Broke a piece off mac pro

Similar Questions

• How to fix or get data off Mac Pro with display/restart issues

  Hi, my early 2008 Mac Pro running El Capitan suddenly started to show lines all over the screen, then it restarted, displaying an error message and since then he's been stuck in a reboot loop never get past the progress bar and with very distorted display. Two questions:

  (1) any solution to this? It is an old machine, worked great so I would like to continue using it if possible, but do not want to put money in it at this stage.

  (2) what is the best way to get data out of the two internal drives to the machine on my Mac Air? I need to access the files on it, also like his 2 x 1 TB hard drives I will not be able to transfer the data on Air, but you will need to use them as external drives.

  Help appreciated!

  Get a dock like this

  http://www.felinediabetes.com/FDMB/forums/feline-health-the-main-forum.28/

  and take the readers on the Mac Pro and put them in the dock and connect to new mac via USB

  You can also get an enclosure that accept disks 3 1/2 in.

  In addition, you can get a bolt of lightning > FireWire adopter and connect the two Macs via FireWire and start the old mac in target disk mode

  How to use and troubleshoot disk mode target FireWire - Apple Support

  The error message say? Problem could be the graphics card bad or maybe bad memory.

  If you open the side cover are all diagnostic lights on?

• Mac Pro randomly turns itself off (again)

  Mac Pro randomly turns off by itself

  I have never got rid of the problem. Even after having replaced my card stock (radeon 5770) display with Asus Strix GTX 980 Ti, used a Corsair CX750 only power supply to power it. Look like anything, it's over heating, im stimulate fans PCI, exhaust and intake to 2500, 2000 and 2000 RPM (respectively). his strong!

  I'm tired of dealing with this old-tech, unreliable, expensive, overrated,... flat of the weight of the aluminum foil, so please find me a real solution/fix! I could easily put together a very decent PC that 'JUST WORKS' from what ive already spent trying to fix it.

  whenever he stops, I hear a click from the PSU (similar to the clicking sound when you press the power button on the front, commissioning). Trying next turn to the after he died, sometimes the power button will not turn on right away. I had to wait at least 10-15 sec to make it work. When it works sometimes stop with click 2 to 5 seconds after pressing the power button. He sometimes dies right after the chime. It starts also through without any problem.

  A few times when sometimes I watch the LED at the front of the Board (opposite the PCI fan) when he died, I see the two top LEDS blink once I hear that click, those who are highlighted red in the picture (not a picture of my Mac real). It also sometimes flashes when I press the button boot but used to power upward after that he died. Please, what that means?

• Mac Pro power off

  Mac pro desktop turns off with the disc in the optical drive after 20 seconds and does not start

  Are you saying that if you insert a disc, the computer stops?

  Have you tried different types of discs? Music, data, OS x install disc.

  With OSX install the disc can boot you this disk with the C button?

  • Note the next involuntary closing time. After the reboot, open the Console app in Finder > Applications > utilities and look for entries of the log at the time of reset. Suspicious message here.

  Search before the journal entry that begins with BOOT_TIME since it is the first line of a startup

• MAC Pro early 2008 display goes off during execution of CPU

  My Mac Pro screen turns off at random. I have two screens. Most when it goes out when the system processes more than workload, but he died sometimes even its not working any program. Any help would be appreciated.

  Details of the system

  MAC Pro early 2008

  2 2.8 GHz Quad - Core Intel Xeon processor: 8 strands

  32 GB OF RAM

  ATI Radeon HD 3870 - VRAM: 512 MB

  Cinema HD 1920 x 1200

  Cinema HD 1920 x 1200

  Note the time of the next problem. After the reboot, open the Console app in Finder > Applications > utilities and look for entries of the log at the time of the problem. Suspicious message here.

  Also check the fan on the video card. It runs smoothly and free of dust?

• Mac Pro randomly turns off by itself

  I've had this problem for almost a year now with my mac pro, mid 2013 A1289 and could not find a solution to this day. It randomly and spontaneously turns itself off. The boss is very random. I can turn it back on after a few seconds, but he always die on me shortly after. My warranty period is now over and it does not apply to service nearby (I must send it through flight to the nearest service).

  A few months back I asked my warranty and send it to apple. They said that they replaced the logic board. Many worked for a few weeks but the problem came back (at this time, that my warranty is over). not even the support of apple on the phone is unable to give me a solution. So, I did a lot of research and try to fix it myself with the help of Heads of the local computer. I suspected a overheating, but the problem came even when I turn it on for the first time in 2 days. I got a 2kva voltage stabilizer and APC back ups pro 1000, did not help. I got all my RAMS controlled, are all 100% working. I removed a few RAMS and switched around to see if there is problem with the slot machines, has not worked. I bought an SSD, deleted all my old HDD, installed a new OS, still the same problem. The only thing that I have not checked and now my only suspect because of the problem is the power supply.

