Brand new Lenovo Ideacentre Y700 not connect to a monitor

Similar Questions

• Brand new Photosmart 7510 does not connect to Web Services

  Nice day! I am trying to solve a problem for a customer and I hope that someone can help you. I found a couple of other discussions with the people affected by this problem, but the solution did not help. My client has a Photosmart 7510 is all new and it made me get setup for him. The printer is configured, connected to its wireless network, the software is installed on his PC 3 and I can print of each of them. However, we are not able to activate the Services Web is a key reason that he bought the device.

  When we try to turn on Web Services, the printer successfully checks for an update (none are available) but then times out during the server communicating with Web Services... scene. I get the same result if I try to activate Web Services via the printer, thanks to its web Interface or via the installer driver on a PC. Depending on the Network Configuration Page, the printer is properly take an IP address (including DNS) from the router. I tried to set an IP through the web INTERFACE as well by changing the DNS servers 8.8.8.8 and 8.8.4.4 with no improvement. I tried power cycling router of my client and I also tried setting the parameters of encryption on the printer manually instead of using the automatic mode. All computers, my laptop and iPad can use Internet very well, but Web Services will not be activated on this printer.

  Is there any other suggestions that I can try? Is it possible that Web Services are just down right now? This particular unit is defective? My client bought this partially to access ePrint impression from his iPad, so it is essential we get active Web Services. If anyone can help, I would be very happy. Thank you!

  Hello PXAbstraction,

  The servers are being updates not scheduled at this time.  The best thing to do is to wait 1 to 2 hours at least and to 24 hours, then try again.  If this is not enough, let me know and I'll see what I can do.

• Brand new NSZ - GS7 will not connect to Netflix

  There are many solutions, but none of them work.

  I get the following message:

  Cannot connect to Netflix.  Please try again or visit: www.netflix.com/tvhelp

  Says that my version 3.1.4

  Now, there is a key combination, which you can use to access the screen turn off.  It gives NEW cryptic information:

  First of all, I'm under version 06.

  Secondly it is said NBP / 1 / Unable to connect to the functioning local backend

  He then gives a web VERY long string

  https://uiboot.Netflix.com/apps/htmlvui/upgrade_policy?v=2.0&e=SONYNSZGS7-2934-a1b4-FA51-1708-6&Devi...

  When I click on this link, I get a 500 error on my pc.

  It's really annoying me

  Daren

  tried this... it has no effect

• My brand new ipod touch will not sync with itunes. It says I have to update the software, but it is already updated on itunes and the ipod.  Help!

  My brand new ipod touch will not even appear on itunes. It says I have to update the software, but it is already updated on itunes and the ipod.  Help!

  What version of iTunes you have?

• Satellite L850-1v0 - alert "Cable not connected" when external monitor OFF

  Hi all

  I have a portable Satellite L850-1v0.
  My monitor is an A.c.e.r X233H
  Windows 8

  I have the setting 'Disable the display' 5 minutes.

  However, when the laptop off the screen I get a small box that bounces around the screen stating "Cable not connected". The monitor is connected via the VGA port.

  If I connect the monitor to my other machine it turns off fine and do not show this message.

  How can I get the laptop to turn off the display correctly?

  Thanks in advance
  Richard

  > when the laptop off the screen I have a small box which bounces around the screen stating "Cable not connected". The monitor is connected via the VGA port.

  The message appears because the signal to the external display was interrupted because of the setting: turn the display off.

  > If connect the monitor to my other machine it turns off fine and does not show this message.
  I think that the other computer/laptop supports another graphics card and so this message does not appear.

  Satellite L850-1v0 support and use of the 4000 Intel HD Graphics intern, who is part of the processor Intel® Core i3 - 3120M and this graphics card shows these alerts

• New Mac Pro does not connect via WiFi to my ATT router.

  I have a brand new Mac Pro garbage but I'm unable to get it to connect to my ATT wireless router. My phone, the laptop and the TV do it but not my main computer. Oddly enough, I AM able to connect via WiFi for the Mac Pro to my laptop. Any suggestions?

  Please post your question in the Mac Pro support forum... Mac Pro

  If you have a question about one of the Apple routers... the AirPort Express, AirPort Extreme or Time Capsule airport... the products pictured below that we support in this forum... we can probably help you.

  

• New Lenovo A6000 does not

  I just got a new Lenovo A6000. I put a 3 G SIM to work in the slot (slot1) USIM card. However, the phone does not detect that and I move SIM not on turn on/off the phone.

  Under settings-> SIM card management, it says please enter the SIM card number. I tried to enter the SIM number printed on the SIM card but no luck. What number is supposed to be entered here?

  I also tried the same SIM in slot 2 (SIM / 2G). No luck.

