boot device now

Similar Questions

• I screwed up trying to install windows on my computer 10 and I XE off installer and now its says "no boot device - insert boot disk and press any key".

  I was just trying to download 10 on my computer windows using boot camp assistant. I answered the questions for windows when you need to respond as what kind of language you use and then I messed up on one of the questions. I didn't know how to go back so I just pressed the red x. When I did that he must get off my computer and when it's done I got a black screen and then it says "No boot device - insert boot disk and press any key" I don't know what he meant by no bootable disk and I was hoping that you guys can help me fix.

  If stop you your Mac and your power it back up and hold down the Alt/Option key, you see a Windows selection? If so try to select and see if the installation will continue.

• El Capitan "Don't Update" no boot device

  Hello

  I've updated updated my MBP 2011 end of El Capitan, and now I'm unable to start Windows. The Bootcamp partition is always visible in disk utility, but if I try to start it I get a response of "no boot device."

  Here is my disk configuration:

  

  You can use Re: [help] can't start Windows (8.1) after partition resizing as a reference and rebuild your MBR using GPT Fdisk?

  GPT Fdisk is available at https://sourceforge.net/projects/gptfdisk/ .

• Boot camp is no boot device

  Hello community,

  I used to read every forum/discuss before posting, so it's the first time here.

  My config:

  Mac pro 3.1 2008 / Mac osx 10.11 / Boot camp 5 / windows 7 update to windows 10

  I have installed since a year now Bootcamp, windows told me I was able to update windows 10, and they were little good cause I managed to update without any problem, I used windows 10 for a month and have never encounter the difficulties in moving an OS x and windows.

  But yesterday, I needed to format my disk HARD school wich has been used for time machine. Time machine has been disabled for months (because it was full and keeping saying that it was impossible to save) and I needed a free space to use with Windows 10.

  I deleted and format FAT32, this secondary hard drive, so I could not boot into windows, keep showed a black screen with flashing white guest and not any something key.

  If I go to select a restart from a drive, I can choose OS x or bootcamp.

  I can see my partition boot camp on OS X with all data still there, but when I push the button option at the beginning, I have only 2 choices: - Mac OS X - or - restore 10.11 - I don't see my windows startup.

  I tried to download parallels desktop to see if he is able to start my training camp. But parallel shows me "no boot device."

  Can someone help me?

  Thank you.

  Here is some information on installed drive:

  diskutil list

  / dev/disk0 (internal, physical):

  #: NAME SIZE TYPE IDENTIFIER

  0: GUID_partition_scheme * GB 500,1 disk0

  1: disk0s1 EFI EFI 209.7 MB

  2: Apple_HFS Macintosh HD 350,2 GB disk0s2

  3: disk0s3 Apple_Boot Recovery 650.0 MB HD

  4: Microsoft database BOOTCAMP 149,0 GB disk0s4

  / dev/disk1 (internal, physical):

  #: NAME SIZE TYPE IDENTIFIER

  0: GUID_partition_scheme * GB 160.0 disk1

  1: EFI EFI 209.7 MB disk1s1

  2: Microsoft database disc2 159.8 GB disk1s2

  / dev/disk2 (external, physical):

  #: NAME SIZE TYPE IDENTIFIER

  0: FDisk_partition_scheme * 4.0 GB disk2

  1: DOS_FAT_32 DISK_IMG 4. 0 GB disk2s1

  ________________________________________________________________________________ ___

  sudo fdisk/dev/disk0

  Disk: geometry / dev/disk0: 60801/255/63 [976773168 sectors]

  Signature: 0xAA55

  From end

  #: cyl hd s - cyl hd s id [Start - size]

  ------------------------------------------------------------------------

  1: EA 1023 254 63 - 1023 254 63 [1-409639] < unknown ID >

  2: AF 1023 254 63 - 1023 254 63 [409640-684078336] HFS +.

  3: AB 1023 254 63 - 1023 254 63 Boot Darwin [684487976-1269536]

  04:07 1023 254 63-1023 254 63 [685758464-291014656] HPFS/QNX / TO THE

  ________________________________________________________________________________ __

  sudo TPG - v - r see the/dev/disk0

  See the TPG: / dev/disk0: mediasize = 500107862016; SectorSize = 512; blocks = 976773168

  See the TPG: / dev/disk0: MBR suspicious to sector 0

  start index size summary

  0 1 MBR

  1 1 Pri GPT header

  2 32 table GPT Pri

  34 6

  40 409600 1 part TPG - C12A7328-F81F-11D2-BA4B-00A0C93EC93B

  409640 684078336 2 part TPG - 48465300-0000-11AA-AA11-00306543ECAC

  684487976 1269536 3 part TPG - 426F6F74-0000-11AA-AA11-00306543ECAC

  952 685757512

  685758464 291014656 4 part TPG - EBD0A0A2-B9E5-4433-87C0-68B6B72699C7

  976773120 15

  976773135 32 table dry GPT

  976773167 1 dry GPT header

  Please remove all drives (internal and external) except the Windows disk after having properly stop your MP.

