Browsers without taking into account the fixed font size, developing container

Similar Questions

• Problem with convert to PDF from Excel without taking into account the layout and graphics/graphics

  I work with Excel files with graphics (clipart) and charts from the data on the worksheet. I use Excel 2007 and everything a year ago and a half downloaded the option "convert to PDF" on the Microsoft website. It has been working beautifully. In Excel, I've got a) set print area b) go to "adjust to a page" print preview can convert to PDF format and everything on the PDF page looked like exactly as it did in Excel print preview. It worked flawlessly...

  UNTIL...

  .. .the most recent "upgrades" have been installed. Now the menu reads, "Save as PDF or XPS" option and the PDF is a mess. Excel text comes out OK, but any graph or Excel charts will not resize itself, and are completely out of the page. For example, a chart that is supposed to be in the lower right corner must be resized in Excel, placed in the center of the worksheet, on the text and using this approach, resize, save a PDF routine about 50 times, and you can finally wrong PDF resembling the Excel worksheet. Of course, the Excel spreadsheet is totally messed up because you have to move the chart in the spreadsheet and it's a mess, not to mention a waste of time.

  I uninstalled the Converter Microsoft PDF and XPS, and then downloaded and installed the PDF Converter (alone). No luck. It's always a mess. My business is at a standstill until I get this sorted. Help, please!

  KFG

  There is a fix for this.  It is described in a strange article entitled ' Description of the fix Excel 2007 package (Excel-x - none.msp, Graph-x - none.msp, Xlview-x - none.msp): August 25, 2009 "located here: http://support.microsoft.com/kb/973402/

  Before installing, my PDF and XPS exporting from Excel had too much size images.  Now exports are correct, just like before the Service Pack.

  Unlike article, my patch was dated 13/10/2009, rather than 19/08/2009.

  See you soon!
  BillVo

• Smart playlist without taking into account the time of power

  For many of my songs, I put options in iTunes to start at some point (start for example, eliminated song a movie after the composers finished introduce), or stop at some point (for example, end "A Day in the Life" until the inner Groove goes off).  However, when I listen to them on my iPhone, via the list of each song, I said I love you, they begin to run and play all the way to the end.  Only when I listen to the song in a different playlist, or ask Siri Shuffle it for me, these options work as it should.  Does anyone else have this problem?  My solution would not work when I want to take the first song myself at the time.

  I also have this problem and it's really annoying! I'm on an iPhone iOS running 7 10.

  It occurs in every playlist I have regardless of whether it was a smart playlist or the normal playlist I made.

  Another thing that my phone has done is when the playlist rolls that some songs will be start of subject to halfway through the song. I don't know if it's because he plays from the point at which I jumped the song the day before. I manually checked every song in my iTunes library to make sure that the box saying "remember playback position" only is unchecked (took me a while). Each box is unchecked. Ugh. I hope it's a little bug iPhone will fix as soon as possible.

• Windows 7 without taking into account the power settings

  I have a dell xps 15z running under Windows 7 64-bit, and it was just openly ignoring my power settings.  The display turns off after 5 minutes, it never sleeps, nothing.  It will stay just the way it is left until it runs the battery down.  What can I do to fix this?

  Hi soveryconfused,

  Follow these methods.

  Method 1: Run the troubleshooter of power.

  http://Windows.Microsoft.com/en-us/Windows7/open-the-power-Troubleshooter

  Method 2: Follow the steps in the article.

  http://Windows.Microsoft.com/en-us/Windows7/solutions-to-common-power-problems

  Method 3: Perform a clean boot to see if there is a conflict of software like the clean boot helps eliminate software conflicts.

  Note: After the boot minimum troubleshooting steps, follow step 7 in the link to return the computer to a Normal startupmode.

• IE is without taking into account some elements of my css, as images of bg, made weird gaps

  Here is my site, but ignore the home page, there is a slide show out there that does not work in IE or Safari: http://www.hopeedwards.com/TEST_new_website/Hope_website/assorted_art.htm
  Everything is fine in Firefox but in Internet Explorer (6) white repeat the background image in my middle tier div comes through at all on any of the pages and in the comments & Contact page there is a big gap between the NAV and the content below, and everything is pushed to the left. Yesterday, I added a few things to some div tags "display: inline" in order to stop IE doubling all margins and shoving all the tags div at the bottom of page. I don't know if it's relevant.
  