  In addition, even though I configured and connected to the Wi - Fi network, I can't access any Web site through the browser and also no google applications connect. Is there a problem with the unit?

  I'm glad that the problem has been resolved.

  1. the phone detects no = Sim not detected. Guess its resolved now since its been the motive for data that was not enabled by default.

  2 WLAN is able to work with a different WLAN access point. I suggest that you set on a different channel on the affected WLAN access point.

• My HP shows it is connected to the new router, but does not connect to the internet. How should I do?

  I have a HP G60 Notebook PC with Windows Vista Home Premium, it is about 4 years old. I recently got a new Cisco Linksys E1500 wireless router, which is connected to my home computer. My laptop shows that it is connected to the home network, but it does not connect to the internet. Other laptops in the House are able to connect to the network and to the internet. Mine seems to be the only one not working do not. Why it is not working? What should I do about it?

  I ran the network diagnostics. It is said "a problem with you network router or modem broadband could prevent an internet connection." I have disconnected these two and tried again. It did not work! I have also connected my laptop directly on the modem and it does not always connect to the internet. I tried to reset the network card. My IP settings are set to automatic.

  My internet connection was not a problem before last week (when I got a new router). What is the problem with my computer? Help, please!

  Hello:

  If you have an Atheros wireless adapter in your PC and you have not updated the driver, I recommend that you install it.

  http://h20000.www2.HP.com/bizsupport/TechSupport/SoftwareDescription.jsp?lang=en&cc=us&prodTypeId=321957&prodSeriesId=3688868&swItem=ob-99392-1&mode=3

  Wireless adapters Atheros with former pilots, dislikes the new Linksys routers.

  If you have an Atheros wireless card, and your wireless driver is more than 2 years, I am very confident that this will solve your connection problem.

  Paul

• Lenovo G505s does not connect to WiFi. Help required

  • I got a Lenovo G505s laptop for my Christmas and the WiFi worked perfectly at first at home, then I went to my aunt for Christmas together and my phone worked perfectly with its WiFi too. My brother advised me to remove a bunch of the start up programs because they are just useless I did remove those he suggested but when I got home I could not connect to my WiFi and that you could not since on my Lenovo G505s. is there a program I uninstalled what is needed to connect to WiFi?
  • I also supported on each of the buttons above the numbers (the mute button, its up/down etc.) just to see what they were doing (airplane mode)
  • To connect to the net, I use the Ethernet cable that I have in my room; is there something I need to deselect to return to the Wi - Fi connection?

  Help please

  Hi Xavier

  You see any unknown device or network with an exclamation point controller in Device Manager?

  If that's the case download a driver Support.lenovo.com.

  If you have any unusual driver in Device Manager, I suggest you go to the BIOS settings

  Keep tapping F2 once you turn on the computer

  Once inside the BIOS go to the Configuration tab and see if you have Wireless - set as active.

  Press F10 to save and exit.

  again check your device manager and see if she returned, or if you have a different unit now under device Manager.

  Hope this helps

  See you soon!

• Brand new Lenovo G780 BSOD

  Dear Lenovo support,

  Yesterday, I bought my first laptop Lenovo, Lenovo G780 brand new. I installed Windows 7 Ultimate 64 bit. Immediately after installation, guess what, I am Blue Screen of Death and one more like 15 minutes ago. I have only 2 GB of RAM, and I noticed that the system often maximizes memory and have zero available RAM. What is the reason for BSOD? Can I upgrade RAM to 4 or 8 GB? What RAM I wait, DDR3? Please give me some advice or recommendations on what do I do? Thank you. I just, I can't accept that this is happening to the new machine.

  Hello, NINE.

  Well, I tried to disable the UEFI boot and then re - enabled again because no specific change occurred. No BSOD so far. I assumed it was a RAM memory because I remember BSOD message was "memory cache" or "cache manager. I will modernize just the RAM to 4 GB. Suppose I have two ram slots.

• New wireless adapter does not connect to my router

  at home, I have a wireless router WRT120N set up for wireless internet connections, I also use the wireless adapter that comes with it. I recently bought a new adapter wireless like this: http://global.level1.com/product_d.php?id=891 and it connect to the router? Help, please

  I think that the wireless connection on your router may not work properly.

  Create a new wireless network.

  Connect the computer to the router with the Ethernet cable. Open the router setup page and go to the Wireless tab, change the name of the SSID wireless network to create a new wireless network. Change the channel to 11. Save the settings.

  Go to the tab of sup of wireless security and check the security settings. Make sure you have the key/password network correct.

  Go to the sub-tab to Wireless MAC filter and make sure that it is disabled.

  Go into the settings wireless Advanced tab change the interval of tag to 75, RTS and Fragmentation threshold to 2304. Save the settings.

