BSOD need assistance, I write the DMP file

Similar Questions

• Compaq Presario SR2177 BSOD Win 7 - help analyze the .dmp file.

  New installation of Win 7 Home Premium, Compaq Presario SR2177CL.

  AMD X 2 3800 + 2 GHz Dual-Core CPU

  1 GB of DDR2 Ram (2 x 512)

  HDD Sata 200 GB WD

  After a clean, led installation to all updates MS blue screens started.

  MemTest 86 +: pass

  HARD drive test: pass

  Last crash dump file is here:

  https://SkyDrive.live.com/?CID=e714ffc82e58b1a6#CID=E714FFC82E58B1A6&ID=E714FFC82E58B1A6%21174

  As noted, this is a clean install, online only for MS. updates I tried to parse the file .dmp myself, but certainly need some help here.

  Power supply tested ok without ceiling blown on the Council, the onboard video, the lan & sound. No cards installed.

  Blue screen appears almost immediately once the initialization is complete.

  Thanks in advance for any suggestions.

  PDI

  Stop 0 x 124 is a hardware error
  If you are overclocking try to reset your settings to standard processor and see if that helps.
  If you keep getting the BSOD here are things more than you may want.
  This is usually hardware related, defective heat, memory or processor even if it is "possible" he is associated (rare) driver.
  
  Stop 0 x 124 - what it means and what to try
  Synopsis:

  A "stop 0 x 124" is fundamentally different from many other types of bluescreens because it arises from a complaint of material.
  Stop 0 x 124 minidumps contain very little concrete information, and it is therefore necessary to address the problem as a case of material in an unknown state of distress.

  Generic troubleshooting ' Stop 0 x 124 ":

  1) to ensure that none of the hardware components are overclocked. Material which is pushed beyond its design specifications - by overclocking - may malfunction in unpredictable ways.

  (2) ensure that the machine is sufficiently cooled.
  If there is doubt, open the side of the case (be aware of all the relevant conditions guaranteed!) PC and direct an electric fan squarely to the motherboard. Who will rule on most cooling problems (lack of).

  3) update all drivers related to materials: video, sound, RAID (if applicable), NIC... anything that interacts with a piece of hardware.
  It is best to run the latest drivers anyway.

  (4) update the BIOS of your motherboard according to the manufacturer's instructions.
  Their website should provide detailed instructions on the brand and model-specific procedure.

  (5) rarely, bugs in the operating system may cause "false positives" 0 x 124 events where the hardware wasn't complaining, but Windows thought otherwise (because of the bug).
  At the time of writing, Windows 7 does not have to suffer from a defect, but it is nevertheless important to keep Windows up-to-date.

  6) trying (stress) test these hardware components that can be put to the test artificially.
  The most obvious examples are the RAM and HDD (s).
  For the RAM, use diagnostics from built-in memory (run MDSCHED) or the utility memtest86 3rd - party to run plenty of evidence of hours of testing.
  For hard drives, verify if CHKDSK /R finds any problems on (s), including "bad sectors".
  Unreliable RAM, in particular, is mortal, as well as software, and anything other than a 100% clear memory test result is cause for concern. Unfortunately, even a 100% clear result the diagnostic utilities does not guarantee that the RAM is free of any defect - only that none have been encountered during the test passes.

  7) as the last of the non-invasive troubleshooting steps, perform a "Vanilla" Windows reinstallation: just the OS itself without additional applications, games, utilities, updates, new drivers - or ANYTHING that does not come from the Windows 7 disc.
  Who stops working mitigate the problem of the 0 x 124, jump to the next step.

