Boxes do not behave as expected

Similar Questions

• Display.screenshot does not behave as expected

  Hello

  The Display.screenshot method doesn't seem to work as expected. When I call this method, I got the dialog box asking the user or not to allow a screen capture to take. If the user selects Hello but leaves theDo ask not agai box unchecked, the screenshot is not taken. If, however, select 'allow' and check the box "Do not ask again" the screenshot is taken. Maybe that's a problem with the dialog box?

  Here is my code below-
  try {}
  Display.screenshot (this.bitmap, 0,0, Display.getWidth (), Display.getHeight ());
  }
  /**
  * If the user does not have a screen capture taken just display the General image
  */
  {} catch (ControlledAccessException cae)
  This.Bitmap = Constants.BACKGROUND_IMAGE;
  }

  Depends on how you code.

  Personally I d code it as follows:

  (a) have an indicator of persistent screenshot with three States

  0 - does not define

  -1 can't screenshot

  1 is allowed to the screenshot.

  Check this box if you are about to make a screenshot.  In this case - 1 indicate to the user that they have disabled this function be selected permissions.  If it's 0 or + 1, check the permissions API to see if you are allowed to do.  If you are, then set the value to 1 and do.  If you're not, tell them that they need to enable and display the permissions API.  When that is saved, check again.  If they helped him, set the indicator 1 and continue.  If they don't have not enabled it, it the value - 1 and tell them that you can't capture screens because they were disabled.

  Not sure which covers all cases, but you get the idea.

  Ok?

• Return newline and carriage return not behave as expected.

  In my PDF file I have a multiline form called OutputText and when I put its value it does not display properly. In the debugger I type is:

  this.getField("OutputText").value = "hello\nthere!"

  or

  this.getField("OutputText").value = "hello\rthere!"

  Then, after Ctrl + Enter, the debugger displays

  Hello

  here!

  but the OutputText shows:

  Hello

  here!

  The exhaust of the \n and \r characters do not behave properly, they seem to be removing the character following that escaped.

  Anyone has any idea why?

  I started again with a new PDF and new form, with no other writing and got the same results.

  I used under Tools\Content, select an object to change the properties of the text field.

  When I activated the option for "allow Rich Text Formatting' the first following letter each instance of '\n' and '\r' appeared and disappears from the text box.

  I don't know yet how the \n and \r are supposed to behave, but at least there is a reason.

• Venue 11 Pro - Slim keyboard do not behave as expected, or it must.

  I recently received a dell flat keyboard for my 11 Pro - Baytrail tablet coming.    Overall, I like the quality and functionality, although I also like others encountered the intermittent non-functional keyboard, but this isn't the subject of this post.

  I noticed a few things in his behavior that do not work as you might expect, and I hope that can be corrected through the software.

  1. when the keyboard is connected but folded behind the Tablet back (that is to say the keyboard is not in use) keyboard on screen does not appear.  Which makes it difficult to use the device as a tablet like whenever the data entry is required you must unfold the keyboard and hold it down somehow while you type, then fold back behind the screen to continue the use of the tablet.   When folding keyboard behind the unit of its equally important to set the keyboard to display on layout as it should stop the keyboard itself to operate, right now the keyboard no longer works as it should be unless an alternative entry is available.

  2. in the same way as #1.  When the keyboard is attached, but folded back behind the orientation of the Tablet is locked if the screen does not turn in portrait or landscape mode if necessary.  So, if you carried it with the lid / slim keyboard on and open it upwards, folding of behind the screen, the keyboard is locked in landscape mode.   The only method I've found to change his orientation is to go to the desktop and run the application of graphics intel to change direction.

  Combined makes the slim keyboard worse than useless in several scenarios of use.   I want the keyboard slim for the occasional need to enter more data as possible on the touchscreen AND protect the tablet... but if your use is more compressed than laptop, you'll find yourself constantly work around these limitations.

  You have a great product here, but you really need to take a page from the playbook of the surface here.   They sort of set the standard and expectations for how keyboard covers on tablets should work, and although I really like the material usage is clumsy, in its current form.

  Glad to hear you guys are to find some kind of workaround for this.  About the requested changes, I've confirmed with engineering teams that unfortunately these elements are not possible given the current design of equipment.   They are documented for future products however.   Appreciate all the comments on this issue and my apologies for not being able to provide a solution for this product.

• Laboratory of port security exercise - do not behave as expected.

  Hello

  I'm working on a CCENT training lab to demonstrate the configuration of port security.

