Boot to restore after 10.11.4

Similar Questions

• an outlook Express account can be restored after a clean boot from the XP operating system

  an outlook Express account can be restored after a clean boot from the XP operating system

  If you set up from scratch.

• I don't want the session to be restored after end of task

  From time to time when I come across a malicious website which prevents any action of navigation. If the simplest action is to use the end task on firefox.exe task manager. It works well, however, because firefox has been forced to leave he is trying to restore the tabs, I had open. Previous versions of firefox would give you the ability to restore or to stop trying to restore after a few force leaves. now firefox keeps trying to recover the previous tabs.

  How can I set firefox to ASK if I want to restore the previous session?

  You can set the integer pref browser.sessionstore.max_resumed_crashes to 0 on the subject: config page in order to get the about: sessionrestore page immediately with the first start after a collision has occurred or the Task Manager was used for the closing of Firefox.

  • http://KB.mozillazine.org/browser.sessionstore.max_resumed_crashes
  • http://KB.mozillazine.org/about:config

• How to enable automatic session restore after a crash

  I'm trying to enable automatic session restore after a crash. I put browser.sessionstore.resume_from_crash to true, but it is false. Is there is a dependency on another parameter that is the cause of return? Or other means to enable automatic crash recovery?

  The option 'When Firefox starts' is set to ' show my windows and tabs from last time '. I'm not under any session management extensions.

  All browser.sessionstore settings have default values except these:
  Browser.sessionstore.max_tabs_undo: 500
  Browser.sessionstore.max_windows_undo: 100
  Browser.sessionstore.restore_hidden_tabs: true
  Browser.sessionstore.resume_from_crash: false

  Thank you!

  Start Firefox in Safe Mode to check if one of the extensions (Firefox/tools > Modules > Extensions) or if hardware acceleration is the cause of the problem (switch to the DEFAULT theme: Firefox/tools > Modules > appearance).

  • Do NOT click on the reset button on the startup window Mode safe or make changes.
  • https://support.Mozilla.org/KB/safe+mode
  • https://support.Mozilla.org/KB/troubleshooting+extensions+and+themes

  If you don't keep changes after a reboot then see:

  • http://KB.mozillazine.org/Preferences_not_saved

• is it possible to save the Office XP for multiple monitors and restore after using the laptop in mobile mode?

  Is it possible to save the Office XP for multiple monitors and restore after using the laptop in mobile mode?

  Hi Kenelms,

  You can follow this link & check if it helps.

  HOW to: Set up hardware profiles for laptop computers in Windows XP

  Hope the helps of information.

  Please post back and we do know.

• My computer is stuck in a boot loop indefinitely after downloading the Vista updates.

  original title: I have the same problem posted by Don Gagen on 16 April. My computer is stuck in a boot loop indefinitely after downloading the Vista updates.

  I installed some updates Vista Home Basic important for my laptop on Wednesday, and since then, my computer won't start. I get to the first page of Windows that shows "Configuration updates 0% complete" for about 15 seconds and then restart the machine. This loop continues indefinitely. I spoke to the manufacturer (Dell) who say there have been some recent problems with the update service, and I have to pay (£69) to address this problem. I don't really want to pay for a repair, when the problem does not seem to have been caused by me or my computer. I tried all the options from the start menu, but there seems to be no way to solve this problem, for example, in 'Safe' Mode, the problem persists, and 'Last successful login' does not work either. It will not launch command prompt. I ran Dell diagnostic check before extended initialization and there seems to be nothing wrong with the hardware. I have no disks system of re - install Vista (and that I would lose all my data anyway). I can also access the ID of the license of Vista. The computer is no longer under warranty, and I have no agreement to support hardware or software for it.

  I would be grateful for any suggestion.

  Alan

  Help us help you: start by reading this post 'sticky '...

  What information to post in the Windows Update forum
      http://answers.Microsoft.com/thread/1467f44b-ee27-4F7D-98d7-f1c4b35b3395

• Satellite A100 PSAA8E: Cannot boot from USB after Bios Update

  Hello

  I downloaded the latest bios (v6) for my satellite a100 (psaa8e) and after the update of the old bios, I noticed that I can not boot from USB. Is there a way to restore the old bios or will this problem solved?

  See you soon
  MB

  And before you can update the BIOS you were able to start the bootable CD from the external optical drive USB drive facilities?

  To be honest I really don't believe it. Try to connect USB FDD and you will see that the FDD is recognized and you will be able to use it as first boot device.

• Vista can only boot mode safe after updating Panda Internet Security installed on the system

  Original title: VISTA can only successfully starts in Mode safe. When you try the System Restore restarts in Normal Mode and restore failed "Volume Shadow Copy Service used by the system restore does not work"

  Problem started (I think) after that PANDA INTERNET SECURITY did a update and says a restart is required (29/09/2010). System could not restart normally. Started, but virtually nothing loaded and couldn't do anything.

