HP printer loses the duplex setting

Similar Questions

• My printer Brother Business Smart Pro Series loses the WLAN setting, once he falls asleep - I like to keep the setting?

  When my brother Business SMART pro series goes to sleep, he loses the WLAN setting and I have to enter the key again.  It's very embarrassing.  Any suggetions?

  When my brother Business SMART pro series goes to sleep, he loses the WLAN setting and I have to enter the key again.  It's very embarrassing.  Any suggetions?

  I had unplugged it so that the date had to be reset the printer.  I think that the value.

• Printing without the duplex printing accessory attached

  Hello

  Is it possible to remove printing accessory duplex (thing of type cartridge at the back) and still be able to print front? I tried to disable the option to double-sided printing and print without the accessory, but it did not work. By checking the forum for similar queries, it seems that there is a fair bit of people who have had problems with the automatic double-sided setting so maybe there is something to it, or maybe it's impossible?

  I can't find a storage unit for the printer and he won't fit in those I saw if I remove the double-sided accessory. As we do for most photo printing, I am pleased that on the rare occasion, I need to make two-sided printing, I can get out of storage and put back the accessory. Just need to make sure it prints without it on until I take it off.

  Thank you!

  SB

  The duplexer can be deleted, but it would need to be replaced by a non-duplexeur rear panel, who will lead the paper correctly.  What model of printer you have?  He came back with a plain Panel?  Most of the printers that have the standard duplex module do not have the plain rear flat panel...

• HP Deskjet Ink Advantage 6525: Printer loses the wireless connection after a few hours

  Hi all!

  Printer is connected and I see on the IP address screen. Desktop with Win7 and Ubuntu are used. After passing on the printer is working properly, but a few hours more later his inaccessible from the two systems. Printer indicates connection, I can see it in the router's web access tool, but it is inaccessible. I have to power off the printer, restart the router, then power on the printer - and it works. Not very comfortable.

  Someone knows how to fix this bug?

  Hi varspb and SteveB21.

  Thank you very much for your answers!

  Please take a moment to watch this video:

• Wireless Photosmart B110 printer loses the network by disabling?

  Whenever I have cut the power to the printer, I find that I have to reset the router anywhere again. The router is a dolls operating on Virgin cable service. The computer is a Medion on windows 7. I have reinstall the printer software that he cured while I went on a stop to test. However, when I used it a few days later he was at square one. Any ideas would be appreciated!

  I want to just say thank you for your help. I went back to the drawing board and downloaded the latest version of the software. Then he reset the router and the printer again added to the network. Pleased to say all seems well, after testing for the last week. I don't know what we're doing without these forums, keeping in mind that they are made up of people smart experiancd ready to give of their time at least competent.

• HP 6520 - printer loses the connection without reasons

  Hello

  I have a HP 6520, which worked without any problems for the last 6 months. In recent weeks, the wireless connection to the router/server has problems.

  The blue light is on, but suddenly my computer (Mac or CAP) does not see the printer any longer. I ran a few tests and it seems that the printer has a problem with the connection to the router... I need to turn and to restart. Then, he works at a print job. For the second job, it is idle again...

  Can you help me?

  Thank you

  Thanks for the reply of Francis!

  Looks like there might be an update on the router and something that were previously opened cannot be more. Please refer to the post check the anti-virus for blocked Ports and Timed scans of VisionAiry and it will notify all the ports that must be opened on the router. If you don't know how to open the ports yourself, check with your router company or Internet service provider for assistance

  Let me know if that helps!

  

  In support of Movember

• Kodak wireless printer loses the connection.

  I have an ESP 6150. I installed the software and it woked fine wireless. I reboot my computer and when I go to print, it gives me the error that the printer is not connected to the usb port and will not be printed. It's on my Vista laptop. My other 2 desktops with XP do not have this problem. Where I'm going wrong?

  Thanks for the instructions. I disabled the firewall and now it works.

• OfficeJet Pro K8600DN: OfficeJet Pro K8600DN. Win 10 refuses to see the duplex unit

  The printer is connected to a HP/Compaq PC 6300 Win 10. Fortunately, it prints monoface but Windows always responds with the message "the Document has been configured to print by using the Automatic Two-Sided Printing module, but module is not installed in the device. The document will print one-sided "." The duplex unit IS installed in the printer and works very happy for many years under WIndows XP and Windows 7 (but using a different computer). I tried to remove the printer and all its files, download a new complete system of driver HP (OJ_SF_K8600_140_408 - 4.exe), reinstalling without success. The properties of the printer show the duplexer "installed". Any ideas? (other that throw the printer and buy a new one!)