  Now ty to connect to the new wireless network.

  If this does not work then try upgrading/re-Flash the firmware on your router.

  Connect the computer to the router with the Ethernet cable.

  Download the latest firmware from the site Web of Linksys and save it to your computer. Open the router configuration page and update the firmware on your router. After upgrading the firmware of your router, reset the router and reconfigure.

  Press and hold the reset button on the router for 30 seconds. Release the reset button and wait 30 seconds. Power cycle the router and reconfigure.

• new router and can not connect wireless

  Installed a new router that has changed my a WEP to a WPA2 security. I connected to the printer (7410) via ethernet cable and changed the security settings, but the printer will not connect to my router. I'm printing directly connected ethernet cable on the router. When I try to use the interface of the printer to cinnect to the router the only option that appears is WEP.

  Any ideas?

  Thanks it worked perfectly for me!  Sorry, your options appear on the screen for you, but they did it for me.

  Just make sure you change your new router wireless to the first WAP and it should work fine.  No need to reinstall any software or drivers as some previous posts said.

  Go to: network, Wireless Setup Assistant, (I had to scroll down to the second page to find where to enter my new network name) and enter the new network name configured on the router.  I changed my network name of the WAP2 name that I had originally put in place, so it was easier to distinguish that one has on the WAP.  Enter your WAP password and you should be good to go.

  I use a wireless router Netgear on a Windows XP operating system.

• All new iPod shuffle does not connect to the Macbook.

  I just bought an iPod shuffle 4th generation. The end of the USB cable provided that plugs into the iPod seems loose, and it does not connect to my Mac. The iPod is defective or have I missed something?

  If it "seems loose," make sure you have inserted the USB docking plug cable in shuffle headphone plug, as shown in this document

  iPod shuffle (4th generation): not seen in iTunes - Apple Support

• Wireless is slow on Windows 7 on laptop brand new (Lenovo T510)

  I have a new laptop (Lenovo T510) with Windows 7 Professional.

  The wireless is slow at home and at work. (I use www.speakeasy.net/speedtest for my speed tests.) At home, the wireless speed is about 1 Mbps. My older laptop (Dell Latitude D630) XP gets 14 Mbps or higher on the same network. If I connect directly to my router, I get speeds over 20 Mbps on my new computer laptop.

  I have (even worse) similar results using the connection Wireless at work. I get speeds of 0.4 MB/s wireless, while my laptop Dell (XP) gets 14 Mbps. (Fortunately, I have a wired connection I use at work). At home, however, it is not really practical to use a wire.

  I read through the forums as much as I can find, and I've tried several things... which none have helped. Here is what I tried:

  -Updated all drivers network card.

  -Management settings power change to "maximize performance.

  -Uninstalled software built-in wireless to Lenovo (logins).

  -Played clean boots with all disabled non-Microsoft services.

  -Disabled my software installed antivirus (Kaspersky 6.0)

  The only thing that provided a benefit is disable anti-virus... software but this is only useful at work. At work, if I turn off the antivirus and restart it, I can achieve speeds up to 5 Mbps (remember that my Dell XP laptop always gets 14 Mbps or greater). But, at home, disable the antivirus software does not make a difference.

  Any ideas?

  I finally got it to work. I now get wireless speeds in the range of 7 to 12 Mbps. That's what I did yesterday:

  -Installed all Lenovo ThinkVantage tools - including updates to * all * optional updates.
  -Manually update my network card drivers wireless (Intel Centrino Ultimate - N 6300 AGN) in version 13.1.1.1. (It's at 13.0.0.7 and when I click on update driver, he couldn't find any new tool.) But, I found 13.1.1.1 on an Intel website and installed it.)
  -Uninstalled ThinkVantage Access Connections wireless management software.
  -Disabled 802.11n Mode (it's been activated) under the Advanced tab of my Intel Centrino Ultimate - N 6300 AGN properties. (This amount has contributed to the work. I received fast performance with this active or disabled on my home wireless network after other changes.)

• Lenovo y480 does not connect to wifi

  I've had my y480 (renovated) Lenovo for about a week now and it connected to my wifi without problem the first days. Then last night it suddenly lost internet connection and has not received this morning either. I rebooted several times. All of my other "gadgets" / laptops get the connection. This one seems to find my router for a second, give me internet for a second, then don't say 'no internet connection' and then finally say that it does not find my wifi connection.

  Don't know what to try.

  Thank you

  Casey

  After that I went out for a few hours, I came back and my power went out in my apartment. Now, everything seems to work again.

  I'm confused because I tried to reset the router once.

  It is unusual to have one computer accepts not WiFi sometimes? I have not experienced this with my other computers. I want to just make sure that the problem is not something to be feared that the system is refurbished.

  Thank you very much!