Bootcamp is not install due to the mistake of the amount of available space

Similar Questions

• Removal of documents does not increase the amount of available space (Cruzer facet)

  When I delete files on my drive Cruzer facet Flash to make room for other files, the available space does not increase and so I can't add more files. Everyone knows this? How should I do?

  You use a PC or a Mac? If you use a Mac, you must empty your trash, while the disc is still connected or will not remove the files.

• [ADF, JDev12.1.3] I would like to stress that af: table takes the entire width of page and column auto-augmenter/reduce their width in proportion to the amount of available space. How...?

  Hallo,

  I see that default ADF makes all the 100px wide columns and there is the possibility to stretch a column to take full available width.

  I would like to know if there is a function / approach in ADF which - occupies all the available space - auto-calcule the width of each column to 1) the width of DB fields and 2) space in the browser window.

  I could also set the with columns of table in columns (characters) or (better?) in pixels and the framework should only for reproportion widths according to the available width.

  Or track to follow is defining the width of the columns in the table (percentage) property?

  Thank you

  Federico

  There is the possibility to stretch a column to take full available width.

  AFAIK, you can stretch several columns (read the docs for this property)

  I would like to know if there is a function / approach in ADF which - occupies all the available space - auto-calcule the width of each column to 1) the width of DB fields and 2) space in the browser window.

  (1) as far as I know, no

  (2) you can add class AFStretchWidth to the styleClass property to af:table (or surround your table with af:panelCollection and add this style class here)

  Or track to follow is defining the width of the columns in the table (percentage) property?

  Is probably not.

  % has different interpretation in different browsers, so you should use the style class AFStretchWidth.

  Dario

• error ORA-1652 on tablespace with the amount of available space

  Can someone help me understand what is happening with this "ORA-1652: unable to extend segment temp of 128 in tablespace DWH_REP_DATA? Database is 11g (windows 2008)
  
  
  It seems that my tablespace has 15 free g but it is short of space. The size of the tablespace file = the maximum tablespace file size. If there is so much space why not is not it used? Another addition disc more table space how to fix this?
  
  View of datafile: Online status
  Size of the file (Mo) 32 750.00
  Auto expand Yes
  Increment (MB) 10.00
  Maximum file size (MB) 32,767.00
  
  
  
  Thank you for taking my question!
  Kathie

  If the related tables is permanent, it means that you have a great race of DDL statement that allocated a temporary segment in a permanent tablespace: given that the statement failed due to lack of space, temporary segment has been released.
  See http://coskan.wordpress.com/2007/12/05/temp-segments-in-normal-datafile-ora-1652/.

  You need to increase the permanent size of the tablespace or attempt to modify the DDL statement so it needs less temporary space.

• How can I resize an iframe in apex based on the amount of available space on the screen with a button

  Hello.  I have a request to 4.2.2.00.11, llg Server Oracle apex.  The conditions for this application are to hide and display a navigation bar by clicking on the buttons leathers/display on the screen.  The right side of the screen has an iframe that is to fill up whats left of the estate of the web browser.  Search in google, I found a function that works on the laundry.  I need the iframe to resize when the browser hides and shows, but when I tried to create a dynamic action on click to call javascript, hide and show the features of the browser bar break.  The iframe is not also resize.

  Here's the code that I currently use.

  JavaScript in my page header

  <script language="JavaScript">
  <!--
  function autoResize(id){
      var newheight;
      var newwidth;
  
  
      if(document.getElementById){
          newheight=document.getElementById(id).contentWindow.document.body.scrollHeight;
          newwidth=document.getElementById(id).contentWindow.document.body.scrollWidth;
      }
  
  
      document.getElementById(id).height= (newheight) + "px";
      document.getElementById(id).width= (newwidth) + "px";
  }
  //-->
  </script>
  
  

  The source of the IFRAME area.

  < IFRAME SRC = "f? p = & I_FRAME_APEX_APP_ID: & I_FRAME_APEX_PAGE_ID.: & APP_SESSION.

