brush with negative spacing model?
I am trying to create a model brush where the model elements overlap eachother, so I tried to set the spacing of the brush to 5%, but I don't. Why not? is there a work around to get there?
Thank you
Well you can do overlap models very easily. Create a contour unfilles rectangle that marks the area where you want to attach tiles. Move it to the back and create the tile. See an example of a rectangle here:
Tags: Illustrator
Similar Questions
-
I followed this tutorial to create Christmas lights 3D, and all was going well until I reached one of the final steps-release clipping mask in order to proceed to make a brush model. The option of "Libération" is simply not available, I am only allowed to 'Make '.
My questions:
-What could I have lack/what do I look for to make a brush model with 3d objects?
Is there a better approach?
Thank you!
There is not far from here. This is the bulb before the stage to break down the appearance
This is after decaying appearance.
Note the clipping paths
This is after the object > clipping path > Release
Now that the clipping masks are gone and it will be a model brush
-
Would a macbook pro model A1278 case be compatible with macbook pro model A1502 case?
Would a macbook pro model A1278 case be compatible with macbook pro model A1502 case?
# Ports are different.
-
Motherboard for Satellite A200-1CR integrates with other A200 models?
HY guys...
I have a toshiba Satellite A200-1cr model, with a motherboard model k000051290 that no longer works...
If I have to buy another...The problem is that I can't find another with the same model, at a decent price... because... 400 euros for a new Mo...
I better buy another laptop...Then... I found a MB TOSHIBA SAT A200 A205 Motherboard ISKAE LA34 CONDOM, model K000054260, refurbished... from $ 150 on Ebay...
Now, I ask you...
I saw the picture with this MB and it is the same with my MB... now... will I have problems with my laptop if I buy this MB?
What do you recommend?Hello
In my opinion, the Board Member should be ok. It must correspond with you model Satellite A200.
The measure of the motherboard is the same.See you soon
-
I replace my airport express with the new model. Flashing orange. It works, but cannot configure security. Tried to reset via the reset button. Tried unplugging and tried unplugging the modem. I would like to fix.
Modem... doing and... model number you have?
What operating system do you use on your Mac, or you are using an iPhone or iPad set things up... or a PC?
-
Image Matching with Labview or model
Hi all!
I am currently implementing a picture matching algorithm on two .png images (let's call them model and Photo).
The idea is that the template contains an examply of which must be shown in a certain part of the picture.
Model and photography have sizes of different images.
What we want to achieve is:
1 find the return on investment in the Photo where the model is likely to be found
2. compare the KING with the real model
3. get a percentage of similarity (e.g. 90% similar-> specific Match, 70 to 89 %-> accordingly Match Possible, <70%similar -="">not a match)
Do you have ideas on how we might put implement this?
We currently use LABView 2015 SP1 - 32 bit with the add-on of the Vision
We had to use a modified version of the model Inspection.vi Golden (can be found) but are blocked because the IMAQ compare continues Golden Template Module return the error message attached to this post.
Any comment on the possible debug is also welcome!
Thank you!
A model is *.png with info vision (for example, settings, info, etc.). You must create the model using model editor which should be installed and accessible from the start menu.
70%similar> -
String to the Array.vi worksheet with negative numbers
I was exploring a program posted on the developer zone titled "ClipboardtoNumericArray.vi" and noticed that it substitute 0 for elements with negative numbers. The 'String to Array.vi worksheet"working with negative numbers? If so, how?
The problem is that your negative sign is not a negative sign. This is the code ASCII 150. I'll call it something like a "long dash", that's why it does not recognize the LabVIEW code. A negative real sign you have in part E-6 is code ASCII 45. And also why same Excel treats as text rather than a number.
Where did you get the CSV file from?
-
Hello world. I need to trace the variable amplitudes compared to the timestamp (date and time), but the time intervals between samples are not equidistant. In my area, this is called trend plot. I'm surprised that Labview does not a vi to do this. The only solution that I found so far is to save the data in an Excel file and open this chart in Excel because it has the ability to trace what that this is against what whatsoever is not limited to something as even spaced samples. How to achieve this is Labview? A graph of waveform vi would be perfect if it was not by the fact that it works with even spaced samples.
Thank you.
Paulo Siqueira
Your requirement is directly possible with LabVIEW.
You can spend time to understand the difference between 'Chart', 'Graph' and "Graph XY".
VI attached is drawing samples of unequal time.
Hint:-right click on the 'XY' graph-> properties-> display-> 'Axis of X' = absolute time Format
Kind regards
Yogesh Redemptor
-
I want to replace my old officejet pro L7780 with a new model, which is a comparable HP model today?
