Boolean to increment a counter

Similar Questions

• I want to rename and move files from a shoot 5 d. I would like to use the functionality of the increment to count, but since I have to get out of each file to the following file, it starts again at 1. What is the best way to do it?

  I want to rename and move files from a shoot 5 d on a new drive. I would like to use the functionality of the increment to count, but since I have to get out of each file to the following file, it starts again at 1. What is the best way to do it?

  HI -.

  As a prelude to 2014.0, we have added a feature allowing you to choose what number to start the increment of.  Look in the section ingest Rename dialog and change your preset. When you click the button, you should see the option "Custom Auto Increment". This will allow you to choose what number to start on.  We've also added a few newspapers to try to remember where let prelude last successfully interfere the operation by using this option. So, in theory, to remember the number for you. But if it isn't (maybe you want multiple kickoff ingested at the same time) you can always manually set the number to start with.

  Check that out and let me know how it works for you.

  Kind regards

  Michael

• Using a value Boolean true to increment a counter

  Hello world

  I would like to make a simple counter that waits just until a value Boolean true is passed and account 1, then wait until it happened again and goes up to 2 and so on. Just a single increment each time a real rose. I'm sure it's pretty simple, but I had no luck so far.

  Who does not resemble a need for a secondary loop.  You can add code to this loop to analyze the data.  If you do the calculations to determine a true, you already do the job.  Instead of going out a real, just increment a value of a shift register it.  Saves the hassle of sending one real constant for another loop for updating a shift register.  Do not create excess code just to have more code.

• How do I increment my counter in the ES4 Designer?

  I have a numeric field, called Provider_Index, a default value of "1".  I need the numeric field to increment by 1 whenever I click on the button "AddAdditionalProvider."  Below is the current syntax associated with the button, but the meter is not incremented.

  Suggestions?

  Form1. EXP_Sample_Form.buttons.AddAdditionalProvider::change - (FormCalc, client)

  if (xfa.host.version < 8) then

  RawValue EXP_Sample_Form.Bottom_of_Form.Provider_Type.Provider_Index.RawValue = + 1

  endif

  Hello

  Sorry for the delay.

  If looked at your form and have the following improvements.

  I did not understand the logic of any form, because it is quite complex and it would take hours for me to understand everything... so I can't fix your first request here.

  In short, this is what I can offer you up to now:

  First, the meter can be created much easier. Just count the number of instances of the repeated subform that surrounds your count field.

  So I would like to use the script in FormCalc following in the calculate of Provider_Index event.

  $.parent.parent.index + 1
  

  Second, the buttons of script to add new instances of the Bottom_of_Form subform.

  The builders actions script is medium to complex and can be deleted.

  Also remove the buttons change event script, it make no sense here.

  Then add this FormCalc script in the button click event. Make sure you use FormCalc, because JavaScript does not allow wildcards as [*] meet all instances of an object.

  EXP_Sample_Form._Bottom_of_Form.addInstance(1)
  EXP_Sample_Form.Bottom_of_Form[*].presence = "visible"
  
  ; this part is only needed if the form will be used in Acrobat or Reader 7. Otherwise you can delete it.
  if ($host.version lt 8) then
            $form.recalculate(1)
  endif
  

  I hope this helps.

• How can I increment a counter on a Master Page?

  I work on a very complex shape and hit the proverbial wall. I downloaded the file at the URL below and looking for assistance during the completion of the form.

  Here's the URL for the file.   https://workspaces.Acrobat.com/?d=66B5k8981-WUNHJB1epZXg

  There are three challenges remaining.  When I click on the "Click to add Service location" button at the bottom of page 2:

  1. I need to add an instance of 'Service_Location_Page' on the next page.  Currently, it is added before the page that I just finished.
  2. I need the value of "Service_Address_Type" on page 2 to change the default value of "Primary" to "Secondary" to the new instance of "Service_Location_Page" and all subsequent instances.
  3. I need the meter "Service_Locaton" at the top of page 2 to increase of + 1 for each new instance of "Service_Location_Page".

