BSOD with error code Bugcheck: 0xD1
Original title: the dreaded BSOD.
Hi, finally bite the bullet and ask for help.
Establish an office a few years back who worked perfectly without any problem, a couple of years, I decided it was time to upgrade and replaced the motherboard, RAM and graphics card with a clean install of Windows 7. He ran very well with some heavy for a week or two games and then the first BSOD came, nothing thought and turned down my graphics settings and tried to play again and then he started blue screening 5 minutes of any game. After many graphics driver reinstall (with driver sweeper), memtest runs and HD check blue screens have continued and I finally gave up on it.
Fast forward 2 years, I made another attempt on the desktop, 10 hours of updates Windows and updates of pilot followed a complete with MSE analysis and I booted up Fallout New Vegas, the game ran perfectly for 2 days and then blue screens started.
Help please!
Processor: AMD Phenom II x 4 955
RAM: 2x2gb Crucial
Mobo: Asus M4A785TD-V Evo
OS: Windows 7 64-bit
PSU: Corsair CX500
GPU: Gigabyte Nvidia GTX460
No overclocking
WhoCrashed reports
Friday, April 18, 2014 11:18:08 GMT crashed your computer
crash dump file: C:\Windows\memory.dmp
This was probably caused by the following module: dxgmms1.sys (dxgmms1 + 0xAA2A)
Bugcheck code: 0xD1 (24, 0 x 2, 0 x 0 x 0, 0xFFFFF88004172A2A)
Error: DRIVER_IRQL_NOT_LESS_OR_EQUAL
file path: C:\Windows\system32\drivers\dxgmms1.sys
product: Microsoft® Windows® Operating System
company: Microsoft Corporation
Description: DirectX Graphics MMS
Bug control description: This indicates that a kernel-mode driver attempted to access pageable memory with a high IRQL.
This seems to be a typical software driver bug and is not likely to be caused by a hardware problem.
The accident took place in a standard Microsoft module. Your system configuration is perhaps incorrect. Maybe this problem is caused by another driver on your system which cannot be identified at this time.
Thursday, April 17, 2014 22:38:20 GMT crashed your computer
crash dump file: C:\Windows\Minidump\041714-27861-01.dmp
This was probably caused by the following module: ntoskrnl.exe (nt + 0x75BC0)
Bugcheck code: 0x3B (0xC0000005, 0xFFFFF80002FABB05, 0xFFFFF88007EB6E30, 0x0)
Error: SYSTEM_SERVICE_EXCEPTION
file path: C:\Windows\system32\ntoskrnl.exe
product: Microsoft® Windows® Operating System
company: Microsoft Corporation
Description: NT Kernel System &
Bug control description: This indicates that an exception happened during execution of a routine that passes from non-preferred to the privileged code code.
This seems to be a typical software driver bug and is not likely to be caused by a hardware problem.
The accident took place in the Windows kernel. Maybe this problem is caused by another driver who cannot be identified at this time.
Thursday, April 17, 2014 22:09:37 GMT crashed your computer
crash dump file: C:\Windows\Minidump\041714-68921-01.dmp
This was probably caused by the following module: ntoskrnl.exe (nt + 0x75BC0)
Verification of error code: 0 x 50 (1, 0xFFFFF80002E86E49, 0xFFFFF88006C3D000, 0 x 0 x 0)
Error: PAGE_FAULT_IN_NONPAGED_AREA
file path: C:\Windows\system32\ntoskrnl.exe
product: Microsoft® Windows® Operating System
company: Microsoft Corporation
Description: NT Kernel System &
Bug control description: This indicates that invalid system memory was referenced.
This seems to be a typical software driver bug and is not likely to be caused by a hardware problem.
The accident took place in the Windows kernel. Maybe this problem is caused by another driver who cannot be identified at this time.
Thank you!
I would remove the stick that failed and operate the system for a few days.