  Have heard by now the support of HP telling me:

  "I must inform you that the printer you are currently using is supported only
  up to Windows Vista operating systems. Therefore, to use this printer solution
  would be to install another operating system, another more ancient, such as Windows Vista, Windows XP,.
  Windows NT or Windows 2000 "

  Not even the Windows 7! that she will roll!

  My initial conclusion was correct, HP do not give something.

  Thank you all for your help, I will now look at other manuafacturers for my printing needs

• Can't seem to get the printer to the appropriate port to communicate with the printer Lexmark 2480.

  WndOws XP install problems with Lexmark X 2480 printer no cd

  Can't seem to get the printer to the appropriate port to communicate with the printer Lexmark 2480.  Downloaded, but prints blank pages.

  Hello, ColoChick,

  Your question must be posted in the hardware and drivers Forum.  Note the drop-down menus...

  http://answers.Microsoft.com/en-us/Windows/Forum/performance

  Search for drivers for your Lexmark printer.  The complete set is recommended for a full installation.

  http://support.Lexmark.com/index?http://support.Lexmark.com/index?locale=en&page=product&UserLocale=en_US&ProductCode=LEXMARK_X2480&focusedTab=downloads#2

  You can also try the universal print driver

  http://www1.Lexmark.com/en_US/software/UPD/index.shtml

  If possible, contact Lexmark for the installer of physical media (CD)

  Q: How can I contact the Lexmark parts?

  R: customer support is available Monday - Friday from 09:00 - 18:30 AND

  E-mail: * address email is removed from the privacy *
  Phone: 1-877-577-2787
  Fax: 1-800-258-4880

• HP Officejet Pro 8610: Cannot print from the HP ePrint app on the Internet

  Hello

  I try to print using the HP eprint on my Android mobile application. I am able to print using the WiFi on my phone but when on the go, the app will not find the printer. The eprint service works correctly since I can print when sending an email to my address of email eprint even when I travel but the application won't work when the printer of the Internet access. The printer is connected to a cable modem, wireless. Is there a way to print through the Internet using the HP ePrint app?

  Thanks in advance

  Well after I asked a few friends with iPhones and Android devices to print over the Internet using the application, I noticed that everyone could.

  So, initially, I reset the printer to the factory setting and reconfigured it. It has resolved all the issues I've had both with built in the application to manage as well as my phone. Now I can normally use the HP ePrint app on the internet and printing.

  As a side note, I downloaded an update of the firmware to the printer and most probably caused problems, but, as says the resolved all factory reset.

  See you soon

• HP OfficeJet Pro 8600 periodically loses the wireless connection

  I have a new printer HP 8600 settlement. It is configured as a wireless printer and most of the computers on my network are able to access very well.

  However, I have a server running Windows 2003 Small Business Server and it's hard to stay connected to the printer. The server is wired through an ethernet cable, the printer is configured as a configuration wireless w / an IP defined manually so that computers can easily locate the printer on the same IP address every time. I used Windows XP drivers to install the printer very well under Win2003SBS. When connected, it prints very well. But after awhile, the printer loses the connection with the Win2003SBS machine. Sometimes it prints, usually, is not. I have to reset the printer as if it is going into such a deep sleep, the server is unable to wake up the printer.

  In addition, the printer struggled to connect to shared folders on the server (more precisely, the function "scanner network"). If I go into Internet Explorer by using the browser from the server, then connect to the 8600 via the built-in web server, it won't work. Once the server is connected to the printer on the built-in Web server, the server and the scanner will be will recognize each other. It is a painful and tedious extra step and it will expire after a short period, after which the server and printer must be connected in the same way.

  All my computers/printers/faxes are connected to the same wireless Westell 7500 router. They should not have communication problems because they are all pulling IP addresses in the same area.

  Is there a way to make the server and the printer recognize themselves and stay connected? Am I wrong configured something? Thank you.

  Hi bluestreak363,

  I would change the Ethernet cable to make sure that you have a good solid connection and then download the software driver for Win Server 2003 on the link below.

  http://h10025.www1.HP.com/ewfrf/WC/softwareDownloadIndex?softwareitem=MP-106087-1&CC=US&DLC=en&LC=en&os=1005&Product=4323652&sw_lang=

• Photosmart 5515 - how to set duplex printing? and duplexing of the M/s word?

  I recently bought a Photosmart 5515 for my Mac.

  1. I want to set default printing as front / double-sided and need help because I do not see this as an option.

  2. I am using Microsoft word and can not select two-sided printing option - please can someone advise

  I trieds many forums, and it's a common problem. Any advice would be welcome, because I bought this to help reduce the amount of paper I use.