  In Safe Mode, first mistake was a Protection Exception for TPSrv.exe (a PANDA executable)

  Tried to do a Safe Mode system restore to point before PANDA update (28/09/2010). System Restore starts safe mode and then restart in Normal Mode.  After about an hour comes up with error message "Volume Shadow Copy Service used by the system restore does not work. (0 x 81000202) event log.

  I also tried sfc.exe but found no compromise windows

  Hello

  Follow the steps mentioned below.

   

  Method 1:

  Check if the Volume Shadow Copy service is started. Follow the steps mentioned below.

  a. click the Start button and in the search box, type in: Services.

  b. press "Enter" to open the Services window.

  c. find related services that are listed above and check the status (on the road) and the Startup Type (automatic).

  d. double-click the service to change the status of started and set the startup type to automatic.

  Try to do a system restore and check.

  Method 2:

  Since you are able to boot into safe mode, I suggest you perform a clean boot and disable all non-Microsoft applications, then boot normally and control.

  To perform a clean boot follow the steps mentioned in the link given below.

  How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7

  http://support.Microsoft.com/kb/929135

  Note: Follow step 7 to start the computer in normal startup.

  Method 3:

  If you think it's a Panda Security software that causes this problem then, I suggest to uninstall Panda security of the system and check if you're able to boot normally.

  http://www.pandasecurity.com/homeusers/support/card?ID=23010&IdIdioma=2

  Thanks and regards.

  Thahaseena M
  Microsoft Answers Support Engineer.
  Visit ourMicrosoft answers feedback Forum and let us know what you think.

• going, I'll be able to use the factory restore after hiding recovery drive Q?

  Hello world!!

  I recently bought E420 and I have restored factory settings once. Since then, the drive of Lenovo_recovery (Q) become visible in my exploring. Given that others also use this system, which anyone can mess with the recovery disk. I like to retrieve from the hard drive as its fast and easy so. I really never wanted to lose that drive. I tried to hide it

  I found this article on the Lenovo support site http://support.lenovo.com/en_US/detail.page?LegacyDocID=MIGR-71742 (see). I followed the steps. There were LenovoQDrivie.exe such file in my recovery disk so I download the Lenovo_hide_Drive_Q.exe and run that. After that my drive is not viisble in my exploring. I checked it the diskmanagement (make a right click my computer-gale-diskmanagement) here I can see the drive letter has been removed from this disk and see the car now, 100% free space... How can happen? is it just hidden? or I deleted the recovery because the article is for vista and other series of thinkpad? Please answer.

  I'm not currently check my system by running the factory as my system restore works very well and I have installed various related work in software.

  To check I pressed on enter at the beginning and after that I pressed F11 as flashed on screen and I could see display (Lenovo recovery screen after putting a password) which gives various restoration system - as option, command, prompt recovery of start and end of factory default restore. I don't want to take the risk I have no restore selected at the start of the factory and restarted. Defragment in window as I see this player with fragmentation of 3%.

  I just want to ask wheather my Lenovo_Drive is safe and I'll be able to use it to restore my system to factory default in the future? I don't want to try it now that the system is working fine and I don't want to take any chances.  In diskpart also I have lenovo dirve as partition 3 that is hidden. As I said could reach the screen giving 'restore defaults' opition, go, I'll be able to use this option in the future?

  Called the hotline, that they were not able to answer...

  I will be grateful if someone can help me...

  Thank you

  
  

  Hi Alexander,.

  Windows 7 recovery would erase the disk and put 7 on the entire disc.  So, you don't want that.  I didn't know you already burned disks.  It's good that you did.

  If you really want to test it, you could make a backup of the current system on external media, (such as a hard drive), and then run the recovery and restoration of the backup.  If it works, then you know recovery is correct.  If it isn't, then you could boot from the recovery discs you've done and restore it from your current backup.

  If you do not want to take the chance to test it, then at least you know that with restore disks and backup to external media that you can restore the system to its current state, no matter what happens.

  Dave

• partition boot camp disappeared after resizing Macintosh HD

  Hello

  I have a macbook pro with OS X El Capitan 10.11.6.

  I had a windows 8.1 installed on boot camp and ran out of space on windows, so I tried to extend the space by adding a new partition on mac and then merge on windows using the "minitool' but when I rebooted with now that the ALT key was not the boot camp partition...

  I then started the mac and changed the boot disk in boot camp and restarted and it gave me a message "there is no disk bootable..." or something like that.

  It's really important not to lose the windows and more important still do not have to format the new laptop please (because I had a similar problem before Re: Partitioning a Hard Drive Error on MacBook Pro)

  I tried to check for similar discussions but seemed to I'll do it is harder to resolve because I do not understand most of what is said and was afraid to do worse.

  Hello MayMedhat,

  I understand the partition Boot Camp have been adjusted and you are no longer able to access the windows on your MacBook Pro.  Because you cannot access side Windows of your Mac after setting, you must recreate your Boot Camp partition and reinstall Windows on your Mac.

  Set up Windows on your Mac partition
  
  

  Change the size of the partition

  It is not possible to change the size of the partition after installing Windows, but you can delete the partition and create a new partition to the correct size. Do not try to resize your Windows partition or a third-party application.

