Program for creating Windows DVD cannot burn DVDs

Similar Questions

• When I burn a dvd for creating windows dvd I get sometimes a video the picture freezes but the sound contues

  When I use windows DVD maker I sometimes a video him freezes but the sound continues.
  I'm doing something wrong.

  When I use windows DVD maker I sometimes a video him freezes but the sound continues.
  I'm doing something wrong.

  ==========================================
  It could be a problem with the compatibility of your source
  files (photos, video clips, audio clips)... but also it can be
  worth a try to disable all filters before you burn the DVD.

  See the following article:

  How to burn DVDs with Windows DVD Maker
  http://www.7tutorials.com/how-burn-DVDs-Windows-DVD-Maker
  (scroll waaay down for...) What to do in case of problems)

• How can I move my movie from Director of windows for creating windows dvd

  I made my movie using the movie maker but cannot transfer to DVD was created to add the scene selection and menu title. Can anyone help?

  The following article might be worth a visit:

  "Import files into Windows Movie Maker"
  "Publish and burn a movie to a DVD.
  http://m-Lov.blogspot.com/2007/11/you-can-use-Windows-Movie-Maker-to.html

• Cannot create Windows DVD, burning the disc - Satellite L350

  Can someone help I'm on a Toshiba satellite L350
  I'm trying to burn a DVD with Windows DVD maker. It is the fourth I've done and the previous ones were all OK.

  I can't burn the DVD, I tried both types of disc and made about 10 attempts today.
  When I try to burn it starts OK then I get about 34% and get an error message

  I had two different error messages, it says "cannot create the DVD error unspecified.". "
  The other says "cannot create DVD catastrophic failure"

  As Akuma wrote, it can be a problem creating Windows DVD and has nothing to do with the functionality of optical disc drive. It is good to check the updates.

  Can you test the WEIRD feature using a different burning application?

• Creating Windows DVD won't finish burning

  From: pafos

  Problem - DVD burned with Windows DVD maker not fianalize Amend will be will not play back on normal household players

  After spending a considerable amount of time and money (on blank media) trying to produce a DVD that will play on my Panasonic player normal, that I gave up. If you Google this problem there are a lot of people out there with the same problem then why not can it be 'fixed' once and for all by SM.

  I tried to burn a slideshow of photo from Windows Live Photo Gallery, but she is spit out the disc at the end of 98.8%. R DVD plays perfectly on the PC but not the standalone player.

  I even tried to change the types of burners and media, but they all gave the same problem. The disc is not finalized.

  I can burn the DVD with the third-party software and these play fine, even, if I use XP pro, all is well so it's down to Vista I'm afraid. I have the latest version of Vista sp1 and all the drivers etc are up to date.

  In view of the foregoing can recommend a decent software that will burn DVD properly with Vista AND produce photo jpeg slide shows?

  Thanks in advance for any help

  Peter

  De : John Inzer

  (scroll down for some links that may help you with Windows DVD Maker)

  You can use Movie Maker or PhotoStory 3 to create slideshows.

  Photo Story 3 For Windows http://tinyurl.com/4f869 or...

  http://www.Microsoft.com/windowsxp/using/digitalphotography/Photostory/default.mspx (this is an XP application but many users report success works on Vista)

  The following freeware can be your solution to create video DVDs.

  DVD Flick

  http://www.dvdflick.NET/

  Be sure to read the Guide:

  http://www.dvdflick.NET/Guide.php

  If you have problems to download DVD Flick... try the following direct link:

  http://tinyurl.com/3wcglh

  or...

  http://voxel.dl.sourceforge.net/sourceforge/dvdflick/dvdflick_setup_1.3.0.2.exe

  Save the file to a folder on your hard drive and install from there.