  A. we need to disable SIP.

  1. boot in local restoration (command-R).

  2. start utility-> Terminal.

  3. type csrutil disable in the Terminal, and then press enter/return.

  4. type csrutil State.

  5 start normally, then type csrutil status to confirm that all of the individual entries are still disabled.

  B. fix the Windows MBR Boot-ability entry. Please ignore the i386 MBR error message, but not others

  sudo fdisk e/dev/disk0

  p

  setpid 4

  07

  Pavilion 4

  p

  w

  There

  Restart and test.

• Bootcamp - no boot device

  Hello

  First of all, sorry for my bad English is not my mother tongue.

  I have a MacBook Pro (late 2011, i7 2, 2 GHz, 320GB HD, 4 GB RAM, Radeon HD 6750 M 512 MB, OS X El Capitan) and I tried to install Windows via Bootcamp 8.1. I changed the info.plist file because my Macbook still have superdrive and could not install bootcamp with a USB key. At this point, no problem. But when the reboot from OS X, appears a message saying: "No boot device - insert boot disk and press any key", that I was wrong? How can I install windows? Now whenever I turn on my Macbook, I must maintain option and select Macintosh HD thanks.

  You must download the W8.1 ISO to your Mac from https://www.microsoft.com/en-us/software-download/home and burn it to a physical DVD. Your Mac 2011 is not compatible USB start correctly. 2012-2014 mac supports USB installers. Change Info.pllist will also cause driver problems.

• Satellite M50D-A-10W - error "reboot and select proper boot device."

  I have a Toshiba Satellite M50D-A-10W passing me all nuts "reboot and select proper boot device."

  This has happened before and it was solved by ctr-alt-del and F12 to get into the BIOS where the date went back to some time in 2010 - after put so far and to change the boot device, everything worked fine... until the next day.

  Now I get the screen "reboot and select good boot device ', but the F12 key does not; I also tried F2... the message keep multiplying, no BIOS...
  Help, please!

  In some cases the BIOS is only accessible by pressing the button turn off force on the lower side of the unit.

  Info:
  http://APS2.toshiba-tro.de/KB0/TSB3C03JR0000R01.htm

  After that you were able to start the windows system, its highly recommended to update the BIOS as BIOS update would solve this annoying problem.

  Info:
  http://APS2.toshiba-tro.de/KB0/TSB4903N50000R01.htm

• Reboot and select good Boot Device problem - my PC does not start!

  Hi all

  Whenever I turn on my computer I get the message "Reboot and select proper boot device or Insert Boot Media in selected boot device and press a key.

  I checked the diagonistics material and these are the results:

  Test CPU-

  Hard drive: failure of the connection Test - Error Code: BIOHD1

  Memory - past

  I don't think that the issue is a faulty connection. My reason to believe so because I think that I had a virus on my computer (I was not able to confirm) I tried to delete the last time I was able to use the computer. Then I turned off the computer to restart, but unfortunately, that's when I got this error message.

  I had this problem once before (about 3 years ago) and I was not able to solve this problem, so I just stopped using the PC. Then one day my Dad turned on the computer (a few months later) and it worked all of a sudden.

  Anyone know what this problem is? How can I solve this problem?

  Any help is greatly appreciated! Thank you very much for your time and effort!

  Additional information:

  It was originally a windows 7 PC, but I have upgraded to windows 10, which is the current operating system.

  Product: HP p6620f

  I managed to start my PC again.

  I have unplugged all connections and left it that way for about 24 hours. Then I plugged everything back in and all of a sudden the PC worked again. I don't know if it will last, but right now it works.

  I'll write another post if something changes.

• HP Pavilion 15 t-n200: sometimes not found black screen boot device

  Computer during the race will go sometimes to black screen and say "boot device not found", I am able to

  correct the problem by power off, wait a few seconds back, computer power will start

  Save as normal and work very well.  This happens maybe once a week. My fear is of course to some

  time not to come back to the top. Are there corrective measures, should I try now? I have a hybrid

  static hard drive (ST500LM000-1EJ162)...

  .

  Hello @jla11,

  Thank you for visiting the HP Forums! The Forums are a great place where you can find solutions for your problems, with the help of the community!

  I understand that you have a problem with the laptop to a black screen and tried to help you!  I see that you will get the error on the hard disk.

  You might try to test the hard drive for the failure.  In this way, you can check if there are problems.  You can use the following to help:

  Laptops HP - device not found Boot error or hard drive not detected

  You should be able to skip to step 2.  Please post back with the results.