  How to install Windows using Boot Camp

  Please let us know if you need any additional help and thank you for visiting the communities of Apple Support.

  See you soon.

• Partition boot camp missing after resizing of disk utility

  Is anyway to fix this?

  I did things I shouldn't probably try. I tried to fix this by myself and messed up

  My windows partition disappeared after I have resize the drive using OS X I'm afraid header NTFS is more intact

  

  And now I'm analyzing my disk0 with testdisk but it not showing desired writing...

  

  So many incompatibilities.

  Please guide me, I gave up, I just need access to my windows partition to take all my data so I can copy on my external hard drive.

  Thank you

  Can you post the output of

  diskutil list

  Cs diskutil list

  sudo TPG - vv - r see the/dev/disk0

  rdisk0s3 cannot be the right partition to search for the NTFS header. The partition you more, and I'll be fine. Boot from a disk of OS X, if possible.

• Bookmarks previous restoration after crash

  Following a fall last weekend and after Dell restored & wiped out original data sheet & computer settings, I'm coming back Firefox bookmarks for all 3 users on this desktop computer. Carbonite has finished restoring my data (I think). I tried to make the road to restoring Firefox Bookmarks-import-etc., but all I get is either favorite 2009 or a day AFTER the accident. These two are useless. Where, oh where are recent useful bookmarks? None of the help of 'blog' I can find seems logical, or is simply not relevant.

  Thank you.

  Since the bit of reading, that I don't have on Carbonite, your Firefox profile data would be included in the backup with the settings by default in Carbonite - all except the cache of Firefox. You must locate the former profile folders in the backup and then copy specific files from the old profile to the new profile, replace the corresponding files in the new profile.

  http://support.Mozilla.com/en-us/KB/recovering+important+data+from+an+old+profile

  Your old profile is located here in Windows Vista and Win7:
  
  drive: \Users\Windows login user name\AppData\Roaming\Mozilla\Firefox\Profiles\profile_name

• Satellite A660 - boot problems USB after BIOS update

  Hello

  I own a Toshiba Satellite A660 and have recently updated the BIOS with the latest version (1.80). Since then, the laptop freezes on the splash screen (the one with the Toshiba logo) whenever a USB flash memory is attached.
  It works without the memory flash connected and if I connect it after I enter the starting or the BIOS Setup menu. I can even start her like that.
  As far as I'm concerned, this is a serious regression. Is there a way I can downgrade to the version of the BIOS, or any other way to solve this problem? I rely heavily on external USB drives.

  Kind regards
  Claudiu.

  Claudiu salvation,

  That is really interesting, I have to say so I tested on my new Satellite A660 and Transcend 4 GB USB Stick. Well, I also installed 1.80 BIOS but I can t view this problem HARD drive is set as first boot device and all the other BIOS settings are default. The Toshiba screen and Windows computer starts as usual.
  No problem at all!

  Have you tested different USB devices?

  In General, it is not possible to downgrade BIOS. It is possible to an authorized service because Toshiba on page you can download the latest version only but I doubt it s a bug in the new version of BIOS because it works on my A660.

• C855 satellite can not boot from battery after upgrading W8-W10 Home >

  Hi all

  I have a problem really strang after upgrade my C855 Satellite of Windows 8 to 10 of windows. After the upgrade, I can't boot my system of battery only. With the adapter, I had no poblem.

  I bought a new battery, but it still had the same problem. Cannot start system battery only.

  The following steps, I was

  • Got the latest Bios Update
  • Used a new battery
  • Do the powerless laptop (detach battery and adapter) and hold the power button for 15-20 seonds. After that return battery and adapter
  • Do seals in my power, parameters of balanced energy vice versa

  Is there anyone who has had the same problem or can advise me?

  Thanks in advance for the help

  Hi Repairlab

  You are not alone. I currently have a C50 Sat with exactly the same problem, with the exception of the upgrade. My problem started before I upgraded to 10. Like you, I can start with the battery and using taking current, but which is rubbish for a laptop.
  I didn't upgrade the bios but the laptop does not recognize when the battery is connected and the bios update tool continues to ask for it (VERY annoying ToshIba if you already read your forums).
  I was trawl through these forums looking for a solution, but there are 0 replies on the vast majority of positions. Not even ToshIba engineers seem to have a presence.

  In any case, did you ever solved the problem, and if so can you please share?

  Thank you.

• System restore after the recovery running disk

  Hello

  Is there a way to restore my system to previous state after you run recovery disk?

  I forgot to backup my files and apparently lost my data after the recovery running disc. All suggestions will be appreciated. I'm trying to restore my system, but it is not restoration, its shows me only today's date.

  Best regards

  Hello Jazz

  Please slow down. Your ad is quite confusing. You can the prior words includes on two completely different ways.

  (1) previous state as factory settings. If you use recovery media is removed from the entire HARD disk and all data will be lost. There is no way to recover them. To the review no data more.
  (2) previous state by using System Restore tool. It will roll back OS time earlier, but all data will be there. Sorry, but if you have ever used recovery media, it's too late for this option.