  
  If you run the "Vanilla" installation long enough to convince yourself that not a single 0 x 124 accident occurred, start installing applications and updates slowly, always stopping between successive additions long enough to get an idea of the question if the machine is still free of 0 x 124 breaks down.
  Smash back, obviously the latest addition of software may be somehow connected to the root cause.
  If the stop error 0 x 124 persist despite the above steps, and the equipment is under warranty, consider to go back and ask for a replacement that does not suffer periodic MCE events.
  Be aware that want to perform the subsequent hardware troubleshooting steps can, in some cases, void your warranty:

  (8) clean and carefully remove the dust inside the machine.
  Reinstall all memory modules and connectors.
  Use a can of compressed air to clean the RAM DIMM supports as much as possible.

  (9) If all else fails, start removing items of hardware one by one in the hope that the culprit is something non-essential that can be eliminated.
  Obviously, this type of testing is much easier if you have access to equivalent components in order to perform swaps.

  If you are in the situation to have completed all the steps above without a resolution of the symptom, unfortunately the most likely reason is that the error message is literally correct - something is fundamentally wrong with the hardware of the machine.

• a disk error has occurred while trying to write the following file

  I was working on my video and I put in a video file and a 10 seconds later, I get an error saying "a disk error occurred while trying to write the following file.

  and audio of the video was not working I close Premiere Pro and open again to do the same thing and it happens again if you know how to fix this please tell me I need to change my video so I can get it to the top on youtube tomorrow.

  I contacted support and it turns off everything, I had to do was move the first clip on the desktop... lol Thanks much for the great help! Sorry for the trouble

• How to write the text file in Shockwave?

  Someone knows how to write the text file in Shockwave on the disc of the user?
  
  Thanks in advance.

  These Xtras can cause a lot of havoc when used with the intent to hurt.
  What you can do is to write with setpref and store a list of backups and the
  registers itself separately. Next, you need to build your own save/open
  dialog box for the user:
  * Choose a previously saved file to load or replace
  to create a user type the name of a new file to be saved.

  The only thing that remains is that the user can't decide where files
  are saved.

  Manno

  SiuLinda wrote:
  > Thanks a lot for your answer.
  > Yes, cookies is good, but I have to write a program to save the text file in
  > When the user wants, the user can open these files later if they like as, using
  > Filextra and Fileio, but I found that all these Xtra extensions seem to be not supported by
  > shockwave.
  >

  --
  ----------
  Manno Bult
  [email protected]

• error: could not write the destination file (1 003)

  I am trying to export 40 photos of Photos.  I just installed OX El Capitan.  Only 13 of them get downloadable.  For the rest, I get this message: error: could not write the destination file (1 003)

  I tried to manually fix the library but still does not work (command + option + opening photos).

  And I do not have a backup on icloud photo library I have a backup on an external drive...

  You try to export the originals of your photos or revised versions?

  When you try to export photos to?

  You try to export to a folder on your system drive or a folder on an external drive?  If an external drive, which is the file system? And how the player is connected?

  You have permissions to write to the folder, when you export to?

• Planning an application in the DMP file

  Hello gurus,
  I was wondering how we could use the DMP files to create the planning application (recreate).
  I have a little. DMP files, but I don't know how to use them or copy them to create the planning application not too.
  A suggestion would be great.
  Thank you

  Yes, that will drop the user, you can create the user and he assign roles again and import the dmp.

  See you soon

  John
  http://John-Goodwin.blogspot.com/

• Tool to manage data in the DMP file

  Friends,
  
  We currently have this process:
  
  -Export production data using expdp
  -gzip .dmp file and move it via ftp to test servers
  -import data on the test servers
  
  We are trying to create a process where we can remove all the "sensitive data" test, because our data is highly confidential.
  So, we have already designed a procedure that can remove these data after the import.
  
  BUT my question is: there is some King of oracle tool which can allow us to modify the data in the dmp file, even before you start the import operation?
  
  
  Approx. (Test and Production): Oracle 10 g 2 running under Linux
  
  Thank you

  You can protect your sensitive data after importation in the test environment using datamasking grid control functions.

  Another solution, I've used sometimes is create the trigger for insertion in the test environment a sensitive but important data change is slower.

  HTH
  Antonio NAVARRO

• Change the dmp file

  Hello...
  
