error on drive c (vista)

Similar Questions

• Photosmart C4400 Fatal Error download drive, Windows Vista

  Operating system: Windows Vista 32-bit

  Printer: Photosmart C4400 (I have had no other printer software on my computer)

  Problem: I can not download the driver (from the included CD) on my computer.

  Step 3/4, 94%, I get a fatal error Message:

  MSI. Scan

  Microsoft.vego.STL, processorArchitecture = "x 86", publicKeyToken = "1fc8b3b9alel8e3b" version = "8.0sc727.91", type = "win32".

  Error situation coade 20218093

  What I tried: disable the firewall, by downloading the reader from HP site, try the message error MSI listed on the HP site. All to nothing does not.

  What should I do to correctly download the driver? BTW: The printer works when I use a memory card.

  Thanks for all the solutions!

  try to download the latest version of msxml for windows, and then try to reinstall

• Error update driver: driver being installed is not validated

  Hello world.

  I'm nii of Ghana.

  I'm trying to update my graphics to run a 3D program requiring it, but I get the error message "driver is not validated for this computer. You can get the correct driver from the manufacturer of the computer.

  The accelerator in use the Mobile Intel (R) 4 Series Express Chipset Family
  The current version is 7.15.10.1502
  The version is the 1508

  I downloaded the 32-bit version for windows vista, but can't seem to update to the new version.
  I'm getting the above mentioned error report.
  I tried the update online utility that tells me the same. I hope that here; s a way around this problem.

  Thanks and hope to hear is advanced.

  Hello

  The error means that you are trying to install a driver that is not compatible with the graphics card.

  What cell phone do you have and what graphics chip this laptop does take?

• At the start, get error loading driver udesiab.dll

  on startup, I get an error loading driver udesiab.dll, no matter who with an idea what is this driver or how can I remove it?

  Hello

  read the slot results in google for "udesiab.dll."

  http://www.google.com/search?hl=en&source=HP&q=udesiab.dll&aq=f&aqi=&AQL=&OQ=

  There is no search results for her that usually indicates that it is malware or a stay starting entry of for her

  to be on the good side for malware scan;

  Download update and scan with the free version of malwarebytes anti-malware

  http://www.Malwarebytes.org/MBAM.php

  You can also download and run rkill to stop the process of problem before you download and scan with malwarebytes

  http://www.bleepingcomputer.com/download/anti-virus/rkill

  If it does not remove the problem and or work correctly in normal mode do work above in safe mode with networking

  Windows Vista

  Using the F8 method:

  1. Restart your computer.
  2. When the computer starts, you will see your computer hardware are listed. When you see this information begins to tap theF8 key repeatedly until you are presented with theBoot Options Advanced Windows Vista.
  3. Select the Safe Mode with networking with the arrow keys.
  4. Then press enter on your keyboard to start mode without failure of Vista.
  5. To start Windows, you'll be a typical logon screen. Connect to your computer and Vista goes into safe mode.
  6. Do whatever tasks you need and when you are done, reboot to return to normal mode.

  If the error persists after scanning use this program to out startup

  This utility, which has a knowledge of auto-starting locations of any startup monitor, shows you what programs configured to run at system startup or login and that the entries in the order of processing windows. These programs include those in your startup folder, Run, RunOnce, and other registry keys. You can configure Autoruns to show other locations, including Explorer shell, toolbar extensions, helper objects to the browser, Winlogon notifications, auto and many start-up services even more. Autoruns goes way beyond the MSConfig utility bundled with Windows Me and XP.

  http://TechNet.Microsoft.com/en-us/sysinternals/bb963902

• DVD player does not appear error - the driver may be corrupted or missing. Code 39, fix the driver installation fails, virtual drives don't work - same results if the material under tension

  Original title: drive does not appear, difficulty he pilot installation fails, virtual drives don't work - same results if the material under tension

  A few weeks ago, as my two DVD players (the two Samsung Lightscribe SH-S223Q of) disappeared after a repair installed, I did for the other problems (not sure if it was directly after installation because I don't notice it right away, but it was no doubt). In Device Manager, it gives the message:

  "Windows cannot load the driver for this hardware device. The driver may be corrupted or missing. (Code 39) »

  I tried the Microsoft Fix It tool (Mats_Run.dvd.exe) that detects the problem and says "Install device driver" in a popup, but then he says "software device driver failed to installed. At the end it says under the issue, the "CD/DVD drive is not detected" and the status of Fix 'not set '. Note that, when I boot from another hard drive (with Vista 64 on it installed from the same DVD, just a new installation) disks appear very well. Also I can boot from the drive as well.

