get a windows installation error is not installed correctly during the installation of a 3rd - party in Windows Vista software

Similar Questions

• Windows Installer is not installed correctly during the installation of programs

  I tried all solutions above, but without success.  I can't update Windows, Safari, Skype, Overdrive media, etc.  I have a PC operating windows Vista 32 bit, protection of Trend Micro.  Installer 4.5 Fix is not, for some reason, my and all address configuration downloads respond with a message "does not apply to my system.  This situation occurred last month.

  No matter what I try just doesn't work.  Why?

  Thanks in advance.

  Hello

  1 did you changes to the computer before the show?
  
  2. Once you often get this error message?
   
  3. What are the steps that you have tried to solve this problem?
   
   
   
  Method 1:
   
  I suggest you perform the steps described in the document:
   
  How to solve problems when you install or uninstall programs on a Windows computer
  http://support.Microsoft.com/kb/2438651
   
   
  Method 2:
   
  If the problem persists, turn on your computer in a clean boot state and check the issue
   

  How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7

  http://support.Microsoft.com/kb/929135

  Note: once you are done with the boot, follow step 7 of article to put your computer to normal startup.

  I hope this helps.

• Speakers do not work error: device not installed Base and the data Interface system / no driver found

  I have a Dell Inspiron 1420 and recently upgraded to Windows 7. It had Windows Vista before. Now my speakers do not play, and they did it when I am running Vista. I did some troubleshooting and got messages from Interface to data and not installed for Base system device, but when I click on apply this patch, I get the message no driver found.

  Most often when a device does not work, it is because the driver is damaged. Re-install a new copy should help

  Remove the driver current completely and install the latest driver available.  For instructions on how to do read everything to update the drivers of my partner JMH3143 http://answers.microsoft.com/en-us/windows/wiki/windows_other-hardware/updating-a-driver/a5e6345e-af9b-4099-bef0-8d22254aa1c1?tm=1436753520149 here

  http://Windows.Microsoft.com/en-us/Windows7/update-a-driver-for-hardware-that-isn ' t-work correctly? SignedIn = 1

• Will not install updates during the shutdown procedure

  Using WINDOWS UPDATER - I downloaded and installed the updates on my computer, but the computer needs to reboot / shutdown to complete their installation.

  After trying to stop using the button on the Start Menu of the computer starts the shutdown procedure.
  It starts to install the updates. IE - updates 1 of 8... Update 2 of 8 ect...
  It retains, however, stuck on one of the updates.
  The computer is not freezing, but I left the computer for 24 hours while he was "Installing updates 4 of 8 ' and he never finished installing the update.
  I would like to help with this problem because I can't stop my computer normally right now because it gets stuck on this problem.

  You receive errors related to updates?

  1. Open Windows Update by clicking the Start button, all programs and then click Windows Update.
  2. In the left pane, click view update history.
     http://Windows.Microsoft.com/en-us/Windows-Vista/see-which-Windows-updates-are-installed
  3. Find an update for Windows that has failed to install, and then double-click the update to view more information.
     Updates that have failed to install will display failed under status, next to the name of update.
  4. In the Windows Update dialog box, next to the details of the error, review the error code for the update has failed.
  5. Follow the links in the Windows Update dialog box under more information or help and Support to resolve the problem, then try to reinstall updates by using Windows Update in Control Panel or by mail with the error code and maybe someone may be able to help others.

  What are the error codes and how can I use them?
  http://Windows.Microsoft.com/en-us/Windows-Vista/what-are-error-codes-and-how-can-I-use-them

  Windows update General troubleshooting

  Suggestion:

  How to reset the Windows Update settings?
  http://support.Microsoft.com/kb/971058

• Get the error message - Installation Failure Windows Installer not installed correctly when trying to install iTunes

  Original title: Error Message: microsoft windows install not installed correctly

  I'm running on Windows Vista 64-bit.  When you try to download iTunes for my iPad2 (now!) I get an error message when you have almost finished, saying "failure of the Installation Windows Installer not installed correctly.  I've looked everywhere for help.  Tried the auto-fixit... nothing.  Cannot find on my computer to try to do a uninstall, re - install Windows Installer.  (not quite tech-y to see if this is possible or if it would even help.  Please Please someone share their expertise?  Thank you very much, C.

  Hello

  For telephone assistance from Dell, you can consult the site mentioned below:

  http://www.dell.com/support/incidents/us/en/19/Phone/PhoneTagEntry?c=us&s=dhs&cs=19&l=en.

  For more support options affect the site mentioned below: http://support.dell.com/support/topics/global.aspx/support/dellcare/contact_technical_support?c=us&l=en&s=dhs& ~ ck = nohold'a.

• Windows Vista "Windows Installer service could not be accessed. Windows can run in safe mode or Windows install not installed correctly. »

  * Title *.
  Windows Installer not properly installed

  We just bought a new Dell with Windows Vista.  I tried to download i-tunes and I get the following error: could not access the Windows Installer service.   Windows can run in safe mode or Windows install not installed correctly.  I am not running in safe mode it should be setup of windows.   I am trying to install iTunes 8.0.2 Windows Vista 64-bit.  I found the info to repair Windows XP, but nothing for Vista.  Any help would be GREATLY appreciated.  I'm so frustrated.  Thank you.

