Similar Questions

• Open new bookmark URL and FX scroll automatically for me, so focus is correct

  Hello:

  Y at - it a trick to get FX to open 1 URL and 2 rolls, the place I need on the web page is developed?
  If I minimize the, it is too small to read, so I need to scroll down.
  But I never get tired to do, whenever I open this Web page (which is a lot) for example about 15 times a day.

  I have the bookmark URL on my favorite bar.

  Thanks for your help.

  Well, that depends. Some pages contain a table of contents with links to the same page, followed by a "bookmark" or internal anchor. But if the page is that it is more difficult.

  I know an add-on with a feature like this, but I have not tried myself and judging by the number of facilities, it seems that almost nobody tried it: https://addons.mozilla.org/firefox/addon/finebook/

• flashing caps lock Maj and stop scroll / no start

  Hello

  I have an inspiron 9400 that had some problems lately.  Now, when I push the power button, the power light comes on but it does not start or even post.  The number lock stays on and the shift lock and select Lock lights blink for 40 seconds then it stops.  Of course, this can be only a few things but, how to know what mean these flashing lights.  I have search dell support, but found nothing.  Any help is greatly appreciated.

  Thank you

  
  

• to activate and create a shortcut for built in webcam.

  Hi, I have a dell studio 17 laptop computer and recently got it fixed because of the virus. Now, before I had a short cut to the Central webcam. Now even if it says in the control panel and inside the device manager says its installed and everythings fine I can actually get this device works. I can make it work when on Instant Messaging such as Skype, but I also use the screen small webcam for taking videos and pictures. Ive tried to check the drivers and it say everything is fine and updated day there.help?

  Hi Indie,

  It seems that the Webcam Central software installed on your computer is damaged. You can access the link below and try the troubleshooting steps proposed by Dell and check if it helps you to solve the problem of the webcam.

  http://support.Dell.com/support/topics/global.aspx/support/DSN/en/document?c=us&CS=19&DL=false&l=en&s=DHS&docid=721174079830ADD5E040AE0AB6E14D21&doclang=en

  I hope this helps. Let us know the results.

  Thank you and best regards,

  Srinivas R

  Microsoft technical support.

  Visit our Microsoft answers feedback Forum and let us know what you think.

• When I try to go to my page pintrest I get this message: {"status": "404"}. That is what this mean and how do I get to pinterest and stop using IE for the Web site

  Pintrest seems to be the only site where I get the error message: {"status": "404"}. So far all other sites developed.

  Reload Web pages and ignore the cache to refresh potentially stale or corrupt.

  • Hold SHIFT and click reload.
  • Press 'Ctrl + F5' or 'Ctrl + Shift + R' (Windows, Linux)
  • Press 'Command + shift + R' (MAC)

  Clear the cache and cookies from sites that cause problems.

  "Clear the Cache":

  • Tools > Options > advanced > network > content caching Web: 'clear now '.

  'Delete Cookies' sites causing problems:

  • Tools > Options > privacy > Cookies: "show the Cookies".
  • https://support.Mozilla.org/KB/how-clear-Firefox-cache
  • https://support.Mozilla.org/KB/deleting+cookies

• How to detect the stop scrolling

  Hi all

  I am currently working with the Bold and Storm, JDE 4.6.0 and JDE 4.7.0 respectively. I have the following question: How can I detect when the user stop scrolling? I have set up a ScrollChangeListener.scrollChanged () that detects when the user begins to scroll through the screen. At the moment, I put a Boolean variable in the true, but now I need to put the same variable to false when the user stops scrolling and I don't know how to do it. Any idea?

  Is there another listener or event that it would be useful for detecting the start and stop scrolling or the movement on my screen?

  Thanks in advance for your reply,

  Gabriela.

  Try to implement a TimerTask with Timer class to check the status of scroll each time.

• When I go to youtube for a video I can't download without a break there and wait that he download how can I fix this problem

  When I go on You Tube to watch a video, that I can't seem to download without a break there and waiting for a moment to download lond. How can I solve this problem?

  Hello

  I suggest you try the update the flash player latest version and check if it helps:

  http://get.Adobe.com/flashplayer/

  It will be useful.

• Y at - it a keyboard shortcut for 'pause' and 'summary '?

  I searched carefully but did not find such a shortcut. Y at - it a keyboard shortcut for 'pause' and 'summary' on the window of LabVIEW?

  Hi Finkler,

  If you use a debugging feature! And no, there seems to be no assigned shortcut key.

  When you need a VI with the possibility of "break" you should learn about state machines. They are a common system to integrate these 'States' as a 'Performance' or 'pause' in a VI (or the program in general)...

• How to stop and start a loop for

  I got the code and a loop running in a while loop.  What I need to do, is simply to suspend the processing of the loop until a condition is met, but retains its position of iteration throughout each pause time (not necessarily time, just paused until the following condition is met).  I tried wiring of a Boolean value to "continue if true" terminal of the for loop, but the reboot of the iteration count to 0 when the loop is restarted.  Is there a way to stop the loop for and continue to the particular iteration, it is in?