  Completely, I'd appreciate any help! I use Dreamweaver CS3 on an Intel Mac based.

  Jen_26059 wrote:
  > Here is my site, but ignore the home page, there is a slide show out there that
  > does not work in IE or Safari:
  > http://www.hopeedwards.com/TEST_new_website/Hope_website/assorted_art.htm
  > This is great in Firefox, but Internet Explorer (6) white
  > expandable background picture in my middle layer div comes about thanks to
  > about pages

  Once more good old IE is buggy. This time its something called "haslayout".

  Give your #copy

  the same width as your #container

  953px;

  Also add a nonbreaking space to your compensation

  for Mac, Firefox 1.

   

  If you add that creates havoc in any other browser, replace the

  with:

  
  

  and in the About & Contact page there is a big gap between
  > the net asset value and the content below, and everything is pushed to the left.

  I can't help you there, the code is so messy, it would take a month of
  Sunday to sort.

  For one, you have twotags in the page that will not help.

  I re - run the page and test step by step.

  Yesterday, I
  > added some things to some div tags "display: inline" in order to stop IE from
  > doubling all margins and pushing all the way divs to the bottom of the page. I don't know if
  > It's relevant.

  This isn't.

• Why is the fixed font size in Windows Mail (Vista) after installing IE9?

  I use Vista.  When I installed IE9, I discovered that the font size in any of my messages of e-mail in the Mail window is fixed.  I can't even use a bold font.  Why is this, and is there anything done to correct the problem?

  This problem is solved with the last update for IE9.  See http://www.oehelp.com/OETips.aspx#15

  Steve

• My paintings in CS4 do not take into account the fixed width!

  I try to make a fixed width of 700px, and I put it but when I put text inside keeps and goes to the right, and you have to scroll to the right, of course I need it to go any furthur 700px then drop to the next line.

  Anything I'm doing wrong?

  A long string of text without spaces * will * do exactly what you describe.

  Try to put a space in the text that you enter and see what happens.

  A table cell will be expanded to fit whatever content is that it contains.  If you have a table set to 700px by example and place an image inside the cell to 710px, it will expand on this table, regardless of the defined width.

  PS: I got the response window open and there aren't all the answers at this time, I went to another site for a bit, and when I came back posted my reply, saw that bergent had already answered as well :-)

• programs not responding, freezing, office does not properly taking into account the temporary office.

  When I start my computer, I get the Welcome screen and then my office takes over thereafter, is not loaded correctly, and I get temporary.  I have to restart. Virtually every day, windows mail opens then freezes, I get a program does not almost any time.    I do analysis antivirus regularly, clean and defragment.    can someone please tell me what to do with it.

  Read the info below:http://support.microsoft.com/kb/947242

  A temporary profile is loaded after you connect to a Windows Vista-based system

  ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

  http://windowshelp.Microsoft.com/Windows/en-AU/help/769495bf-035C-4764-A538-c9b05c22001e1033.mspx

  Difficulty of a corrupted user profile

  After creating the profile, you can copy the files from the existing profile. You must have at least three user accounts on the computer to perform these operations, including the new account that you created.

  See you soon.

  Mick Murphy - Microsoft partner

• Why is relativeInitalX value not taking into account the triggering delay? using scope OR with the PXI-5124

  Hi all

  play with a digitizer PXI-5124 in a case of PXI1042Q with a PXI8110 controller that runs labview 2012 (latest updates) with the latest version of the driver NIScope.

  I put in place an acquisition of off-delay (by assigning the triggering delay, for example 20us) which works very well (I can tell by the signal I get delay control works correctly), but the data returned in the info wfm cluster (using the 2D version of niScope I16 Fetch) does not have this delay.

  Description of the relativeInitialX within this cluster indicator indicates "is the time in seconds between the trigger and the first sample in the acquired waveform" but its never to return something around 1E-9 independent of trigger delay. Surely the relative initial x should reflect the triggering delay?