  Hi BradandKim,

  We will try to start the Windows Installer service and see if that helps.

  • Click Start orb
  • Right click on computerand then click Manage.
  • If you are prompted for an administrator password or for confirmation, type your password, or click on continue.
  • In the console tree, click Services and Applicationsand then click Services.
  • In the details pane, right-click Windows installand then click Start.

  Let us know if that fixes the problem.

  Brent
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.

• error 14001 itunes not installed correctly, get the Assembly error when you try to reinstall

  installation iTune error

  I tried to install iTunes for the past few days, I have an old one that I have to adjust that give me and error when you try to open "itunes is not installed correctly. "Please re install itunes error 7 (windows error 14001)" so I try to install the new I adjust 10.5 and I get this message

  "a mistake occrred in the installation of the Assembly microsoft.vc80.crt, type is"win32", version +"8.0.50727.6195".publickeytoken ="1fc8b3b9a1e18e3b".
  processorArchitecture = "x 86". See Help and support for more information. HERSULT:0X800736FD ".
  I get very frustrated because I need I tunes to get into my new i pod. I looked for solutions on apple, but nothing came.
  also, I get this error when I try to install the new QuickTime 7.7.1, tried to uninstall itune and whatever it takes like I said here: http://support.apple.com/kb/ht1925, but still, I get the same error when trying to install everything back. I read, you can resolve this error by installing each update Windows but my windows updates also give me an error when I check updates saying ' an error occurred while searching for new updates for your computer or errors found: update code 80080005 windows has encountered an unknown error. " Can someone help me please. I get very frustrated by that. Thanks in advance

  Hello

  I suggest you to return these KB articles and check if it helps.

  http://support.Apple.com/kb/TS3074

  http://support.Apple.com/kb/TS3074

• "I tunes is not installed correctly. Please re - install. "(Error Windows 7-998)

  Original title: Please help, receiving the error msg in windows when you try to use I-tunes
  
  Windows keeps giving me the message "I-tures is not installed correctly. Please re - install. "(Error Windows 7-998). I tried to re - install I-tunes several times, but the Installer seems to be difficult to remove completely and whole system crashes and I have to restart the computer. All this happened when I installed an another norton 360 version 4.0 to replace an expired norton 360 version 4.0 and I was online with them for a long time and they said that this has nothing to do with their software. I'd appreciate any help I can get, thanks

  Hi Matthew,

  It seems that the new version of Norton blocking somehow windows install to work properly.

  I suggest you temporarily uninstall Norton of the machine and then try to uninstall I-tunes of the machine. You can use the Norton removal tool to accomplish the same thing.

  (NOTE: please reinstall your security program once the problem is resolved.)

  Once you are able to uninstall I-tunes, you can go ahead and try to reinstall the same.

  http://www.Apple.com/iTunes/

  Hope the helps of information.

• Error in Windows Media Player, Windows Media Player is not installed correctly and must be reinstalled. You want to install the Player from the Microsoft Website

  I don't know how or why it happened, but one day to another, WMP won't open. I tried to open an MP3 file, and he says that WMP has not been correctly configured "Windows Media Player is not installed correctly and must be reinstalled. Do you want to install the player from the Microsoft Website? ».

  I assumed that since I had to make some updates yesterday, that he was at fault, it had installed an update/new version of WMP and it was either buggy or doesn't work do not, so I went to the Windows updates, but no recent updates on the list had a remote connection with Windows Media Player.

  So, I accept the first proposal of the error message, and I'm headed to the Windows Media Player download page on the Microsoft Website. However, the version I should install (which was the one I already had) has Windows Media Player 12 for Windows 7. But this option is locked for me, and as I tried to install it, it says it is not compatible with my system. Not to mention, it's a whole package and not just the WMP installation.

  I tried everything and nothing seems to work. It won't even let me uninstall WMP because it won't let me open.

  My OS is Windows 7 Home Premium 64-bit. And the error messages that I get to try to launch any WMP feature (the tool, the installation program, no matter what), opens an error window stating that "there is a more recent version of Windows Media (12.0.7601.18150) player already installed on your computer. It is not possible to use and more old (12.0.7601.17514) installation package to install files or repair your current version of the reader. »

  Please, I ask for any intervention in this case.

  This arises from time to time, but I don't think that there is a difficulty of 100%.

  You can try (in no particular order)

  1. uninstall, reboot, reinstall WMP- http://www.howtogeek.com/howto/26107/how-to-reinstall-windows-media-player-in-windows-7-to-solve-problems/ if that doesn't help, try a SFC/scannow check - http://support.microsoft.com/kb/929833
  2. There is this diagnostic tool - http://support2.microsoft.com/mats/windows_media_player_diagnostic/ that can help (from http://support2.microsoft.com/fixit/en-us?wa=wsignin1.0 )
  3. You could try a system restore to a date before the problem occurred to see if that helps - http://windows.microsoft.com/en-us/windows/system-restore-faq#1TC=windows-7 and see if it gets a WMP work back
  4. Last resort, a repair install - http://www.sevenforums.com/tutorials/3413-repair-install.html
  5. Or just simply forget about WMP and try another party 3rd multimedia player that you can install and uninstall at will, as free VLC - http://www.videolan.org/vlc/

  But it may be worth waiting a while to see if someone else has a better solution.