  : NO::ROLE: & ROLE. "width ="100% "height ="200px"id ="iframe1"marginheight ="0"frameborder ="0"onLoad ="autoResize ('iframe1'); "> < / iframe >

  A colleague suggested this, and the width is now set properly.  the height is always not to fit properly in the window.  When I set the height to 100%, the default height for pixels, I put in the iframe.

• The amount of available space is a my Flash recovery area?

  Hi experts,
  
  It's 10g 2.0.4 on Windows
  
  My gui tools do not work at the moment. I know that if the FRA is completed, the database will be unusable.
  
  I ran: SELECT SPACE_USED/SPACE_LIMIT 'FRA % USED"from v$ recovery_file_dest;
  
  the result shows:.21
  
  Have I not 21% available, or it is available at 79%?
  
  Thank you, John

  Try the following query and tell me how it works.

  set echo off
  --
  -- Show flashback database file destination
  -- Oracle version 10g and up
  --
  -- 20050503  Mark D Powell   Save flashback area query
  -- 20060120  Mark D Powell   Modify column display formatting
  --
  col name              format a65       fold_after
  col number_of_files   format    99,999 heading "File Ct"
  col space_limit       format 9,999,999 heading "Alloc (M)"
  col space_used        format 9,999,999 heading "Usage (M)"
  col space_reclaimable format 9,999,999 heading "Reclaimable"
  
  prompt "no rows selected" response means flashback database is not configured
  
  select
    name
   ,round(space_limit       / 1048576, 1) as space_limit
   ,round(space_used        / 1048576, 1) as space_used
   ,round(space_reclaimable / 1048576, 1) as space_reclaimable
   ,number_of_files
  from
    v$recovery_file_dest
  /
  

  HTH - Mark D Powell.

• Windows Update could not be installed due to the error 2149842967 (KB958559-x 86.msu)

  Hello
  I am trying to install Windows Virtual PC and Windows XP mode on my computer toshiba laptop. The compatibility tool h/w PC said that my PC is h/w support, assisted virtualization (BIOS and processor support for virtualization extensions).

  I installed Windows XP Mode.

  I am trying to install Windows Virtual PC on my Tablet RTM of Windows 7 Enterprise Edition 32 bit and it fails with below:
  Windows Update could not be installed due to the error 2149842967 "' (command line:""C:\WINDOWS\system32\wusa.exe" "C:\Users\vishalt\Downloads\Windows6.1-KB958559-x86.msu" ")
  
  I tried several options suggested as
  (a) restarts - did not work
  (b) netstop wuauserv, wicks, rename the softwaredistributionfolder, netstart these services (the two) and try windows complete update - windows update has started but I still couldn't install the KB958559
  (c) try cmdprompt in a high of UAC cmd window.

  I was wondering if there is something else that needs to be done to install this package KB.

  Thanks in advance
  Vishal-

  ... The link for Windows Module game and the registry size limit could not be tried because the links on these threads do not seem to work.

  I know. You will see that I asked a moderator to post a valid link for this thread.

  Have you seen http://social.technet.microsoft.com/Forums/en/w7itproappcompat/thread/61e16760-a500-481e-a90c-9b933f0fced8 ?

  I'll keep you posted if I hear anything new. ~ Robear Dyer (PA Bear) ~ MS MVP (that is to say, mail, security, Windows & Update Services) since 2002 ~ WARNING: MS MVPs represent or work for Microsoft

• Try to reinstall the printer and will not install due to not having Admin rights

  original title: Instalation printer

  Try to reinstall the printer and will not install due to not having Admin rights. I am the administrator,

  How can I continue?

  Thank you

  Right click on the printer software setup.exe, etc > run as admin.

  See you soon.

  Mick Murphy - Microsoft partner

• get a windows installation error is not installed correctly during the installation of a 3rd - party in Windows Vista software

  I get an error message: windows install is not installed correctly during the installation of software 3 rd-party on Windows Vista Home Edition. Why I get this error and how to fix it?

  Hello

  I suggest you try the steps from the following link and see if that helps.