  Suggestions for improvements will be greatly appreciated.

  Anokie1

  The link is not accessible.

  Anyway, did you put the script in the Service_Location_Page indexChange event and you have selected FormCalc language in the script editor?

• Incrementing counter on stage through the class

  Hello everyone, I have a thread similar to this on the saving and loading of a meter. However, I can not get the counter increment when colliding with an object. When the collision with the object, it makes not visible so that you can not see more.

  My meter that records and load looks like this:

  var so: SharedObject = SharedObject.getLocal("myStuff","/");

  var JumpCounter: int = 0;

  If (SO. Data.JumpCounter)

  {

  JumpCounter = so.data.JumpCounter;

  }

  And when you jump:

  JumpCounter ++;

  so.data.JumpCounter = JumpCounter;

  so. Flush();

  It outputs here in a text box:

  JumpBox.text = JumpCounter.toString ();

  This set works very well, I just can't get it to increment when colliding with my MovieClip.

  I have a class that looks like this attached to my MovieClip I want to increment which looks like this:

  package {}

  import flash.display. *;

  import flash.events. *;

  SerializableAttribute public class AddJumps extends MovieClip {}

  build function

  public void AddJumps (): void

  {

  addEventListener (Event.ENTER_FRAME, collision);

  }

  private void collision(e:Event):void {}

  If (this.hitTestObject (MovieClip (root). (Player)) {}

  MovieClip (root). JumpIcon.visible = false;

  }

  }

  }

  }

  I'm not sure access to the or increment my counter to a category. I can't remember how to access the scene.

  Thanks in advance!

  It's the only part that you add to your class:

  MovieClip (root) .incrementJumpCounterF ();

• Count of analog shooting

  Hello

  I try to use the edge detection analog to increment a counter, I'll read then leave at regular intervals. I keep hitting brick walls trying to perform/adapt the examples on the site of NOR.

  I use a cDAQ-9174 chassis and a map of analog input of NI9223 with LabVIEW 2014 SP1.

  Any suggestions would be greatly appreciated.

  Thank you

  Emach

  Hello Emach

  First, I'll share with you a link where you can see the function each device can therefore use, see below:

  http://zone.NI.com/reference/en-XX/help/370471Y-01/TOC40.htm

  http://zone.NI.com/reference/en-XX/help/370471Y-01/cdaqmxsupp/ni_9223/ (For 9223)

  On the other hand, I thought that you can create a VI when you do the analog signal acquisition and when that signal has a specific value, you can increase a counter (by software).

  Concerning

• Increment of 1 digital input

  Hello

  I'm doing a 1 by 1 meter with a digital input of my acquisition of data. I have a sensor connected to the digital input string and when it is activated, the program is supposed to increment a counter to 1. However when the sensor is activated, the counter takes account on and on (very fast). I want that it count only 1 with every pulse.

  I've tried everything I can think of, structure of matter, structure of the event, collector of signal sequence... but with no result. Is there a way to limit the number?

  Thanks, I hope someone can help

  You really need an edge detect.

  

• How continually increment while the mouse click now

  The attached VI increments a number to each mouse click.  Is it possible to increment permanently with the structure of the event and now the click of the mouse?  For example, if I want to increment the counter from 1 to 100, I don't want to have to click the mouse 100 times, I just want to click once and hold.

  Here's a slightly simplified version which removes some code duplication.

  (Note that both Tim and I have placed before the structure of the event mark.) This eliminates the need for the reset operation).

• How to count the number of clicks: a user makes? + Penalized if too many

  Hi all

  I have a video where the user needs to search for objects. It should click when an object is in the video. I created click boxes during the opportune times.

  What I do:

  I count the number of clicks and display it below the video. So, for example when a user clicks on an icon at the bottom of the video. If he clicks 5 times more, there are 6 icons in a row. Too much pressure, I can say that the user is cheating and give him a score of 0.

