Satellite L850-1v0 - alert "Cable not connected" when external monitor OFF

Similar Questions

• Satellite L850 - 1 5 does not connect to most of the Web sites

  I have access to the Internet and am connected to my hub, but most sites do not work and have a message 'server not found '. Contacted the network who say that it is a problem with my laptop not the network. Help, please?

  Me too. See here: https://forum.toshiba.eu/member.php?...4824-Taffy_078

  If nobody answers soon, I'll put on Facebook. You too?

• H233H"cable not connected" with the computer is turned off

  My H233H monitor displays an annoying blue "cable not connected" when my computer is off or in stand-by mode.  Monitor works find out otherwise and all the buttons on the front panel work.  But impossible to find a setting that will turn the monitor off when the computer stops sending a signal.

  If I unplug the cable from the monitor to the computer's HDMI, should not the monitor eventually fade or go to sleeo?  Or will she continue to display this message "cable not connected" blue indefinitely?

  Thank you

  Well, I realized that it is a problem of Acer monitor with HDMI input.

  There is no problem if I connect my H233H monitor with VGA or DVI cable.

  Just thought I'd come back and answer my own question if someone ever comes back here with a similar problem.

  Good luck...

• Database alert is not triggered when the Oracle database monitor by mistake.

  Hello

  Database alert is not triggered when the monitor of the Oracle database by mistake. If we test the alert manually alert works correctly. Could someone let me know the solution for this.

  This isn't a question of PC or operating system. You should post your questions in the forums of Oracle database.

• Connect an external monitor to an Equium L10-300

  Hello

  I wonder if someone can tell me how to connect a Viewsonic external monitor to a laptop Equium L10-300?

  I unplugged the screen and when I got to reconnect again I got a message "No signal input" on the monitor. I sent the manufacturers of screens that said I had to turn on the laptop, wait for Windows to load, and then press and hold the function key, while pressing F10. There is nothing! Before that, they said that I needed to press the feature key followed by the key with the monitor symbol F on it, it doesn't work anymore!

  Can someone help me out here?

  Thank you

  Jodie

  Hello

  The laptop supports a port external monitor (port/VGA RGB port).
  You need a VGA cable to connect the external monitor to this port of s for laptop.

  After that, use the FN + F5 key combination to switch to the external video output
  All that s

  If the buttons FN n t work then you must install the utility of the European driver Toshiba page shortcut

  PS: I assume you are using Win XP
  You can also do this:
  Right click on the desktop
  Choose Properties
  Has chosen the last settings tab
  Choose Monitor 2 and check extend my Windows desktop on this monitor

  Welcome them

• Satellite A20-S103: no internet - no media not connected when typing ipconfig

  Hello

  A few days ago I installed windows xp on my Toshiba (SA20-S103).
  I installed all the drivers, but the internet does not work.

  It telling me 'no media not connected' when you type Ipconfig.

  Anyone know if the problem has to do with the drivers for the ethernet (Realtek RTL8139/810 x Family Fast Ethernet NIC) card or chipset drivers. I tried so many drivers, but can not solve the problem.

  Greetz

  Hello

  Have you checked if the network adapter driver has been correctly installed and if there is no yellow exclamation point in Device Manager?

  My own knowledge of the message no media connected is displayed if the LAN cable is not properly connected or the cable is broken.

  Should check this too!

• Realtek 81xx NIC "Cable not connected" with WRT54G2 on Windows Vista

  Hello, I have this weird problem with Realtek 3 different integrated NICs, connect to a WRT54G2 configured as an Access Point.

  I have installed and configured the WRT54G2 without any problems using my computer laptop buildin NIC and wireless adapter, it worked like a charm. However, try to connect two different PC with integrated NIC Realtek 8168 me Gets the problem of "cable not connected". When I click on this cable in to my laptops NIC, it works.

  I've tried everything. In advanced settings, I changed the speed to 10 Mbps, 1000 Mbit and 100Mbit and back to auto. nothing. When I plug the cable in 10Mbit, the lights on the NIC on briefly then darken again. When they do not appear there is a message "unknown network".

  It is not energy saves the settings, I turned them all off. Also any firewall setting is killed on the clients.

  I even bought a cheep * beep * PCI NIC, which has been using a Realtek chip set 81xx; don't turn back, "cable not connected" everywhere.

  I've never seen anything like this. With any other router is most of the configuration work, now, I spent the evening in the hope of seeing the yellow and orange lights flash to appear. This is the way to complicated for no reason.

  Anyone can say anything about it? I think to get to a simple Belkin do the work.

  Have you tried another ethernet cable... Try it.

  Connect to the Linksys configuration Page and reduce the size MTU to 1300 and click on save settings.

  You can also try reducing the map of the computer (NIC) speed to 10 Mbps half duplex / 10 base mode half T/10.

  If the foregoing, all action does not work, try to reset the router for a minute... Check it out now.