  How to troubleshoot issues that may occur when you install, uninstall, or upgrade one program on a Windows computer
  http://support.Microsoft.com/kb/2438651#appliesTo

• Game-CDDrive operation is not valid due to the current state of the object.

  It's been a while, please remind me how to put the code here? PSVersion 5.0.10105.0 VMWare PowerCLI AutoDeploy component 6.0 build 2358282 VMWare ImageBuilder PowerCLI component 6.0 build 2358282 license of VMware PowerCLI component 6.0 build 2315846 VMware vSphere PowerCLI component 6.0 build 2548068 VMware VDS PowerCLI component 6.0 build 2548068 Cloud of VMware Infrastructure Suite PowerCLI component 6.0 build 2548068 VMware HA PowerCLI component 6.0 build 2510422 VMware PowerCLI component Storage Management 6.0 build 2522368 trying to build a server from the ground using Powercli. Started with:

  $paramVM = @{

  VMHost =   $vmhost

  Version =   "v7"

      Name  =   "CompVM"

  Data store = $datastore

  DiskGB =   50

  DiskStorageFormat = "EagerZeroedThick"

  MemoryGB =   4

  NumCpu =   1

  Location =   $Folder

      CD  =   $true

  ResourcePool = $ResourcePool

  PortGroup = $portGroup

  Notes = "DC of DOM"

  Confirm =   $false

  }

  $paramVM . Location | select *

  New-VM @paramVM

  It seemed to go very well.

  Get-VM svr01mid100 | Start-VM

  Then, something isn't quite right.

  $paramNA = @{

  StartConnected =   $true

  WakeOnLan =   $true

  Connected =   $true

      Type  = « Vmxnet3 »

  Confirm =   $false

  }

  Get-VM chi01osm300 | Get-NetworkAdapter | Set-NetworkAdapter @paramNA

  , I get the error: Set-NetworkAdapter: 29/07/2015-18:44:36 Set-NetworkAdapter operation is not valid due to the current state of the object. Online: 9 char: 43 + Get - VM svr01mid100 | Get-NetworkAdapter | Together-NetworkAdapter @paramNA + ~ ~ ~ + CategoryInfo: NotSpecified: (:)) [game-NetworkAdapter], VimException + FullyQualifiedErrorId: Core_BaseCmdlet_UnknownError, VMware.VimAutomation.ViCore.Cmdlets.Commands.VirtualDevice.SetNetworkAdapter MacAddress: 00:10:56:ss:3f:ab WakeOnLanEnabled: true NetworkName: SameAsAbove Type: Vmxnet3 ParentId: VirtualMachine - vm - 108361 Parent: svr01mid100 Uid: /VIServer = Dom\[email protected]: 443/VirtualMachine = VirtualMachine-vm-108361/NetworkAdapter = 4000 / ConnectionState: logged, NoGuestControl, StartConnected ExtensionData: VMware.Vim.VirtualVmxnet3 Id: VirtualMachine-vm-108361/4000 name: NIC 1 Client: VMware.VimAutomation.ViCore.Impl.V1.VimClient )

  Get-VM svr01mid100 | Get-CDDrive | Select Name,IsoPath

  Name IsoPath - CD/DVD drive 1 C:\ PS > Get - VM svr01mid100 | Get-CDDrive. Game-CDDrive - IsoPath $isoPath - StartConnected $true - confirm: $false Set-CDDrive: 29/07/2015-18:50:39 Set-CDDrive operation is not valid due to the current state of the object. I disconnected and then reconnected my session. I tried to see what was going on in vCenter (which I never do) and I fount it tries to start with the ISO, but giving a frown face and reboot again. I think that he did not like something in the build of the server. Help!

  I don't know that I did it is clear enough. The new VM script seems to work, it creates a new virtual machine.

  But eventually, every setting change that I try to do on the virtual machine, I get an error stating that "the operation is not valid due to the current state of the object."

  It seems to take the configuration but then I noticed he tried to start, but it started getting the error that I put in the screenshot.

