Bought a new Seagate Barracuda ST2000dm001 - need to format as TPG, not MBR - HOW?
This drive seems to be the MBR, same format of Seagate DiskWizard. Windows 7 is not installed on this new disc and gives a message about a UEFI needing to be GPT, MBR.
I tried to use Diskpart to convert, but I'm not doing anything at this point. Any help would be appreciated. What I am doing wrong?
By installing windows (or try) the message says: Windows could not format a partition on disk 0. The error occurred when preparing the partition selected for installation. Error code: 0 x 80070057.
I tried to delete the partitions during installation as instructions of Microsoft said. He made two partitions, a principal that we try to do the installation of. It does not matter that we have reached the next or the Format, and then click Next, always the same error (unable to format). At one point, he gave the above message MBR... to TPG.
What I don't get?
In Diskpart: I selected the disc using the disc list and select the drive and then said to convert a GPT. He said that the specified disk is not convertible. CD-ROM and DVD is examples of discs that are not - convertible (I chose the new HD Seagate 2 TB) so I tried volume selecting volume from the list and select the volume and then convert GPT. Always the same answer not be convertible.
If Windows 7 is installed to a new HD 2 TB raw, and he said he'd be of TPG, so I try to use Diskpart to convert to GPT to MBR, why is it not seeming to work? I use the command Diskpart evil?
Hello
Master boot record (MBR) disks use the standard BIOS partition table. Disks GUID partition table (GPT) using unified extensible firmware interface (UEFI). MBR disks do not support more than four partitions on each disk. The MBR partition method is not recommended for disks larger than 2 terabytes.
Transform a boot drive primary in a disc of Table of Partition GUID
http://TechNet.Microsoft.com/en-us/library/cc725671.aspx#BKMK_CMD
I also suggest you to report the issue in the Seagate forums to get information on how to convert the hard disk.
http://forums.Seagate.com/T5/Barracuda-XT-Barracuda-Barracuda/BD-p/ata_drives
Hope this information helps.
Tags: Windows
Similar Questions
-
I have a version of the education of the CSuite 6 design and web premium. Bought a new mac without DVD drive and now I have no idea how I can install it on my laptop. S/N does not seem to work. Can anyone help?
CS6 - http://helpx.adobe.com/x-productkb/policy-pricing/cs6-product-downloads.html
You can also download the demo version of the software through the page linked below and then use your current serial number to activate it.
Don't forget to follow the steps described in the Note: very important Instructions in the section on the pages of this site download and have cookies turned on in your browser, otherwise the download will not work correctly.
CS6: http://prodesigntools.com/adobe-cs6-direct-download-links.html
-
photoshop elements I bought a ret of opportunity program and the serial number is not good how to
Good evening
photoshop elements I bought a ret of opportunity program and the serial number is not good how?
Please thank you
PS I don't have the means to buy United Nations
Find the serial number of your Adobe product quickly
Error: "serial number is not valid for this product". Adobe Creative Suite
-
Bought a new dell battery and still my laptop battery does not charge.
Hello.
I am using a Dell inspiron 1545 for about 3 years now and exactly after 2 years of my purchase, the battery has failed and it began to show me to replace the battery and always informed to contact me dell for a new battery.
I took this to a lot of trouble, so I simply ignored the message and kept using my battery with my wired adapter. After 4-5 months of such uses, my battery has completely failed and does not give me even even a minute of backup, when I remove the power outlet. Then I realized the importance of a new battery and then bought a new battery from Dell.
Its the same battery with the same features and also the same type family. After that I removed my faulty battery, I replaced my purchased new Dell battery and realized that my battery works fine. his load well, but at one point, it says "plugged in, but do not load" which is rare for a new battery, that is purchased new.
This is what it looks like now once I removed the plug adapter and when I depend on the backup battery. It provides a backup, but I see a Mark exclamatory yellow next to her. Which I think should not be present. He also says "Low battery" when there are already some 99% battery left!
I also followed a few steps online
(1) update the BIOS for the last 2) followed by a few other steps such as uninstall the ACI battery in Device Manager and etc...
I'd like to get this problem is solved. I use an adapter family PA-12, which is also replaced. So any help on resolving the issue would be appreciated.
Thank you!
Hey maxim. I have actually FIXED this month back, problem. and I want exactly help on it so that you can fix it yourself too...
the problem that is the creation of your battery to display an exclamatory mark is your power settings.
then follow these steps to get rid of this sign and a battery to work perfectly.
1) click the icon of your battery (left click), you should see an option called "Power Options more' at the bottom of the pop-up window.
Click on 'more power Options.
(2) now, you will be taken to your control panel where you can see all of your power plans and under each plan, you will see an option called "Change plan settings"
3) click on "Change plan settings" for your active power plan. Now you will be redirected to another window of Control Panel, where you can see two types of power options to get adjusted. in other words, when you battery is connected and when your battery is disconnected.