  Thank you

  Hello

  Follow the steps below to perform pprinting Duplex of Office for Mac:

  1. On the file menu, select print. The print window is displayed.
     NOTE: The print window might be minimized. Click the blue triangle next to the product model (Mac OS X 10.6) or the view details button (10.7) see all available parameters. To select the connection type click the lowest selection box - Copies & Pages.
  2. Select from the drop-down.
  3. Set the duplex option as liaison Long Edge (Portrait) or binding Long Edge (landscape).

  You can save the settings for later use by clicking predefined settings > Save settings as a preset.

  Kind regards

  Shlomi

• HP officejet j6480 prints duplex, even if the duplex unit is installed. any suggestions?

  I can print but the printer does not print duplex not. He claims the duplex unit is not installed, even though I have the double (or triple) checked to make sure it is installed. If I want to print two-sided I re - insert the paper.

  edmpca,

  Try these steps that should help you set up correctly:

  1. click on Windows icon () on the taskbar > Control Panel > printers

  2 right click on the printer icon.

  3. click on properties and then click on the device settings tab.

  4. click on the plus sign (+) next to Options installable to extend it if necessary.

  5. click on the duplex unit to activate the menu drop down.

  6. click on the dropdown next to the unit duplex, then select installed.

  7. click on apply and then click OK.

  Let us know if it helps. Good luck!

• HP Office Jet Pro 8620: IMAC loses the connection to the printer

  Computer do not print and seems to lose the connection to the printer. I deleted all printers and made a new connection to the printer. Printer address 192.168.0.14.  IMAC later loses the connection to the printer again. I look at address on printer and now is 192.168.0.15. Its done this several times. So why the printer continue to change its address? Is it possible to put it permanently?

  Think I fixed it now. Problem was that I also had to set the Configuration of DNS address. Of course although computer knew the address of the printer, he could not find the server (i.e. the router) don't understand everything, but seems to work now.

  Went to the printer the webserver integrated with my Web browser. On the network, wireless 802.11, IPv4 configuration tab, I already had the manual IP, the subnet mask and the default gateway. I need to go to the next Section under the DNS Configuration, select "Manual DNS Server", then fill in the news for "Manual preferred DNS server".

  AllOf the above address were extracted from the information sheet, you can print directly from the front panel of the printer. My son who is more Apple savy than I am, said that he did not understand why I had to put an IP address manual for printer even when that she would have remained the same.  I don't either, but just know whenever IMAC my wife lost the connection to the printer IP address had changed.  My router is built with the Modem cable provided by the company. It is perhaps part of the problem.

  So no, it seems to be fixed number. So if you set a manual IP address, make sure that you also specify a "preferred DNS server"

  Thanks for your help

• Why print preview and print lose lines of text from the image to the screen in the browser

  When I bring up (for example) a magazine article in my browser and you want to print it for future reference, print preview and printed image 'lost' lines of text between pages compared to the original image in the browser. For example: visit this link: http://www.pcauthority.com.au/Feature/408318, how-to-make-windows-admin-easy-with-powershell.aspx?eid=2 & edate = 20150828 & utm_source = 20150828 & utm_medium = newsletter & utm_campaign = weekly_newsletter & nl = weekly and select 'Print' from the menu. Print preview that appears - poster in portrait mode or landscape - loses one or two lines of text for the print version wraps useless. Where the missing text? pagination is not identical, and Firefox seems unable to handle it.

  I use a HP desktop with Intel i7 CPU 8 GB of RAM and Win 7 Pro SP1. Firefox is V40.0.3

  I do not see "imposed by the system of page breaks" encoded in this Web page. It would be difficult for an author of a Web page with an international audience.

  You use A4 paper, but what about those of us using letter-size paper? Page breaks may screw up page print to LETTER, from a Web site to THE like this.
  And what about the 'zoom' different levels? For printing which is called scale preview of Firefox and Page Setup print.
  I put systematically "modest" when printing to save paper, to keep the last page to only a few lines, or when the font size in print preview is too great (IMO) for printing on paper. And the size of police appeared to have worsened as monitor resolutions have gotten larger over the years.

  The only time wherever I lost lines of text between printed pages was when I was "pushing the limits" with the paper up and down / page margins. IOW, too small header / footer trying to get on each page as possible. By default, Firefox a. 5 "margins (left and right) with. 5 "header / footer (top and bottom margins) = letter-size paper. With 'A' type of paper using metric would be tantamount to the margins of 12.7 mm on all four sides. The /metric of inches "toggle" is with the size of the paper, the user has selected.

  Check the Page > margins & header / footer to see if you have the parameters of ~ 12mm or it they are smaller.