  To me, that shows that it is trying to boot from the CD, because it is a Windows error.  Moreover, he just trying to start several times.

  Now, I went back and I think that the error "operation is not valid due to the current state of the object" may have been the fact that the VM tried to boot from the CD over and over, this is what is meant by the current state.

  I noticed just here, the hosts have 4.1 on them, which does not support r2 Server 2012.

  I think we're good.  Thank you!

• ERROR: New-Snapshot (the operation is not valid due to the current state of the object)

  Hello guys!

  I've been googlin everywhere, but impossible to find a solution to my problem. I hope that one of you, qualified people can point me in the right direction :)

  I created a powerCLI script to take a snapshot of our most important servers before we do our weekly maintenance. The idea to run the script as regular powershell script and then have

  1. Add snap-ins powercli and connect to virtualcenter servers
  2. ask the VC servers to virtual machines in a perticular folder
  3. Loop foreach on these servers to create a snapshot with the name $snapshotname

  Currently, I just do it turn on a test folder that I created in vSphere that contains 3 test VMs:

  • Testmagne1 - normal operation
  • Testmagne2 - I renamed the folder for this virtual machine in the data store to generate an error.
  • testmagne3 - normal operation

  Since the servers (not the test servers, but good ones) is the most important servers in our environment, I want to be able to catch exceptions and errors when I run this script. I do this with the Try - Catch - Finally works.

  The strange thing is:

  The release of Powershell/PowerCLI is different from the output in VirtualCenter (!)

  In virtualcenter, the output is as follows

  • Testmagne1 - snapshot is created successfully - as expected
  • Testmagne2 - the snapshot creation fails because it cannot find the files .vmx - as expected
  • Testmagne3 - snapshot is created successfully - as expected

  However, the exit in powercli is slightly different:

  • Testmagne1 - snapshot is created successfully - as expected
  • Testmagne2 - creation of the snapshot fails because it cannot find the files .vmx - as expected
  • Testmagne3 - snapshot fails with the error message: operation is not valid due to the current state of the object - huh?

  
  

  Apparently once the first error is generated all succeeding VMs get error "the operation is not valid due to the current state of the object"

  
  

  I've been pulling trying to figure this problem on my hair, but I'm not getting anywhere

  
  

  Here is some additional information:

  1. the Script (abridged version of it. It generates the same error):

  -STARTUP SCRIPT-

  $ErrorActionPreference = "stop".

  Add-PSSnapin VMware.VimAutomation.Vds, VMware.VimAutomation.Core | Out-Null

  SE connect-VIServer VIRTUALCENTER1, VIRTUALCENTER2 | Out-Null # Sensored VirtualCenter names

  $servers = get-VM-location 'testfolder '.

  $snapshotname = 'Testsnapshot '.

  $verifycreatesnapshot = Read-Host "you are about to create snapshots for $servers. Do you want to continue? o/n.

  If ($verifycreatesnapshot - eq 'y') {}

  Write-Host "snapshots of creation...". »

  {ForEach ($i in $servers)

  Write-Host "instant Creation for $i."

  Try {new-Snapshot - VM $i - name $snapshotname |} Out-Null}

  Catch {$_.exception | select *;} Write-Host "Unable to create the snapshot for $i" ;}

  }

  Write-Host "command finished.

  }

  else {Write-Host "Operation canceled by user"}

  Read-Host "end of the script. Press ENTER to close. "

  ------------------ END SCRIPT -------------------

  2. the PowerCli error messages:

  Error for Testmagne 2 (as expected):

  File: [DATASTORE114] testmagne2/testmagne2.vmx

  DynamicType:

  DynamicPropertyInternal:

  FaultCause:

  FaultMessage:

  ErrorId: Client20_TaskServiceImpl_CheckServerSideTaskUpdates_O

  perationFailed

  ErrorCategory: NotSpecified

  TargetObject:

  RecommendedAction:

  SessionId:

  ConnectionId: /VIServer = SENSORED: 443 /

  Severity: error

  Message: 31/10/2013-10:52:16 New-Snapshot the operat

  ion for the entity 'testmagne2' failed with the follo

  the wing's message: "file [DATASTORE114] testmagne2/testmagn".

