BT tray could not start the device bluetooth stack service

Similar Questions

• Could not start the Windows Security Center service.

  Could not start the Windows Security Center service. Tried to go to Services, but this message. Help me please!

  the error code says...

  one or more ActiveX controls could not be displayed because that is:

  1. your current prohibiti of security settings on this page activex controls running or,

  2. you have blocked an editor of one of the controls.

  Hello

  ·        Since when are you facing this problem?

  ·        Remember to make changes to the system?

  Note: This section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, click the following link. http://Windows.Microsoft.com/en-us/Windows7/back-up-the-registry

  I suggest you follow the steps mentioned below.

  a. click on Start menu and type regedit.exe in the start search box and press ENTER.

  b. navigate to the following location. You must remove 1 (parasite) of additional area

  HKEY_CURRENT_USER\Software\Microsoft\Windows\CurrentVersion\Internet Settings\Zones\
  with number Pseudo-graphique, you will see before the number of zone 0.

  c. check to see if the problem is resolved;

  Thanks and regards.

  Thahaseena M
  Microsoft Answers Support Engineer.
  Visit our Microsoft answers feedback Forum and let us know what you think.

• Windows could not start the Base Filtering Engine service's local computer

  I get this error

  Windows could not start the Base Filtering Engine service's local computer
  Error5: Access denied

  When I try to start it but it won't start

  My computer is

  Windows 7 Home Premium

  64 bit

  Hello

  1. don't you make software changes before the show?
  2. do you have anti-virus outside Microsoft Product software?
   
  Follow method 3 in this article:
  http://support.Microsoft.com/kb/2530126
   
  
   

• Could not start the forefront endpoint protection service

  I think I gained a Trojan horse.  My Forefront Endpoint Protection says that it is impossible to start the specified service is not an installed service.
  When you look under msconfig, I don't see any service running or not.  What should do?  Help is appreciated.

  Hello, the needy.

  You have installed Microsoft Essentials?

  Restart your computer and start typing F8.  Select Mode safe mode with networking.  Download the following tool and run a scan full to make sure that you are not infected with malware.  I still recommend that you disable the system restore because the malware is known to hide in the restore points.

  http://www.Microsoft.com/download/en/details.aspx?displaylang=en&id=16

  System restore - don't forget to turn it back on when finished.

  http://www.howtogeek.com/HOWTO/Windows-Vista/disable-System-Restore-in-Windows-Vista/

  Prerequisites for Forefront Endpoint Protection installation on a server

  http://TechNet.Microsoft.com/en-us/library/ff823830.aspx

  Advanced endpoint protection 2010 error SCCM facility

  http://social.technet.Microsoft.com/forums/en-us/FCSNext/thread/627f12dc-cba4-4F38-9bd2-f3219fbd221d

  Try validation of Technet forum for further assistance.

  http://social.technet.Microsoft.com/forums/en-us/category/forefront

• Error message "could not start the system event notification service.

  Original title: windows s event notification service does not start whwn that my PC is started

  Hello

  I'm running on the windows operating system 7, suddenly today I see when my computer starts, he says:

  1. windows event notification service does not start

  2. start menu back to Classic view, all of the aero themes has turned.

  3. right click on desktop seems to not work

  I have not had any installed software recently, don't know why it happened you can help me with this? I've restored a few days again the same question

  can someone help me?

  Sujith Hello,

  Thanks for posting your question on the Forums of community of Microsoft.

  According to the description, you got the error message "windows event notification service cannot start.

  I suggest to follow the suggestions of Bikesh T replied on 1 June 2011 from the link below and check.

  Reference:

  http://answers.Microsoft.com/en-us/Windows/Forum/Windows_7-networking/failed-to-start-system-event-notification-service/eec9b5cd-fda9-43eb-B6D0-d2ba92e79413

  Hope the helps of information. Let us know if you need help with Windows related issues. We will be happy to help you.

• "Could not start the system event notification service" windows 7

  My computer started to get this message "Failed to start system event notification service" submarine ball, I have windows 7.

  I tried netsh winsock reset, but the problem persists.

  the sfc/scannow shows no errors.

  I am not able to connect to the internet. Kindly help

  Hello

  I suggest you follow the below methods that can help you resolve your isssue:

  Method 1:

  Restart the system event notification service.