  I have a Catalyst 3550 switch software Cisco's IOS, software of C3550 (C3550-IPSERVICESK9-M), SE Version 12.2 (52), VERSION of the SOFTWARE (fc3). I have two computers connected on ports fa0/1 and fa0/2 with IP addresses of 10.0.0.20/24 and 10.0.0.12/24 respectively. Without active port security, each computer can ping successfully the other.

  As soon as I change the configuration to add port security on fa0/1 I am not able to ping between the two computers, nor can I ping 10.0.0.20 from the console of the switch, but I don't know why! If I delete it again the pings succeed again.

  I expect that the switch must learn the computer connected to fa0/1 MAC and stop if there is subsequently any traffic from another Mac.

  Interestingly, the 'show mac address-table' command shows that the MAC connected to fa0/1 when port security is not enabled. I don't know if this is relevant.

  Can someone help me diagnose what is happening?

  Thank you.

  Configuration before change:

  interface FastEthernet0/1

  switchport mode access

  Speed 100

  full duplex

  spanning tree portfast

  !

  interface FastEthernet0/2

  switchport mode access

  Speed 100

  full duplex

  spanning tree portfast

  !

  Configuration after modification:

  interface FastEthernet0/1

  switchport mode access

  switchport port-security

  Speed 100

  full duplex

  spanning tree portfast

  !

  interface FastEthernet0/2

  switchport mode access

  Speed 100

  full duplex

  spanning tree portfast

  !

  Other diagnoses (after change):

  S1 # show ip interface brief

  Interface IP-Address OK? Method State Protocol

  Vlan1 10.0.0.5 YES NVRAM up up

  FastEthernet0/1 no YES unset upward, upward

  FastEthernet0/2 not assigned YES unset upward, upward

  #show S1 port-security

  Secure the security Port MaxSecureAddr CurrentAddr SecurityViolation Action

  (County)       (County)          (County)

  ---------------------------------------------------------------------------

  FA0/1 1 0 0 stop

  ---------------------------------------------------------------------------

  Total addresses in the system (with the exception of a mac per port): 0

  Limit Max addresses in the system (with the exception of a mac per port): 5120

  S1 #show - interface fa0/1 port security

  Port security: enabled

  Port State: Secure-up

  Mode of violation: stop

  Aging time: 0 mins

  Type of aging: absolute

  Aging of SecureStatic address: disabled

  Maximum MAC addresses: 1

  MAC addresses total: 0

  Configured MAC addresses: 0

  Sticky MAC addresses: 0

  Last Source address: Vlan: 0000.0000.0000:0

  Security Violation count: 0

  S1 #show interfaces fa0/1

  FastEthernet0/1 is up, line protocol is up (connected)

  Material is Fast Ethernet, the address is 000f.f796.d781 (bia 000f.f796.d781)

  MTU 1500 bytes, BW 100000 Kbit, DLY 100 usec,

  reliability 255/255, txload 1/255, rxload 1/255

  Encapsulation ARPA, loopback not set

  KeepAlive set (10 sec)

  Full-duplex, 100 MB/s, media type is 10/100BaseTX

  input stream control is turned off, output flow control is not supported

  Type of the ARP: ARPA, ARP Timeout 04:00

  Last entry exit ever, 00:00:01, blocking exit ever

  Final cleaning of "show interface" counters never

  Input queue: 0/75/0/0 (size/max/drops/dumps); Total output drops: 0

  Strategy of queues: fifo

  Output queue: 0/0 (size/max)

  5 minute input rate 0 bps, 0 packets/s

  5 minute output rate 0 bps, 0 packets/s

  3494 packets input, 587250 bytes, 0 no buffer

  Received 1593 broadcasts (0 multicasts)

  0 Runts, 0 giants, 0 shifters

  entry 0, 0 CRC errors, frame 0, saturation 0, 0 ignored

  0 watchdog, 1254 multicast, break 0 comments

  entry packets 0 with condition of dribble detected

  39631 packets output, 3311977 bytes, 0 underruns

  0 output errors, 0 collisions, 1 interface resets

  0 babbles, collision end 0, 0 deferred

  carrier, 0 no carrier, lost 0 0 output BREAK

  output buffer, the output buffers 0 permuted 0 failures

  #show mac address table S1 | include DYN

  1 b827.ebed.e2d9 DYNAMICS Fa0/2

  S1 #show ip arp

  Protocol of age (min) address Addr Type Interface equipment

  Internet 10.0.0.12 5 b827.ebed.e2d9 ARPA Vlan1

  Internet 10.0.0.5 - 000f.f796.d780 ARPA Vlan1

  Internet 10.0.0.20 32 10dd.b1f1.0c64 ARPA Vlan1

  Do you have any other platform to configure your lab? because it should work ideally and the configuration is fine. However, to complete your lab, you already have workaround...

