Bootable USB drive (8 GB or more)
Well, if I want to make a bootable USB.
I know HOW to make one, but I want one that will serve as my computer such as a netbook (I'm sorry this is far from what I mean in fact).
Internet, watching the vids, messenger and mail. That's all.
I want to be able to install SOME programs on USB.
Not as you know the biggest GREAT.
But, Firefox, software TI83/84, etc.
Now I want a USB you can reformat and use that is equal to or greater than 8 GB.
I don't want to partition the USB, I want FULL 8 concerts (or more) available to the OS
I bring this up is because I've NEVER seen a USB where you can do what amounts to more than 8 GB.
It just won't let you, so a LIST of USB that will allow you to do so, would be EXTREMELY useful.
Oh, Yes, I want to run Linux out there.
So, if you wouldn't mind >. >...
Advise me please on the BEST version.
The last Linux, I used was redhat
I said, there has been some updates since then...
Thank you
Young people and learning... Have mercy - Chaos if this post solves your problem, please click 'Mark as answer' or 'useful '. This helps other users having similar problems find the answer faster.
Thanks for your info...
But I wanted to boot linux
Although I do not know the same procedure IS involved Yes...
Thank you...
Essentially, is that I need a 8 GB USB, what will make this >. >...
This is the BIGGEST problem.
Young people and learning... Have mercy - Chaos if this post solves your problem, please click 'Mark as answer' or 'useful '. This helps other users having similar problems find the answer faster.
You can use the 8 GB to start Windows and Linux in row. Also, you can use Grub as bootloader to choose between the two operating systems.
You can divide the USB into Partitions as you will with the HARD drive. I think that you will have a utility to do this.
Good luck and keep us posted with your comments and attempts.
NASS - http://www.nasstec.co.uk
Tags: Windows
Similar Questions
-
Updated the BIOS via bootable USB drive
I want to update the BIOS by using the ISO image provided. I want to write this image a usb, then on startup, the bios update. How to create bootable USB drive.
My system is E430, although the question is pretty generic.
Hi again, ahaider7
I don't think that a program would be necessary. However, after doing more research, I'm not sure the work process. In addition, update the BIOS via USB is not supported, because as far as I know. If you want to update the BIOS of your machine, I highly recommend using the utility to update the BIOS. You can also burn the .iso to a CD and the image file.
Kind regards
Adam
-
Please suggest which is the best ever tool to make bootable usb for a windows 8 ISO?
Hello
The free utility on the link below is good.
Kind regards
DP - K
-
Bootable USB-CD/DVD drive need for Portege M200
I couldn't find any list with bootable USB-CD-& DVD-ROM-drive for Portege M200.
No boot on USB drive. Some change to the boot of other USB devices?Sorry for my English
Hello
Please check this thread:
http://forums.computers.Toshiba-Europe.com/forums/thread.jspa?threadID=45144Horwath user posted a link to the Toshiba document that gives all the information on the CD/DVD bootable USB drives.
In addition, you can buy a compatible USB WEIRD of the ASP from Toshiba
-
I wish I had more space on my drive "C".
Hi Jaxown,
You can copy & paste or move programs & application on the USB drive.
For more information, see these links: to move files by dragging
Hope the helps of information.
-
H8 - 1520t envy: SS USB Driver for Downgrade of Envy h8 - 1520t for Win 7 Pro
Demoted successfully to Windows 7 Pro to win 8 long without problems except SS USB driver (s).
More specifically, looking to see if I can solve the missing drivers from:
SM Bus controller
PCI\VEN_8086 & DEV_1E22 & SUBSYS_2AD5103C & REV_04
PCI\VEN_8086 & DEV_1E22 & SUBSYS_2AD5103C
PCI\VEN_8086 & DEV_1E22 & CC_0C0500
PCI\VEN_8086 & DEV_1E22 & CC_0C05(USB) Universal Serial Bus controller
PCI\VEN_8086 & DEV_1E31 & SUBSYS_2AD5103C & REV_04
PCI\VEN_8086 & DEV_1E31 & SUBSYS_2AD5103C
PCI\VEN_8086 & DEV_1E31 & CC_0C0330
PCI\VEN_8086 & DEV_1E31 & CC_0C03Previous posts led me to the drivers h8 - 1360t.
Any thoughts on sp59550, sp56732 or sp57417?
Thank you
Hello:
Here are the links to the drivers you need for the ID you posted:
First install the smbus controller driver and restart.