Kind regards
Patrick
Tags: Windows
Similar Questions
-
Windows Vista SP2, random BSOD with error checking code 0 x 19
Hi all
I have seemingly random crashes on my old laptop 3 years recently - BSOD with error checking code 0 x 0000019 (0x00000020, 0xe92f4780, 0xe92f48d0, 0x0a2a0440), and BlueScreenView says that accidents are caused by ntkrnlpa.exe and Ntfs.sys. I have absolutely no idea why it happened--unusual does update, none of the material changes & software installations. The system hangs especially after maybe one or two days after starting with some sleep & wake ups inbetween and the only accidents while there are prominent running shows - namely, all the accidents that happened while I was running Firefox. Seconds before the BSoD (shell & all) system simply freezes and does not respond to ctrl + alt + delete, but is still running (as indicated by the fact that once, I forced a power off and after that restart the event log indicates the previous stop at was not planned), then watch the usual BSoD screen.
After doing some googling, I began to suspect that this should be a memory or a hard drive problem, or maybe an overheating causing the two since he not there no significant change of software on my computer recently again issues just appeared without reason. So I cleaned my laptop fan and the heatsink and ensured that the hot air can leave the chassis without being blocked, did some checking of memory with memory auditing Windows - no problems in 5 innings and ran chkdsk on my system partition with all available options - perfectly normal, but the chkdsk has acted quite strangely that check all took about 30 seconds and no normal as the ID information of partition, size etc. that should be there never appeared; is this a normal behavior? or something is wrong with my chkdsk?
I'm still (lol) impatiently waiting for the next crash, not sure whether the problem is still there or not. Meanwhile could you please help me understand what is the problem with my system?
It seems that the disc is the most likely cause. If it is intermittent, it may be difficult to diagnose.
The manufacturer of the laptop provides any diagnosis? Several manufacturers have a key at startup to access the diagnostics.
CHKDSK should last several minutes. There is information about the different ways to run chkdsk here:
http://www.Vistax64.com/tutorials/67612-check-disk-Chkdsk.html
You can try this disc test program:
http://www.Seagate.com/www/en-us/support/downloads/SeaTools/
If the version of WIndows does not find anything. Try to use the version BACK from a CD.
-
Xbox it comes up with error code 0 x 80070102
Original title: Xbox one
My profile worked fine until today. I used, put a game on hold so that it loads and then it asks "who are you? And I select my profile and enter my password. Then, he thinks for a while and recharge the profiles and said nothing. So sometimes it comes up with error code 0 x 80070102, and I came here first of all she says to do is restart.
My ordeal to live could be out of date?
Ask here as Xbox has its separate forums:
-
Windows 2008 SP2 installation failed with error code 0 x 80041002
Hello
I have a Windows 2008 x 86 with Service Pack 1 installed. I tried to install Service Pack 2, but failed with error code 0 x 8004102.
I tried the steps in http://support.microsoft.com/kb/947366:
1 uninstalled antivirus.
2. install KB947821 analysis tool
3. downloaded and run the standalone version http://www.microsoft.com/downloads/en/details.aspx?FamilyID=a4dd31d5-f907-4406-9012-a5c3199ea2b3&displaylang=en
Without success. What should he do next?
Thank you
Frank
Hi Frank_673,
Your question of Windows is more complex than what is generally answered in the Microsoft Answers forums. It is better suited to the audience on windows server. Please post your question in the forum.
Link:http://social.technet.microsoft.com/Forums/en-US/category/windowsserver
With regard to:
Samhrutha G S - Microsoft technical support.
Visit our Microsoft answers feedback Forum and let us know what you think.
-
Cannot download kb978886 with error code 80070570__
Cannot download kb978886 with error code 80070570
yogiyogi,
0 X 80070570 - ERROR_FILE_CORRUPT
I recommend you:
Go to a command prompt:
Start, all programs, accessories, command prompt. Right click on command prompt and select "Run as Administrator"http://windows.microsoft.com/en-US/windows7/How-do-I-run-an-application-once-with-a-full-administrator-access-token >
and run sfc/scannow http://support.microsoft.com/kb/929833>
Type exit (to close the elevated command prompt window)
See if that solves the problem. If not, run the updatehttp://support.microsoft.com/kb/947821system tool >
-
Windows does not update with error code 8024402C
Windows does not update with error code 8024402C
Quote your full version of Windows (for example, WinXP SP3;) Windows XP 64 - bit SP2; Vista SP1; Vista 64 - bit SP2; Win7; Win7 64 bit) when you post in a forum or a newsgroup. Please do it in your next reply.