  I suspect that this question is something related to the hardware you use or due to a BUG.

  Please note the useful comment

• RegEx does not behave as expected

  Hello, all,.

  I think I may have posted about this, before, but received no response; I have to (unfortunately), then try again.

  I use a regular Expression to map the complete physical location on the hard disk where the site is located.  I need this for a CFFILE tag.

  I use a regular expression instead of hard coding the location is because the location varies depending on whether it is used in the production, development or put in scene.  (Yes, I know, all three should be mirrors of each other - I'm working on it.)  )

  For example, our DEV environment should the CFFILE tag to point to the E:\ColdFusion10\cfusion\wwwroot\www\ folder.

  Our environment needs the CFFILE tag to point to the C:\ColdFusion10\cfusion\www\ folder.

  Our production environment should the CFFILE to point to the F:\webdocs\cf\www\docs\ folder.

  I don't want to really be hackers on this matter and use CFIF or CFSWITCH to set the variable 'this.webrootmapping '.  In addition, if nothing is changed, I have to come in and change the code.  Is not ideal.

  So, I use a regular expression.  I'll also put it so that it will always point to the ROOT, no matter what subfolder, the user is in.

  What I (and does not work for the production environment) is:

  <cfset this.webrootmapping = REreplaceNoCase(ExpandPath('./'),
             '(.+[\\|\/]www([\\|\/]docs)?[\\|\/])(.+)',
             '\1',
             'all') />
  

  EC that it is supposed to do, is accept all the folder "www" or "www\docs" folder and delete all after that.

  It's in dev and staging; It does NOT work in production (where the root ends in "\docs\".)  The question mark must be indicating "zero or one \docs".  But it's not.

  Any idea is appreciated.

  V/r,

  ^_^

  * headdesk *.
  * headdesk *.
  * headdesk *.
  * headdesk *.
  * headdesk *.

  * HEADDESK *.

  He begins to slowly kill me the way I type everything and then it solves itself somehow.

  * headdesk *.
  * headdesk *.
  * headdesk *.

  I experience something of VERY, VERY simple, and it is now resolved.

  * headdesk *.
  * headdesk *.
  * headdesk *.

  I'll share it with you, after I'm done banging my head into my office.

  * headdesk *.
  * headdesk *.
  * headdesk *.
  * headdesk *.
  * headdesk *.
  * headdesk *.
  * headdesk *.
  * headdesk *.
  * headdesk *.
  * headdesk *.

  The last '+' (one or more) has been replaced by ' *' (zero or more) and it worked.  Just in case someone else is going through this problem and spend weeks or months trying to understand.

  * headdesk *.
  * headdesk *.
  * headdesk *.

  I need a NAP, now.

  * headdesk *.
  * headdesk *.
  * headdesk *.

  Good night.

  V/r,

  ^_^

  * headdesk *.
  * headdesk *.
  * headdesk *.

• Scattergraph MoveCursor method does not behave as expected

  I'm trying to do something very simple: essentially keep the cursor on the last point being traced all trying to trace several scatterplots. Here is a snippet of code where I put the cursor properties:

  ********************************************************************************************************************************************************************************

  internal NationalInstruments.UI.WindowsForms.ScatterGraph sgImpedance;

  private list m_ZDataPlots = new list (); //clsZofFDataType is a class that represents the data in a conspiracy.

  ... / / more code follows here

  ...

  sgImpedance.Cursors [0]. Plot = sgImpedance.Plots [m_ZDataPlots.Count - 1]; sgImpedance is a scattergraph initialized as above
  sgImpedance.Cursors [0]. Color = newColor;
  sgImpedance.Cursors [0]. SnapMode = CursorSnapMode.NearestPoint;

  If (sgImpedance.Plots [m_ZDataPlots.Count - 1].) HistoryCount > 1)
  sgImpedance.Cursors [0]. MoveCursor (sgImpedance.Plots [m_ZDataPlots.Count - 1].) HistoryCount - 1);
  on the other
  sgImpedance.Cursors [0]. MoveCursor (0);

  ********************************************************************************************************************************************************************************

  The cursor keeps however remain at the centre of the plot; It is on the correct path but it is never the last traces. Is there any attribute I need to, or an event that should be raised so that the cursor to stay on the current point being traced? I have attached a screenshot to show what is happening.