  • Open the Start Menu.
  • In the online search, type services.msc and press enter.
  • If you are prompted, click on continue in the UAC prompt or provide the password for administrator approval.
  • Right click on the service you want to restart.

  Method 2:

  I recommend you perform the clean boot.
   
  Put your boot system helps determine if third-party applications or startup items are causing the problem. If so, you need to maybe contact the manufacturer of the program for updates or uninstall and reinstall the program.
   
  See the following article in the Microsoft KB for more information on how to solve a problem by performing a clean boot in Windows Vista or Windows 7:
   
  How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7
  http://support.Microsoft.com/kb/929135 
   
  Note: After troubleshooting, be sure to set the computer to start as usual as mentioned in step 7 in the above article.

• Windows could not start the Secure socket tunneling service error of Protocol on the local computer 1079 error

  Hello, what can I do to fix this error?

  Hello Mehran,

  1 did you change on your computer?

  I suggest you try the following article and check if it helps.

  Services do not start, and you receive an error 1079 on a computer that is running Windows Server 2008, Windows Vista, Windows 2008 R2 or Windows 7
  http://support.Microsoft.com/kb/2478117/en-us

  Thank you

• A small flag appears on the bottom of my screen that says activate security service Windows, but when I try to turn on it says could not start the Windows security service

  Original title: HELPPPPP

  My computer a little flag in the background with a x... said red it turn security service windows, but when I try to turn it on... it said windows security service cannot be started :/

  Hey ChelseaHarris,

  Take a look at two responses in the thread below the link to see if they allow the Windows launch security service:
  Could not start the Windows Security Center service.

  If these steps do not help, try to run a full scan using the Scanner from Microsoft which can be downloaded using the link below:
  Microsoft safety scanner

  Hope that helps.

• How to activate bluetooth Qualcomm Atheros AR3012 on laptop Asus when "Windows could not activate the device (the function of bluetooth?

  airplance mode: off

  WiFi: connected.
  Bluetooth: off
  Ultrabook ASUS, bought on 14 April 2013
  Qualcomm-Atheros Bluetooth 4.0 AR3012 + HS
  Unable to activate the device.
  Basic troubleshooting done:
  1. reboot the PC
  2. activate and deactivate the airplance mode
  3. put updated driver
  Impossible to activate bluetooth
  error message: windows could not activate the device.
  tried steps 1-3 again me. same message showed.
  no other device is connected via USB when trying to enable bluetooth.
  known issue after removing antivirus software and install another antivirus software. but now I'm running on windows Defender.

  Hello

  Thank you for the update.

  As none of the above suggestions work, I suggest you to contact the Asus support for any future reference.

  http://support.ASUS.com/ServiceHome.aspx?SLanguage=en

  Feel free to contact us for any other questions related to Windows.

• BlackBerry Smartphones could not start the camera

  When you try to start the camera, I get this message... Could not start the camera.  Close other applications and try opening the camera again.

  I have nothing else other running the phone itself is waiting for a call.  I can't find anything on the Blackberry support for the same problem unless I'm missing it.

  When I got on the phone a few months previously, it worked fine and I could send pictures, now he's stuck.

  Thanks for any help.

  CB

  Hello

  It's worth a try:

  Go to the OPTIONS - ADVANCED OPTIONS - HOST ROUTING TABLE click here to enter, then the menu button to register now.

  You will receive an email for verification.

  Remove the battery while the device is activated, replace after one minute,

  Let the device reboot 1-3 minutes, try again the camera. Please let me know! Thank you

• I have error #1053 windows could not start the printer spooler. Help

  Windows could not start the printer spooler. I received the error #1053.
  whatever it is sent to the printer never finished loading and crashes to the top
  my computer, so I have to re - start.

  This forum is for posting comments on the web site of Microsoft Answers, is not for technical questions.  Ask your questions to http://answers.microsoft.com/en-us/windows/forum/hardware, making sure that you specify your Windows version in the drop-down lists at the top.

• Could not start the time service windows on the local computer 2 error

  Cannot update the system clock of time Internet.

  After double click to display the time in the taskbar, the Date and time properties window appears.