Hello
You can check the HP Officejet Pro 8620 as example, it is a product of the same level:
You can check the HP site for the HP Officejet Pro series printers, more as wel as some HP Officejet printers.
Kind regards
Shlomi
-
The REFLEX of the A65 was abandoned and if so it will replace it with a similar model soon?
At Sony disconitnued DSLR A65 and if so it will replace with a similar model (price & features) in the near future?
Good day Justin,.
The camera Alpha SLT - A65 was interrupted and the moment, we cannot speculate if a new model is under development which will have similar functionality and price. You will visit our Web Store from Sony site and sign up for a newsletter on the subject of Alpha cameras.
If my post answered your question, please mark it as "accept as a Solution.
-
Problems with line spacing - not able to adapt
Having some problems with line spacing - I work in a file that I've not been created. The phenomenon that occurs is as follows: I have a block of text, when I increase or decrease the foreground one point at a time, nothing happens. As I continue to increase, the line of text will suddenly blow up about a quarter of an inch.
For example, I 8.5pt type whose main value to auto (10.2) - I hit increases by increments of 1 point, the line does not, only when I get to 13pt we must answer and bumps up to about 1/4 in. I continue to increase by increments of 1 point 13, and line does not respond until I reach 25pt, how the line of bumps down on another 1/4 of an inch.
This could be the cause?
It's not downtown... The text is printed to line up on the starting grid.
-
Width sensitive not available with uniform spacing in the menu?
A sensible width menu is not available with uniform spacing? I have a few pages with short and long name then, some need uniform spacing. When I check this option if I seem to lose the ability to have a responsive menu width. In fact I don't seem to have any option resize at all when this option is selected. My only choice is to set breakpoints and resize my type?
Yes, this is not yet implemented.
-
When I use my brush tool, it works very well unless I overlap the brush with another brush stroke. When this happens, it turns bright red. How can I fix this and put it on the default setting?
Your brush is set to Hard Mix in the options bar. Change this to normal and everything will be fine.
-
Difficult to change the sizes of brush with keyboard commands
Hi all
All of a sudden I have problems change of brush sizes, hardness etc. using keyboard shortcuts. Additionally, when you try to use a brush with a taper on it (which I would like to get rid of), he refuses to go. Sometimes I can use keyboard controls and all that after I chose another tool and back brushes (or dodge or burn), say brush, click on the arrow icon, then back to the brush and use the keyboard command, or click on the program and back in.
It is not Yosemite, it started before that, but don't know when.
I'm on an iMac running Yosemite 10.10
Thank you
Could it be! Menus, shortcuts, Lasso tool, or Photoshop constantly run when using a Wacom tablet. Mac OS
Adobe has a white window plugin to solve this problem.
Gene
-
Error tool brush with layer masks
I've identified a bug in layer mask in Photoshop for Mac 14.2.1. When you work with no vector layer masks, the Brush tool will not paint one value darker than the white level in the mask. For example:
When a layer mask is created from the icon at the bottom of the layers window, the mask itself is white, representing a total visibility of the hidden layer. If you try to use the brush with 100% black (for in fact hide something in the layer there is), it does not work. I am able to use the bucket tool paint and pencil to fill in black mask tool, but not the Brush tool. If the mask is 67% gray, and my brush tool is set to 66% gray, it does not yet affect mask; White level cannot be decreased, not increased with the Brush tool. Bug!
Your brush, blending mode is set to Normal?
Maybe you are looking for
-
You * thieves g, I can't delete my xbox credit card! Give back me my card! * I don't want to pay!
-
WMP11 Sync - articles removed from the device
I'm having a problem with Windows Media Player 11 attempt to synchronize files on my MP3... after that I have sync a song I want, Windows Media Player deletes 25 other songs that I've previously synchronized before synchronizing this song... and thes
-
How to fix the user admin corrupted in Windows 7 profile
I have only a single user profile with administrator privileges. I can't connect to it, I got the msg «user profile cannot be opened...» ». I can boot into safe of all Modes. After reading a few messages of support online, I started in safe mo
-
NVIDIA Quadro FX 380 precision 7500 con problemi
Salve, ho una workstation Precision 7500 e, mentre stavo lavorando, enjoyed the screen ha begun a produrre schermate illeggibili TR e spento del tutto poi. Ho tried one my riavviare PC it solo tanto by vedere che partiva in terms have ('blue screen'
-
Anyone know why I can't buy the Portugal LR6? When I select the desktop application of most place hiden in the site Web of the page turns out to be empty! In other regions that is not the case but since I am connected to the Portugal, I'm not able to