  I can't do a repair installation, since it must initiate Windows, and I can't load the disc. I tried to update my BIOS but that has no effect.

  Recently I actually moved this hard drive to another one, with another brand of hard drive and all the rest. Just like before, if I boot from another hard drive (this one with Windows 7), the drive unit-a Optiarc AD-7230 s - looks and works, and I can also boot from the drive at startup. But since the drive hard as I want to use, the drive does not appear. Fix it, etc. Device Manager gives the same messages as before.

  I tried virtual drives - Daemon Tools Lite and Virtual Clonedrive. When I try to add virtual devices to help, nothing happens. The new drive will be displayed in the Manager of devices, but with the same error Code 39 as the real drive.

  What are my options at this point? How can I get the drive to appear or to fix my copy of Windows?

  I could solve this problem. I started in Ubuntu and deleted the existing cdrom.sys, cdrom.inf etc. files (as in Windows, they were protected and I couldn't delete them), then I copied the files from another installation of Vista I had on another hard drive. After having done that, I updated the drivers in device, disabled/enabled readers and readers management that presented themselves.

• When turning on my computer always error message "drive: c / on the Neurofibrillaire degeneration and is currupted.__How can I solve this problem?

  When turning on my computer always error message "drive: c / on the Neurofibrillaire degeneration and is currupted.
  suggest how to check the disc I have to press a key before 6 second, try that, but nothing is coming.

  How can I solve this problem?

  http://www.Vistax64.com/tutorials/130824-CHKDSK-will-not-run-startup-Vista.html

  See if help above.

  See you soon.

  Mick Murphy - Microsoft partner

• I am a message error display driver stopped responding and has recovered what should I do to fix this?

  I have OS windows 7 and my computer model compaq laptop presario CQ60... can you tell me the link from where I get this update drivers?

  I have OS windows 7 and my computer model compaq laptop presario CQ60... can you tell me the link from where I get this update drivers?

  Hello

  What you see is called the TDR (time display and recovery) process in action.

  This component is designed to prevent damage to the computer when the video device is nearby to crash the system. In earlier versions of windows when the display device ran out of resources throughout the system would stop responding, requiring a hard reboot to recover.

  In Windows 7, if the display device is not responding, the system will try to stop and restart the device to recover.

  More information on this feature can be found here (Advanced): http://msdn.microsoft.com/en-us/windows/hardware/gg487368.aspx (written for Vista, but also applies to Windows 7)

  The most common reason for this problem is that the display device is overloaded or used beyond its capabilities.

  When this situation occurs, windows tries to recover by restarting the display device. If she can't get it back, you will see the blue screen.

  This happens more often when you play graphics intensive, but can occur with any process that uses a large amount of graphic resources, for example, when editing or creating videos.

  What you can do to avoid these problems:

  Make sure that you use the latest graphics device driver.

  Manage your work time with programs that are graphic-intensive, quit other programs that might also use a large amount of resources.

  Also read the following article:

  Display driver stopped responding and has recovered the error message in Windows Vista or Windows 7:

  http://support.Microsoft.com/kb/2665946/

  Concerning

• Satellite X 200-15 k - how can I activate the advanced buffer HARD drive under vista?

  How can I turn on buffer advanced performance HARD drive under vista? This option is not available for this drive?

  * Check this box: *.

  1. right click on the computer in the Start Menu, then select Options.
  2. click on advanced on the left system settings.
  3 select the Hardware tab in the System Properties window.
  4. click on the Device Manager button.
  5 expand disk drives.
  6 right-click on a hard drive under disk drives, and then select Properties.
  7. Select the policies tab in the Properties window for the device.
  8. check Enable advanced performance.
  9. click OK to save the changes and reboot your computer.

  If this is not possible then the buffer of advanced performance is not possible with this HARD drive.

  Hey Buddy

• Tecra S10-106 - 3 G driver for Vista Ultimate 64-bit

  Hello

  I own a Toshiba Tecra S10-106. Due to the fact that Vista Ultimate 64 bit is much faster than Vista Business 32-bit, I would use Vista ultimate 64-bit operating system, but I can't find the 3G for Vista 64-bit driver. All the drivers can be downloaded from the USA in English and can be used in German, only the 3G driver is missing. Can someone send me a download link or tell me where I can find a driver for Vista-bit 66?

