Bridge of batteries - bug

Similar Questions

• Batch Enfuse for bridge script?

  Hi I'm looking for a batch enfuse for bridge script.  So far, I found a unique script built to call enfuse in Bridge (CS3) that could be a good starting point, but I have no experience with scripting and would appreciate any help that anyone can give to point me in the right direction.  Here's the script: http://dimview.org/phototips/BridgeEnfuse.jsx he is also a HCript I found to put the batteries in Photoshop that I might be able to combine with the enfuse script?- would like to automate chimneys open as layers + run action. Possible with script?

  What I want to do is to open the BridgeEnfuse.jsx script in CC bridge if nothing else, but we hope to build in the ability to batch enfuse every X number of images in Bridge, or batteries enfuse in batches of images in Bridge.  I'll be doing some experiments and will try to post back with my findings.  Any direction for the update of CS3 bridge CC oldBridge scripts would be really useful!

  I took a different turn here and moved to function «Merge to HDR...» "Lightroom with AHK scripting to allow the user to enter the number of supports and the number of batteries.  The script then emulates a 'stack images X"(which Lightroom has not at the time of the display), then"merge to HDR"batteries newly created batch of 25 every 15 minutes.

  Update - Unfortunately, these latest Lightroom updates have considerably slowed the merger to the HDR process and allow more more than 5 stacks in queue for the merger at the same time.  Only by using an earlier version of Lightroom is the ability to batch processing with the above really effective method.

• Bug of long date in Photoshop CS2 bridge

  I have been using Photoshop CS2 for many years and have constantly "lived with" a bug in the bridge by which, instead of a thumbnail of the image, there is just an icon displayed. It is the same icon that appears before bridge has read all images to produce thumbnails - but some of them get "stuck" and there seems to be no way to make the bridge 'read' the image and produce the thumbnail. Press 'View' 'Refresh' (or PF5) does not work. There is no difficulty that I can download to do this, please?

  If you select Tools/cache/purge cache folder xxxx does not update the thumbnail, and you always have an icon, that means bridge can not read the image because it is corrupted, a format not supported or does not correct codec.

• Bridge CS6 Mac XMP file Info group bug: can not copy / paste metadata

  The cmd keys / shortcuts does not work in btw xmp file info panel. in the xmp / iptc fields (e.g., cmd-c, cmd + v,...) of Adobe Bridge CS6 (Mac OS 10.6.8 and 10.7.3). You are not able to copy / paste information from one box to the other like the previous versions.

  This bug appears in the Info window of the file (open via alt + i) xmp in Bridge CS6 - if you change the information or metadata in the file info panel in Photoshop CS6 copy and paste from one field to another works.

  Shortcuts also work under Windows (tested on Vista).

  More than a month ago, I noticed this minor bug already in version beta of Photoshop CS6. I hope that this has been corrected in the official test version, but unfortunately it isn't. Although it is a minor bug, it is in my humble OPINION, a basic function and it would be very useful in my daily work - it's a shame, such a little thing does work with the application a bit boring.

  Well, you can always use the context menu to copy and paste.

  Frank

• Fix for nasty bug of Sandy Bridge badly on USB devices

  Anyone know if there is a fix yet, some USB devices fail intermittently on a new MB with Windows 7 64 - bit edition.

  It is a quad core running the Sandy Bridge chipset, and vodafone dongles does work, even if they did on W7 64 bit on the former Council.

  Fault too:-some external hard drives are not recognized on any port.

  Your hard drives are connected via SATA?

  There is a known issue with some Sandy Bridge chipsets, where ports SATA fail, don't know if it affects USB ports or not.

  Intel issued a notice of recall for this with the affected chipsets - did you check the Intel website to see if you are one of those affected

• BUG? Statement of BRIDGE to compare two tables

  Hello
  
  I tried to compare two tables different dbs and remembered a post on applications to Connectin Cross
  http://barrymcgillin.blogspot.com/2010/11/cross-connection-queries.html

  BRIDGE temparb AS "EB05 01"
  (SELECT * FROM arb)
  (SELECT * FROM temparb 
  MINUS 
  SELECT * FROM arb
  )
  UNION ALL
  (SELECT * FROM arb
  MINUS
  SELECT * FROM temparb 
  );

  I expect to get the differences between the ARB table in my current schema and the table alias temparb arb in the other db. Yet it seems that in this case only the table in my current schema is read.
  
  I materialize at the table BRIDGE with

  BRIDGE temparb AS "EB05 01"
  (SELECT * FROM arb)

  and select the value that I know to be only in the remote schema

  SELECT id FROM temparb WHERE id = 2562;
  SELECT id FROM arb WHERE id = 2562;

  Both times I get no results. I even tried to use aliases on the table, same result. Tested in EA3 3.0 and 3.1.
  