  I have a dmp of production environment database, I want to import into a development environment but the initial values for the creation of objects is too big, I mean the size of the tables is very big and I don't have space in environment to develop to import the structure only without data.
  
  What can I do?
  
  It is possible to edit the dmp file to change these values?
  
  Thank you.
  
  PD: Sorry for my English, hope you undestand me :)

  In this case, I think you can edit the sql file (generated from the 'imp indexfile' command), according to the storage in the new environment.

• Need assistance to integrate the separate in a PDF files

  All,

  I use Adobe Acrobat X Pro (Version 10.1.2).  I followed the instructions below to try to embed Word, Excel, PowerPoint files and PDF separated in my PDF document as thumbnails, but the only problem is, this works on my computer because the files are saved on my computer.  As soon as I move my PDF file that contains links, the links are not open.

  How can I essentially do the same thing but have the miniature links be viewable by all, regardless of their location?

  Create a link using the link tool

  1. Choose Tools > content > link. The pointer becomes a cross, and all existing links in the document, including invisible links, are temporarily visible.
  2. Drag a rectangle where you want to create a link. It is the area in which the link is active.
  3. In the dialog box to create a link, choose the options you want for the appearance of the link.
  4. Select one of the following link:

     Go to a Page view

     Click next to set the page number and magnification of the view you want in the current document or in another document (e.g. an attachment) and then click on connect.

     Open a file

     Select the destination file and click Select. If the file is a PDF file, specify how the document should open (for example in a new window or in an existing window), and then click OK.

     Note: If the file name is too long to fit in the text box, in the middle of the name is truncated.

  Open a Web Page

  Provide the URL of the destination web page.

  Personal link

  Click next to open the connections properties dialog box. In this dialog box, you can set any action, such as reading an article, or run a command menu, to associate with the link.

  There is no MS Office as "embed" with PDF (see standard ISO 32000 - 1).

  [(pas dans kansas---8 ^)]

  Supported files formats can be "attached" to the PDF format.

  Be well...

• Is it safe to delete the .dmp files in the program directory?

  I found a big enough .dmp file in my Firefox installation directory:
  c:\Program Files (x 86) \Mozilla Firefox\core.20130617.XXXXXX.XXXXX.XXXX.dmp
  It seems that the main file is labeled with a date stamp; the "X" are other digital numbers by hiding I am those out because I'm not sure they're relevant. Is it safe to remove this? Note that this file does not appear in topic: down.

  Delete it and restart the computer, make sure that firefox is not open as windows usually makes those when you get BSOD.

• write the measurement file

  Hi all

  In fact, I'm writing a file of measures. I'll have a waveform from the oscilloscope and I want to record it after every 15 seconds.

  In the attached VI, I simulated signals (the driver that I use for data acquisition also got the while loop) and performed an analysis on it. As shown in the attached screenshot, I use the write action 1 file to connect the data as soon as starts the acquisition and then I use writing as filemarked 2 to get the data after every 15 seconds.

  I thought that this arrangement should work, but it does not work

  Could you please guide me in this regard? I want to write data to a file of measure for every 15 seconds.

  Looking forward to your response.

  Best regards

  Hernu

  The use of the timed loop is unjustified at all, IMHO. Simply place a time elapsed in the main loop function and it wire to an instruction box with the writing inside function. Or use an architecture of consumers/producers (file > open...).

  The way you wrote that the displayed example shows that you don't understand really LabVIEW and data flow. Always take the tutorials. ?

• need help on deleting the recent files in photoshop on Mac.

  When you start up of photoshop and your in the start screen where it shows all your files, how to remove the file from this screen. I can remove them from my finder section where it shows all the documents and files and downloads, but it will not remove them from the recent files in photoshop. I need to clean my files please help.need

  Hi charlienelson,

  Please follow the steps below.

  > Launch Photoshop

  > Click on file > open recent > clear recent files list

  > Restart Photoshop and check for the issue.