  E2.vmx was not found.

  Data: {ParameterValues}

  InnerException: VMware.Vim.VimException: exploitation of the entity

  'testmagne2' failed with the following message: 'thread '.

  testmagne2/testmagne2.vmx e [DATASTORE114] was not crazy

  ND ".

  TargetSite:

  StackTrace:

  HelpLink:

  Source:

  Failed to create the snapshot for testmagne2

  Error for testmagne3:

  Creation of snapshot for testmagne3

  ErrorId: Core_BaseCmdlet_UnknownError

  ErrorCategory: NotSpecified

  TargetObject:

  RecommendedAction: An error occurred when executing command: new-Snapshot. I have check

  f exception for more details.

  SessionId:

  Login ID:

  Severity: error

  Message: 31/10/2013-10:52:17 instant New-capture operation is not

  valid due to the current state of the object.

  Data: {ParameterValues}

  InnerException : System.InvalidOperationException: operation is not valid from

  e to the current state of the object.

  at VMware.VimAutomation.ViCore.Impl.V1.Task.ViCoreTaskCo

  reServiceProviderImpl.BeginTaskCompletionPoll (list 1 taskLi

  St)

  at VMware.VimAutomation.Sdk.Impl.V1.Task.CoreTaskService

  Impl.WaitForTask (IEnumerable 1 taskList, ProgressCallback p

  rogressCallback)

  at VMware.VimAutomation.Sdk.Util10Ps.BaseCmdlet.BaseCmdl

  and. EndProcessingErrorHandled()

  at VMware.VimAutomation.ViCore.Util10Ps.BaseCmdlet.BaseC

  mdlet. EndProcessingErrorHandled()

  TargetSite: Sub ThrowTerminatingError (System.Management.Automation.Err

  orRecord)

  StackTrace: At System.Management.Automation.MshCommandRuntime.ThrowT

  erminatingError (ErrorRecord errorRecord)

  HelpLink:

  Source: System.Management.Automation

  Failed to create the snapshot for testmagne3

  3 PowerCLI version

  PowerCLI Version

  ----------------

  VMware vSphere PowerCLI 5.5 Release 1 build 1295336

  ---------------

  Versions of the snap

  ---------------

  VMWare AutoDeploy PowerCLI component 5.5 build 1262826

  VMWare ImageBuilder PowerCLI component 5.5 build 1262826

  License of VMware PowerCLI component 5.5 build 1265954

  VDS's VMware PowerCLI component 5.5 build 1295334

  VMware vSphere PowerCLI component 5.5 build 1295334

  
  

  4 VirtualCenter version

  VMware vCenter Server Version 5.0.0 Build 913577

  vSphere Client Version 5.0.0 Build 913577

  Hosts: VMware ESXi 5.0.0 Build 914586

  If you need additional information, let me know

  Any help is greatly appreciated

  Thank you!

  -Loincloth

  
  

  
  

  Definition - ErrorAction Stop locally on the cmdlet will not solve the problem. We have found and solved the problem and the fix will be available in the next version. Until then, you can use the $error variable to detect whether the cmdlet was successful or not. You can clear the $error variable before calling the cmdlet and check if it's still empty after the call.

• With Move-VM error: operation is not valid due to the current state of the object.

  I only started shows after update to PowerCLI v5.1.  My vCenter is v5.0.  I saw this when moving virtual machines to a data store in a different data store cluster.  The task submits to vCenter successfully and ends, but the Move-VM errors and returns control to the script or command line that ran.

  $> Move-VM - VM somevm Datastore - somedatastore - confirm: $false
  Move-VM: 13/11/2012-16:07:45 operation Move-VM is not valid due to the current state of the object.
  On line: 1 char: 1
  + Move-VM VM - somevm - data somedatastore store - confirm: $false
  + ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
  + CategoryInfo: NotSpecified: (:)) [Move-VM], VimException)
  + FullyQualifiedErrorId: Core_BaseCmdlet_UnknownError, VMware.VimAutomation.ViCore.Cmdlets.Commands.MoveVM

  I'm puzzled.