  Then I time tab-click Internet, and then click Update now - this produces the following message...
  "Year error occurred getting the status of the last synchronization." The RPC server is unavailable ".
  Then I clicked on start > Control Panel > Administrative Services > Services > time Windows
  I click Start the service and get the following message...
  "Could not start the time service windows on local computer."
  "error 2: the system cannot find the file specified."
  Help!  What now?

  Hello

  Glad to know that the problem has been resolved. If you have additional questions on the computer, please ask your question about Windows and we will be happy to help you.

• Windows ICS Services stopped & could not start the windows firewall in windows xp professional sp2.

  I am facing a problem regarding the ICS Service & could not start windows in windows Xp service pack 2 firewall, whenever I have install windows Xp Sp2 and join the network, the ics services ceased and the windows firewall. While windows firewall service starts when I restart my computer. But after some time stopped again had services that I'm cold does not access the readers of part, could not access network resources.this problem occurs only on windows xp sp2, when I install windows 7, then all better.i work fetch on different forums, apply the settings but I'm not able to solve the problem on base all the time. Someone tell me the permanent solution of this problem, on a forum, I see this solution,sharedaccess.reg and settings.but I am still unable to find a permanent solution.

  Someone tell me the permanent solution of this problem?
  
  
  
  

  Hello

  Here are a few troubleshooting steps that you can try to solve this problem. See the following links.

  You cannot start the Windows Firewall service in Windows XP SP2

  http://support.Microsoft.com/kb/920074

  Registry WARNING: This section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, see this link:

  http://support.Microsoft.com/kb/322756

  Troubleshooting settings of Windows Firewall in Windows XP Service Pack 2 for advanced users

  http://support.Microsoft.com/kb/875357

  If you have additional problems, please reply to this post and we will be happy to help you further.

• Receive automatic updates for Windows XP "error 127: the specified procedure could not be found." Also "error 0 x 80240036: could not start the service automatic updates on local computer»

  Update CPU which proved later to be bad.  Replaced by original CPU.  Re-installed Windows XP Home using a slipstreamed CD that I burned the original non - OEM drive that has Service Pack 2.  Integrated Service Pack 3 which I got from the MS. site  Everything works well except for Windows Update.  The setting seem to be correct in Administrative Tools/Services.  The status of the Service is "stopped".  When I try to start the automatic updates from Administrative Tools/Services I receive "error 127: the specified procedure could not be found."  Also "error 0 x 80240036: could not start the service automatic updates on local computer»  Used the range of anti-virus and malware and found nothing.  Currently using Avast 7.0.1426.  I also used various tools of Fix - It MS nothing helps.  Any help would be greatly appreciated.  Thank you.

  Hello

  1. what application or antivirus security suite is installed and your current subscription?

  2 Norton (another) or a McAfee application ever installed on this machine?

  3. What are the fix applications that you used so far to try to fix this problem?

  Try the next method and check if that helps you with the question of the 127 error you receive.

  Method 1: Rdding the DLL file by doing the following:

  1. Click Start and click Run, in the search box type CMD and press to enter.
  2. right click on CMD in the list and click "Run as Administrator".
  3. type the following command and press ENTER. Regsvr32 msvcp71.dll
  4. close the command prompt window.

  Method 2: run the file system (CFS) Checker:

  (Note: you need an XP installation disk to start the System File Checker search.)

  The SFC command is used to detect and resolve problems with the files on Windows XP and Windows Vista computers. This command allows you to launch the Windows File Protection Service and allows you to analyze all integrity-protected Windows files and replace all problematic files identified.

  1. click on start, and in the box to start, search type CMD
  2. right click on CMD in the list and click "Run as Administrator"
  3. type the following command and press ENTER. Sfc/scannow
  4. close the command prompt window.

  For more information on scan SFC (System File Checker), please look in the link mentioned below.

  http://support.Microsoft.com/kb/310747

  I hope this helps.

• Could not start the Security Center Service

  I clicked on Windows security alerts, it showed "The Security Center Service is disabled".  Then I clicked "Activate now", came a "Could not start the Security Center Service" message.  Please tell me what I need to do.

  Thank you very much!!!

  Longpo

  See if these are useful:

  http://support.Microsoft.com/kb/2519899

  OR

  http://support.Microsoft.com/kb/2510301