What application or antivirus security suite is installed and your current subscription? What anti-spyware (other than Defender) applications? What third-party firewall (if applicable)?
A (another) Norton or McAfee application has already been installed on the computer (for example, a free trial version which is preinstalled when you bought it)?
0x8024402C error code when you try to install updates on Web Windows Update or Microsoft Update sites:
http://support.Microsoft.com/kb/900936~ Robear Dyer (PA Bear) ~ MS MVP (that is to say, mail, security, Windows & Update Services) since 2002 ~ WARNING: MS MVPs represent or work for Microsoft
-
Installed windows 7 - Ultimate (32 bit) and after that, I sometimes have a blue screen with error code: 0 x 00000003, 0x86FF8688, 0x86FF87F4, 0x82E2FEC0
And I also noticed that some hardware is not installed to properliy:
1 base system device:
PCI\VEN_197B & DEV_2384 & SUBSYS_3624103C & REV_00
PCI\VEN_197B & DEV_2384 & SUBSYS_3624103C
PCI\VEN_197B & DEV_2384 & CC_088000
PCI\VEN_197B & DEV_2384 & CC_0880Device base system 2:
PCI\VEN_197B & DEV_2382 & SUBSYS_3624103C & REV_00
PCI\VEN_197B & DEV_2382 & SUBSYS_3624103C
PCI\VEN_197B & DEV_2382 & CC_088000
PCI\VEN_197B & DEV_2382 & CC_08803 base system device:
PCI\VEN_197B & DEV_2383 & SUBSYS_3624103C & REV_00
PCI\VEN_197B & DEV_2383 & SUBSYS_3624103C
PCI\VEN_197B & DEV_2383 & CC_088000
PCI\VEN_197B & DEV_2383 & CC_0880unknown device 1
ACPI\ENE0100
* ENE0100unknown device 2
ACPI\HPQ0004
* HPQ0004Can someone help me with this problem?
Thank you very much. There is a hard drive problem. With the seagate tools, we could solve the problem.
-
Please PLEASE help - I have Genuine Windows but had 2 re - install it n now I can't validate cuz this---> Validation incomplete: ActiveX error with error code [0 x 80080296].
What can I do? Thank you n God bless.Quote your full version of Windows (for example, WinXP SP3;) Vista SP1; Vista 64 - bit SP2; Win7; Win7 64 bit) when you post in a forum or a newsgroup. Please do it in your next reply.
What problems do you think that reinstalling Windows can solve?
Did you do a repair installation, or you format and do a clean install?
=================================
Please go to http://www.microsoft.com/genuine/ and click on the button to validate Windows, and then restart your computer.
If you were not able to validate, follow these steps:
1. Download this diagnostic tool, save it to your desktop: http://go.microsoft.com/fwlink/?linkid=56062
-Online Windows XP: double-click the executable file to run the tool.
-Online Vista & Win7: right-click on the executable and select run as administrator to run the tool.
2. after running the tool, click the Windows tab, and then click the copy button (on the Clipboard).
NB: You can open a new file in Notepad, paste the contents of the Clipboard in it & keep for future reference.
3 start a new post in the appropriate forum of Microsoft Genuine Advantage and paste the results of the WGA diagnostic data in a detailed post: http://social.microsoft.com/Forums/en-US/category/genuine
4 Troubleshooting specialist will analyze the data and recommend an appropriate solution.
~ Robear Dyer (PA Bear) ~ MS MVP (that is to say, mail, security, Windows & Update Services) since 2002 ~ WARNING: MS MVPs represent or work for Microsoft
-
I keep getting failed to install with error codes 643 and 646 on my Vista, when I install updates for Windows... What should I do?