  Sorry for making it very long but I wanted to be as detailed as possible. I lost a lot of time, thought and money. And it's hard not to feel deflated. Please, if there is someone out there who can find a solution, it would mean a lot.

  Note the next closing time. After the reboot, open the Console app in Finder > Applications > utilities and look for entries of the log at the time of the shutdow. Suspicious message here.

  Look before the entry titled BOOT_TIME because this indicates that the beginning of a startup.

  Also, what Mac do you have? A1289 indicates your desktop Mac Pro Tower silver and covers many years. The last silver Mac Pro Tower has mid-2012. I end 2013 Apple introduced the Mac Pro black trash

• UPS: turn off at Mac Pro every night

  I just bought a new power supply (UPS) uninterrupted and it comes with the option to transform the every night to save energy (after I stop the desk top Mac Pro).

  I searched the internet and Apple support communities and apparently there is no big advantage or disadvantage to stop the Mac Pro every night.  It does not harm the desk top, it allows to save some energy, and it makes it safe from hackers while I'm asleep.

  I can't find anything that tells me if there is a problem with completely set turned off power every night well.  Anyone know of any reason not to use "SHUT DOWN" and then turn off the UPS?  I guess the only difference it makes to the desk top Mac Pro is that it uses a battery to keep the current date and time.

  An overview of everything that will keep my Mac Pro (mid 2010) humming is greatly appreciated.

  It uses the battery to keep the current date and time.

  ... and to remember some system settings that must be available at the beginning of the start-up procedure, such as "where is the boot drive.

  If your Mac does not start, the battery is a Lithium long term non-powered cells of room behind the graphics card slot. It should measure about 3 Volts in your hand to be useful. BR2032 is what apple installed, CR2032 will work in a pinch. They are used in the door openers garage and car-door-keys.

• 2009 mac Pro turns off graphics load.

  Hi all

  My Mac Pro is a 2009 with updated firmware version to support 6-core processors clocked at 2.66 ghz. I have improved graphics, Sapphire HD 7950 / 3 gb (UEFI flashed).

  • While I use the computer for graphics intense situations (IE 3d rendering, games), the computer turns off. In order to get back to the computer, the power cord must be disconnected from the PSU. The computer then turns back on without any problem.
  • The question I have is if there is a power supply problem or not?  I put the GPU in a Windows machine and the graphics card run any graphic intense program with excellence.
  • I have reset the SMC, PRAM and looked at the newspapers, but I can't find a solution. I have currently the power supply of the machine, removed inspect the Board and clean the dust off the camera.

  Please ask for more information, you may know.

  Any help is greatly appreciated!

  Your symptom has been reported by users who have cheated on the power cords to the. Labour intensive overdraws the power available to the map, and overlap the food makes the unstable power and stops at the Mac.

  If your card has one or two 8-pin connectors, you may need more power than can be provided through two cords to the 6-pin.

• We have Acrobat 9 Pro running on both PCs, with 7 and 8 operating system. We would like to turn off a computer with 8 because we get it. We want to disable Acrobat, then download on a Mac pro. However, we do not have the

  We have Acrobat 9 Pro running on both PCs, with 7 and 8 operating system. We would like to turn off a computer with 8 because we get it. We want to disable Acrobat, then download on a Mac pro. However, we have not the deactivate option available in the drop down aid. Disabling is visible on another desktop computer. Can you advise us on how to disable it on the old laptop and download on the new laptop Mac?

  You can't do that. If you have a license for Windows, you can not use it on a Mac.

  In addition, Acrobat 9 is obsolete and is not compatible with any current operating system (including Windows 8, which is said by the way).

• MAC PRO MULTI SCREEN OFF ROAD...

  Bus (20 gHz bandwidth) is a MacPro Thunderbold2 (end 2013) combined with AMD over-pants 300, allow the connection of 2 screens UWQHD at 60 Hz?

  (A) knowing a MacPro announced limitation:

  Use multiple screens with your Mac Pro (end 2013) - Apple Support

  (B) successful personally tested the following configuration:

  "Connection to a 34" UWQHD (3440 * 1440) display as a secondary screen on Imac27 ' Thunderbold (mid2011) port using a mini Display Port to Display Port cable.

  This configuration bridges for the limitation of the AMD Radeon of 512 MB of the Imac27 (mid2011).

  However, he has worked to keep a refresh rate of 60 Hz.