  I'm doing something wrong?

  Thanks for your help!

  So, I made a screenshot of the image in the section "Trigger Delay" link I sent you.

  

  Meaning of the symbol:

  T0 = original moment of relaxation

  T1 = time to trigger used in the acquired record (t1 = t0 + TriggerDelay)

  T2 = time of first sample in the record of the acquis.

  RX = relativeInitialX = t1 - t2

  Response to previous reviews

  «I understand what you're saying - so basically, if I want to know the delay of my trigger for the first sample in the record, I just add my delay time value to the relativeInitialX.»

  • Close, the delay of the original trigger (t0), for the first sample in the record (t2), would actually be TriggerDelay-relativeInitialX

  «.. . Nowhere does graphically describe where is the relative value of initialX real. »

  • Right, relativeInitialX is not a timestamp, so it is not a place on the timeline, it is the difference between two timestamps (t1 and t2 above), where the relativeInitialX name.

   

  "The trigger"record"is the straight line in the Middle, so expect relative to - 1/2 initialX record length?

  • Almost correct, because the reference trigger is relativeInitialX to the position of 50%, will be the time in seconds for 1/2 the record length. (i.e. If the registration has been long relativeInitialX, 2s = 1 s).  RelativeInitialX will always be the delta time between the trigger (t1) and the first sample returned in the record (t2).
  
  
  • For example using the picture above: If t0 is 10 sec, Trigger Delay = 3 sec, SampleRate = 1 kHz, = 1000 record size.  This means that t1 = 13 s.  Our record is long of 1s (1000 points to 1 DC between each = 1 s), if t2 = 12.5 sec.  If away from all these moments are absolute time, as the timestamps.  So relativeInitialX = t1 - t2 is 13-12, 5 = 0.5 sec.
  
  
  • As a side note, the reference position should not be 50%, you can configure to between 0-100%.

  Time not yet discussed record attributes

  I don't want to make you more confused, but there is another useful attribute in the waveform info that we've not yet discussed and its AbsoluteInitialX.  Starting from the NOR-SCOPE help file:"absoluteInitialX is the timestamp of the first sample of recoveries in seconds..." "So, using the above image, absoluteInitialX = t2.

  I hope this helps.  If a part is still not clear, let me know.

  -Nathan

• Calculation of available time after taking into account "outages".

  I have two tables, travel and failures. The shift table contains one record per person (identified by an ID unique person) by date and a time field start time and end. The failures table contains documents showing when someone is unavailable and has a start date/time and end date/time.
  
  What I need to do, is to create a view that returns one line per record shift, showing their hours available taking into account failures which cover this change. A failure may extend over several days, or there could be multiple failures within a single day. For example, if there is a power failure for a person from 12/01/2009-08:00 (DD/MM/YYYY HH24) and ends at 2009-02-12 10:00 and the movement of people both at the time is 08:00 - 16:00, it should return zero hour availability for 2009-01-12 and the availability of 6 hours for 2009-02-12. Similarly, assuming the same displacement from 08:00-16:00, a shift with 2 failures from 08:00 - 10:00 and 15:00 - 16:00 must return the availability of 5 hours. Failures for one person may not overlap.
  
  Any ideas on how to go about it?

  Hello

  Welcome to the forum!

  Not counting failures, the total duration (in days) is end_time less start_time, assuming that these columns are DATEs.
  Subtract the total time when outages overlap shift multiply by 24 to change the units from days to hours.
  One way to do that is:

  SELECT     s.*     -- or whatever columns you want
  ,     24 * ( (end_time - start_time)
            - NVL ( ( SELECT  SUM  ( LEAST    (end_time,   s.end_time)
                          - GREATEST (start_time, s.start_time)
                          )
                   FROM    outage
                   WHERE   person_id  = s.person_id
                   AND     start_time < s.end_time
                   AND     end_time   > s.start_time
                 )
               , 0
               )
            )     AS hours_available
  FROM     shift     s
  ;
  

  Maybe it's not obvious why the conditions

  ...                 AND     start_time < s.end_time
                   AND     end_time   > s.start_time
  

  say if failure overlaps with shift.
  Look at it this way: in which case failure to NOT overlap? They do not overlap when either
  (a) the breakdown begins after the end of the SHIFT (i.e. start_time > s.end_time), or
  (b) the failure ends before the start of the transition (i.e. end_time<>
  The conditions of the query are the negation of these two conditions.