  Tutorials:

  Tutorial DVD Flick

  http://beginwithsoftware.com/videoguides/DVD-flick-Guide.html

  Burn any Format video DVD PC

  http://www.freevideoworkshop.com/dvdflicktutorial.htm

  Windows DVD Maker:

  Windows Vista-

  Help and how: creating Windows DVD

  http://tinyurl.com/yusbhl

  or...

  http://windowshelp.Microsoft.com/Windows/en-us/search.aspx?=&qu=DVD+Maker

  Windows Vista-

  Windows DVD Maker: Burn a DVD-video disc

  http://tinyurl.com/38qgzd

  or...

  http://windowshelp.Microsoft.com/Windows/en-us/help/27a0225d-260e-4313-8a82-7c5253e93e6f1033.mspx

  Windows Vista - Burn photos and movies on a DVD-video disc using Windows DVD creation

  http://tinyurl.com/3xtcfs

  or...

  http://windowshelp.Microsoft.com/Windows/en-us/help/5633ddcd-46a8-4d8e-82E1-2506401a60261033.mspx

  John Inzer MS - MVP

  Digital media experience

  View

  This isn't a technical support

  I'm a volunteer

  Solutions that work for

  me I work for you

  Proceed at your own risk

  Another response of the community of Windows Vista discussion groups

• Creating Windows DVD gives me an error; not a supported file type, a TI could not be imported. It is a film of saved project. How should I do?

  Creating Windows DVD gives me an error; not a supported file type, a TI could not be imported.  It is a film of saved project. How should I do?

  Hi jsims313,

   

  Welcome to Microsoft Answers Forums.

  We would like to get more information about you to help solve your problem. You better, please answer the following questions.

  ·         What is the format of the movie saved project file?

  ·         When you get this error message?

  To publish and burn a movie to a DVD, you must have Windows DVD Maker, which is included in Windows Vista Ultimate and Windows Vista Home Premium. You also need a DVD burner.

  1. Insert a DVD recordable or rewritable Virgin into your DVD burner.
  2. Open a project in Windows Movie Maker.
  3. Click file, and then click Publish Movie.
  4. Click DVD, and then click Next. Creation of DVD Windows opens.
  5. All the steps to create a DVD using Windows DVD creation.

  Publish a movie in Windows Movie Maker

  http://Windows.Microsoft.com/en-us/Windows-Vista/publish-a-movie-in-Windows-Movie-Maker

  Halima S - Microsoft technical support.

  Visit our Microsoft answers feedback Forum and let us know what you think.

• What is easier and best program for creating and designing the Web site to Server2008R2?

  What is more simple and the best program for creating and Server2008R2 for FrontPage Web site design is no longer available? Or FrontPage is still available.  Thanks in advance.

  There is no more simple and best. You could get as many different answers as there are a people.

  Expression is the successor to FrontPage. Also take a look at SharePoint Designer if you're Leroux Microsoft product. And, they are not the easiest and probably not the best.

• Creating Windows DVD - burning is not the whole video

  Hello

  Hoping someone may be able to provide me with assistance.

  I added successfully 4 VTS_01 film of video files in a project using create DVD Windows, using windows Vista. I entered all the information and personalized menu to suit me. I then run the preview everything seems very well the film will play form beginning to end.

  Now hear is my problem.

  When I burn the project to a disk, it will go through the movements of code and finally burn to the disc. Once it is finished burning, the disc is ejected.

  I'm going to play in my DVD Player menus I have made show the 4 files ok and I play the movie. But he will play only the first 28 minutes of the film. I tried selecting other scenes that won't play in the menu of the scene and yet it just starts at the beginning and only run 28 minuets and start over.

  I tried to use the DVD + RW 4.7 GB and DVD-R DL 8.5 GB think my film can now be too big once I added the menu, that's why I tried the 8.5 GB. The film was initially recorded on the DVD + RW 4.7 GB until I ran across Windows DVD Maker. The original plays very well.

  There are no problems with the discs, burner or DVD play as I have tried several, also tested incentive.

  Is there something I'm not directly in the program? Believe if the files are not compatible at all why would be him coming up in Windows DVD Maker and I would like to twick the menu and burn?

  Hoping someone can help as my film is really great on the preview.

  Kind regards

  A

  You say you converted. WMP... I'm guessing that you
  has meant. WMV?

  The duration of 88 minutes should not be too long for a
  DVD, but the project may be too complex for your
  system resources. As a general rule, small projects
  have a better success rate.

  Did you add additional files to this project? MP3
  for example music files?

  What version of Movie Maker are you running?
  Vista Movie Maker 6 or Windows Live Movie Maker?

