Brother mfc-J285DW installation

Similar Questions

• Installation of the Brother MFC-240 c failure

  OK, so I installed a printer/scanner/copier (Brother MFC-240 c) and my (Dell Studio 1749) system became slow insainly! so I restarted. then the Windows Aero effect disappeared and that basic services has begun. so, basically is started in Mode safe without the trunk. I couldn't do anything requiring a parameter system, or something of the sort. I tried to restore it and I got a message that the required services could not be started! that has been the standard message for everything. I got it somehow to start as it should, but now Kaspersky is sayign databases are corrupted and I can't understand it. Well. But what I would do if it were to happen again? I finally restored the 17/09/10 somehow. IM fine with the way it is now, but I want to what to do if that should ever happen again, and what I can do to prevent it. any help would be amazing! Thank you!!!

  Hello

  ·        You are able to use the printer on the system?

  I suggest you follow the steps mentioned below.

   

  Method 1:

  I you suggest to uninstall the printer from the system and perform a clean boot, and then install it and check.

  Step 1:

  Uninstall the system printer.

  Step 2:

  To perform a clean boot follow the steps mentioned in the link given below.

  How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7

  http://support.Microsoft.com/kb/929135

  Note: Follow step 7 to start the computer in normal startup.

  Step 3:

  Reinstall it on the system.

  See the article mentioned below.

  Install a printer

  http://Windows.Microsoft.com/en-us/Windows7/install-a-printer

  Method 2:

  I suggest you to optimize Windows 7 for better performance.

  OptimizeWindows 7 for better performance

  http://Windows.Microsoft.com/en-us/Windows7/optimize-Windows-7-for-better-performance

  Thanks and regards.

  Thahaseena M
  Microsoft Answers Support Engineer.
  Visit our Microsoft answers feedback Forum and let us know what you think.

• Webroot antivirus - installation Brother MFC-7820N printer

  I downloaded Printer Brother MFC-7820N and then installed Webroot antivirus protection twice.  Each time, it will work for about 2 impressions, then it will say "brother printer is in error", then it accumulates in the printer (as.)  I double check printers, try to add the printer again, but get an error message "Active Directory is not available at this time."  Please provide all the assistance!

  Brother printer support: http://www.brother-usa.com/support/default.aspx

  
  
  And/or
  Webroot support: http://www.webroot.com/us/en/support/support-home

• All-in-one printer, Brother MFC-9700

  I have a new laptop that has a Windows 7 operating system.  It does not recognize my printer Brother MFC-9700.  I found a site that appears to let me do a free download - but for compatibility status, he asks if I have a 64-bit or 32-bit system.  How can I determine that?

  In addition, I don't want to crush by current drivers that work with my old computers.  This download may be a driver separately on my printer?

  I want to make the download of my new laptop - or just use my old computer to download the Windows 7 driver for the printer.  Access to the laptop is via a wireless router only.

  Any suggestions/step by step directions about the conduct of a download would be useful.  I'm a Novice Senior.  Will be

  I have a new laptop that has a Windows 7 operating system.  It does not recognize my printer Brother MFC-9700.  I found a site that appears to let me do a free download - but for compatibility status, he asks if I have a 64-bit or 32-bit system.  How can I determine that?

  In addition, I don't want to crush by current drivers that work with my old computers.  This download may be a driver separately on my printer?

  I want to make the download of my new laptop - or just use my old computer to download the Windows 7 driver for the printer.  Access to the laptop is via a wireless router only.

  Any suggestions/step by step directions about the conduct of a download would be useful.  I'm a Novice Senior.  Will be

  How do you know if you have Windows 32 or 64-bit

  Start > right click on computer

  Select Properties

  Under system, you will see listed Windows 32-bit or 64-bit

  32-bit applications can run on 64-bit systems, but not vice versa

  When you run older applications, you should consider the installation of XP Mode with Virtual PC for Windows 7 (free)

  http://www.Microsoft.com/Windows/Virtual-PC/Download.aspx

  It's as easy as 1-2-3

  Update of Brother MFC-9700 downloads - I suggest that you always go here looking for drivers.  You want to maybe create a folder and make the backup copies of the software.

  http://welcome.solutions.brother.com/BSC/public/us/us/en/DLF/download_top.html?reg=us&c=us&lang=en&prod=mfc9700_us

• Brother MFC-7420 does not appear on the Device Manager

  I run a Brother MFC-7420 on Windows Vista - do it for a few years. Last week, it stopped printing in the middle of a report. When I print, it shows Status: Error. I did that the USB is correctly plugged at the end of the printer and hard drive. I uninstalled, rebooted and reinstalled the driver software. The installation will not accomplish when I reconnect the USB hard drive according to the instructions. The printer does not appear in Device Manager - is usually present in the other devices folder, but who is absent too. Other thoughts?