• Error message "the file wmp.dll has a version number of 11.0.5721.5280 where 11.0.5721.5268 was expected. Windows Media Player is not installed correctly and must be reinstalled.

  Original title: I need the Windows Media Player for WinXP 32 bit.

  Recently when I tried to play an Audio CD using Media Player, I get the following message: "the file wmp.dll has a version number of 11.0.5721.5280 where 11.0.5721.5268 was expected. Windows Media Player is not installed correctly and must be reinstalled. You want to install the player from the Microsoft website? "When I clicked 'Yes', the window get Window Media Player appeared that lists the different versions of the operating system Windows however, in the category Windows XP, only the 64-bit version has been registered and I need the Windows XP 32-bit version. Anyone know where I can get the 32 bit version?

  Hi donsor,

  You did it of any material changes or software on the computer before this problem?

  You can follow this link & check if the problem persists.

  After the WMP update you an error of wmploc.dll on version number incorrect

  
  Reference: Windows Media Player is not properly installed and needs to be reinstalled

  Hope the helps of information.
  Please post back and we do know.

• Newbe! How can I correct media windows player error "Not installed correctly" issue?

  I received an attachment in an e-mail message as a .wav file and tried to open it or listen to it.  When I download a zip and try to play, I get this error message telling me that Windows Media Player is not installed correctly and must be reinstalled.  This has been a recurring problem for many years (4).  When I go to windows help page that they ask for a validation code and I don't know where he is. My Dell computer came with pre-installed software. What now?  I am running Windows 7 don't know what rank well.

  Click Start, type toggle windows feature tour

  Press enter

  Extend the functionality of media

  Uncheck Windows Media Player

  Click OK

  Restart when prompted

  Click Start, type toggle windows feature tour

  Press enter

  Extend the functionality of media

  Check Windows Media Player

  Click OK

  Restart when prompted

  Try to play again.

  If the problem persists:

  Click Start
  Type: CMD, according to the results, right-click CMD
  Click on "Run as Administrator"
  At the command prompt, type: sfc/scannow

  This will check for any breach of integrity

  Restart your system

• Will not install driver installer of EPSON Scan (L210) - ' error occurred when installing re start the computer, and then try again.

  Original title: problem installing scanner

  EPSON Scan (L210) setup driver moved - "is an error occurred when installing re start the computer, and then try again.

  Hey there, MAHIPALSINGH143

  Welcome to the Microsoft community forums.

  So that the community help to install your printer, we will need more information. Please answer these questions:

  1. Windows what operating system are you running (Windows 10, 8.1, 7)?
  2. The troubleshooting steps have so you far?
  3. Did you upgrade to a new operating system?
     1. If Yes, what operating system you were on before?

  When you look at the error message, it doesn't look like you need to update your drivers. You will need to go on the official website of manufacturers, with your EPSON.

  Here is the site for the EPSON drivers: http://www.epson.co.uk/gb/en/viewcon/corporatesite/support

  When I entered your model of "Epson Scan (L210)" number, it does not recognize the product. Would you be able to check and make sure that you have provided the correct model number? Your model is a new printer?

  Kind regards

• I get windows install not installed correctly message and I tried everything 2 understand/can't download and install anything like microsoft fixit

  Windows install not installed correctly

  Hi, Itsme18wheels,

  Start > type CMD

  Right click on CMD and select run as administrator

  Type sfc/scannow

  Press enter

  Note: There is a space between sfc and / scannow

  You might your Windows Setup support replace missing or corrupt files

  New attempt to update.  If failure once again, download/install the latest program Windows installation (for your operating system):
  Windows6. 0-KB942288-v2-x 86.msu:

  http://www.Microsoft.com/en-US/Download/details.aspx?ID=8483
  (Download and save it to your desktop, run it.)

  Reset.

  -Or-

  Reset your Windows with this FixIt components update:
  How to reset the Windows Update components?

• I try to install the McGraw Hill software and get an access denied error message. I have contacted the software company, they tell me it's a compatibility issue with Windows Vista and to contact Microsoft.

  I try to install the McGraw Hill software and get an access denied error message.  I have contacted the software company, they tell me it's a compatibility issue with Windows Vista and to contact Microsoft.

  Right-click on the setup.exe > run as admin.

  See you soon. Mick Murphy - Microsoft partner

• Windows Media Player - reading issues error that Windows Media Player is not installed correctly. Reinstall the drive.

  When I click on a song in my library to play, an error message pops up saying "Windows Media Player is not installed correctly. Reinstall the drive.

  I have not had this problem before and it happened the day directly after my computer went through an update of Windows.

  A man ideas, please?

  Hi again Tom

  Windows has released a "remoteness" today update to remedy the situation (new update is kb3024777) so after installing it you can find out all is well again. (If not you could try the suggestion of fabien).

  Regards R