• I have norton antivirus online via my ISP and I had to disable, because it comes with an error that says "cable not connected or missing network adapter" I use dial-up.

  cable not connected network adapter

  I have norton antivirus online via my ISP and I had to disable, because it comes with an error that says "cable not connected or missing network adapter" I use dial-up and do not use any type of router and I'm not on a network. I also tried to disable my network card & it still says the same error. I have an internal network card that came w / the computer (NOT a PCI one) and I wonder if there is a cord or a plug inside my computer that must be plugged. I made some changes on the internal hardware and might have missed an and I didn't have to open my Tower if it wasn't. It's a big hassle! Help, please!

  Hello

  1. Once you get the error message?

  2. do you get the error when you try to disable Norton anti-virus?

  3. are you able to access the Internet explore?

  Temporarily disable the antivirus on the computer running software and check if you are able to install the software.

  Disable the anti-virus software

  http://Windows.Microsoft.com/en-us/Windows-Vista/disable-antivirus-software

  WARNING: Antivirus software can help protect your computer against viruses and other security threats. In most cases, you should not disable your antivirus software. If you need to disable temporarily to install other software, you must reactivate as soon as you are finished. If you are connected to the Internet or a network, while your antivirus software is disabled, your computer is vulnerable to attacks.

• SK2061: The wireless keyboard will not connect when the PC is turned on.

  My problem is, when I start the PC, (HPK-15 500, 319NA), wireless (SK2061) keyboard, does not connect. I have to shut down the PC so he can connect (no restart, you must stop it).  Have had the PC for 5 months and it has been published. Not changed the battery makes no difference.

  The internet statement States I shoud push the blue button until the USB receiver flashes. This PC does not have an external USB receiver, I guess it's built in! The mouse works OK.

  Hello @JimCar82,

  I read your post on how the wireless keyboard will not connect when the computer is turned on, and I'd be happy to help you in this case!

  Re-connect your keyboard to your desktop computer wireless, I advise you to follow the steps described in this document on the keyboard and wireless mouse troubleshooting. The USB receiver should be found at the back of the tower.

  Please re-post with the results of your troubleshooting, and I look forward to your response!

  Concerning

• "Cable not connected to the network adapter.

  WRT400N did not come after start stop and cold pc.  Windows Vista repair & diagnostic returns "cable not connected to the network adapter.  I tried to plug and re - plug cable ethernet; router power off (+ 10 sec.); Linksys repair; reset the modem, etc.  The success of the Internet, but no router.  The only solution is a pc "restart" and then the appropriate router port lights up and all is well.  What is the real solution please?

  Hi Helm,

  I finally got the router to work after several reboots and struggles.  in any case, I'm always game to try almost anything if you have any other suggestions...

  Thank you

• Can not connect - when entering a password message "the service user profile service has no logon. Failed to load profile \User' cannot access start menu to apply the options.

  Can not connect - when entering a password message "the service user profile service has no logon. Failed to load profile \User' cannot access start menu to apply the options.

  Hello

  1st thing to try is the system in safe mode restore to before the problem

  http://www.windowsvistauserguide.com/system_restore.htm

  Windows Vista

  Using the F8 method:

  1. Restart your computer.
  2. When the computer starts, you will see your computer hardware are listed. When you see this information begins to tap theF8 key repeatedly until you are presented with theBoot Options Advanced Windows Vista.
  3. Select the Safe Mode option with the arrow keys.
  4. Then press enter on your keyboard to start mode without failure of Vista.
  5. To start Windows, you'll be a typical logon screen. Connect to your computer and Vista goes into safe mode.
  6. Do whatever tasks you need and when you are done, reboot to return to normal mode.

  If that does not solve it read more

  read the tutorial below

  http://www.Vistax64.com/tutorials/130095-user-profile-service-failed-logon-user-profile-cannot-loaded.html

  When you log on a Windows Vista-based or a Windows 7 computer by using a temporary profile, you receive the following error message:

  The user profile Service has not logon. User profile cannot be loaded.

  http://support.Microsoft.com/kb/947215#letmefixit

  Your user profile was not loaded correctly! You have been logged on with a temporary profile.

  http://support.Microsoft.com/kb/947242

  If you tried to log on to Windows and received an error message telling you that your user profile is damaged, you can try to fix it. You will need to create a new profile and then copy the files from the existing to the new profile. You must have at least three user accounts on the computer to perform these operations, including the new account that you created.

  http://Windows.Microsoft.com/en-us/Windows-Vista/fix-a-corrupted-user-profile

• Possible to connect an external monitor for laptop HP Pavilion dv4t-4200 CTO

  I have a HP Pavilion dv4t-4200 CTO Entertainment Notebook PC model # A1M02AV and it has a VGA, one port that resembles a cable port phone/broadband and one that looks like a USB port, but indented on each side down. I can even connect an external monitor? How will I know if I have more than 1 video card? In addition to the usual USB/headphone ports, I have not all ports. He says that my drivers are up to date... but I don't know even what I'm looking for. Do I need to install something or buy some kind of adapter?