  Do you by chance have a PowerShell v2 available somewhere where you can run the same script?

  As much as I know there no official PS still in PowerCLI v3 support, although there are only a few known minor pitfalls.

  While clutching at straws

• Together-NetworkAdapter returning to "operation is not valid due to the current state of the object"

  I'm using fix - up all-NIC in the host servers when a portgroup is renamed.  Demand seems to make the required changes, then crashses.  I don't see any errors in the list recent tasks in vCenter.

  I use the following code:

  Get-VMHost vmware.host | Get - VM | Get-NetworkAdapter | Where {$_.NetworkName - eq "ancien_nom"} |  Together-NetworkAdapter - NetworkName "newname" - confirm: $false
  The error is:
  Together-NetworkAdapter: 17/10/2012 12:16:56 game-card network Operation is not valid due to the current

  State of the object.

  At line: 1 char: 114

  {"+... ancien_nom"} |  Together-NetworkAdapter - NetworkName "newname" - confirm: $false

  +                    ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

  + CategoryInfo: NotSpecified: (:)) [game-NetworkAdapter], VimException)

  + FullyQualifiedErrorId: Core_BaseCmdlet_UnknownError, VMware.VimAutomation.ViCore.Cmdlets.Commands.VirtualDevice.

  SetNetworkAdapter
  It's using PowerCLI 5.1 Release 1 against vCenter 5.0 and 5.0 ESXi.
  Any ideas how or tell you why it's a failure or repair.
  Thank you
  Iain

  No, you should not be a problem.

  Are you by chance using PowerGui?

  There were references to the exact same message when you use an older version of PowerGui and the PowerPack.

  See New - VM error (operation is not valid due to the current state of the object.)

• OracleDataReader: Operation is not valid due to the current state of the object

  Hi all
  
  I am new to using libraries and oracle development tools. I have a project in vb 2010 began when I use the oracleDataReader to read data from my db (10g). by using the following code:
  
  Oradb As String = "xxxxxxxxxxx".
  Dim conn As New OracleConnection (oradb)
  Conn. Open()
  
  Dim test (1000) As String
  Dim counter As Integer = 0
  Dim cmd As New OracleCommand
  
  Connection group conn cmd.
  cmd.CommandText = "table FROM SELECT column where otherColumn > 21 June 11 '.
  cmd.CommandType = CommandType.Text
  Var as OracleDataReader dr = cmd. ExecuteReader()
  Dr. Read()
  test (Counter) = Dr. GetString (0)
  While Dr. Read()
  test (Counter) = Dr. GetString (0)
  Counter = counter + 1
  Loop
  
  cmd ExecuteReader().
  cmd.CommandText = "SELECT FROM table where otherColumn > 21 June NewColumn 11'"
  Dr. Read()
  test (Counter) = Dr. GetString (0)
  
  
  How could change the cmd.CommandText to run new queries? As it is the second command dr.read throws the following error: "operation is not valid due to the current state of the object.
  
  I found stating an another OracleDataReader object will allow me to run another query, I guess that there is a better way to "reset" State of the object first, as opposed to the creation of any new object each time I need to reset the command text.
  
  
  Any ideas are greatly appreciated. Do not forget that I am new to coding, so I know the real C could be cleaned.
  
  Thank you

  ...
  cmd.CommandText = ""
  dr = cmd.ExecuteReader()
  dr.Read()
  ... etc ...
  

  It will be useful,
  Greg

• Adobe Reader Updater is ready to install, but will not install - what's the problem?

  Adobe Reader Updater is ready to install, but will not install - what's the problem?

  It of OK now, sorry for the lack of details, notice of install was a brand new Toshiba Satellite L775 with Windows Home edition purchased a week ago.  When browsing through your site to access help, it is finally installed.

  Thank you very much for answering!