  Any help will be appreciated. If I need to elaborate further, please let me know. Thank you very much!

  Can you provide an example of a code so I can reproduce the behavior on my end?

• Contextual dialog box before you call network - not in the EXPECTED order

  In my application, I would like to display a dialog box, while the application is retrieving data from a web server.  What I find is that the dialog box is not displayed until the data recovery is complete.  Don't know what I'm doing wrong, but here are my code snippets.  Suggestions are appreciated.

  public class HomeScreen extends MainScreen  {
  
      private ImageScreen imageScreen;
  
      private MenuItem  viewImage = new MenuItem("View Image",100,10) {
        public void run() {
              imageScreen = new ImageScreen();            UiApplication.getUiApplication().pushScreen(imageScreen);
           imageScreen.getImage();
        }
      };}
  
  public class  ImageScreen extends MainScreen {   private Dialog statusDlg; 
  
     public ImageScreen() {           statusDlg = new Dialog("Loading...",null,null,0,icon);       
  
         // some other initializations here   } 
  
      public void getImage() throws Exception {        statusDlg.show();
  
          // create the connection...        HttpConnection conn = (HttpConnection) Connector.open(URL,Connector.READ_WRITE, true);        conn.setRequestMethod(HttpConnection.POST);
  
          // set paramters and write out requests here        .        .        .
  
          // open input stream to get response from server        InputStream in = conn.openInputStream();
  
          // process the response        processResponse(conn.getResponseCode(), in);          
  
          // close everything out        .        .    }  
  
      public void processResponse(final int HTTPResponseCode, final InputStream inputStream)     {
  
        UiApplication.getUiApplication().invokeLater(new Runnable() {        public void run()        {          statusDlg.close();
  
            // process response here          .          .          .        }      });        }    
  
  }
  

  I want to see is a blank screen with a pop - up dialog box indicating that the data is "Loading"... ", while imageScreen.getImage () is executed (I voluntarily added latency in my HTTP response to simulate the network latency).  But instead, I see that the application remains on the screen (home screen), while the data are read.  Once the data is extracted, the new screen (ImageScreen) is displayed and the dialog box opens for a fraction of a second.

  I hope this makes sense.  I can clarify more, otherwise.

  It's because you make blocking network operation of e/s on the event thread (aka user interface thread). The getImage method is called on the thread of the event, this method calls the blocking network i/o operation. After processing the event of the user interface that caused the getImage method is called, the event thread starts processing the next events, which tells the OS to display your popup. This, obvsiouly, doesn't happen until GetImage ends.

  What GetImage should probably do is network IO unloading in another thread (for example, starting a new thread).

• The value of minimum height of page behaves as expected

  I created my site with a minimum height of 500 px. I have added content to the homepage which exceeds the value of minimum height of 500px.  I added not yet any content to any other pages.  Therefore, in Design view empty pages only have a height of 500px: (they behave as expected as shown below)

  

  However, when I Preview or publish the site, empty pages take on the height of the homepage even if they don't contain any content:

  

  Can someone explain why this is happening?

  Very probably "Sticky Footer" is enabled in the properties of the Page [rt - click on the page in Design view]. Uncheck the box.

• Filtering the name of e/s dialog box is not coming

  Hello

  The name IO filtering dialog box does not appear. My will becomes highlighted and that's it. I saw this issue appear on the forums before with no solution other than the new facility. I'm working on a Win 7 with LabView 15 machine.

  So far I have tried:

  Restore the control loading and constant of e/s name filtering of the block diagram

  New VI in a new project

  Repair of LabView 15

  Install LabView fresh 16

  Repair of LabView 16

  DAQmx at 16 update

  Equipment connected

  Equipment disconnected

  Only that I found so far is a creation of a control off a DAQmx Read VI with the relevant config.

  Is this a known problem or did I misconfigured something?

  Thank you

  Denis

  Denis.Vashuk wrote:

  Yes, it's the missing part. I did a complete uninstall of LabView and DAQmx and reinstalled LabView first, then DAQmx. I still get no dialog box.