  (C) does anyone at - he tried to connect 2 * 34 "UWQHD (3440 * 1440) poster on the Bus Thunderbold 3 1 (ex: TB1 and TB2 ports) using a mini Display Port to Display Port (or native TB cable if TB screen like LG)?

  And this configuration works at 60 Hz?

  Final goal is to connect 6 UWQHD 34 "screen on a Mac Pro at 60 Hz.

  Thanks for your comments.

  I could now test the following configuration:

  2 screens on bus 1 to on the Mac Pro:

  Eizo ev2750 1 (2540 * 1440) on the TB0 port using an miniDP/DP cable

  +

  1 LG34UC88 (model LG with no port of TB) in 3440 * 1440 on TB1 port using an miniDP/DP cable

  Both work at 60 Hz non-interlaced.

  I believes that this positive answer my own question here above even if it wasn't 2 * 34 "UWQHD (it is always above the spec announce Apple).

  However, I have 3 questions to void it please:

  Q1: Anyone know if the AMD over-pants 300 since the Mac Pro supports the technology 'free' for the synchronization of AMD.

  AMD sent me to Apple because it seems Apple develop its own driver AMD cards used in Mac.

  (no answer until now...)

  Can Q2: Someone please explain what benefit we can get using a screen offering a port TB compared to a screen offering a port DP (the two being connected on a TB on a Mac port)

  It seems that we will get no graphical difference, but that the native CT will wake up faster than the RFP and offer chaining (for connecting a USB key or on the screen a light on the Mac).

  No confirmation will be welcome, thank you.

  Q3: Is it possible to change the TB on a Mac Pro parameter to tell the machine than on a TB specific port (ex: TB1) cable (and thus the signal) is DP.

  This would shorten the time to a screen using DP cable on port of TB of awakening. Thanks again.

  Best regards

  Michel0008

• Mac Pro turns off and restarts

  I have a Mac Pro 5.1.  I recently installed a USB 3 card with Esata OWC.  Occasionally, the system will restart now.  Usually when I use DaVinci Resolve.  My CPU is not overheating. I have too much on the PCI bus?  It doesn't happen when I take out the card.  Here is the crash report.

  I have a GTX 970 installed with drivers from the web. (I already had an installed 570 and had the same problem)

  I have a card from Blackmagic with SDI IO.

  I have a concert PCI 480 OWC storage.

  Thank you!

  Crash report *.

  Anonymous UUID:

  DF1900A6-AF49-B25B-F9F2-88B76B27064B

  SAM 7 May 20:10:24 2016

  Panic report *.

  panic (cpu 4 0xffffff80153ce40a appellant): Kernel trap at 0xffffff7f95b1f02e, type 14 = page fault, registers:

  CR0: 0 X 0000000080010033, CR2: 0 X 0000000000000118, CR3: 0X000000064F043061 CR4: 0X00000000000226E0

  RAX: 0X0001102DB7BBD3E9, RBX: 0 X 0000000000000000, RCX: 0X000000004CFE13E4 RDX: 0 X 0000000000011029

  RER: 0XFFFFFF92E1E230D0, RBP: 0XFFFFFF92E1E230D0, IHR: 0X0001102DB7BBD3E9, RDI: 0 X 0000000000000000

  R8: 0 X 0000000000000000, R9: 0 X 0000000000000000 R10: 0XFFFFFF8015A17278 R11: 0XFFFFFF80158B57E0

  R12: 0XFFFFFF80417DC460, R13: 0XFFFFFF80440E8C60, R14: 0XFFFFFF80417DC400 R15: 0XFFFFFF80440E8C60

  RFL: 0 X 0000000000010286, RIP: 0XFFFFFF7F95B1F02E, CS: 0000000000000008, SS 0 X: 0 X 0000000000000010

  Lack of CR2: 0 x 0000000000000118, error code: 0 x 0000000000000000, CPU error: 0 x 4, PL: 0