  Please let me know if this information helps you solve the problem by marking this message as 'accept as Solution', this will help others easily find the information they seek.  In addition, by clicking on the Thumbs up below is a great way to say thank you!

  Have a great day!

• Pro 608: HP 608 Pro will not boot-Boot device not found

  I got my new Pro 608 and installed my software after upgrade to Windows 10. Do okay, but the next day, nothing works!

  Keep saying that Boot Device not found!

  Not sure but it could be HP shield encryption does not work well? now, he cannot read the HD? or HD shot?

  I tried to restore default - but still does not work. Now other bios diagnostics no longer work. That is to say he's corrupt!

  Tried to update the bios, but doesn't seem to work. The bios still say 7/2015. I tried to update the bios 9/2015. Also used 7/2015 bios, bios Diagnostics but still does not.  I use a USB port and a connector USB Belkin C - I think not that it really is booting from the USB key to install the Bios.  I set the Bios to activate the firmware-C update.

  Sue, the best thing you can do since it is a new Tablet is contact HP Support directly for warranty repair.

  Most likely, they will replace the unit.

  Contact HP worldwide | HP® official site

• HP Envy 360: Boot Device no error found - when you use a HDMI cable only

  Boot Device not found error - when I connect an HDMI cable to my Dell monitor. (I do with this laptop in my another desktop and it works very well).

  "Please install an operating system on your hard drive."

  F2 for HDD diagnosis (3F0)

  Go to hp.com/go/techcenter/pcdiags

  As soon as I disconnect the HDMI and reboot everything is big again.

  I tried with 2 HDMI cables of different (one that works very well in my office and my HP Monitor).

  I really need to use a large monitor when you work... any suggestions?  Thank you! -kelly

  Welcome to the HP forums! It's a great way to engage, ask questions and find resolutions by working with specialists from the community of HP. I understand that the computer throws to a not found error message boot device when it is plugged into an external monitor via HDMI. It will be a privilege to help you.

  A remarkable work was done by an extensive troubleshooting before asking the question in the forums of HP. It's always a great pleasure to work with tech-savvy and technically customers sounds like you. Kudos to you for this. I am amazed at your technical skills and the value certainly your relationship with HP. We greatly appreciate you for doing business with HP and consider a privilege to share this platform with you.

  Please perform a hard reset to see if the computer goes off and changes things. Steps to follow:

  • Turn off the computer and unplug the charger. Then remove the battery only if it is removable.
  • Press and hold the power button on the unit for 15 seconds to carry out the static electrical charges inside the machine.
  • Replace the battery and the charger plug it back. Try to turn on the computer.
  • Please perform a default bios also.

  Please check in the bios if the bios can be extended to this monitor via a cable HDMI to work.

  If please check on another screen as one TV (not another monitor) with the computer for windows startup and the cable connected to the TV HDMI to further isolate the issue.

  Please update the bios, the chipset and drivers of this link http://hp.com/drivers graphics cards

  Please visit these links for assistance: http://support.hp.com/us-en/product/HP-Spectre-XT-15-Ultrabook/5296019/model/5333249/document/c01186408/

  Link 2 http://support.hp.com/in-en/document/c01443463

  Run the system diagnostics without the connected HDMi cable, that if you don't have not done from the above link 2. You can ignore the link 2 If this was done without the connected monitor.

  I really hope that the problem is solved without hassle and things work fine. I hope this helps. Please let me know how it works.

  Just to say thank youPlease click the ' Thumbs Up ' button to give a Kudos to appreciate my efforts to help me. If it helps, Please mark this "accepted Solution".

  Now carefully and have a wonderful week ahead.

• HP pavlion 15: Please HELP NO BOOT DEVICE FOUND

  I have a hp laptop that says no boot device found I checked the bios on that everything was the same so I won't change anything and I went to system dignotcts it wouldint work, that I keep for a day and today I keep the battary on the 5 min a6 and I put back my laptop truned it once again, and when he returned to no devices found Boot sccern I clicked on before F2 was a black is a blue fantasy the left now, and then Pentecost on the other one i made the screen a chip test passad I did another test it passed now what I do?

  If troubleshooting does not solve your problem, you need to perform a factory restore or using the partition recovery or recovery discs I hope that you created when you first got the computer:

  http://support.HP.com/us-en/document/c01443463

• Satellite C50-B-13N - error "Reboot and select good boot device."

  Hi all

  My laptop recently bought C50-B-13N moving 39 updates yesterday, when it crashed.

  Get back with me stuck in a loop continuous. After what seemed like the logical approach to reset to factory settings, I have
  seem to have accidentally deleted the data on the disk.

  I have now repeatedly received the error message "Reboot and select proper boot device."