  Anyway to do this?

  The first decision is to increment the counter by 1, sorry, typed too fast should be:

  Increment of 1 V_counter

  You should see that the syntax when you created the first decision. This means that each click will add 1 to v_counter, the reason why it must be the first decision. Only indicator related to the value of v_counter must be added, given that the previous indicators are already should have been disclosed with the previous clicks. This conditional action must be triggered by the success of the click box. Because it takes several clicks, is expected to try it myself, was little crowded today. Apology.

  You add new information now: what do you mean by "conditional login?

  If you need to partition must be reported to an LMS (still do not know which), you should know that all quiz system variables are read-only. This means that the maximum score is set at the beginning of the tutorial. You can attach a note to each interactive object. Probably the best way would be to add a button next (with a break point after the click box), who will get a score. Since you want a penalty when v_counter is greater than 5, you will need to use the following two buttons: one with a score = 0 and the other with a score = X (points you want to give). If you put the beginning of the chronology of these buttons just after the timeline of the click box, you can add a final decision to the advanced conditional action that will check which button to display. If I label the value 0 has marked button "Bt_Next_0" and the version marked "Bt_Next_points" that last decision is:

  IF v_counter is greater than 5

  Disable Bt_Next_points

  Hide Bt_Next_points

  See the Bt_Next_0
  Select Bt_Next_0

  ON THE OTHER

  Disable Next_0

  Hide Bt_Next_0

  See the Bt_Next_points
  Select Bt_Next_points

• Increment, County and run and action

  I need a button to increment a counter and then run a conditional. Is it possible to do this?

  You must use conditional shares advanced in this case.  You can have a decision block initial that increments the counter variable, followed by an another decision block that checks the values of the other variables involved and then decide whether or not to show the next button.

  Conditional decision blocks and Actions are all explained in the pages that you can reach from this link I gave you above.  It is also in the e-book with examples of files CPTX.

• Value of the increment on click

  Hello.

  I use 8 Captivate and created a delicate design project.

  Created a slide where there are 5 images and a "basket" in the top corner.

  The user must select the 3 images that are the right choice. Whenever they choose an image, the cart updates a value (1, 2 or 3) and the image that they selected and then fades or fades.

  I can't figure out how to set actions to get there.

  The images were to be buttons to give them shares.

  Buttons create an action on and what the parameters of the actions must seem to have these things that multiples occur?

  

  Create a v_counter user variable that you can display in a container of text on the cart. The default value of 0. For the correct form button (I guess those who are filled with images used as buttons on forms?), you can create a shared action that increments the counter (not a setting) and apply an Alpha effect to the button itself, or (perhaps more trustworthy than the effect) replaces the original image button by a same shape with a faded image (not a button at the same time (, you will avoid they click a second time on the same button).

  You don't say what should happen with no correct images?

• Mechanism of Oracle to the field always increment by 1

  Hello

  Is there is no built-in mechanism for Oracle to ensure that the fields will always increment by 1? I tried with the sequence but it only ensure that this counter is unique, but not a guarantee which is always increment by 1.

  If it is imposible for Oracle, please just said I have to implement my own (I am beginner as developer Oracle). Thanks for the suggestions.

  Best.

  A simple question, you have to deal with this scenario

  1 the user assigns the value N

  2 the user must wait before they can allocate the value N + 1 - in which case your entire system is single-user.

  2 the user can allocate N + 1 before commitments of user 1 - if so, how to retrieve the value N if the user falls down after 2 user agrees?

  A strategy (which I described in "Practice Oracle 8i") would be to connect to a value, and then remove the paper as part of the transaction that uses it. If your condition is auditing you have then a trail that shows ALL the values - the table operation, or the table of newspaper as "allocated but unused.  You cannot use Oracle sequences, you must have a 'table of the sequence' to contain the name and the value the more recent, and you must increment the counter and put it in the newspaper through a stand-alone transaction table. You also need a trigger on the table to remove the entry from the table in the transaction log.