  Backtrace (4 CPU), Frame: Return address

  0xffffff92e1e22d60: 0xffffff80152dab12

  0xffffff92e1e22de0: 0xffffff80153ce40a

  0xffffff92e1e22fc0: 0xffffff80153ec273

  0xffffff92e1e22fe0: 0xffffff7f95b1f02e

  0xffffff92e1e230d0: 0xffffff7f95b1f54c

  0xffffff92e1e23110: 0xffffff7f95b99267

  0xffffff92e1e23130: 0xffffff7f95b1df90

  0xffffff92e1e23170: 0xffffff7f95aed8dc

  0xffffff92e1e231d0: 0xffffff7f95aedd59

  0xffffff92e1e23200: 0xffffff7f9803b461

  0xffffff92e1e23280: 0xffffff7f9803a7f5

  0xffffff92e1e232e0: 0xffffff7f95a50b0b

  0xffffff92e1e23330: 0xffffff7f95a532c4

  0xffffff92e1e23390: 0xffffff7f95a58d7e

  0xffffff92e1e23460: 0xffffff80155392e8

  0xffffff92e1e234c0: 0xffffff80154deed8

  0xffffff92e1e23610: 0xffffff80154ebea1

  0xffffff92e1e237a0: 0xffffff80154eab39

  0xffffff92e1e23870: 0xffffff80154f012d

  0xffffff92e1e238e0: 0xffffff80154ee19e

  0xffffff92e1e23a80: 0xffffff80154e94c2

  0xffffff92e1e23d20: 0xffffff801571105c

  0xffffff92e1e23db0: 0xffffff801551b4d0

  0xffffff92e1e23e60: 0xffffff80157c64aa

  0xffffff92e1e23f00: 0xffffff80157c661e

  0xffffff92e1e23f60: 0xffffff8015827fa1

  0xffffff92e1e23fb0: 0xffffff80153eca76

  	Extensions of core in backtrace:
  	com.apple.iokit.IOStorageFamily (2.1) [DC1AAB7C-F417-3238-BB3F-2A5B84D67B90] @0xfff fff7f95a4c000-> 0xffffff7f95a72fff
  	com.apple.iokit.IOSCSIArchitectureModelFamily (3.7.7) [2F5D538F9]@0xffffff7f95ae9000-07D953DC-7B94-3AE8-A379-2 b 0 > 0xffffff7f95b13fff
  	com.apple.iokit.IOSCSIParallelFamily (3.0) [7C94C05D-4761-3D03-AB56-4CB7FCFA6039] @ 0xffffff7f95b1a000-> 0xffffff7f95b2bfff
  	dependency: com.apple.iokit.IOSCSIArchitectureModelFamily (3.7.7) [02F5D538F9]@0xffffff7f95ae9000 07D953DC - 7 B 94-3AE8-A379-2 b
  	com.newer - Tech.kext.mxpciel2esu3_usb (1.2) [95CD2269-3472-3679-A968-ACD2F24F8103] @ 0xffffff7f95b79000-> 0xffffff7f95badfff
  	dependency: com.apple.iokit.IOSCSIParallelFamily (3.0.0) [7C94C05D-4761-3 D 03 - AB56 - 4CB7FCFA603 9]@0xffffff7f95b1a000
  	dependency: com.apple.iokit.IOPCIFamily (2.9) [4FE41F9B-2849-322A-BBF8-A94816C003D6] @ 7f95b2c000 0xffffff
  	com.apple.iokit.IOSCSIBlockCommandsDevice (3.7.7) [CFF0A65E-BE53-3509-9 d 73 - DDFB57A 52F04]@0xffffff7f98039000-> 0xffffff7f9804ffff]
  	dependency: ffff7f95a4c000 @0xff com.apple.iokit.IOStorageFamily (2.1) [DC1AAB7C-F417-3238-BB3F-2A5B84D67B90]
  	dependency: com.apple.iokit.IOSCSIArchitectureModelFamily (3.7.7) [02F5D538F9]@0xffffff7f95ae9000 07D953DC - 7 B 94-3AE8-A379-2 b

  The process corresponding to the current thread BSD name: mds_stores

  Boot args: nvda_drv = 1

  Mac OS version:

  15E65

  Kernel version:

  15.4.0 Darwin kernel version: Fri Feb 26 22:08:05 PST 2016; root:XNU-3248.40.184~3/RELEASE_X86_64

  Kernel UUID: 4E7B4496-0B81-34E9-97AF-F316103B0839

  Slide kernel:

  0 x 0000000015000000

  Text of core base: 0xffffff8015200000

  Text __HIB base: 0xffffff8015100000

  Name of system model: MacPro5, 1 (Mac-F221BEC8)

  Availability of the system in nanoseconds: 299243519628898

  last load kext to 299240993980004: com.apple.driver.AppleXsanScheme 3 (addr 0xffffff7f98057000 size 32768)