Hello
Try this 1st to see if it helps, and it should:
Description of the Patch registration cleanup tool
http://support.Microsoft.com/kb/976220/------------------------------------------------------
If necessary :
Try this - Panel - Windows Updates - on every update that will not be installed - click on the important updates
or the update itself - double click a view more information (or click top then discovers on the right)Those who will take you to a page where you can download the update.
Or go here and the KBxxxxxx number to download it.
Download Center - mount the KBxxxxxx.
Microsoft Download Center
http://www.Microsoft.com/downloads/en/default.aspxDownload - SAVE - go to where you put them - click on - RUN AS ADMIN
Then you can right click on the update in the updates Windows and HIDE.
If you get an error Installer install this version:
Windows install 4.5 Redistributable
http://www.Microsoft.com/downloads/details.aspx?FamilyId=5A58B56F-60B6-4412-95B9-54D056D6F9F4&displaylang=en----------------------------------------------------
Then run this:
How to reset the Windows Update components? -a Mr Fixit
http://support.Microsoft.com/kb/971058Description of the system for Windows Vista, Windows Server 2008, update tool and
for Windows 7
http://support.Microsoft.com/kb/947821------------------------------------------------------------
Because these are all Office updates you might get more information if necessary in the Agency of those groups that
may have experienced the same problem.Office newsgroups
http://www.Microsoft.com/Office/Community/en-us/FlyoutOverview.mspxMicrosoft.public.office.misc discussions
http://www.Microsoft.com/communities/newsgroups/list/en-us/default.aspx?DG=Microsoft.public.Office.misc&cat=en_us_01cb749f-c998-4762-8099-df71793c11c7&lang=en&CR=us------------------------------------------------------------
If necessary you can incident free get reports however the above should take care of it for you.
Windows updates - free Incident report
Go here and click on-> Windows Update fails while searching, downloading or installation of updates
http://support.Microsoft.com/GP/wusupport#tab3The security updates, you can get free support Incident report
http://www.Microsoft.com/protect/resources/support.aspxI hope this helps.
Rob - bicycle - Mark Twain said it is good.
-
Unable to recover the TCP/IP connectivity & corrupt Winsock keys with error code 11003
After being unable to solve the problems created by the McAfee download causing failure DComm and lost connectivity I uninstalled SP 3 and reinstalled.
I have a corrupted Winsock2 registry and auto config proxy TCP/IP keys and detect the proxy appear as 'not available '.
I tried to reset TCP/IP using netsh int ip reset c:\ reseting.txt and also the use of the patch tool. The error code is the function IntHelper.dll in IPMONTR. DLL could start with error code 11003.
I am able to visual determine that the winsock keys are corrupted, as described in kb/811259. I tried to reset the winsock2 registry keys by using the netsh winsock reset command. The error code is the IntHelperDll function in IPMONR. DLL could start with error code 11003.
I would like any suggestions or ideas that anyone can have for the restoration of connectivity.
Oh, and I'm not going to use McAfee products in the future.
Thank you.
Hi there nzcleman,
Download and run LSPFix from here: http://www.cexx.org/lspfix.htm
Read the instructions on how to use LSPFix carefully here: http://www.bleepingcomputer.com/tutorials/tutorial59.htmlOnce executed, restart your system.
Now download and run WinsockXPFix from here: http://majorgeeks.com/WinSock_XP_Fix_d4372.html
Restart your system once again WinsockXPFix finished (even though it should restart for you).I hope this will help :)
--> I hope this helps! Please mark it as correct answer or vote if it does :)<>
http://www.pcuk.biz - my website
Info from Microsoft about phishing . Information from Microsoft on the fake security software
-
A security update for Microsoft Office 2003 (KB2598361) cannot install with error Code: 0 x 80070643.
He did this repeatedly over and over again all week.
How can I fix it?