(4) do not touch these options, simply click on 'Change power avancΘs' at the bottom left of this window. THIS IS THE AREA WHERE WE HAVE TO FIX!
(5) after that you click "Change advanced power settings", you will see a POWER options window, go down and then you can see what is called "Stack" with a sign to the left. until it clicks.
(6) now, you just change the levels for the following values
--> Critical battery level (you can change it to 10%)
---> Low battery (you can change it at 20%)
Now once who did, YOU will BE No. LONGER SEE THE EXCLAMATIVE MARK on YOUR STACK!
So I hope it works!
Answer me when you've managed to fix.
-
I bought a new computer and you need to reinstall photoshop
How can I get help to reinstall photoshop on a new computer?
You install exactly in the same way you did the 1st time... Put your disc in the drive, and enter your serial number when asked
Download & install instructions https://forums.adobe.com/thread/2003339 can help
-includes a link to access a page to download the Adobe programs if you do not have a disk or drive
- or kglad links in response to #1 here can help https://forums.adobe.com/thread/2017859
Also go to https://forums.adobe.com/community/creative_cloud/creative_cloud_faq
- and also read https://forums.adobe.com/thread/1146459
-
I lighroom on my old computer, which borrows my daughter, and I need to download to my new computer. I don't need to transfer my previous files, I just want to start fees on my new computer. How can I do this?
Download, install and activate with your serial number
Lightroom - all versions
Windows
http://www.Adobe.com/support/downloads/product.jsp?product=113&platform=Windows
Mac
http://www.Adobe.com/support/downloads/product.jsp?product=113&platform=Macintosh
-
My iphone 5 c is about to die if I have to get a new phone. But I have text messages that I can't lose. How can I keep a copy of my messages before they dissappeares when my 5 c dies completely
Old backup phone. Restore that backup on the new phone. Easy. Fact.
-
I've updated all but still, it won't work
Hi Daniel,.
I suggest you to install the validity fingerprint sensor driver to get the finger print sensor option in Control Panel. Here is the link for our reference.
Then, you need to install the Manager software security tools to protect for the finger print job. Go through the link:
Then you must install the player 3D HP 5 guard to protect the drive against damage in case the laptop is hit hard or fall from a low height, by parking the heads.
You can also refer to the thread for your reference.
If you have other questions related to the issue, then I suggest you to contact HP support. They would help you better.
Back to us for any other questions related to Windows.
-
I have an advent 7083 laptop, Windows XP with AVG anti Virus Protection (which lapsed). I want to install Norton Gold Edition. When I tried to install Norton on my PC (eMachines) basics of Vista, my PC shuts down and won't let me restore or do something else. A message appears on the screen of the PC to say: a problem has been detected and Windows has been closed to avoid damaging your PC.
If this is the first time you've seen this STOP error screen, restart your computer. Check that any hardware or software is installed correctly. If problems continue, disable or remove any newly installed Hardware/Software. Disable the BIOS memory options such as implementing caching or shading...
Technical information: Stop: 0X0000C1F5 (0x00000000) (0x00000000) (0x00000000) (0x00000000)
I used F8 and safe mode, nothing works. PC returns to the top of the screen. Any ideas?So therefore my insecurity about the installation of Norton on laptop.If anyone with any of the foregoing, I would appreciate it.Thank youAlemap :)I suggest you uninstall the program. Uninstall or change a program
After uninstalling, you can try the AVG removal tool at: http://www.avg.com/ww-en/utilities>
UTC/GMT is 11:44 Thursday, December 13, 2012
-
Need to Format, any serious, not from Vista DVD with pc problem
I bought a m8300f HP from Circuit City last year. It's a great PC. I had the fire-dog team (the equivalent of Best Buy Geek Squad) install a nVidia GeForce 8800 GT video card in the computer, because the lack of a decent video card is the only complaint I had. They have done professionally without voiding the warranty.
It's been a year now, I moved away from this place of Circuit City, and the company will also slowly out of business. I'm here, and my computer is having a problem. It is with direct X or something else like a virus. Be that as it may, I am unable to run 80% of games on my PC (it's almost 30 games old like System Shock 2 and as new as Crysis Warhead).
This isn't my problem. I do not in the face of that, I'm looking at the Format Office (as I've been meaning to for a month or two now) which will probably solve some problem I have (aka get rid of the virus, where it exists - and I scanned twice - or start over from scratch with direct-X.)
Here's my problem: I want to format drives C and E of the desktop computer, which normally is easy, HOWEVER:
1. the office is bought in-store, so I had no DVD installation Vista or Vista Serial Key #. I don't have installation CD
2. I never had any type of installation CD for my card GeForce 8800 video Circuit City installed without extra cost other than the purchase price.