  Finally unloaded kext to 288317647533104: com.apple.driver.AppleHIDKeyboard 181 (addr 0xffffff7f98050000 size 28672)

  kexts responsible:

  com.nvidia.CUDA 1.1.0

  com.nvidia.web.GeForceWeb 10.1.1

  com.nvidia.web.NVDAGM100HalWeb 10.1.1

  com.nvidia.web.NVDAResmanWeb 10.1.1

  com Blackmagic - design.desktopvideo.iokit.driver 10.3.1

  com Blackmagic - design.desktopvideo.iokit.framebufferdriver 10.3.1

  com.newer - tech.kext.mxpciel2esu3_esata 1.2.0

  com.newer - tech.kext.mxpciel2esu3_usb 1.2.0

  com.newer - tech.kext.nwtmem 1.0.0

  com Apple.filesystems.smbfs 3.0.0

  com.apple.driver.AppleHWSensor 1.9.5d0

  com Apple.filesystems.autofs 3.0

  com.apple.driver.AudioAUUC 1.70

  com Apple.Driver.pmtelemetry 1

  com.apple.iokit.IOUserEthernet 1.0.1

  com.apple.iokit.IOBluetoothSerialManager 4.4.4f4

  com.apple.Dont_Steal_Mac_OS_X 7.0.0

  com.apple.driver.AppleTyMCEDriver 1.0.2d2

  com.apple.driver.AGPM 110.21.18

  com.apple.driver.AppleOSXWatchdog 1

  com.apple.driver.AppleMikeyHIDDriver 124

  com.apple.driver.AppleUpstreamUserClient 3.6.1

  com.apple.driver.AppleMCCSControl 1.2.13

  com.apple.driver.AppleHDA 274.7

  com.apple.driver.AppleMikeyDriver 274.7

  com.apple.iokit.BroadcomBluetoothHostControllerUSBTransport 4.4.4f4

  com.apple.driver.AppleHV 1

  com.apple.driver.AppleLPC 3.1

  com.apple.driver.ACPI_SMC_PlatformPlugin 1.0.0

  com.apple.driver.AppleIntelSlowAdaptiveClocking 4.0.0

  com.apple.iokit.SCSITaskUserClient 3.7.7

  com.apple.AppleFSCompression.AppleFSCompressionTypeDataless 1.0.0d1

  com.apple.AppleFSCompression.AppleFSCompressionTypeZlib 1.0.0

  com.apple.BootCache 38

  com.apple.driver.AppleFWOHCI 5.5.2

  2.8.5 com.apple.iokit.IOAHCIBlockStorage

  com.apple.driver.Intel82574L 2.7.0b1

  com.apple.driver.AirPort.Brcm4331 800.20.24

  com.apple.driver.AppleAHCIPort 3.1.8

  com.apple.driver.usb.AppleUSBEHCIPCI 1.0.1

  com.apple.driver.usb.AppleUSBUHCIPCI 1.0.1

  com.apple.driver.AppleIntelCPUPowerManagementClient 218.0.0

  com.apple.driver.AppleRTC 2.0

  com.apple.driver.AppleHPET 1.8

  com.apple.driver.AppleACPIButtons 4.0

  com.apple.driver.AppleSMBIOS 2.1

  com.apple.driver.AppleACPIEC 4.0

  com.apple.driver.AppleAPIC 1.7

  com Apple.NKE.applicationfirewall 163

  com Apple.Security.Quarantine 3

  com.apple.security.TMSafetyNet 8

  com.apple.driver.AppleIntelCPUPowerManagement 218.0.0

  com.apple.driver.AppleXsanScheme 3

  com.apple.driver.AppleHIDKeyboard 181

  com.apple.iokit.IOSCSIBlockCommandsDevice 3.7.7

  com.apple.iokit.IOUSBMassStorageDriver 1.0.0

  com Apple.kext.Triggers 1.0

  com.apple.iokit.IOSurface 108.2.1

  com.apple.driver.DspFuncLib 274.7

  com.apple.kext.OSvKernDSPLib 525

  com.apple.iokit.IOAcceleratorFamily2 205.3

  com.apple.AppleGraphicsDeviceControl 3.12.6

  com.apple.driver.AppleSMBusController 1.0.14d1

  com.apple.driver.AppleSMBusPCI 1.0.14d1

  com.apple.driver.CoreCaptureResponder 1

  com.apple.iokit.IONDRVSupport 2.4.1

  com.apple.iokit.IOBluetoothHostControllerUSBTransport 4.4.4f4

  com.apple.iokit.IOBluetoothFamily 4.4.4f4

  com.apple.driver.AppleHDAController 274.7

  com.apple.iokit.IOHDAFamily 274.7

  com.apple.iokit.IOGraphicsFamily 2.4.1

  com.apple.iokit.IOAudioFamily 204.3

  com.apple.vecLib.kext 1.2.0

  com.apple.iokit.IOSerialFamily 11

  com.apple.iokit.IOFireWireIP 2.2.6

  com.apple.driver.IOPlatformPluginLegacy 1.0.0

  com.apple.driver.IOPlatformPluginFamily 6.0.0d7

  com.apple.driver.AppleSMC 3.1.9

  com.apple.iokit.IOSlowAdaptiveClockingFamily 1.0.0