  Has anyone tried this before?
  
  Concerning
  Marcus

  Hi Marcus,

  Have you tried without the quotes around the name of connection?

  I have a named connection
  system_local
  which I run the following command

  drop table testbridge_remote;
  drop table testdbrige;
  create table testbridge (col1 int);
  insert into testbridge values (1);
  insert into testbridge values (2);
  insert into testbridge values (3);
  commit;

  I have a named connection
  Name of the connection with space
  I performed the following in the

  drop table testdbrige;
  create table testbridge (col1 int);
  insert into testbridge values (4);
  insert into testbridge values (5);
  insert into testbridge values (3);
  commit;

  Then I can execute the following statement in the connection of system_local/worksheet

  BRIDGE testbridge_remote as the name of connection with Space(select * from testbridge)
  + (SELECT * FROM testbridge_remote +)
  LESS
  SELECT * from testbridge
  +)+
  UNION ALL
  + (SELECT * FROM testbridge +)
  LESS
  SELECT * from testbridge_remote
  +);+

  It works well.
  Returns the rows in the remote table not in the local table and lines in the local table, not the remote table.

  Kind regards
  Dermot
  SQL development team.

• Create a bug of the metadata template in Bridge w / Vista 64

  I recently installed CS3 on a new 64 bit Vista PC.  When I go to create a metadata template in Bridge, sometimes only with a gray dialog instead of display options or checkboxes (see attachment).  Cannot understand it.  If someone knows a way to solve this problem, please let me know!

  Thank you!

  reset your preferences by holding the Ctrl key as soon as you start bridge. If done fast enough, you will get a dialog box before the start screen where you can reset appears the.

• Trackpad unresponsive - big bug

  Hello world

  Me and my GF had this problem surprisingly at the same time on two Macbook Pro 15 "(mi-2010 et mi 2012) 400 km far (so no sort of influence each other)"

  After the upgrade of El Capitan for the 10.11.5 release the trackpad becomes unresponsive/crazy and the cursor starts jumping around.

  We have tried to remove dust (although I've excluded because of maintenance I have for the Mac), clean the surface, reset the NVRAM, reset the SMC by removing the battery.

  No bumps have been detected on the batteries. We tried to hard cock down to the contrary simply stop the mac. No improvement.

  We were afraid of the virus and I have confidence I formatted my drive around and quickly installed new El Capitan. Still no improvement here.

  We always have this problem in safe mode.

  It seems pretty clear to me that this is a problem with the upgrade. Either the new firmware of the trackpad is bug, watch here is really annoying a planned obsolescence

  Do you have an idea of what kind of other tests I could try? Apple is aware of this problem? Thank you!

  MacBook Pro mid-2010

  2.66 GHz/8 GB RAM / 256 Apple SSD / GeForce GT 330 M / 1680 x 1050 px / 802.11 a/b/g / Bluetooth 2.1 / OSX 10.11.5

  MacBook Pro mid 2012

  2.3 GHz/16 GB RAM / 256 OCZ SSD / GeForce GT 650 M / 1440 x 900 px / 802.11 a/b/g/n / Bluetooth 4.0 THE / OSX 10.11.5

  looking for possible solutions here:

  https://support.Apple.com/en-us/HT203171

  Ciao.

• Satellite P750 - 10 c: HARD drive slows down - Sandy Bridge Cougar problem?

  Hello

  I have problem with my notebook Satellite P750 - 10 c with S/N: 4B478828K.
  When I enabled AHCI in the BIOS, computer slows diametrically, day after day was worste and worste, so I tried to change from AHCI to IDE and it helped a little, but is still not good.

  I tried to restore my system, but it did not help.
  I read that Intel has released a version tapped for Sandy Bridge chipset, I have (HM65) SATA 3Gbs problem (I just checked in HD Tune and HARD drive is connected to the port of 3Gbs), so I think I got bugged version.

  My laptop is not guaranteed, but Intel said they changed valid version, so where do I return my phone to fix.

  Kind regards
  Tomek

  > I read that Intel launched buggy version of the chipset for Sandy Bridge.
  The problem was a Cougar Point of Sandy Bridge chipset and not the main processor Sandy Bridge.

  In addition Intel said that this issue affected only the SATA 2 to 5 and not ports 0 and 1.
  Most laptops use only two devices SATA (HDD/SSD and ODD) using the affected ports 0 and 1.
  That is why I think that your problem could be linked to the issue of Cougar Point the Sandy Bridge chipset.

  By the way: not all Intel Sandy Bridge chipsets have been affected.

  Regarding your question:
  Usually if AHCI is enabled, the HARD drive must use the performance of SATA. If compatibility mode, the HARD drive would go at the speed of the IDE.
  I think your problem is perhaps related to the problem drive HARD and not Intel problem.

