Brand New in Box Palm Zire will not charge!

Similar Questions

• iPod will not charge with new computers

  I just got a new laptop (Windows 7).  I also have a desktop computer (Windows 8).

  My old iPod used to load with my previous laptop (also Windows 7).

  But it will not charge the new laptop with me.  I downloaded the latest version of iTunes on my new laptop.

  He still will not load.

  I tried with my desktop computer (Windows 8) but that does not charge the iPod either.

  I tried with my old laptop (windows 7) and it loads DID.  I can't keep my old laptop.

  An ideas?

  Are you just having a problem with the "load"?  If the iPod appears in iTunes when connected, try the following as a test.  Go to the screen of the iPod settings in iTunes.  Look for the setting (a check box) to allow the use of the disk.  If currently, this option is NOT checked, check it and click apply.  With disk use enabled, does make a difference to the number of cost?

  What type of iPod shuffle you have?  There are four models of shuffle.  This web page presents all the iPod models

  http://www.EveryMac.com/systems/Apple/iPod/index-iPod-specs.html

• I can't bid on firefox or explorer. I place the cursor in the quote box, and it will not record the numbers. Can someone please help?

  I can't bid on firefox or explorer. I place the cursor in the quote box, and it will not only record the numbers. Can anyone help please thanks

  Problem solved. My husband came and noticed that the number lock has been deactivated. I can't thank you enough for your help. Hope my solution helps someone else with the same problem.

• New computer, new Firefox install, but it will not be asked to remember the passwords?

  New computer, Dell XPS 17 laptop computer, Windows 7 64 bit, downloaded the latest Firefox (new v12.0), but he will not be asked to remember the passwords? This is one of the big reasons able to use Firefox, is there something that needs to be defined? Also disgusted that Windows Easy Transfer from your old computer, that would have been copied 'everything' is not copied my Firefox stuff on?

  Here's what I suggest:

  On your old computer, open help > troubleshooting information and then on the button that says either the folder containing (pre 12 Firefox) or view folder (Firefox 12). It's your active profile, and you must copy all the content of this file on a USB flash drive or another your favorite type of media.

  On your new computer, close Firefox and starts in the Profile Manager, as described in the management profiles. Create a new blank profile. After Firefox starts upward in this profile, see help > troubleshooting information > view folder. Leave this window open and restart Firefox.

  Now completely erase this profile folder and dump all of your old profile in folder. Restart Firefox and you should have as close a replica as possible to your old configuration.

  A little luck?

• My new HP Officejet Pro 8600 will not analyze superior at 300 dpi of the location of the single document.

  My new HP Officejet Pro 8600 will not scan more than 300 DPI when scanning individual photos on the glass plate. I do not use the document feeder. I use this printer wireless on an iMac and a PC.

  Hello

  You can pass the value of hp scan: launch of the demand application, select the shortcut to scan (PDF or JPG to the left) and change the resolution you want and save.

  This will send down the printer settings. So the next time you scan, the printer uses these settings.

  Good impression.

• I need to change the drive to a new drive letter, but XP will not let me because he thinks that the letter is in use.

  Quick question: I need to change the drive to a new drive letter, but XP will not let me because he thinks that the letter is in use, when it is not.

  The question for a long time: I've updated two disks in my computer from 1 TB to 2 TB. They were e and K:. The KC: drive is used as a backup of data on E: drive.

  I copied all the data on the old drive E: to the new, but when I put the new drive in place of the old, XP wouldn't let me assign the E: drive letter. It is ironic that several times, I see the warning that if you change a drive letter, some programs may not work - so of course that Microsoft is aware of this problem - however, it is annoying when you NEED to change a drive letter to OPERATE programs, but Windows won't let you. Sometimes, trying to protect users from doing stupid things prevents them from making things work...

  Anyway, after some research, I discovered that if I put the drive E: OLD and "remove" the drive of her letter, then the letter E: becomes available again. It did not work, and my computer is now partially satisfied with his new E: drive. However, the same trick with the new drive K: does NOT work.