  Found a solution to the problem - had to install with a USB port - see below:

  http://social.technet.Microsoft.com/forums/en-us/w7itproinstall/thread/4cae5aad-0ca0-431f-8774-70b9842baaf2

• Problem install driver Brother MFC 8300 (using Windows Update)

  I need help for my printer to work with a new installation of Windows 7 Home Premium 64-bit.  I had to reinstall due to a CMOS error, I think it was because of a dead battery.  It could even be something else because I had other problems with this facility (explained below).  In any case, the printer is a former Brother MFC 8300 (he was a workaholic!).  Past times, I have re-installed Windows, there have not been any problems with this printer.  I just install Windows Update driver (the driver is named 'Brother MFC8600/9650 Series' in Device Manager).  But this time the installed "Windows Update" the driver and says that everything is working properly but when I go to "Devices and printers" it does not appear in "Printers and faxes" (as he usually does).  FYI, there is a list for "USB Composite Device" in "Devices" that shows "Brother MFC8600/9650 series" as a scanner.  Don't know what that means.

  I also tried to manually download the driver of 'catalog.update.microsoft.com '.  I downloaded 2 different versions of the driver.  It has a size of 2.0 MB file and the other has a 2.3 MB file size.  I found myself by installing do not either because I didn't know where the appropriate destination location has been using the 'Expand' of the 'Command Prompt' command with "expand -F: * " ."  I think that the file for the "Windows Update" file size is 2.1 MB (my memory is not the biggest however).

  I am running as a "Standard user", but I installed all the drivers of devices as an administrator.  I also noticed a problem with an application that I used before this re - install, "Ultracopier.  On installs previous he has installed fine and he demanded 'Administrator' rights after the start.  But during this installation, it did not work at all and did not 'Administrator' rights after the start.  I also had problems with a 2 to external hard drive related to the permissions and access to certain files and folders.  I don't know if any of this matters but I thought that the more information the better.

  I hope someone can help me with this because I really need this printer to work.

  Hello

  Sorry for the late reply.

  I suggest that you restart the Printer Spooler service and see if that fixes the problem.

  A print spooler is software that temporarily stores the disk printing hard or in memory until the printer is ready to print.

  Please follow the steps below:

  You must be logged on as administrator to perform the following steps:

  1. By clicking the Start button, click Control Panel, open administrative tools. In the search box, type Administrative Tools, and then click Administrative Tools.
  2. Double-click Services. If you are prompted for an administrator password or a confirmation, type the password or provide confirmation.
  3. Right click on the print spooler service, and then click Properties.
  4. Under the tab general , next to Startup type, make sure that Automatic is selected.
  5. If the service is not already running, under Service status, click Startand then click OK. If you are prompted for an administrator password or a confirmation, type the password or provide confirmation.

  For more information, please see the link below:

  http://Windows.Microsoft.com/en-us/Windows7/why-cant-I-print

  If you are still facing problems while using the printer, I suggest to uninstall the driver again and install all the optional updates offered by Windows Update and then install the printer drivers if not included in the optional updates and see if the problem persists.

  To install optional updates, follow the steps below:

  1. Press the Windows key + R
  2. Type wuapp
  3. In the left pane, click search for updates, and then wait while Windows searches the latest updates for your computer
  4. If updates are found, click on view available updates.
  5. Select the optional updates, and then click on install. If you are prompted for an administrator password or a confirmation, type the password or provide confirmation.

  Hope this helps, get back to us if you need further assistance for Windows.

• Soft scan and port of paper do not install when installing drivers for Brother MFC-665CW.

  When I try to install mfl pro suite in my daughters laptop, running windows 7 home premium, everyting installs except soft scan and port of paper.

  What should I do to install scan soft and port of paper.  It is said during the installatiom mfl pro suite is installed but I can not find anywhere on his hard drive. I tried to uninstall the drivers and then reinstall but still they do not appear in the programs, or scan paper port or mild...

  Original title: Brother MFC-665CW

  If you install from the disk of brother, all two soft scan and paperport I suspect would be part of the brother utilities/software scanning

  Is there a shortcut on the desktop brother for their utilities/software?

• Brother MFC - J5910DW wireless not recognized

  I have a Brother MFC-J5910DW and Windows 8.   Everything was working fine until yesterday when the computer does not recognize the wireless connection and I received a print error message.  I tried to uninstall the software and downloaded the most recent software drivers from the manufacturer's website.  When I temporarily connect via USB cable to configure the printer, he finds the correct SSID.  However, as soon as I unplug the USB cable, I can not continue installing wireless because the printer is no longer visible.

  Hello

  Turn your router off and leave it off for 3 minutes. -Restart after that there
  initialized restart the printer and the computer. Then try the installation again.

  Check with the support of brother.

  Brother - Support
  http://www.brother-USA.com/support/

  Brother - Download graphics driver
  http://www.brother-USA.com/LP/windows7compatibility.aspx

  I hope this helps.