  This is strange!  If I have certainly seen issue LabVIEW installations (Hello, LabVIEW 2011).  Here are some suggestions for what to do when bad LabVIEW installed (I'm assuming Windows 7):

  • Start by going to the Control Panel control, OR software and click on delete all.
  • Important - when it has finished, reboot!
  • Install just LabVIEW (VIPM, if you want).  Reset.
  • Install only the toolkits and Modules you need (no drivers!).  Reset.
  • Just install the drivers you need.  Reset.
  • Open License Manager OR and to ensure that the products you need have showing them "Buttons license" in dark green.

  I just did this with my system.  Curiously, Acquisition of Vision software was green pale, but Vision Development Module is dark green (and Vision seems to work).

  Also check out MAX and make sure that the Software Modules that you expect are present.  If something seems "missing", report it here...

  Bob Schor

• Windows Installer error - "there is a problem with this Windows Installer package. A program run as part of the Setup did not finish as expected.

  When trying to install a new control software and data package my Hyperion charger I get this error message "there is a problem with this Windows Installer package. A program run as part of the Setup did not finish as expected. Contact your supplier of staff or the package of support ".

  ---------------------

  Troubleshoot Windows install

  2438651 how to solve problems that may occur when you install, uninstall, or upgrade a program on a Windows computer

  http://support.Microsoft.com/kb/2438651

  Substitute:

  Unregister Windows Installer and then reregister Windows Installer. To do this, follow these steps:

  1. in the menu 'Start', click on ' execute:.»

  2. in the "Open" box, type "msiexec /unreg", and then press ENTER.

  3. in the menu 'Start', click 'run '.

  4. in the "Open" box, type "msiexec/regserver", and then press ENTER.

  Click Start Orb, in the box, type search: Regedit.

  Highlight: HKEY_lOCAL_MACHINE/SYSTEM/CurrentControlSet/services/msiserver

  Verify that the SYSTEM account has full control. If it does not, add the SYSTEM account with full control.

  Change the settings of the REGISTRY can cause serious problems that may prevent your computer from starting properly. Microsoft cannot guarantee that problems resulting from the REGISTRY settings configuration can be solved. Changes to these settings are at your own risk.

• PL/SQL error: ORA-00923: KEYWORD not found where expected

  Hi all

  I get this error when I generate the code mentioned bellow.

  Error of calculation of the value of the default element for the element on the page P1_JORNADA_ANUAL.

  ORA-06550: line 42, column 17: PL/SQL: ORA-00923: THE KEYWORD not found where expected to ORA-06550: line 8, column 1: PL/SQL: statement ignored

  
  

  Code:

  
  

  --------------------------------------------------------------------------------------------
  

  DECLARE

  L_EMPRESA B_LISTA_EMPLEADOS. EMPRESA % TYPE;

  BEGIN

  Select case when ((select EMPRESA

  of B_LISTA_EMPLEADOS

  where USERNAME = v('APP_USER'))) = "EMPRESA1".

  then ((select to_char (JORNADA_ANUAL)

  of B_JORNADAS_Y_RATIOS

  where CATEGORY = (())

  Select the CATEGORY

  of B_LISTA_EMPLEADOS

  where username = v('APP_USER')

  ))

  and EMPRESA = (())

  Select the EMPRESA

  of B_LISTA_EMPLEADOS

  where username = v('APP_USER')

  ))

  and ANO = v ('P1_ANO')

  ))

  When ((select EMPRESA

  of B_LISTA_EMPLEADOS

  where USERNAME =: APP_USER)) = "EMPRESA2".

  then "EMPRESA2 Jornada.

  When ((select EMPRESA

  of B_LISTA_EMPLEADOS

  where USERNAME =: APP_USER)) = "EMPRESA3".

  then "EMPRESA3 Jornada.

  else 'Empresa desconocida '.

  end

  in L_EMPRESA

  like the Jornada

  of B_JORNADAS_Y_RATIOS

  The COMPANY group

  RETURN L_EMPRESA;

  EXCEPTION

  WHEN NO_DATA_FOUND THEN

  RETURNS A NULL VALUE.

  END;

  --------------------------------------------------------------------------------------------
  

  
  

  Does anyone know who or where is the error?

  
  

  Thank you very much.

  
  

  Concerning
  

  
  

  Also

  Check this box...

  IN

  L_EMPRESA AS Jornada

  you send a value to the variable, if no name alias need here.

  use like this.

  IN

  L_EMPRESA

  Of

• Adobe Acrobat Pro XI do not behave properly after winning 10 update

  Since the upgrade to Windows 10 XI of Acrobat Pro does not behave correctly.

  1. when I click on piece attached in an e-mail to open or make a right-click to print it always asks to open or save.  He has not done this before and I don't want to ask.