  com.apple.driver.usb.IOUSBHostHIDDevice 1.0.1

  com Apple.Driver.USB.cdc 5.0.0

  com.Apple.Driver.USB.Networking 5.0.0

  com.apple.driver.usb.AppleUSBHostCompositeDevice 1.0.1

  com.apple.driver.usb.AppleUSBHub 1.0.1

  com.apple.iokit.IOSCSIMultimediaCommandsDevice 3.7.7

  com.apple.iokit.IOBDStorageFamily 1.8

  com.apple.iokit.IODVDStorageFamily 1.8

  com.apple.iokit.IOCDStorageFamily 1.8

  com.apple.driver.CoreStorage 517.20.1

  com.apple.iokit.IOFireWireFamily 4.6.0

  com.apple.iokit.IOAHCISerialATAPI 2.6.2

  com.apple.iokit.IOSCSIParallelFamily 3.0.0

  com.apple.iokit.IOSCSIArchitectureModelFamily 3.7.7

  com.apple.iokit.IO80211Family 1110.26

  com.apple.iokit.IONetworkingFamily 3.2

  com Apple.Driver.corecapture 1.0.4

  com.apple.iokit.IOAHCIFamily 2.8.1

  com.apple.driver.usb.AppleUSBUHCI 1.0.1

  com.apple.driver.usb.AppleUSBEHCI 1.0.1

  com.apple.iokit.IOUSBFamily 900.4.1

  com.apple.iokit.IOUSBHostFamily 1.0.1

  com.apple.driver.AppleUSBHostMergeProperties 1.0.1

  com.apple.driver.AppleEFINVRAM 2.0

  com.apple.driver.AppleEFIRuntime 2.0

  com.apple.iokit.IOHIDFamily 2.0.0

  com.apple.iokit.IOSMBusFamily 1.1

  com Apple.Security.sandbox 300.0

  com.apple.kext.AppleMatch 1.0.0d1

  com.apple.driver.AppleKeyStore 2

  com.apple.driver.AppleMobileFileIntegrity 1.0.5

  com.apple.driver.AppleCredentialManager 1.0

  com.apple.driver.DiskImages 417.2

  com.apple.iokit.IOStorageFamily 2.1

  com.apple.iokit.IOReportFamily 31

  com.apple.driver.AppleFDEKeyStore 28.30

  com.apple.driver.AppleACPIPlatform 4.0

  com.apple.iokit.IOPCIFamily 2.9

  com.apple.iokit.IOACPIFamily 1.4

  com Apple.KEC.pthread 1

  com Apple.KEC.corecrypto 1.0

  com.apple.kec.Libm 1

  Model: MacPro5, 1, BootROM MP51.007F.B03, 6 6-Core processors Intel Xeon 3.33 GHz, 24GO, MSC 1.39f5

  Graphics card: NVIDIA GeForce GTX 970, NVIDIA GeForce GTX 970, PCIe, 4 095 Mo

  Memory module: DIMM 1, 8 GB, DDR3 ECC, 1066 MHz, 0x85F7, 0 x 463732314755363546393333334700520000

  Memory module: DIMM 2, 8 GB, DDR3 ECC, 1066 MHz, 0x85F7, 0 x 463732314755363546393333334700520000

  Memory module: DIMM 3, 8 GB, DDR3 ECC, 1066 MHz, 0x85F7, 0 x 463732314755363546393333334700520000

  Airport: spairport_wireless_card_type_airport_extreme (0x14E4, 0x8E), Broadcom BCM43xx 1.0 (5.106.98.100.24)

  Bluetooth: Version 4.4.4f4 17685, 3 services, 27 aircraft, 1 incoming serial ports

  Service network: Ethernet 1, Ethernet, en0

  Network service: Airport, AirPort, en2

  Serial ATA Device: HL-DT-ST DVD - RW GH41N

  Serial ATA Device: HL-DT-ST BD-RE BH12LS35

  Serial ATA Device: OWC Mercury Electra 3G SSD, GB 960,2

  Serial ATA Device: WDC WD20EARX-008FB0, 2 TB

  Serial ATA Device: ST6000NM0024-1HT17Z, 6 TB

  Serial ATA Device: WDC WD60EZRZ-00RWYB1, 6 TB

  Serial ATA Device: WDC WD60EZRZ-00RWYB1, 6 TB

  Serial ATA Device: OWC Mercury Accelsior PCIe SSD, 479,95 GB

  Serial ATA Device: MARVELL VIRTUALL

  SCSI device: Equipment of SCSI target @ 0

  USB device: USB Bus

  USB device: element-Tk

  USB device: USB Bus

  USB device: USB Bus

  USB device: Hub BRCM2046

  USB Device: USB Bluetooth host controller

  USB device: USB Bus

  USB device: USB Bus

  USB device: USB Bus

  USB device: USB 2.0 Bus

  USB device: External USB 3.0

  USB device: USB 2.0 Bus

  USB device: Hub

  USB device: USB OPTICAL MOUSE

  USB device: Keyboard Hub

  USB Device: Apple keyboard

  USB device: Hub

  FireWire devices: built-in_hub, up to 800 Mb/s

  Crush Bus:

  Well, the IO freezes, you know the combined power of PCIe cards?

