

  3, but everything works in Mode safe mode with networking.

  4. If the Virus/Malware has done this, he would normally ask a password that you did not connect in Normal Mode and you would get rid of him by doing what you were doing. scanning in SM with N.

  @@@@@@@@@@@@@@@@@@@@@@@@@@@

  Make your own information system repair disc in this tutorial:

  "How to create a Windows 7 system repair disc"

  http://www.SevenForums.com/tutorials/2083-system-repair-disc-create.html

  "This will show you how to create a system repair disc Windows 7 to be able to use to start the system recovery options to help recover your Windows 7 installation, if you have not a Windows installation disk, can't find your Windows installation disc or can not access the recovery options provided by your computer manufacturer.

  A system repair disc is not able to install Windows 7.

  Note

  If you are unable to start your Windows 7 to create a Windows 7 system repair disc, and then you could create on another computer for use on your computer. »

  _____________________________________

  Then, use this disk for System Recovery Options:

  "System recovery options".

  http://www.SevenForums.com/tutorials/668-system-recovery-options.html

  "How to run a startup repair in Windows 7"

  http://www.SevenForums.com/tutorials/681-startup-repair.html

  _______________________________________________

  If this fails, back up your data in Mode safe mode and reinstall.

  See you soon.

• How to open a word from a subroutine of javascript document by using the OPEN method?

  Hi everyone and thanks for your support!

  I created a Web site that uses a subroutine in javascript to open a WORD document. This is part of the code that I use in my PC (... and works perfectly).

  I understood from my reading that Microsoft Word is waiting for the absolute path to the file, reason code why you see the text following that, once again,.

  works fine in my PC:

  ***

  obj=w.documents.open('c:\\Users\\Owner\\Desktop\\pitutor314_1\\parent_agrm_sp.docx');

  ***

  But when I download my files (of work) for the server that hosts my website (GoDaddy), I have to change the absolute path in my

  original files to a new path, now showing the absolute path on the server. This is what my subroutine looks like after the

  corrections:

  ***

  obj=w.documents.open('/home/content/43/9663143/HTML/parent_agrm_en.docx');

  ***

  This new path has failed. I tried to change "/" "------" or "-", but these corrections did not work too.

  Please help me to be able to open a Word document of my javascript subroutine residing on my host server. Thanks in advance.

  See you soon

  Pitutor314

  Hi,

  The question you posted would be better suited in the Java programming Forums.

  I would recommend posting your query in the Forums of Java programming.

  https://forums.Oracle.com/Forums/Forum.jspa?forumid=922

  I hope this helps.

• Program for creating Windows DVD cannot burn DVDs

  Program for creating Windows DVD cannot burn DVD due to can not find the DVD burner, free DVD burner disc see on the upper right. But my DVD drive with well with another burning program.

  Hello

  (1) have you made changes before the start of this issue?

  (2) you have the external devices connected to the computer?

  (3) what is the exact full error message?

  (4) is specific to the program the issue?

  Method 1: Clean boot

  How to set up Windows 7 to start in a "clean boot" State

  http://support.Microsoft.com/kb/929135

  Note: After a repair, be sure to set the computer to start as usual as mentioned in step 7 in the above article.

  Method 2: Resolution of the problems with creating a DVD-video using Windows DVD creation

  http://Windows.Microsoft.com/en-us/Windows7/troubleshoot-problems-with-creating-a-DVD-video-using-Windows-DVD-Maker

  For reference:

  DVD-video burning: frequently asked questions

  http://Windows.Microsoft.com/en-us/Windows7/DVD-Video-burning-frequently-asked-questions

  I hope this helps.