• E2500 v2 in Bridge mode loses the ability to manage the device.

  All E2500 v1 and v2 are configured with Firmware Version: 1.0.07

  I can handle all the v1, but I can not mange to v2. What Miss me?

  Is this a known bug? Is there a work around or I would stay 4 x E2500 that I just bought?

  All are running farm ware

  Internet - Cable modem - E4200
  |
  |
  |
  Cisco switch
  |  |  |
  |  |  |
  |  | Port WAN E2500 v2 (bridge mode) 192.168.1.33/24
  |  |
  | Port WAN E2500 v1 (bridge mode) 192.168.1.32/24
  |
  Port WAN E2500 v1 (bridge mode) 192.168.1.31/24

  Hello! Try to reflash the E2500 v2 firmware if it's the only one with a problem. Please refer to this link http://kb.linksys.com/Linksys/ukp.aspx?vw=1&docid=e9c2361ee7974d75913e61386a712188_4030.xml&pid=80&r... After the reflash, do a hard reset on the router. Do it right, please press and hold the reset button for 30 seconds while the unit is turned on. Release the button and unplug the router. Reconfigure the settings after that.

• EA3500 router in Bridge mode

  I will put up a second access point as at one end of the House's wireless signal is weak. I wired ethernet to the field. I have an EA3500 I'm trying to installing in bridge operation so that it acts as a WAP only. I tried this 10 times now. I have everything set up (SSID, pass phrases, channel, etc. and it works very well at that moment as a 2nd router.) As soon as I then put it in bridged mode, it becomes essentially a "router with an ethernet switch" wireless radio turn off (according to the tests with WiFi Analyzer). In addition, you can get is no longer at the admin page - and Yes, I know to use local access instead of the wifi chip. I use the new IP address of the router (I have a DHCP reservation for it on my main router). I gets to the sign in page, choose connect locally, enter the password, and he's going to 'pending' forever. Every time I do a factory reset and start over. There is no newer firmware than what this EA3500 comes with. It's obviously a serious bug with this model or a hardware problem. The documentation says that it works, and radio work fine until I turn it on in bridged mode - then they will switch off. The lack of access to the admin page (with her just enter "waiting") is also very frustrating. Each reset and return to work as a router - but I don't want two NATs on my network as my work WHAT VPN is not going to work through it.

  Anyone else tried mode on a bridged and got EA3500 it actually works? If so, how?

  Thank you!

  Jerry

  Jerrykham,

  There is a bug in the firmware that causes that when you select "obtain an IP address automatically".

  You must select "specify an IP address" and then enter the required information. Example: IP 192.168.1.2, netmask 255.255.255.0, default gateway 192.168.1.1 dns 8.8.8.8 (google public dns).

  The bug has been reported for more than a year and Linksys refuses to fix it. The bug affects EA3500, EA4500 and E4200v2 and perhaps others.

• EA6500 Bridge Mode

  Seems ther emight be a bug here.  The EA4500 Unliek that asks you a mode address bridge, the EA6500 seems to want two.  One for the WAN port and one for the side LAN port.  Weird, but here is where is the bug.  When you select bridge under INTERNET SETTINGS mode, I select the gateway for this device as 172.16.16.3 address.  Then under NETWORK LOCA, she wants an address for the side LAN but seems stuck with 192.168.1.1.  I can assume this is only a bug.  I try to make the side LAN 172.16.16.4 and it does not accept that it seems.  Basically I want to use this thing as an AP as well as use ports such as port cable for installation of AV.  I have this works fine on an EA4500, but on this new EA6500 settings seem strange.

  Figured it out. The LAN section is ignored in Bridge mode. A big good bug. This section must be shaded so it leaves suggesting he needs attention and a framework is really more than a quirk of the interface if nothing else.

• Poor performance TL2000 LTO6 and bridge iSCSI

  Hi, I have a serious performance problem with a TL2000 (LTO6) and an iSCSI bridge.
  Both the TL and the iSCSI bridge run the latest firmware (as of March 29, 2016).

  The backup server is running Windows 2008 R2 Sp1 with the latest updates installed. the server uses the driver recommended for the TL.
  The backup software's Netvault 11.

  The TL is connected to the gateway using the provided cable to SAS and the bridge is connected to the server with a N4032 switch (latest firmware here too), using a VLANs separated, jumbo MTU enabled (and on the bridge iSCSI network cards in the server too).

  I configured two NICs on the bridge, same subnet, a jumbo mtu and different ip address.

  I used this guide to connect to the server: www.dell.com/.../EN , as I followed the user guide to configure the iSCSI Gateway.