  Rob Brown - Microsoft MVP<- profile="" -="" windows="" expert="" -="" consumer="" :="" bicycle=""><- mark="" twain="" said="" it="">

• Brother MFC-7820N update fails with error 80070490

  Original title: Brother MFC-7820N failed update

  Apparently, I have to use the construct in Windows 8 pilots for the Brother MFC-7820n (connected via a network). I can print fine, but cannot scan. None of the drivers of brother works for the installation of the scanner. After talking with brother, they said I should use Windows Update to get the latest drivers. I tried this several times, but the update fails with 80070490. Any ideas?

  Original title: Brother MFC-7820N failed update

  Apparently, I have to use the construct in Windows 8 pilots for the Brother MFC-7820n (connected via a network). I can print fine, but cannot scan. None of the drivers of brother works for the installation of the scanner. After talking with brother, they said I should use Windows Update to get the latest drivers. I tried this several times, but the update fails with 80070490. Any ideas?

  According to brother Tech Support, brother does not support scanning or PC to Fax printers MFC (connected Ethernet) network.  Here is a direct quote to support Brother on 24/11/12:

  «Currently we have everything planned out a complete set of MFL Pro Suite software (Control Center, send/receive PC - Fax, etc.).» Scan of the MFC
  on a network connection is not supported by the built-in support to
  Windows 8 operating system. "

• Brother MFC - J475DW 1006 printer drivers error

  Original title: Brother MFC-J475DW printer drivers

  Cannot install the CD drivers get error error installation of the DIFxDriver Package 1006

  Never use a printer installation disc to install windows drivers 8. The disks are obsolete. You get victory 8 drivers and software of brother. If there is no drivers for win 8, you can try to win 7 drivers and install in compatibility mode. If there is none of these, buy a new printer. Printers are good markets - ink is the profit machine.

• Brother MFC-L27000DW do not wake on print

  Just bought a Brother MFC-L27000DW and have problems make him wake up when printing to it.

  I have a Windows7 machine and it seems to have no problem to wake the printer to sleep deep whenever I have something down the print queue send to her. El Capitan however doesn't.

  I downloaded the latest drivers from brother and can get the printer to work if I put it off and then on again. But I can't seem to print from El Capitan by sending something to the queue printing after that he went to sleep.

  I wireless print and there is no wifi connection problem because it works very well after completing the printer.

  Update for this. After having frustrated and entertaining the idea of returning to the printer, I called brother support.

  They walked me through the process of updating the firmware on the printer and now everything works normally.

  Impression of something of El Capitan it will send to the queue printing and the printer will wake up from deep sleep and print normally.

  Everything is good.

  In case anyone want to know the details, you can press on the ' *' and ' # ' at the same time the keys on the keypad of the printer and see your firmware version. My long string of digits began with an 'H' and the latest driver from 11.1.2016 is 'J '.

• Software OCR Brother mfc j5910dw

  Hi all

  I bought an iMac in March 2015, but my Brother MFC-J5910DW will not run the OCR scan because I don't have the software installed on my iMac. I had a PC when I bought the printer about 3 years ago and have this software, but it will not work on Apple products. I called their tech support and they don't have or won't send me the OCR software for my iMac.

  Any suggestions?

  A quick search lead me to the following:

  • El Capitan Mac support information-> http://support.brother.com/g/b/faqend.aspx?c=au&lang=en&prod=mfcj5910dw_all&faqi d = faq00100205_003
  • El Capitan Mac drivers for this printer-> _all http://support.brother.com/g/b/downloadlist.aspx?c=eu_ot&lang=en&prod=mfcj5910dw & os = 10018

  You have downloaded and installed the proper software?

• Brother MFC 7820N does not work after upgrade to El Capitan

  I installed my OS to El Capitan. My multifunction Brother MFC 7820N printer was working perfectly before the upgrade. Now, I get an error message indicating that the printer is not connected, even though it is. He is unresponsive to the print command, and I can't find new compatible drivers on the Brother site. Any suggestions?

  If you haven't already done so, try to reset the printing system.

  Reset the printing system - OS X El Capitan

  You may be able to find a driver here.

  Gimp - Print

  HPIJS for Mac OS X

• install the brother mfc-5890cn

  help cannot install my brother mfc 5890

  Hello

  What version of the operating system you have installed on the computer?

  I suggest to go to the following link to download drivers and then follow the instructions to install them here.

  http://welcome.solutions.brother.com/BSC/public/us/us/en/DLF/download_top.html?reg=us&c=us&lang=en&prod=mfc5890cn_all

  Get back to us if you have any additional questions.

• I can't on my Brother MFC-9325CW printer - everything comes back as a mistake and remains in the queue

  I installed my printer Brother MFC-9325CW, and it will not be printed.  Whenever I send a document to the printer, it reads like a mistake and remains in the queue as an error.

  Most often when a device does not work, it's because the driver has been corrupted.

  Try reinstalling your.

  http://Windows.Microsoft.com/en-us/Windows7/update-a-driver-for-hardware-that-isn ' t-work correctly? SignedIn = 1

  http://captaindbg.com/how-to-update-drivers-on-Windows-7/