Hello
Method 1: download and install the update manually and see if it helps.
http://www.Microsoft.com/en-US/Download/details.aspx?ID=30294
Method 2: Perform the steps from the link below and see if it solves the problem.
Hope this information helps.
-
KB898461 repeatedly fails with error code 0x80070005 - what can I do about it?
KB898461 repeatedly fails with error code 0x80070005 - what can I do about it?
KB898461 repeatedly fails with error code 0x80070005 - what can I do about it?
Run the automatic fix here and try again once the update manually by downloading it from HERE
-
Internet, not able to browse computers on the network
The computer has internet access, but I am not able to browse the network. The workstation services and control of browser will not start. The event log shows the workstation service terminated with error code 2250. Also in the event log Workstation reports: could not load RDR device driver. Cannot run the sfc in safemode, gives the 0x000006ba error, the rpc server is unavailable. Runs under normal windows, noticed in the registry last run: 0x000003e3 error code (try adding c:\windows\system32\drivesr\i81xnt5.sys to the dllcache)I'm puzzled.Hello
I suggest you to send your request in the below link.
http://social.technet.Microsoft.com/forums/en-us/itproxpsp/threads
-
I'm having trobles bases of microsoft update and it comes up with error code 0 x 80070424
"I had a security problem, a virus hoax" XP internet security ', I got rid of that and installed "microsoft essentials" but it won't update comes up with error code ' 0 x 80070424 "when I try to update
Either the malware damaged and made a necessary update service unusable or malware peut even reside on the system.
ERROR_SERVICE_DOES_NOT_EXIST 80070424
The specified service does not exist as an installed service.There is a forum dedicated to the problems with Microsoft Security Essentials update-
Updating virus and spyware definitionsBut, since it can still be malware residing on your system, suggest you either wait until a moderator moves your forum post MSE of scanning, detection and removal of threats or see if the Safety Scanner care can detect and remove any malware resident - OneCare Safety Scanner
If your system cannot access the OneCare Safety Scanner while it is usually a sign that the malware still resides. -
I have a compaq presario cq60 with vista. Could not start after the installation of windows updates. HP recovery failed with error code 100a and bios self-test gave error fail #1-07. I took the hard drive and installed in my office. Windows Explorer displays the main and recovery partitions.
The primary partition has the following folders (including hidden & system)
The recovery partition has the following (including the language files more)
Someone at - it ideas why my laptop does not work?
Thank you
Greg
Hello
You press F11 on startup with a HP Compaq to start the recovery process.
For problems with the recovery process, you will need to contact HP.
BIOS problems:
There are messages for the HP Forums for posters with similar errors:
All the answers it point to a drive about to fail
See you soon.
Maybe you are looking for
-
Letters op mijn scherm zijn niet scherp. Hoe kan ik dat verhelpen?
Sinds een paar weeks letters op mijn scherm vaag en niet schep zijn, schokkerig. In solution, ik zie wel scherp letters Explorer Use AVG virus pakket als IKEn AVG tune up PC om you versnellenIK weet niet of het daar ligt aan, maar dan zou dat binnen
-
12.2.3 for Windows Vista
I need the latest version of Itunes for a new iPhone SE. I'm still on Windows Vista. Http://www.apple.com/itunes/download/ page: 12.3.3 iTunes for Windows XP/Vista
-
Windows 7 on Satellite L300 - 17l - some drivers do not work
My machine worked fine on XP but I installed the new copy of Windows 7. I installed most of the drivers and they worked, but when I come to install value added Package (in Toshiba says that VAP includes Power Saver). It seems complete installation ve
-
Original title: print printer print I have a Samsung 1600 printer and when trying to print argument or appeal procedure not valid from 1 to Char message Script error line 2432 appears. I'm unable to find the cause of this error. All connections seem
-
disable the window maximize AFTER return to windows windows 7 fron 10
I recently returned to windows 7 (time to go to windows 10 months) and since then I can not turn off to maximize windows. I disabled the "prevent windows" option in the ease of use of the mouse and keyboard with the combinations to have an on and of