  The problem is that backup performance are unacceptable: backups on tape 5 MBs, while the same but on disk backups will work perfectly.

  I tried with jumbo mtu on and outside, with a single iscsi connection or multiple connections iscsi, using a single NIC on the bridge, and then together again. I tried all the driver versions available on the Dell Support for TL2000. I restarted TL, bridge iSCSi and server too: tape backup keep incredibly slow.

  IBM tool shows me the library and the tape like OK drive.

  If I use a unique iSCSI total on 5MBs throughput connection, if I use two connections, the total flow is always 5MBs, about 2.5MBs each connection.

  I tried to disable TUR (although is there a single server connected to the TL2000), but after Netvault lost the disc and in the Device Manager Windows, the drive did not show a yellow exclamation point, saying that the pilot cannot be initialized.

  Any idea or suggestion about this problem?

  Thank you in advance!

  The cause is a bug in the TL2000 firmware known in the last version (D.10, A22). We had to go back to C.30 and then backup started functioning at 40 / 50 MB/s.

• "show the alignment of the antenna-dot11" shows the bug in JA1 12.4 (25 d) for AP1262N

  Hello

  We have a couple of AP1262N-E-K9 AP with firmware version 12.4 (25 d) JA1 operating in conceerne mode.

  I tried to measure the quality of the signal between access points by a Repeater mode adjuster while all others are in root mode. Then I run the following command:

  dot11 Dot11Radio 0 - the alignment of the antenna

  Connected via the cable from the console, the following output is displayed:

  #dot11 AP Dot11Radio 0 - the alignment of the antenna

  Type escape sequence "control ^ ' to abort.

  Response of 64d8.1486.f000 Signal-24 dBm

  [...]

  Response of 64d8.1486.f000 Signal-25 dBm

  * 1 Mar 05:13:59.953: % DOT11-4-UPLINK_ESTABLISHED: the Interface Dot11Radio0, associated with 64d8.1486.f000 AP AP03 [no Wpa2 PSK]

  However, being connected via SSH:

  Dot11 AP # dot11Radio 0 - the alignment of the antenna timeout 2

  Type escape sequence "control ^ ' to abort.

  Type escape sequence "control ^ ' to abort. Timeout in 1 second.

  Obviously, there is no action displayed during the scan.

  So it must subsequently use the command 'show the antenna alignment' to get the values measured signal strength:

  AP00 #sh alignment of the antenna-dot11

  64d8.1486.f000 answer 25% of Signal 0 dBm

  [...]

  64d8.1486.f000 from 22% 0 dBm Signal response

  There are two problems:

  1. the output to 'see the dot11-alignment of the antenna' is incorrect, the value of % represents the signal strength in dBm without - (least). For example "-25 dBm" appears as "25% signal 0 dBm.

  Now, I know that this is only a display error, but it is still not clean. Is this a known issue?

  2. why the values of measured signal strength appear not on the SSH console during the test of the alignment of the antenna?

  Is it compulsory to use the console to see these values? Or is it also a known bug that could be fixed in the latest versions of firmware?

  Thank you for your support.

  Often, this command is used for real bridges and when you're on the roof trying to align its usually from the console. If the output should vary between a console and a ssh session, no.... You are in the CLI anyway.

  Your better off opening a TAC case on it because it looks like a bug of cosmetics.

  Sent by Cisco Support technique iPhone App

• TMS - TCS booking bug?

  Hello!

  A client of ours brought something to our attention that I could not find money for.  When a conference is for TMS and you include a content server, the e.164 alias that TMS will use to connect to the content server gets changed after saved the Conference.  Please refer to the attached picture for an example.

  This was seen on the following combinations;

  TMS 13.2, TCS S5.0

  TMS 14.3, TCS S5.3

  In each case the TCS is registered in the VCS as a gateway.  The standard booking > page new conference has been used.  It didn't matter if one personal record alias was used, or a system generic alias record.

  One thing to note: If a H323 ID has been used instead of the e.164 alias, the obtained address was not changed.

  Has anyone else seen elsewhere?  Y at - it a bug that I missed?

  Thank you!

  It's not a bug, I remember reading the documentation for it, but I don't remember where...

  According to the doc, TMS will create an individual alias for each to the application so, expected the TCS drop out for a reason, or the Conference being disconnected, it will, when reconnected, continue recoding to the original file, rather than create a new record. Thus, you will end up with just a single file instead of two or more separate session files.

  If my memory is good; This only happens when the TCS is configured as bridge as opposed to Terminal (not 100% sure of that even if.)

  In the chart below you can see the difference, however, is as well as, in this case, the first two digits in the two aliases are the prefix of the gateway.

  

  

  /Jens

  Please note the answers and score the questions as "answered" as appropriate.