  • Global maximum 300W for all PCI Express slots

• CC Adobe on my new Mac Pro does not complete the installation after running the Migration Wizard

  Hey guys, just bought a mac pro, and assistant of migration used to transfer my programs, now adobe cc stops half way through installation and said: cc adobe, requires to solve this problem, is damaged or missing, download and install adobe cc on "http..., tried to download it again, did not work, anyone who knows what to do?"

  Hello

  Creative cloud apps cannot be migrated as a return to the top, you will need to download and install apps as a new on the new machine, please follow the steps below to remove and reinstall the creative cloud application:

  1 force quit Adobe all processes in the activity monitor (for example, CC, Core sync, the broker CC library, Office, Adobe, Adobe CPI, demon Adobe Crash etc..)

  2-go to: Finder > Applications > utilities > Adobe installer > uninstall Adobe Creative cloud (if problems uninstall Trash)

  3-go to: Finder > Applications > utilities > (delete these two folders - creative cloud Adobe and Adobe Application Manager )

  4 - right click on the Finder icon, then select the "Go - To" folder. You will get a text box, type in the following command and then press the 'return '. ("Not to be missed ~ symbol")

  ~/Library (It will open the folder of the user's library.)

  5. browse to the Application Support > Adobe > trash folder OOBE and AAM Updater folder so

  6. new > right-click on the icon in the Finder and select "go to" folder option. > you will get a text box, type in the following command and then press the 'return '.

  / library (It will open the library system folder.)

  7. browse to the Application Support > Adobe > trash folder OOBE and Adobe Application Manager / after that, rename the SL-STORE like SL-STORE_OLD

  8 - go to the Apple icon > System Preferences > privacy and security > firewall > OFF (to do this, you will need to click on the padlock in the lower left of this machine and then enter your mac password)

  9 - go to the Apple icon > System Preferences > Security and privacy > General > allow applications downloaded on should be put on ANYWHERE

  10 - Make sure of course there is no other program security Internet enabled - if it is then go ahead and launch CC app and login and check (check your extensions as well id browser it disable any toolbar security or advertising, blocking of extensions you installed them)

  Adobe 11 - run cleanup tool. > If so, select "Adobe Application Manager for Mac OS X 10.6 ' and then click on"Clean up selected. "

  http://download.Macromedia.com/SupportTools/cleaner/Mac/AdobeCreativeCloudCleanerTool.dmg

  12 - Click on the link below and download Creative Cloud Installer file and use them to install the creative Cloud Desktop application.

  https://ccmdls.Adobe.com/AdobeProducts/KCCC/1/OSX10/CreativeCloudInstaller.dmg

• CS5 will still support the MCE Blu - ray on Mac Pro Player?

  It's basically my question:

  CS5 will still support the MCE Blu - ray on Mac Pro Player?

  It is y harly any info the hardware on the web site of Adobe support more. It's just all hype sales!  They used to tell you which disks have been supported, but now that still seems to just be an afterthought in CS5, there is not ehardware in detail everything that is taken in charge and what is not...

  This new MCE Blu - ray player looks like a wonderful solution, but only if Encore CS5 on Mac would support it.

  Thank you!

  I am positive that your Mac Pro has the connectors. The SATA cable it can be somewhat difficult if you're not comfortable deleting some parts with a screwdriver, but I found it very easy.

  Cables SATA sitting around, I had had a little long boxes on the ends of the connector forcing me to have to remove a small amount of plastic from the piece of fan housing. I think that if you buy a kit from OWC cable they include cables that are lower profile but whatever it is, it's not too bad. I just use a dremel to remove a small piece about 1 "x 1" directly above the ports. "

  Here are some instructions I found: http://www.newertech.com/downloads/nwtmpqxe32.pdf (Note: the pages in this guide are all mixed!) These guys here sell a kit that delivers these unused ports of SATA to eSATA ports.

  You will see that they have low profile cable I was referring to that and so they didn't need to cut the case fan at all. I would say just OWC (www.macsales.com), because they know what you are looking for and you can sell a kit that has the cables you need, including 4-pin-power to SATA power. I recommend you to install the two cables while you're here, so if you later decide to add another SATA drive or an SSD, you will not need to take off again. BTW, add an OCZ Vertex 2 60 GB SSd drive as my boot drive for the OS and applications has been the single most visible upgrade I did and makes the Mac Pro just smoke! Same value as I just pasted the small SSD up there in the optical Bay without a mounting kit, and it works great!