  If it is Vista Movie Maker 6... try disabling the filters
  Movie Maker... it can have some effect on DVD Maker.
  Reach... Tools / Options / Compatibility tab and turn off
  all filters / OK.

  If you continue to have problems with burning your video
  DVD... the following freeware can be worth a try.

  (FWIW) It's always a good idea to create a system
  Restore point before installing software or updates)

  DVD Flick
  http://www.videohelp.com/tools/DVD-flick
  (the download is: "dvdflick_setup_1.3.0.7.exe")
  (Download from (direct link) is the fastest).

  Save the file to your desktop or a folder on your
  hard drive and install from there.

  Be sure to read the Guide:
  http://www.dvdflick.NET/Guide.php

  Tutorials:

  Tutorial DVD Flick
  http://beginwithsoftware.com/videoguides/DVD-flick-Guide.html

  Burn any Format video DVD PC
  http://www.freevideoworkshop.com/dvdflicktutorial.htm

  AVI to DVD with DVD Flick Guide
  http://www.Digital-Digest.com/articles/AVI_to_DVD_using_DVD_Flick_page1.html

  To create a video DVD base that should play in most
  free-standing DVD players... try the following...

  First... read the DVD Flick Guide to familiarize
  with the program.

  Open DVD Flick and insert a blank DVD in your drive.

  If the window of Autorun from your computer... just close it.

  Click the project settings button and check... Video /.
  Target format... residents United States... Choose... NTSC /.
  Accept.

  The title button left click Add and navigate to your
  Video clips and select the ones you want on the DVD.

  You can have by selecting one and then use
  the up and down buttons.

  To allow a longer time on the DVD... left click the
  The project settings button / select video / open the target
  Bitrate of drop window. Choose a will more small number
  result in a longer time on the DVD. Press on... Accept.

  The vertical bar to the left of the screen will tell you
  How much compression you need.

  Left click on the button create DVD / OK / Yes / Yes.

  Please wait while the DVD is created.

  When the text "Completed successfully" is displayed you
  DVD Flick can close. Now you can eject your DVD
  and play in your DVD player.

  At some point you might want to buy more
  software advanced as Sony, Cyberlink, Nero, Roxio,
  Adobe, Ulead, etc... but at least it is a start.

  Good luck.

• Cannot create Windows DVD - create DVD

  I make this all on a Windows 7 64 bit. The DVD burner is turned on, work, etc. I have 251 GB of free space. The problem is that this error message is so worthless, that is no real details as 'out of space', 'codec error', 'invalid input file', ' Hey, I don't like you "... There is nothing to work with. The entrance is an AVI movie that plays fine in Windows media center. The point "just die for no apparent reason" seems to be 38% in Windows Media Center and 17% in Windows DVD Maker and the blank disc is hunted. If no other Microsoft must build a correction which exports at least some useful error messages on the process of failure so there is a direction to take. At least in DVD maker status has been "Coding" and he dies in this. Windows Media Center you said nothing, but the error wave.

  Oh, Yes, I tried again after a fresh reboot and spin anything else. The same problem.

  I make this all on a Windows 7 64 bit. The DVD burner is turned on, work, etc. I have 251 GB of free space. The problem is that this error message is so worthless, that is no real details as 'out of space', 'codec error', 'invalid input file', ' Hey, I don't like you "... There is nothing to work with. The entrance is an AVI movie that plays fine in Windows media center. The point "just die for no apparent reason" seems to be 38% in Windows Media Center and 17% in Windows DVD Maker and the blank disc is hunted. If no other Microsoft must build a correction which exports at least some useful error messages on the process of failure so there is a direction to take. At least in DVD maker status has been "Coding" and he dies in this. Windows Media Center you said nothing, but the error wave.

  Oh, Yes, I tried again after a fresh reboot and spin anything else. The same problem.

  =====================================
  I suspect a problem of compatibility with the .avi file.

  Convert the .wmv format before importing the .avi file
  in DVD Maker may be worth a try:

  The following freeware can be worth a try for the conversion:

  SUPER © Simplified
  Universal Player Encoder & Renderer
  http://www.videohelp.com/tools/Super
  (the download mirror site is faster)

  (FWIW... it's always a good idea to create a system)
  Restore point before installing software or updates)

  After installing the program GREAT... open...
  you will see two small circles at the top left
  corner of the screen... check the UPPER circle.