USB3:
-
Download tool Windows 7 USB/DVD - bootsect USB drive error - desktop windows Home premium 64-bit
So I get the bootsect error when you create a windows 7 Professional 64 bootable USB key when the machine I'm using is windows 7 Home premium 64-bit! Anyone know what is happening here?
Thank you
Hello Hardwareeingineer,
Thanks for posting your question on the forum of the Microsoft community.
According to the description of the problem, it seems that you are facing problem creating bootable USB drive. If you get the error bootsect so I recommend you follow the suggestion provided by Sanketp responded on July 4, 2010 in the following thread.
Problem using the USB/DVD of Win7 download tool (concerning bootsect.exe)
Hope it would help. If problem persists always post back with the current state of your computer and the result of the proposed suggestion, we will be happy to help you.
Thank you.
-
Make multiple copies of the bootable USB.
Original title: AS bootable usb.
CXC,
I have a bootable USB key that contains a Windows 7 and an office package.
I want to duplicate this package and I so (maybe three) of both of them.
How can I do?
Tim
See:
How backup Bootable USB Drive - Windows
also:
Creating Image backup Bootable USB Drives ...
also:
How Save exact copies of USB flash drives: create ...
also:
-
Satellite L300D-13s - how to create a Bootable USB Flash for Vista Recovery drive?
Hello
Has anyone ever created a Bootable USB Flash of their Vista HARD disk recovery drive? If Yes can you help me create mine? I know that you can do for the new OS and that Toshiba provides a tool for this.
Thank you
Something like this is not possible. I have older machine tool and I can confirm that recovery USB media cannot be created DVD only.
-
Portege 3480CT: how to make a USB bootable floppy drive?
I need help to make a USB bootable floppy drive.
My laptop 3480CT has not the traditional floppy drive instead, it uses a USB floppy drive and the bios has an option to boot from USB FDD.I would like to use a USB key to start (a Lexar Jumpdrive 32 MB 05dch 0080 h and GTX 1 GB 1516 h pid pid 8628 h), instead of the floppy. I want to load the boot XP on floppies, so I run recovery programs using chkdsk.
I tried the usual suspects, the bootloader makebootfat and mkbt20 HP.
I tried the demo version of the commercial product Flashboot.
I photographed a floppy back 5.0 system on the USB key using the I-Setup demo.
All failed including the specific option in the makebootfat images for FDD option and 3 different options of Flashboot.I ran
http://Enos.itcollege.EE/~mkalme/Pahn/tut/tut.htmlUsing Hexplorer ICY, I was able to confirm that the DOS5.0 on the boot sector pendrive is identical to the diskette.
I could start in Dos5.0 from a floppy disk with drivers USB Panasonic and confirm that my Lexar was a system of 1.44 MB disk and command.com displayed in the directory. The GXT is not recognized by the Panasonic, nor BACK USB drivers to Duse 4.4 4.9. Another worrying indicator, it is my computer XP did not see all of the files on the pendrives, not command.com, or two hidden files (view all the hidden files option).I learned that Transcend a specific option that creates a bootable 1.44 mb floppy
image on their USB key.Here is what I have gathered, corrections and suggestions are welcome.
Interface USB the USB protocol specifications
bInterfaceSubClass field specifies the Protocol
01 order reduced block (RBC) a flash device
UFI 04 a floppy drive floppy drive
05 FDD SFF-8070i SFF-8070i command blocks however, funding may be in a different subclass for example RBCbInterfaceProtocol field specifies the transport protocol
00 control/Bulk/Interrupt (CBI) with break of completion for FFD only
01 CBI without interruption of completion for the FDD only
transport in bulk only 50 h, including primingI don't know if the USB controller must imitate the FDD Protocol.
Any ideas?
Hello
You cannot boot from the USB key.
The BIOS of the laptop does not support something like that.
Laptop factory supports and use different BIOS versions. As far as I know on this laptop Toshiba BIOS was installed.To my knowledge this BIOS does not support booting from the USB key, but only the HDD, ODD, LAN or USB - FDD.
If you want to boot from USB FDD, you can create a bootable FDD floppy.