  I tried the F12 approach to , but my Start Menu does not have this option.

  I'm frustrated that the new laptop played if bad, given that I have had Toshiba devices for about 10 years.
  In addition, I am disappointed that potentially serious consequences to remove the drive were clearly deprecated for me, before you start.

  Please give us a solution.
  The laptop is 4 months old.

  In addition, how can I start the process of an application under my warranty?
  A dissatisfied customer of experience to date.

  Kind regards

  CGI

  I seem to have accidentally deleted the data on the disk.

  Obviously the HARD drive recovery procedure is not possible now because the HARD drive recovery files have been deleted.

  I guess you have not created such recovery media as recommended in the user's manual.

  Well, in this case, you have a chance to order a missing middle of recovery and recover the laptop to factory condition.

  Means of recovery can be ordered here:
  http://backupmedia.Toshiba.EU/landing.aspx

• Satellite L300 - no boot device

  (I am a German<~>

  Hello
  my laptop does not start after it crashes. I was typing my reports for the school. It says "no boot device" and I don't have a backup or a recovery disc.
  (I forgot to create). What can I do now? I need my Vista 32 bit Home Premium back. But how?
  And I don't have registries it.

  I have a Toshiba Satellite L300 Model.

  Hello

  The HARD drive is recognized in the BIOS? If so, you can start in safe mode?

  To be honest, it looks like this drive is defective and so the laptop couldn t start more of the HARD drive. Maybe you need a new and if your laptop is under warranty, you should get a new one free of charge from the ASP.

  Welcome them

• Pavilion dv6 - 7095ca: no boot device - insert boot disk and press any key

  
  

  Thanks for your help and please excuse my bad English.
  Please check item 7, if you're in a hurry. This is the point with my Pavilion DV6 - 7095-CA:

  (1) the operating system is Windows 7 Home Premium (64 bit), the provided original with my 7095CA Pavilion, more updates HP until 2013, and all Windows updates until July 2015.

  (2) now I can't access the operating system and I have no interface UEFI. I can see that I press F2 at startup, just a test simple disk in BIOS f.0Une (the test shows that the disc is OK)

  (3) return in 2013 it took a drive failure. I did replace the disk and reinstall original Win7, all updates, including the HPS, win7 updates and all my personal software.

  (4) at this time, I bought a spare hard drive and did a complete copy of the disc using Partition Wizard bootable cd. The second disc has been tested and worked perfectly, with all of my personal software on this subject.

  So I have 2 HDs identical with the same system on both drives, fully working and tested.

  (5) a few days ago I came across the HP website and made a few updates, including the BIOS f.0Une (the last BIOS update, was of course).

  (6) after BIOS update ran, I received the message "no boot device - insert boot disk and press any key".

  (7) I couldn't solve the problem, so I did remove the hard drive and install my backup drive, which lay in a dry place without danger from 2013.

  (8) I turned on the computer and got the same message "No boot device - insert boot disk and press any key", and I couldn't find any way to solve this problem.

  Now I'm doing a new installation on a third HD everything works very well, so far, in the new facility and I will never buy HP again.

• Satellite L855-149 - "no boot device. Please restart.

  Hello!

  Recently, I have been making a mistake on my computer; driver iqle not less or equivalent. The errors were happening maybe once more 2 weeks. Yesterday however, it started happening every hour, then the second, she has restarted since the last crash again.

  Finally windows did not start properly and it came with a recovery menu. I tried everything, except the cloth of hard drive because there's stuff that I need. After a system restore, everything worked, but then it crashed again. This time when I started it went to a black and white screen then reading letters controls the media, checking [fail] media and then no boot device. Restart the system.

  I looked but each video and post is a different error as no found boot device. Insert the disk and press a key. So now, before I lug the PC World and get ripped £ 200 to receive no said that they could not fix the problem, I come to you guys. Please help me! Your My only hope! (A * to make Star Wars reference lol)

  I'll attach some pictures to help you! Thank you!

  http://i.imgur.com/HUCbgfS.jpg
  http://i.imgur.com/uyxSuml.jpg

  Hello

  In general the media error check failure always appears if the BIOS cannot find the boot device.

  In my opinion the various basic scenarios are possible:
  First of all it is possible that your HARD drive is dead and so laptop can not find system
  But this seems strange because in case of BIOS, HARD drive problems would turn to another bootable device as ODD or LAN.

  So a card mother (defective controller for example?) general problem could also be possible.

  To be honest, it of always difficult to establish a fair and definitive diagnosis without verification of the material first.
  Anyway, in my opinion, you should check if the new HARD drive and the new installation of the OS would solve your problem.

  Of course, you can try to start Notepad using a LiveCD bootable disk just to see if you could start Notepad without a fresh install of the OS.