  Breakpoints, conditional, or normal are intended just for debugging your code.  I had the sense of your question as you want make a break is part of the normal operation of your code.  I would NOT recommend using a breakpoint for this situation.  It would make it appear the diagram showing the breakpoint when it occurs.  A user not to mention that the programmer wouldn't know what to do in this case.

  Yes, both the inner and outer loops would shift registers.

  Implementation of a structure dealing with a small loop inside the "case of a break" is feasible.  Depends on what you are or wait while the operation of the program is "paused."

• Break down and an object of a list/table of the index reference

  TestStand using I'm trying to figure out how to break down and an object reference to a table/list of the index. My sequence is attached. I received a few tips of the 3rd developer with VB code, what should be done. I'm having a problem translating in TestStand. VB code follows the description.

  I use .NET to run a 3rd party software using a sequence of imagery system and run 3rd party software tests. In TestStand, my "GetCurrentTests" approach, when an object for a specific sequence reference, returns a reference of type object ' object reference(system.collections.generic.list'1[Radiant.Imaging.TSEngine.ICommand]); expected return a list of tests in the sequence of part 3.

  Next steps "GetCurrentPattern" needs to index through this list in order to get and then define and display the display model of the specific test to start the specific test. This next step class is RadiantImaging.TSEngine.ICommand (interface) and returns an object reference (radiantImaging.PatternGenerator.Patterns.Patternbase): a reference to the model.

  What I'm confused about is decaying of the 'object reference(system.collections.generic.list'1[Radiant.Imaging.TSEngine.ICommand])' return value in order to provide the? indexed reference object for "Model of GetCurrent" step.

  VB code is provided below for me that shows how it can be done in VB. I'm not familiar enough with TestStand, .NET and VB to break down this >

  Any suggestions or advice is greatly appreciated.

  VB code:

  Public Class Form1

  Private PatternGenerator.IPatternGenerator MPG

  Private WithEvents mTestSequence as TSEngine.TestSequence Private Sub InitializeButton_Click(ByVal sender As System.Object, ByVal e As System.EventArgs) Handles InitializeButton.Click

  TSEngine.Settings.MeasurementSource = TSEngine.MeasurementSources.Camera

  TSEngine.Settings.SaveMeasurementsToDatabase = False

  TSEngine.Settings.SaveResultsToDatabase = True

  TSEngine.Settings.SerialNumberAllowDuplicates = True

  mPG = TSEngine.CurrentPatternGenerator

  TSEngine.Initialize ("C:\PM 4616197.rdb Calibration")

  TSEngine.Databasename = "C:\default Alpha_PEK_Date.pts".

  TSEngine.InitializeCamera)

  End Sub

  Private Sub RunButton_Click(ByVal sender As System.Object, ByVal e As System.EventArgs) Handles RunButton.Click

  mTestSequence = New TSEngine.TestSequence (1)

  Dim result as TSEngine.Tests.ResultEnum

  For i As Integer = 0 To mTestSequence.NumberTests

  Dim p As PatternGenerator.Patterns.PatternBase

  p = mTestSequence.CommandList (i). Model

  p.PatternGenerator = mi/gal

  mPG.MonitorType = PatternGenerator.Monitor.PrimaryPartial

  ' p.PatternGenerator.MonitorType = PatternGenerator.Monitor.PrimaryPartial

  p.PatternGenerator = mi/gal

  p.Show)

  result = mTestSequence.RunSingleTest (i)

  Dim results As List (Of TSEngine.IResult) = mTestSequence.CommandList (i). Result

  Results (i). Name

  mTestSequence.CommandList (i). ResultMeasurement.

  Next

  End Sub

  Technical support solution: "I spoke with R & D and they informed me that the type of data in question is a generic class that is not supported with the .NET adapter. You can change the data type of a code module to another using a data type of object reference, but you can not manipulate the generic classes within TestStand.

  "" "" You can find this information in aid of TestStand under NI TestStand environment reference help"TestStand adapters" adapters for .NET ' adapter .NET '.NET called settings ' settings not supported. Here, the solution would be to ask a code module that performs this task for you. »

  Change the settings for call .NET

  Parameters not supported

  The TestStand .NET adapter cannot call methods and properties that have arrays as parameters in staircase or return types and does not support structures that have shredded the members of the group.

  In addition, the .NET adapter does not support creating or call methods on generic classes.

  My solution was to implement the foregoing in VB.NET from TestStand .NET adapter does not support .NET generic data types.

• Y at - it a keyboard shortcut for stop windows updates?

  Hello world!

  I started a computer course to learn how to repair computers. Today our teacher told us there was a keyboard shortcut to stop updates of WIndows in Windows 7 previous student spoke to him last year, but he could not remember what it was. I have searched everywhere on the web to remind him but could not find anything. No one knows about it?

  Thanks in advance.

  Hello

  Thank you for visiting Microsoft Community and we provide a detailed description of the issue.

  According to the description, I understand that you want to know if there is a hotkey to stop updates of Windows on the system.

  Certainly, I understand your concern and will try my best to help you.

  I want to provide you with the information that as such there is no shortcut available to stop the Windows updates. You can disable just updates it automatically.