  Let me know if it helps.

  ~ UL

• Need help to read the xml file and place it in a table.

  Nice day!
  
  Here is the configuration. I have a xml file from another source which will call a stored procedure in my database (which I am supposed to create). This is a first for me, I've never done development pl/sql or worked with xml. :(
  
  That's what I hoped to accomplish, if there is a better way, that I am open to him.
  In short, to have a stored procedure that takes the xml file (transmitted by third parties via the call, no url must be a file), creates a temporary table and populates the two columns needed. Then, the SP will make a select join with the temporary table and other data available in another schema. Once the completed table selection will be truncated and dropped. SP farm.
  
  Details:
  DB: Oracle 11.2.0.1 RAC.
  Charset: AL32UTF8
  Example of XML: (nearly 10,000 lines like this in production)
  "< MerchantID report =" "#" name = 'Conversion detail report' ReportStartDate = '2011-09-27 12:00:00GMT' ReportEndDate = '2011-09-27 21:38:13GMT"Version ="1.1"> < Conversion = '1234567891234567 D' MerchantReferenceNumber Convertingdate =" 2011-09-27 13:39:02 "RequestID ="1234567891234567891234"> < OriginalDecision > REVIEW < / OriginalDecision > < NewDecision > ACCEPT < / NewDecision > < Reviewer > testusr < / examiner > < ReviewerComments > no reason to reject. < / ReviewerComments > < Notes > < Note Date = "2011-09-27 13:39:02" AddedBy = "testusr" comment = "Took possession" / > < / Notes > < queue > Digital Review < / queue > < profile > Digital orders QA < / profile > < / Conversion > "
  ...
  < / report >
  
  What I tried.
  I found a tutorial: http://it.toolbox.com/blogs/oracle-guide/oracle-and-xml-in-action-a-real-world-example-5319 I tried and was able to make it work. But I could not duplicate the results with my xml file. So I looked away and have had no success. :( I'm not a developer, so I'm really bad...
  
  I found a note of support: (how to load an XML file into a Database Table using DBMS_XMLSave unaided Bfile [227476.1 ID]) and couldn't make it work.
  
  I found some online then Odie son xml and tried these but slipped and couldn't get my versions of these great answers to work for me.
  
  Then... I'm here now and hoping that someone could walk me through this.
  
  
  I tinkered this SP (it doesn't have to be that way, the suggestions are greatly appreciated)
  
  create or replace procedure xml_to_table (call_1 call_2) as
  
  Start
  run immediately "CREATE GLOBAL TEMPORARY TABLE XMLType IMRPT
  --(clé primaire contrainte-imrpt_pk (MerchantReferenceNumber))
  XmlType store as xml binary basicfile
  -(high compression)
  virtual columns
  (MerchantReferenceNumber as (xmlcast (xmlquery ('/ Conversion/MerchantReferenceNumber ' from object_value content back) as VARCHAR2 (32))))
  , NewDecision as (xmlcast (xmlquery ('/ Conversion/NewDecision ' from object_value content back) as VARCHAR2 (10)))
  )
  -ON COMMIT PRESERVE ROWS
  
  run immediately 'save xml as a file on the local system?'
  
  insert into IMRPT (MerchantReferenceNumber, NewDecision)
  
  run immediately "join select statement.
  run immediately 'truncate table IMRPT.
  run immediately "drop table IMRTP.
  
  end;
  /
  
  On my last test, I tried to select just in the xml file using this:
  
  DECLARE
  indomdoc DBMS_XMLDOM. DOMDocument;
  innode DBMS_XMLDOM. DOMNode;
  myParser DBMS_XMLPARSER.parser;
  buf VARCHAR2 (2000);
  BEGIN
  myParser: = DBMS_XMLPARSER.newParser;
  
  DBMS_XMLPARSER.setBaseDir (myparser, 'XML_DIR');
  DBMS_XMLPARSER. Parse (myParser, "test.xml");
  
  indomdoc: = DBMS_XMLPARSER.getDocument (myParser);
  
  -just to test content
  innode: = DBMS_XMLDOM.makeNode (indomdoc);
  DBMS_XMLDOM.writeToBuffer (innode, buf);
  Dbms_output.put_line (BUF);
  
  dbms_xmldom.freeDocument (indomdoc);
  dbms_xmlparser.freeParser (myParser);
  END;
  /
  
  It was another accident and burn.
  