3. I have NO installation CD for ANY program, any driver, whatever it is. I have a desktop computer that needs reformatting and nothing more than that. No CD, no papers with n ° of series's. absolutely nothing.
What can I do? It is even POSSIBLE to format? Can I save Vista and all the drivers required to install once it has finished formatting?
Or am I "screwed"?
I look forward to a response and I can answer any additional questions. I have all day free and I have 35 DVD-R and CD - R 50, just in case I have to save something.
Help?
Message edited by Wek11 on 02/28/2009 10:07Edit: I have Word from someone else that I don't need any other CD for my desktop PC. I use the onboard sound of my motherboard. They told me that my nVidia card I could get the drivers on the internet and I could do the same thing for my processor etc. He's right? He said everything I need to worry is to get my vista OS re-installed, and after that the computer runs like new?Message edited by Wek11 on 02/28/2009 10:16In fact, I just started my pc and found the Recovery Manager of the system that supposedly it resets to factory settings and re installed Vista on its own.
We'll see if it actually works. Thanks if. I appreciate the help, better phone service who was trying to charge me $ 100 to renew my warranty of the phone support when all I need to know had nothing to do with HP, and everything to do with the way Windows works
-
just what I said. my old shorted out laptop screen - my support tech (which are closed now) has transferred all old laptop again laptop information - there is a collection case which, in my view, has the old bookmarks. When I added to firefox for the new portable computer bookmarks do not come to the top.
You can search in your collection to a folder named bookmarkbackupsfolder? It should contain files with similar names to:
bookmarks-2013-08-11.json
Assuming that you find these files, this article describes how to restore them on your new installation of Firefox: restoring bookmarks from a backup or move them to another computer. Please note that the restore function replaces all bookmarks that you can add to your new installation. If you need to keep those, you can do an import and export through the HTML format. This message has the steps: https://support.mozilla.org/questions/966986#answer-463938.
Edit: My apologies for typo in bookmarkbackups's fault.
-
I don't know how to install a printer on my new PC. The printer is a Canon MG5320, who is a year and work well with my computer discarded. Now I have a new HP Pavilion p6 PC - 2316 s and I can not print from it until it is installed. The printer is on and ready, but does not appear on my computer screen as it did on the old computer... Help!
[Moved from comments]
Hi Aggietol,
- Visit the website of Canon Pixma MG5320 & driver software
- Select the operating system ==> Windows
- Select the Version of the OS ==> 'Windows 8' If you have a 32-bit version of Windows 'Windows 8 (x 64)' otherwise
- Click on the arrow of drivers
- If your printer is connected directly to your PC, select "MG5300 series MP Driver worm." 1.00 has (8/8 windows... «. If it is connected through your local network, select "MG5300 Series Mini Master of installation (Windows 8/8 x 6..."
- ...
Hope this helps at & answers your question.
See you soon
LZ.
-
Need help with - I do not KNOW HOW TO CALL IT - presentation
Hello everyone,
you know, how to do: Bershka ? I mean, I like that you have more pages in full screen below themselves. Someone can help me with this, or is a tutorial how to do on this world?
Thank you to
C.
More video tutorials on Parallax scrolling and how to implement the same in Adobe Muse:
Discover the new scrolling parallax with Adobe Muse CC | Design creative cloud | Adobe TV
https://helpx.Adobe.com/Muse/how-to/scroll-effects-motion.html
https://helpx.Adobe.com/Muse/how-to/explore-new-scroll-effects.html
-
I can't import my Canon XF100 files in FCP. I downloaded the Canon XF utility, but do not understand how it works. I work with a 24 inch Mac (2009), 8 GB of memory running with El Capitan 10.11.6
Make sure that the last formats video Prois installed.
Russ
-
Problems with the laptop. I would like to format the hard drive, but I have no disk Windows Vista. Help?
You are the very welcome, Leon.
Maybe you are looking for
-
How to stop notifications of expiring session icloud
Teas are pretty frustrating.
-
How can I get the toolbar printing more "BOLD" or a little bigger?
I tried settings, looked through all the Options of the Option. Changed the font under the content.
-
L830 satellite - built-in microphone and webcam not working
Computer: Toshiba Satellite L830-10NPlatform: Windows 7 Hi guys,.I have problems with my integraed microphone and webcam. All of a sudden out of nowhere, it wouldn't work. I tried to restore the system to go to a previous point where I worked, I inst
-
Could you recommend model HP laptop for Linux
I'll buy a new laptop. The main requirements are Chipset AMD; GPU Radeon HD; operating system is Linux (Kubuntu). The purpose of the laptop is a programming and calculations with the help of the GPU (MATLAB, Maple, OpenCL applications). A liilte bit
-
When I turn on my computer, I get control + ALT + DELETE on my screen before I can log on, how can I get rid of this?