  To do this, please visit the link below and check if that helps.

  Activate the update or disable automatic

  http://Windows.Microsoft.com/en-us/Windows/turn-automatic-updating-on-off#turn-automatic-updating-on-off=Windows-7

  For reference:

  We may also refer to the article below and check if that helps.

  Keyboard shortcuts for Windows

  https://support.Microsoft.com/en-us/KB/126449

  Keyboard shortcuts

  http://Windows.Microsoft.com/en-GB/Windows/keyboard-shortcuts#keyboard-shortcuts=Windows-7

  I hope this information is useful.

  Please let us know if you need more help, we will be happy to help you.

  Thank you

• Shortcut for blackBerry Smartphones for scrolling from left to right?

  In order to read articles, I need just a zoom

  which shows both margins on my screen.  Which leaves

  me having to use the scroll ball L to R, back

  back and forth.

  Makes it very difficult to follow even the good line,

  Yet, I hear people on TV they say

  read the New York Times, etc. on their BlackBerry.

  I know that the shift key is the shortcut for scrolling down.  Can anyone

  Tell me a better way to scroll on the screen?

  I'm puzzled and just know that RIM would not intended like that.

  Of course, you enjoy all the time.

  In the browser have you tried view column?  This works very well for some web pages for me.

• Break-up and report parameters

  Hello

  My script is as follows:

  I have a report that shows the details of the customer for the given month.

  Previously, I've created this report with two parameters-

  (a) customer ID

  (b) month-year

  Now, I have to use burst to generate the report for each customer combination / month-year

  My questions are,

  (1) in this case, I have two KEY - customer and month-year values

  But, we can give a single value for the KEY.

  How can I add Customer ID as well as month-year in KEY tag?

  (2) if I have to use the breaking ability, I remove parameters - Customer ID and month-year

  Because, if I keep my dataset query filter on it

  and I get no results burst.

  Can I use parameters and burst at the same time?

  For example:

  My query was previously

  Select Customer_ID, Month_Year of clients where Customer_ID =: Customer_ID and Month_Year =: Month_Year

  In the application of fracture will be,

  Select Customer_ID, customer Month_Year

  I want to use the capabilities of two-

  (a) user must be able to view the report with parameters

  (b) user should be able to break out the report

  Thanks for help

  Here is my understanding

  Case 1 - the user should be able to run the report with parameters

  Here, I guess it's a type of text box parameter so that the user can enter values to run the report for specific data

  Case 2 - burst, you would want the report to run for all values regardless of input parameters

  Here, since it is a same report which is used to display online and burst, the input parameters will appear in both places.

  For example, to run the report for all values in the burst - modify your report as below

  1 remove all default values, so the parameters will be empty at the time of the break-up

  2. change your SQL to run to white input parameters

  Select Customer_ID, Month_Year of clients where Customer_ID = nvl(:Customer_ID,Customer_ID) and Month_Year = nvl(:Month_Year,Month_Year)

  Using the method described above

  -L' user can run the report for the specific input parameters

  -L' user can burst the report for all values

  
  

• Keyboard shortcuts for the video Composite and Audio Waveform

  I work in Premiere Pro CS6 on Mac OS 10.10.5. I am constantly switch between views video Composite and Audio Waveform in the Source monitor Panel. To do this, I have to use the mouse to click on the key icon, and then select one of the points just at the top of the context menu. My workflow would be so much faster if there was a keyboard shortcut.

  The official page of default keyboard shortcuts indicates no shortcut for these menu items. Mac OS system preferences > keyboard > shortcuts [shortcuts App] allows me to create shortcuts for application specific menu items, but not for context menus.

  Is there, however, a way that I can tell Premiere Pro CS6 to use a keyboard shortcut for the video Composite and Audio Waveform views?

  You can create your own... If you scroll the list link you to that, there is the Source section of monitor... which has options short keyboard available for your two wishes:

  

  Then, use Cmd / Alt + K to do your editing of the keyboard shorts... Scroll way down to find this section, then create a short. At the bottom, it will tell you if it comes into conflict with one another. Here I come to make Composite video, abbreviated as CC2015.2:

  

  By clicking on the line to the right of the effect you want to order makes these empty lines appear the "x" you will see in this view... click again and you can start typing your proposed short. If your entry on this line is already in use, will appear this very practical warning:

  

  So... do you some useful shorts!

  Neil

• I've been upgraded to El Capitan and electricity went off and stopped the session.  I don't have time to continue for 12 hours.  It is the CV.  How can I cancel until I have more time?

  I've been upgraded to El Capitan and electricity went off and stopped the session.  I don't have time to continue for 12 hours.  It is the CV.  How can I cancel until I have more time?

  Hello nancy milano,.

  Thanks for this info and choosing the communities Support from Apple. I know how important is able to complete your update to El Capitan at a later date! The good news is that you can simply delete the "install Mac OS X" install app in the Applications folder on your Mac. Then you can open the Mac App Store when you're ready to update and restart the download from the tab updates or searching through the Mac App Store for El Capitan. This is a resource that explains the process of update more:

  Update of OS X El Capitan

  See you soon!