  I'm trying to connect an external Dell montitor via the VGA port with a VGA cable. The monitor has power, but my laptop does not detect recognize them / it. However, when I plugged in the first time in, my laptop screen has shrunk in a square (vs the entire screen) so he acknowledged something... but nothing happened on the external monitor.

  I tried to detect through my display settings, but I have accidentally changed some display setting until the reception desk shows only 1 monitor, but not selected my real laptop screen or something or changed to be Monitor 2 (even if there is no monitor 1), so when I plug the cable into my laptop suddenly my desktop disappears and it's just a white background screen - and I cannot access the screen of the computer settings or whatever whatever... when the cable is disconnected this setting seems to be normal, so I can not understand how to fix it.

  Sorry, I don't know what I'm doing here - please help!

  Hello

  All Dell monitors are equipped with CD for the drivers. Your laptop may not know the monitor without its driver, it will not install automatically. Please check:

  Ringht click an empty space on the desktop,

  Click Customize

  Click on display

  Click on change display settings

  You can see the TWO laptop screen and external monitor in there, as shown in the following image:

  

  For the test, I put my Dell monitor is my main screen. If I can't see 2 monitors, you need its driver first and then check the cable.

  Kind regards.

• Windows 7 does not detect my external monitor. Why? How should I do?

  Good, some basic information. The laptop at the origin of the problem is an HP laptop.  In other circumstances, I wouldn't care on this issue. But the screens on both of my computers cell phones don't work (they are Sun and incredibly difficult to see, barely visible) and I use an external monitor so for use.

  In other words, I used.

  I have Windows 7 for one of my laptops, and it is already fully charged. But, I tried to connect my external monitor, it did not work. I tried to use the projection screen, pressing [FN + F4]and pressing on [FN +] other F keys, as well. Of course, I thought it was weird. So I looked for answers on the internet (on my other laptop), nothing works. Most only have problems with the monitor not working not properly; mine is not detected at all. I went to the display settings (have to squint shine with a light and bend my laptop screen in different directions), and it showed only 1 screen, the main screen. I tried to restart, stop, unplug the monitor and in him plugging back and turning the cable around. I know that the problem is not the cable, as I use it right now.

  I also tried updating the drivers, but for one reason, the laptop now refuses to connect to the internet as well. So, now, I have a laptop completely useless with a black screen, and I can't put my files on it because of this black screen. Not that I'd be able to use it for something else, anyway.

  Hello

  Thanks for posting your query in Microsoft Community.

  Have you tried to connect the external monitor to another laptop?

  You can view the following items according to the questions:

  For problems with the monitor not detected
  refer to the suggestions of Geethu B responded requesting 24, 2012

  http://answers.Microsoft.com/en-us/Windows/Forum/Windows_7-hardware/second-monitor-not-being-detected-Windows-7/0f8754dd-64da-4B25-aecf-341a19ebf469

  For problems with not able to connect to Internet

  Refer

  Why can't I connect to the Internet?

  http://Windows.Microsoft.com/en-in/Windows/cant-connect-Internet#1TC=Windows-8

  For the black screen of questions, check in safe mode:

  Safe mode starts Windows with a minimal set of drivers and services.

  http://Windows.Microsoft.com/en-us/Windows/Start-computer-safe-mode#start-computer-safe-mode=Windows-7

  If the computer works fine in safe mode, try the system restore, then check.

  Perform the system restore.

  http://Windows.Microsoft.com/en-in/Windows7/products/features/system-restore

  Note: When you use system restore to restore the computer to a previous state, programs
  and updates that you have installed are removed.

  I hope this helps. Please let us know the results. Feel free to write us again for any help.

• Tecra Z50 - need to connect two external monitors

  I think to buy Tecra Z50, but one of the features that I need is the ability to connect two external monitors.

  Is it possible to have a monitor connected to the HDMI and a VGA (with computer laptop lid closed)?

  * Hi-speed III Port Replicator is not an option, because it is not available in my country (Croatia).

  Hello

  I don t think you will be able to connect two external monitors to this laptop using HDMI and RGB port at the same time because of different types of signals.

  The RGB/VGA port supports analog signal.

  The HDMI port provides the digital video output and when the external monitor is connected to the HDMI port the device is set to HDMI.

  > * Hi-speed III port replicator is not an option because it is not available in my country (Croatia).
  What of the Dynadock? Its an external device connected to the s for computer laptop USB port.
  It supports own graphic unit and you can connect to another external monitor such Dynadock 2nd.

• How to connect an external monitor to the hp slate 21 pro

  I have a HP Slate 21 Pro. Anyone know how I can connect an external monitor to reflect what's on my tab

  Hello

  There is no way to connect an external cable monitor such that HDMI port is entered only.

  Your only solution would be to use the wireless display option in the settings, but you would need a monitor/TV/adapter that would work as a Miracast receiver.  I'm not sure specific screens that function as receptors, but I used adapters are the PTV3000 Netgear and Actiontec SBWD100A01,.

  I hope this helps.

  Kind regards

  COWA