  Any help would be appreciated.
  
  Thank you

  Like I said:

  Here is an example using a REF CURSOR variable ( you will need to declare a plus for your actual procedure )

  Your procedure has two parameters, you must declare two variables to hold the two REF CURSOR ;)

  DECLARE
  
    v_filename      VARCHAR2(50) := 'DMReport.xml';
    v_rc1            SYS_REFCURSOR;
    v_rc2            SYS_REFCURSOR;
  
    v_order_name       VARCHAR2(100);
    v_reason_text      VARCHAR2(100);
  
  BEGIN
  
    xml2table(v_filename, v_rc1, v_rc2);
  
    commit;
  
    loop
      fetch v_rc1 into v_order_name;
      exit when v_rc1%notfound;
      dbms_output.put_line('ORDER_NAME='||v_order_name);
    end loop;
  
    close v_rc1;
  
    loop
      fetch v_rc2 into v_order_name, v_reason_text;
      exit when v_rc2%notfound;
      dbms_output.put_line('ORDER_NAME='||v_order_name||', REASON_TEXT='||v_reason_text);
    end loop;
  
    close v_rc2;
  
  END;
  /
  

  If you test this in SQL * Plus, do not forget to SET SERVEROUTPUT ON to see the result.

• Publish the .dmp file importing

  Hi all
  
  I have problems to import a recently exported schema (.dmp file). Here is the exp, imp utility version numbers and the database.
  
  Version numbers
  Exp: 9.2.0.1
  IMP: 9.2.0.1
  Database: 10.2.0.3
  
  Import process hangs. The V$ SESSION_WAIT view indicates that the process is pending (see V$ SESSION_WAIT results below).
  Therefore, I killed the process, allowed tracing "ALTER SYSTEM SET SQL_TRACE = TRUE", re-directed the import and down TKPROF. The output seems to give no indication of why the process imp is waiting. Anyone has any suggestions/ideas as to what's causing this problem or how fix?
  
  __V$ SESSION_WAIT__
  SID: 125
  SEQ: #135
  EVENT: SQL * Net more data from client
  P1TEXT: driver id
  P1: 1413697536
  P1: RAW0000000054435000
  P2TEXT: #bytes
  P2: 1
  P2: RAW0000000000000001
  P3TEXT: P30P3RAW00
  WAIT_CLASS_ID: 2000153315
  WAIT_CLASS: #7
  WAIT_CLASS: network
  WAIT_TIME: 0
  SECONDS_IN_WAIT: 1084
  STATUS: PENDING
  
  Import Parfile
  FILE = file1.dmp
  JOURNAL = file1.log
  FULL = Y
  GRANTS = N
  IGNORE = Y
  INDEX = N

  When you import the dump file, you must use the same version of the utility imp as a base. If your database 10.2.0.3 you use 10.2.0.3 imp version 9.2.0.1 not

• I need assistance in drafting siginal in file

  Hello

  I have faced the problem by writing to measure file. I received a ((elles ne peuvent pas être câblées ensemble car leurs types de données (numériques, string, array, cluster, etc.) error status do not match.)) View the contextual help window to find out what type of data is required.

  The type of the source is cluster of 3 elements.
  The type of the sink is Dynamic Data.))

  How do I slove this problem?

  I've attached the labview file. I would be very grateful if you help to understand the problem.

  Khalid

  I guess it's different problem. If this problem "Writing to the file" is resolved, please mark the solution and start new post to your new problem.