Windows operating system creates the boot floppy drive when you right click on the connected floppy drive and select format. Then simply choose the option create MS-DOS startup disk start. -
Since I can I 7, whenever I have more in a USB drive or USB drive, the computer crashes
I recently upgraded from (English) Edition Vista Home Premium (English) Windows 7 Home Premium 64-bit. It works fine except that my NDAS drive is more work and as soon as I connect an external USB drive or USB key, the system just hangs and I have to turn off to spend. Even then, I have to disconnect the USB device, otherwise the computer will not start even upward. No error message, it just hangs. The computer (ACER AX1300) is only 3 months old and was purchased with a warranty upgrade for Windows 7
It affects all programs running when I plug a USB key
No error message is givenIncorrect forum for these questions. Transfer your question here: http://social.answers.microsoft.com/Forums/en-US/w7performance/threads ~ Robear Dyer (PA Bear) ~ MS MVP (that is to say, mail, security, Windows & Update Services) since 2002 ~ WARNING: MS MVPs represent or work for Microsoft
-
How can I make my drive external bootable usb to install xp on a web book?
Book of the Internet is not equipped with any optical drives or the recovery partition. That's why windows is corrupted, I need to format and re install. I have a 40 GB usb external drive. and another pc to put the files with.
Is this feasible?
I don't know if this will help you.
http://DownloadSquad.switched.com/2009/08/27/make-a-bootable-USB-Installer-for-Windows-XP-Vista-7-with-Wint/
-
can I copy the file .iso from window of a disk to another drive and can copied .iso file of window to be used to make bootable USB key?
I have the iso image of the window, and I want to copy the iso file on my hard drive for pen drive to make the bootable USB key in the future. So I want to know that can copied .iso file of window et to make the bootable USB key?
Discussions were merged.
Deleted duplicate.
Hello
This should help you.
How to create an Installation USB Flash Drive with an ISO file:
http://www.SevenForums.com/tutorials/2432-USB-Windows-7-installation-key-drive-create.html
See you soon.
-
How can I create a virtual device bootable USB to install Windows 7 on a hard drive?
Hello
Ho can I prepare a USB key, in order to to use, so that I can throw a Windows 7 Ultimate machine installed locally on a virtual drive?
I don't want to change the BCD on the computer laptop e. (laptop running Windows XP)
Kind regards
BOGDAN Ciprian
Original title: USB stick bootable laptop for Windows 7 VHD?
Hi CiprianBogdan,
Thanks for posting in the Microsoft Community.
Want to know how you can create a bootable USB to install Windows 7 on a virtual hard disk.
I would have you post your query in the TechNet forums because it caters to an audience of it professionals.
Your query will be better addressed there.
Check out the link-
http://social.technet.Microsoft.com/forums/en-us/category/w7itpro
We know if you need help. We will be happy to help you. We, at tender Microsoft to excellence.
Thank you.
-
I have Windows 8 is installed and an iso of Windows 8.1 on my USB.
My previous version of windows (which is already installed on the hard drive) will erase if I boot from a bootable USB. Please help me!
When you upgrade to 8.1 Windows it will replace your Windows 8.0. The only way I know to have both is to buy a copy of Windows 8.1 and install on another partition or drive. Hope this helps and if you need another post to help and we will be happy to help you.
The above opinion is mine and mine nothing and does not necessarily reflect that of Microsoft, it's employees, or any other Member of this forum.
"When we try to take anything by itself, we find it hitched to everything else in the universe." -John Muir
Maybe you are looking for
-
recently restored my HP Pavilion DV6-6C35DX, and now the wireless card does not work It appears in the device as Realtek PCIe GBE Family Controller Manager the hardware id is PCI/VEN_10EC & DEV_8168 & SUBSYS_1805103C & REV_06 I tried to search for th
-
Player c00d10d1 don't read file file.audio that was returned to the wave of reaper
c00d10d1 fix for xp How can I fix c00d10d1.player not set file file.audio wave which was vague reaper blocks [recording software] must be a way without downloadind stufft which is not microsoft.
-
See the question in the other bo
-
Synchronization Centro690P (Verizon) with Outlook 2007 on Vista
Three days ago my old PDA Ipaq died so I decided to get a phone/PDA so I have only one device to carry. I picked up a Centro690P at the Verizon store. I have 123 contacts in Outlook 2007 (Windows Vista) as well as many nominations and wanted to sync
-
Impossible to install Flash on Windows Internet Explorer 8.1
My last version of flash player 14.0.0.176 and the more up-to-date for IE version is 15.0.0.189.When trying to install flash on IE I took to a Web page: Flash Player issues. Windows 8 (she has is narrowed to this in the editor)Essentially, it says th