  I removed the letter 'k': the old K: drive, but when I install a new one, it won't let me change it. It happens to be stuck at 'l': it's no use to me because backup programs are ready to use the K:\ path.

  There is that no "K:" drive in my computer and I deleted the letter k: the old disk. How do I FORCE XP to designate the new drive K: so that my backup program can work again?

  Thank you.

  Did you try to start your computer in Mode without fail (repeatedly, key to tap the F8 as your computer starts) and then try to re-assignment of drive letters?
  I think that some programs on your machine may be playing with your drive letters.  Boot safe mode will allow Windows to operate with a minimum of processes that are running and you should be able to change drive letters in these conditions.

  HTH,
  JW

• Palm TX will not stop

  Palm TX will not turn off after a soft reset. After the soft reset, the screen is stuck on the "Palm Powered" gray screen and stays there.  Time to do a hard reset? Was chicken so far.

  Did the warm reset several times but no luck. Did the Hard reset and the Unit came through very well. Happy I saved enough recently and had my photos duplicated in the card slot. Thanks for your help!

• Error code 204 trying to download CC on new laptop (2nd computer) it will not download and receive the error code 204. I tried turn off anti-virus and firewall and get the same error code. How do we install CC?

  Error code 204 trying to download CC on new laptop (2nd computer) it will not download and receive the error code 204. I tried turn off anti-virus and firewall and get the same error code. How do we install CC?

  Please ignore. I disabled the anti-malware and the app is trying to install.

  Thank you

• LC - E6 quickly shows the flashing orange light. Will not charge the battery.

  The charger that comes with my new 5 d Mk III LC - E6 battery could not operate right out of the box. Would not load my new battery, nor any of my other Cannon batteries. Amber led flashes quickly.
  The old LC - E6 charger supplied with my EOS 7 d charging these batteries normally.
  I updated the scrapped charger delivered with my 5 d Mk III, and bought a new LC - E6 B & h. This unit has the same question. Sometimes it will load some of my batteries of Cannon, but more often the clear amber, after 20 seconds of just flashes quickly and will not charge the battery. My old charger LC - E6 Bill still all these batteries in normal mode.
  I use brand Canon LP - E6 batteries in these cameras.

  I followed the instructions found in the owner and guide online the site of Canon USA to charge the battery. The batteries are relatively new and show the good working condition on the information panel of the menu camera camera battery. These units (LC - E6) never worked properly.

  Tim,

  AC power removed normal home. All high-tech devices are functioning normally.

  As for replacement by Canon, I don't have the original invoices for this item, so I'm just going to buy another.

  Thanks again for your contribution.

• Satellite A100 - will not charge the battery

  Hello

  I have ned to help. My Satellite A100 will not charge the battery. He works the power adaptor for the led indicates charging status, battery shows 1% of loading tatus information, but none does change - no loading any time. When disconnected everything just stops off like normal desktop.

  I've already put battery in and out, made upgrades to the antivir software, makes Toshiba controls, tests, but what ever he did did not any change. If there is no way for restoration of battery how to check what the problem is I have no second battery or AC I can always buy new batttery but I don't know if the old one is broken and weather new would work properly?

  Best regards
  pawelg

  Hi pawelg,

  I agree with the user above. The battery can be charged only up to 500 times, and after that, it must be replaced. I think it's the case now, I mean that everything works correctly on the AC adapter so I think that the battery must be the reason for this.

  By the way: you can buy a new battery to an authorized service provider. ;)

• Satellite A100 - 166 PSAA9E will not charge the battery

  Hello

  My laptop will not charge the battery.
  Although Windows Xp recognize the battery and says loading, the battery does not charge.
  I tried with a spare battery that I thought that the battery was faulty, with the same results.

  Strange thing is, when I turn off the laptop the power led remains lit and the blue, even without the power supply attached therefore discharge the battery.
  The battery led is still orange but not load!

  What is the problem with the laptop?
  Thank you

  Hello

  Generally, there are three possibilities;
  (1) the adapter is faulty
  (2) the battery is faulty
  (3) the logbooks electronic malfunctions (ESF)

  So now he of needed to check all these steps to find the fault.
  You said you've tried different batteries and AC adapter works too.
  So it is possible that there is something wrong with the electronic power supply

  In this case there is not much to do to contact the ASP in your country. Technicians should check the portable and should run diagnostics tests

  I recommend contacting the guys and ask for more details and manipulation still good luck and happy new year.