  Thanks in advance.

  Hello

  You can download the drivers here:

  http://Support1.toshiba-tro.de/Tedd-files2/0/3gdrv-20090303131409.zip

  64-bit drivers are located under the Portégé R600 laptop.

  Concerning

  Phil

• Satellite A300D-17Z - cannot install the display driver for Vista

  Hello

  There is a big problem with my A300D-17Z.

  The laptop has ATI HD3470 Hybrid Crossfire display system. I'm trying to install the driver in Vista Ultimate, but it does not work. The ATI Catalyst control cannot install and ATI driver file is empty. Shows Device Manager still there are two graphics card with «!» I tried so many ways. Install framework 3.5, pilot of the AMD 7 series, last version of the ATI driver, driver of the same other computer brand who says that worked.

  Please help me, I had been tormented for nearly 48 hours. PLEASE, I BEG YOU!

  Hello!

  Have you tried to install the driver to display on the Toshiba site? You can find it here:
  http://EU.computers.Toshiba-Europe.com-online decision-making supported Downloads & => Download drivers

  Before you try to install a new display driver, you must remove any old version in Add/Remove programs. Then, restart the laptop and use CCleaner to clean the system. Restart again and then install the new version.

  You have the same problem with the factory settings? In the worst case, you must reinstall Windows using Toshiba recovery disc.

  Good bye

• I have an error: a drive with a mount point is required - what it means?

  I have an error: a drive with a mount point is required - what it means?

  Please explain EXACTLY what you were doing before this message appears.

• When Toshiba released the driver audio Vista for Qosmio G30 (PQG30)?

  It's really annoying to have no sound. No one knows when the driver must be interrupted?

  Hello

  You should check this page from driver Toshiba Vista if you want to download the drivers of Vusta for your laptop:
  http://PC-support.Toshiba-Europe.com/Vista/

• Re: Satellite P300D-12F PSPD4E: Driver for Vista 64-bit required

  Hey,.

  Hope you can help me...
  Satellite P300D-12F (PSPD4E - 018001GR) is a portable computer that has a 64-bit processor...
  So why I can't find the drivers on the page of the driver for Vista 64 bit?

  Hello

  > Why I can't find drivers on the page of the driver for Vista 64 bit?
  Maybe the 64 bit Vista drivers are not available at this moment, because this series is new to the market and the driver 64 bit Vista will be released in the near future.

  I think that it s just a matter of time when the pilots will be published on the European driver Toshiba page.

  Not out of patience ;)

  Good bye

• HP Deskjet 1512: Error applying driver settings, then a problem prevented the scanned Document

  I can't find any question about scanning on this product, I want to post a picture of my screen, but can't. This occurs when you try to scan anything. The first screen comes up with "Error applying settings to Driver" then then once the product has tried to sweep is the error message "a problem prevented the Document are analyzed. I had this product since almost a year and were only able to analyse once. I tried in vain to follow all the troubleshooting steps and nothing works. I'm starting to hate this printer. I uninstalled and reinstalled, restarted my computer and more after each uninstall and reinstall. I unplugged USB and power cords. This software/scanner driver sucks!

  I do not usually bother with these sites, but since I seem to be the only person who knows the solution for application error settings driver with scanners I should share it. I went through three Microsoft technicians and they were at a loss. They usually end by saying that I have installed a bad iso image and need to download a new one and reinstall. But anywho the fix is... run your registry editor and go to HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\StillImage and remove the key from the photo don't worry it will be recreated with the key parameters appropriate because the pilot he rewrites and there you go no scanner error more I have to add that I am on win 10 x 64 with a Canon mp280 printer , but this should apply to windows 7 and upwards.

• Qosmio G10-105: standard VGA need driver for Vista

  Hello

  I want software for standard VGA graphics adapt nVIDIA GeForce Go 6600 for Vista

  Please help me

  I put t know what you mean by software for standard VGA graphic card, but I guess you a looking for a driver for Vista graphics card.

  Unfortunately, Vista is not supported on the Qosmio G10 and F10 series and therefore a graphics driver doesn t exist on the driver page.