  You can experiment with the settings
  but the following steps should help you get started...

  Drag and drop your. AVI files/s in the current field.

  Output container... Choose... WMV

  Video scale size / no change

  Left, click the Encode button.

  Choice: A Simple Profile / OK...

  Wait... wait longer...

  (FWIW... I have better luck with video if I'm not
  try to multi-task while a file is being converted)

  When the file/s are converted... you should find the
  in... Program Files / eRightSoft / Super / exit.

  Or... you can type... CTRL + O.. o open the Save
  Window and choose a backup folder.

  Good luck...

  Volunteer - MS - MVP - Digital Media Experience J - Notice_This is not tech support_I'm volunteer - Solutions that work for me may not work for you - * proceed at your own risk *.

• Creating Windows dvd will not burn dvd

  My new computer has windows 7. I used the windows dvd creation when I had vista and it worked then. I burned my discs of recovery on this computer without problem. When coding is about 3.3%, it climbs to 24, then 99, and then I get the error message that an error has occurred when burning the dvd. According to the graph, I 16 minutes left space on the disk. I tried to use two different disks and that has not worked. I changed the write speed to slow down with no luck. I have disabled the video filter on the tab options. I don't know what else to try. I use DVD + R Philips discs. Are there other options in addition to try a different type of manufacturer or disc?

  I tried to convert the original file of realplayer and the encoder said the file type was not supported I tried convert the wmv file, I created from the realplayer file using the WMV converter. I received the message: error corrupted the file once more. I guess that there is not much left to try unless it might help to use another program to download Internet video?

  =====================================
  I'm running out of ideas, but the following free software
  Works for me... maybe, it would be interesting to try:

  (FWIW... it's always a good idea to create a system)
  Restore point before installing software or updates)

  Freemake Video Downloader
  http://www.Freemake.com/free_video_downloader/
  (Windows XP/Vista/7)

  They also offer a video converter that can burn a video DVD.

  Freemake Free Video Converter (freeware)
  http://www.Freemake.com/free_video_converter/
  (Windows XP / Vista / 7)

  Freemake free Video Converter - how to burn video DVDs
  http://www.Freemake.com/how_to/how_to_burn_dvd_video

  Have patience... video encoding can be a slow process.

  Good luck...

• Creating Windows DVD - can not detect the DVD burner.

  When I start Windows DVD Maker, my DVD drive on my Lenovo 64 bits Y460 can not be detected. When I click the selector drop down menu on the upper right corner drive, a blank is displayed. When I try to burn, the program says that a DVD burner can not be found, sign in, and then install etc... How can I fix it?

  You have a 3G modem or another attached flash drive? My Huawei modem was somehow interfering with Windows Media Center/DVD Maker detect my DVD burner. As soon as I unplugged the problem disappeared. If I reconnected it during the burn process, it does not immediately!

• Creating Windows Dvd encodes and burns, but the dvd is blank.

  * - Original title - when I put my movie in Windows Dvd Maker, it encodes and burns.

  . But when he ejects itself there is nothing on the disc it just says: disc... Why - what is happening to you, it has worked well in the past. Using Windows 7 please help?

  Hello

  1. What is the type of file that you burn in the disk?

  2. have you made changes on the computer recently?

  3. are you able to burn the disc using any third party CD or DVD burning software?

  Once you get a message that the burning is complete, check the size of the free space and space used on the DVD.

  For information about how to check the user-space and the free space, you need to right click on the DVD drive, and then click Properties.

  Well, it seems that when you burn a CD or DVD, the disc is not finalized.

  For reference.
  Close or finalize a CD or DVD
  http://Windows.Microsoft.com/en-us/Windows7/close-or-finalize-a-CD-or-DVD

  Burn a DVD-video using Windows DVD Maker disc: http://windows.microsoft.com/en-US/windows7/Burn-a-DVD-Video-disc-with-Windows-DVD-Maker

  I hope this helps.