  Concerning

  Jonathan Lewis

• Library cache pin and Mutex Ref count

  I understand that concurrency library cache is managed by library cache pin, and a session must acquire a PIN after blocking, now from 10 g Mutex (cursor: PIN) has replaced the locking pin: library cache. Now the cursor: hand S is incremented when another process is updating the reference (PIN) of a shared cursor count, it is in fact rather than sleep until the mutex is available, my confusion is that before this implementation of ByRef count which is effective, library cache latch was removed and assigned whenever the cursor was executed which was shared of course , now with Ref count each sessions only and only by increments and decrements without deletion and by allocating a memory lock (latch: cache library).
  
  Now what brings to my mind, is that for this mutex, it can be referenced at the same time many sessions, providing that all sessions of reference the mutex in S (shared Mode). So if they can refer to the mutex at the same time I don't think there should be any event queue unless just pending session increment counter Ref, so another question is can multiples at the same time run the cursor with the cursor: pin S. And I think that no. assume the session A, B, C wants to share a C1 cursor, they want to execute all this slider, now a, b and c session I think run independently of this slider, at different times, time, they have the chance to increment the counter of REF. Please remove my confusion, it is a humble request.

  842638 wrote:
  I understand that concurrency library cache is managed by library cache pin, and a session must acquire a PIN after blocking, now from 10 g Mutex (cursor: PIN) has replaced the locking pin: library cache. Now the cursor: hand S is incremented when another process is updating the reference (PIN) of a shared cursor count, it is in fact rather than sleep until the mutex is available, my confusion is that before this implementation of ByRef count which is effective, library cache latch was removed and assigned whenever the cursor was executed which was shared of course , now with Ref count each sessions only and only by increments and decrements without deletion and by allocating a memory lock (latch: cache library).

  Now what brings to my mind, is that for this mutex, it can be referenced at the same time many sessions, providing that all sessions of reference the mutex in S (shared Mode). So if they can refer to the mutex at the same time I don't think there should be any event queue unless just pending session increment counter Ref, so another question is can multiples at the same time run the cursor with the cursor: pin S. And I think that no. assume the session A, B, C wants to share a C1 cursor, they want to execute all this slider, now a, b and c session I think run independently of this slider, at different times, time, they have the chance to increment the counter of REF. Please remove my confusion, it is a humble request.

  I think you see the mutex as an object 1/0 a session must value 1 while it running the cursor. It's actually a counter that a session increments when it wants to run the cursor and decremented when it has finished execution. This means that if you want to run a cursor when the meter is already worth 5, we will both try to set to 6 - one usage will succeed and start execution of the cursor, the other fails but recognize that the meter is now 6 and set it to 7 before execution.

  To get detailed information about locks, mutexes and the differences between them, there is no better source of information at http://andreynikolaev.wordpress.com/

  Concerning
  Jonathan Lewis
  http://jonathanlewis.WordPress.com
  Author: core Oracle

• How can the value of the increment on stage?

  Hello

  I'm doing a game where, when the user presses a button it increments a score on stage.

  So far, I put a text field on stage with the counter name:

  set the value of a variable symbol

  sym.setVariable ("score", "0");

  SYM.$("counter").html (sym.getVariable ("score"));

  How to code a button to increase this score every time on it?

  Thank you

  Very close, but not quite.  You will need to increment your counter and then store it so that it continues to increment.  A good example of this is in the sample of the Cracidae Catch on the site to animate:

  http://HTML.Adobe.com/edge/animate/showcase.html

  More specifically, it's what I would do:

  1. in compositionReady, initialize the variable like this:

  sym.setVariable ("counter", 0);

  2. in your scenario where you get a point:

  var counter = sym.getVariable ("counter");

  counter ++;

  SYM.$("counter").html (Counter);

  sym.setVariable ("counter", counter);

  -Elaine