  2. when I print in PDF is no longer he wonder where to save it and I can't name the file as I want.  He saved just in my office, which is good, but I could always give the file a name and now I can't.

  3. when I try to close one of my PDF creations now I always get a box on the removal of hidden information and I have to click and option.  I just that it closes when I close.

  I looked everywhere in the program and updated (11.0.13) and repair the installation.  How can I get to behave like before without having to click, click so much?

  Thank you in advance!

  Hi Sheraldia,

  1. Please disable and enable Adobe Acrobat add-in for Outlook by clicking file > Options > Add-Ins

  2. to change the settings of the Adobe PDF printer so that he asked for the name and location,

  Go to the devices & Printers

  Right-click on the Adobe PDF printer select Printing Preferences

  Adobe PDF output folder in the drop-down list, select Prompt for Adobe PDF filename

  Click apply & OK

  3. for the last of them, please share any screenshot or PDF file.

  Thank you

  Abhishek

• The edit preferences dialog box will not appear in Lightroom 6 - system 64-bit Windows 8.1

  When I select EDIT-Preferences dialog box does not appear.    What I am doing wrong?

  Two other things to try:

  A preferences. Reset LR, as described in this article: reset the lightroom - updated - Lightroom Forums preferences file. LR is not uncommon soil its file preferences, and when that happens, it will behave unpredictably.  (The preferences are not reset when you reinstall LR.)

  B. manually edit the preferences file to disable the use of LR of the graphics processor, as described in this article help: using Adobe Photoshop Lightroom | Graphics processor (GPU) acceleration, troubleshooting & FAQ Lightroom.  A little more detail about the steps in this article:

  1. Release of Lightroom.
  2. Click on the Start button in the lower left corner and copy them and paste "%appdata%\Adobe\Lightroom\Preferences\Lightroom 6 Preferences.agprefs" (without the quotes) in the search box, and then type Enter. This will open the preferences file in Notepad.
  3. Change the following line: useAutoBahn = true to the useAutoBahn next = false
  4. File > Save followed by file > exit.
  5. Restart Lightroom CC/6

• Multiple selection box is not showing is not the values passed to grid?

  ColdFusion 8

  I've inherited an application and I try to maintain and improve the it hit... clings today.

  I have a multiple selection box that does not what to expect.  The values come from a ColdFusion grid, which is based on a database query.

  Here is the code for the select - doesn't work - nothing is selected:

  < cfselect name = "USER_IDS" multiple = "true" = "below" selected = queryposition query "USER_IDS' = 'ActiveUsersPlus' disabled = value" "disabled #" = "G_USER_WORK_UNIT_SK" display = "G_USER_ID" > "

  < / cfselect >

  Now if I change the multiple selection of a single select as below - it takes the first element in the list of the fields (from the grill) and selects it in the drop-down menu.

  < cfselect name = "USER_IDS" multiple = "false" queryposition "below" selected = query "USER_IDS' = 'ActiveUsersPlus' disabled = value" "disabled #" = "G_USER_WORK_UNIT_SK" display = "G_USER_ID" > "

  < / cfselect >

  Or if I assign a variable like this and use the code of multiple selection it seems to work as well.

  testlist = '22,26'

  ...

  "< name cfselect ="USER_IDS" multiple ="true" ="under"queryposition selected =" "#testlist # ' = 'ActiveUsersPlus' disabled = value query" disabled # "="G_USER_WORK_UNIT_SK"display ="G_USER_ID">

  < / cfselect >

  I posted "User_IDs" value in the grid and in the part data entry screen to see the values of: 22,26

  to make sure it wasn't my problem.

  Grids and multiselects need something more?  Any advice on how to fix?

  Problem was the bit of javascript for the area of selection.  There is a function for an only select box but not a box selection - this fixed it:

  If (theForm.elements [i] .Guy == "select-multiple") {}

  selectBox var = theForm.elements [i];

  var sbname = selectBox.name;

  CPValue = String (eval ('record.data.)) ((' + sbname));

  var NotifyArray = cpvalue.split(',');

  for (var j = 0; j)< selectbox.length;="" j++)="">

  selectBox [j] .selected = false;

  }

  for (var j = 0; j)< selectbox.length;="" j++)="">

  sbvalue = selectBox [j] .value;

  for (var k = 0; k)< notifyarray.length;="">

  If (sbvalue is {NotifyArray [k])}

  selectBox [j] .selected = true;

  }

  }

  }

  }