  In all honesty, theough, the external enclosure for Blu - Ray works well and is easier to access the drive, because it is now located on my desktop. If you're uncomfortable to disassemble your machine just get quadruple housing interface with the chip set Oxford 934DSB that I can guarantee you that it works out of the box. It cost $140 for the whole machine, not bad compared to the alternatives.

  The reader is this: LG WH10LS30. Looks like it's still on sale for Newegg $79 until the end of the year.

  Housing I have is the following: BYTECC ME535-Limited-BK. Another $60. The OWC, looks a lot prettier in a Mac environment but costs $40 more for the same features all in brushed aluminium.

  I've been creating and burning with yet but Roxio Toast 10 Titanium burns and the authors of the Blu - Ray just wanted to make a CD/DVD

  Good luck!

• Receiver WiFi for Mac Pro (early 2008)

  The Mac Pro, I had originally was without a wifi receiver out of the box. My office is now off by an Ethernet connection. I tried the USB Datalink receivers and they... I won't go into that. I got lucky with the Netgear Powerline product until recently, but that was a fight lately. Is there a market after product I can get, or similar to what Apple Mac Pro to receive WIFI?

  Thanks in advance,

  DAve K

  https://eShop.MacSales.com/item/Apple/BCM94322MCK/

• Installation 10.11.6 El Capitan with 10.6.8 Snow Leopard on old Mac Pro 4.2 multiboot?

  Looking for savvy here advice...  I have an old Mac Pro 4.2 (cheese grater) that runs Snow Leopard 10.6.8.  It is a wonderful workhorse machine, who served me tirelessly for many years.  It is obviously older and slower, but works very well.  I love 10.6.8.  If Apple ever updated the Mac Pro line (I know, probably not... sigh...), I'll buy one and replace this machine.  Until then, I keep doing this work.

  This machine is a beast, has been upgraded with internal hard drives 1 TB three (he also got a couple internal HDs inherited from 750 and 500 MB used for storage).  I have also several external 1-4 to, hip, FW800 drives too.  A host of storage, of course, and should be a lot of options to start on several systems.

  I am generally satisfied with 10.6.8 on this machine, although there are obvious limits to that.  I would get one or two operating systems newer on it, pick-and-choose between them according to the needs, but I absolutely want to/need to preserve the ability to initiate and run 10.6.8 systematically as my operating system on the day the day, at least for now.  Maybe I'll warm to one of the others on this machine eventually, but 10.6.8 must remain usable, install a newer OS on other readers may not nerve there.

  On a year-and-a-half ago, I took a race to install 10.10.3 Yosemite on one of the internal disks.  This doesn't quite work.  I moved, sniffed Yosemite everywhere, don't really like it a lot and went to restart and him switch back to 10.6.8 for a bit.  Initially, it was impossible (from less than I expected, would be the same old process, I have always used, via system preferences > startup disk).  You can read the details of this experience here and more here if you are interested.  This latest attempt to get Yosemite on this machine was a very negative experience.  Yosemite is still there on an internal HD, but I tried not to boot on it since then.

  Now I take another look at this.  What is the engine now, is that I want to update my iPad Mini 3 iOS 10.  But that (update of an iDevice iOS 10) requires iTunes 12.5.1.  And iTunes 12.5.1 requires Mac OS X 10.9.5 or newer - it won't work with 10.6.8.  I'm looking for my options.

  Right now, I have three large internal HDs: HD #1, 2 # HD and HD #3, each 1 TB.

  HD #1 has 10.10.3 Yosemite on this.  I started from this time and have not resumed since.

  HD #2 has 10.6.8 Snow Leopard top.  This is my main operating system and startup of daily drive.

  HD #3 is nothing special about it.

  Although HD #1's Yosemite about that, I have only started from this disc once and hesitate to go back, at least until I can get a way easy and reliable to restart off HD #2.

  I understand that I can also get 10.11.6 El Capitan.  I thought that installing on HD #3.  That sounds like a reasonable to add option, but again, I want to make sure it won't cause problems to switch back to start off HD #2 in Snow Leopard (such as installation of Yosemite on HD #1).

  What is the best way for me to go about safely - preserve the option to start easily in 10.6.8 on HD #2?

  Thanks for the help!

  If you start or restart now Option (Alt) key and calls the Startup Manager, you should be given the choice at the start of any boot disk OS X on any of the readers.

  See > How to choose a boot on your Mac - Apple Support drive