• My pencil to the iPad will not charge.  What should I do?

  My pencil iPad suddenly stopped charging.  The connector of the lightning and the wall adapter successfully charge my iPad and my iPhone 6 but will not charge my pencil.  The green light on the pencil map is no longer lights up.  The pencil is about 7-8 months.

  Hello

  Check the ports on the adapter load load pencil Apple for debris.

  Also try to load your Apple pencil by plugging in the connector of the lightning on your iPad Pro. If the battery is exhausted, a second charge of 15 should provide 30 minutes of use.

  • Use the pencil to Apple with iPad Pro - Apple Support

  If the problem persists, contact Apple support (mail service may be available) or make a Genius Bar reservation in order to your Apple pencil and accessories checked power warranty:

  • Contact - Support official Apple
  • https://Twitter.com/applesupport
  • http://www.Apple.com/retail/Geniusbar/

• Satellite battery click on Mini L9W - B keyboard will not charge

  My keyboard battery will not charge, I left it loads for more than 24 hours after the battery 1 reached 100%.

  I checked the version of the bios that is 1.70. I read the other posts on this particular issue but unfortunately nothing works for me.

  It shows the symbol of charge on battery 2, but it did not go above 0%. If I turn on the battery runs immediately battery 1.

  Please advise me on this point because otherwise I will have to return my satellite click mini. Thanks in advance

  You completely turned the device off?

  Do... Press and hold the power button / stop until the device turns off.
  In addition, you can stop the unit pressing and holding the key SHIFT and then choose SHUT OFF

  Then check the connection between the keyboard and Tablet docker... possibly disconnect and connect again.
  Once the unit turns on again and check the battery State of charge connection adapter to the device.

• My Apple Watch will not charge on the charger.  I cleaned the back of the watch and the charger.  Any ideas?

  My Apple Watch will not charge on the charger.  I tried to clean the back of the watch and the charger more used several points of sale, but in vain.  Any ideas?

  Hello

  When you reload your watch, check that:

  • All the plastic film was removed from both ends and both sides of the cable support (consult closely on the head of the charger).

  

  • On the back of your watch and the head of the charge cable are clean and dry (clean with an abrasive, lint cloth).
  • The head of the load is properly aligned with the back of the watch, with the concave side / curve touch fully:
    • Some docks of watch, brackets, cases or protectors might hinder it.
  • You use a real Apple magnetic Charging Cable or a certified Apple module magnetic charge.
  • If you reload your watch by plugging into a power outlet:
    • Check that the magnetic charge cable Apple USB connector is fully engaged in the USB power adapter.
    • Try to use different maps of the following:
      • The real Apple USB Power Adapter that came with the watch, or;
      • A true 5W Apple (iPhone) or 12W (iPad) USB power adapter, or;
      • A third-party certified 5W (MFi) Apple USB power adapter.
    • Try to charge via a USB port (see following).
  • If loading via a USB port on a computer, make sure that you use a USB 2.0 or 3.0 port, the computer remains turned on and awake, and the cable is plugged directly into the computer (not on, for example, an external keyboard).
  • If your battery is very low, you may need to wait a few minutes for the green lightning appear (confirming that the charge has started).

  Once the load has started, you can tap on the screen at any time to check the progress (leave a few minutes at the beginning, where the watch is in charge of a very low battery level). A green lightning bolt symbol indicates that your watch is being loaded. It is normal the screen back to sleep while continuous load.

  More information:

  Check your battery and load your Apple Watch - Apple Support

• My iPhone will not charge with another cable or adapter. iPhone 5. I mean this as bluntly as this can be explained. NO OTHER POWER CORD OR ADAPTER.

  my iPhone 5 will not charge with any other combination than the exact cord and adapter, I received with the phone. I tried all other options.

  Then?

  I do not understand, not the cable no longer works? Why you want to change the current mix?