  It would be in reality a little more correct to say that failure and shift overlap when

  ...                 AND     start_time <= s.end_time
                   AND     end_time   >= s.start_time
  

  which would include cases where you start at the exact moment the other ends. Given that the total duration of such an overlap is 0, I left these cases limits out of the query.

  This requires that start_time<= end_time="" in="" all="">
  I made a few other assumptions, too. If I have something wrong, or if you need assistance for any reason, after the informatipn as mentioned centinul.

  Published by: Frank Kulash, November 1, 2009 19:23

• 2d line, numbers and dates. How to take into account the date value when drawing a 2d line?

  Hello. I just encountered a problem when tracing a line 2d with numbers.

  I have the following table:

  Date	Total
  2015 12-31	R $150 000,00
  2016 03-19	R $159 000,00
  2016-03-25	R$ 166,090.00
  2016-04-01	R$ 159,250.90
  2016 04-10	R$ 165,343.41

  But when I create a 2d line chart it does take into account the fact that the 1st line is in December. Numbers do not fit the distance between the data symbols according to the date, but instead just consider the dates like any other label. Which causes the curve final not not to be specific

  

  Is it possible to make account numbers of dates when tracing of graphics?

  If you don't want the dates to be spaced when you do not have uniform intervals so you can use a cloud of points in 2D instead of a 2D line and turn on the connection line, something like this:

  

  Note that with the Scatter 2D (unlike with 2D line) you do not want to be defined as a column header in the left column.

  SG

• How can I set the default font size and type for the outgoing Hotmail mail?

  How can I set the default font size and type for the outgoing Hotmail mail?

  Hi Dale,

  What is the email client do you use?

  Outlook can be configured per - start Outlook-> Tools-> Options-> mail-> fixed Format and fonts... Select the font and size you need... Click ok on all screens.

  I hope this helps.

• Is it still possible to change all the global font sizes in thunderbird?

  I saw there are several posts on the base font size in thunderbird, but have you actually solved this yet please?

  Good to hear everything is ok.

• How do you define the default font size and color for the text caption and text boxes?

  When I click CTR + e to open the text properties box when you are working with markup tools, the default font size is 9.

  I understand how to change the font size for the individual text boxes but the size is up to 9 whenever I create a new box.

  Is there a way to set a default font for brand boxes place size? I spent hours searching and have not found one.

  This problem appeared only with the latest version of Acrobat Reader DC (15.017.20050).

  Any help would be greatly appreciated.

  Thank you

  Andrew

  Hello

  We have released an update today that solves the problem to "default properties" and parameters are now sticky. Please open Acrobat or Reader DC and visit help > check for updates to ensure that you are on the latest patch.

  Details on the release: https://helpx.adobe.com/acrobat/release-note/acrobat-dc-august-02-2016.html

  Please let us know how it goes.

  Thank you

  -ashu

• Phtoshop CC 2014 / the Incease of the GUI font size?

  Hello!

  Looks like that the font size is smaller in Photoshop CC 2014 in CC of Photoshop.

  I have a DELL U2713H with 2560 x 1400 pixels.

  But even if I my glass door (which was not required by using the previous version of Photoshop) the font size is a bit small and not easy to read.

  I tried the experimenter function to increase graphic interface elements ALL 200%, but the result is funny, but not useful in my case ;-)

  So I wonder, if there is no chance to increase the font size of the GUI is readable again.

  Concerning

  There are two sizes of separate policies:

  1. the menus

  2 about everything

  The font size of the menu is now the same as what you would have seen with Windows desktop 100% implemented nationally before the value.  The only font size is now the effects of setting in Preferences - experimental features Panel (as you saw), and may not be 100% or 200%.

  The rest of the fonts in Photoshop can be affected by the Preferences - Panel interface , setting the font size of the user interface.  The beach is not great, and you will need to close and restart Photoshop to see the change.

  I hope this helps!

  -Christmas