• Help with creating Windows DVD longer is set to 16:9 but burn with 4:3

  Hello, I have a problem with the windows dvd marker. I burned two DVD until now and they all have two aspect ratio of 4:3 i have changed to 16:9 in the menu options, but each time its only 4:3. I tried to look on google how to fix this and I discovered that passing the AVI to WMV file type will be slove the problem. so my question is would this cause really work that I don't have much time to waste because the creation of dvd takes a long time to burn the dvd and I don't want to end up with 4:3, this time? so, if some can help me that would be very nice.

  Hi Akshaypatel,

  I suggest you follow the advice given by Mouneshwar R from the link below.

  http://answers.Microsoft.com/en-us/Windows/Forum/windows_vista-pictures/problems-burning-a-DVD/08ed2466-d74c-4719-9fdb-54dcc8607e80

• creating Windows dvd burning only the aspect 4:3, even when set to 16:9 ratio.

  Burns maker Windows dvd only the aspect ratio 4:3, even when the value 16:9.was ok in vista, but not the case in windows 7 too movie maker in windows 7 is garbage.this pure direct essential bundle is rubbish.why should set us up with that? I bet that there is no answer. tried to download older versions of movie maker work. but you get directed to this essential live bundle .any way this isn't the end of the world.as, I did a few dvd place pods...

  Always the same question on 8 January 2015. Windows Movie Maker produces video files in 16 / 9, but Windows DVD Maker that requires to 4:3 when burning a DVD, regardless of the settings.

  Again, I tried severale time and again on April 24, 2015, the ratio has to be 4:3!

  Too bad because I like the creation of DVD menu.

  I found the solution... very simple and it will work every time. before you burn the DVD with windows DVD creation, make sure you 'exit' your video to mpeg2 format, no matter what software you use to edit your videos, make sure you "output" your finished video in MPEG2 before burning with windows DVD maker

  MPEG2 is a DVD format that windows DVD maker recognizes and so it will burn your video ratio 16.9 this video will play on any DVD player. AVI WMV formats won't work even if you copy with movie maker then MPEG2... This is the key ~ MPEG2 ~ that's the secret.

  Unfortunately, Movie Maker stores projects only as MPEG-4 (.mp4) or Windows Media Video (.wmv).

  If your solution is another problem. We should convert mp4 or wmv in MPEG-2, how?

  Why Windows has no simple and direct way to burn DVD screen wide ratio?

• Creating Windows DVD section at 8 seconds long video

  I TRIED HARD FOR THE LAST TWO DAYS TO PRODUCE A DVD OF MY DAUGHTERS IN MARRIAGE TO AID CREATION OF WINDOWS DVD. WHILE TRYING TO ADD A .99GB A VIDEO FILE WHICH IS APPROXIMATELY 25MINS THERE HE CUT DOWN TO ONLY 8 SECONDS. SOMEONE DOES HE HAVE IDEAS PLEASE!

  The following article might be worth a visit:

  How to burn DVDs with Windows DVD Maker
  http://www.7tutorials.com/how-burn-DVDs-Windows-DVD-Maker
  (scroll down for...) 'What to do if you have questions')

  If that does not improve the issue, you can have one
  compatibility issue with the format of the video file.
  Convert the video file to the. WMV format before
  import in DVD Maker may be worth a try:

  There are many programs that can do conversions...
  The following freeware is an example...:

  (FWIW... it's always a good idea to create a system)
  Restore point before installing software or updates)

  Format Factory
  http://www.videohelp.com/tools/Format_Factory
  (the 'direct link' is faster)
  (the file you want to download is: > FFSetup260.zip<>
  (FWIW... installation..., you can uncheck
  ('all' boxes on the last screen)

  First, you will need to decompress the file or just open the
  Drag FFSetup260.exe out of the folder
  and drop it on your desktop. To install left click.

  Next, after the download and installation of Format
  Factory... you can open the program and
  left click on the toolbar, the "Option" button and
  "Select an output folder to" / apply / OK.
  (this is where you find your files after they)
  are converted)

  Drag and drop your video clips on the main screen...

  Select "all to WMV" / OK...

  Click on... Beginning... in the toolbar...

  That should do it...

  Good luck...