Bug: highlighted in Acrobat DC/Windows 10 with less than 100% opacity appears corrupted
Text that I report the Acrobat DC with fixed to any value less than 100% opacity looks damaged and unreadable. Not sure if this is a bug of knowledge or something that should be brought to the attention of the devs.
For example, created in the help file when you open acrobat.
Hi rvgraham,.
This issue has already been reported as a bug. I'll let you know if there is any update on this issue.
Kind regards
Nicos
Tags: Acrobat
Similar Questions
-
Windows 7 adjustable threshold less than 100% of the battery charge?
Hello.
I have a Clevo P170HMx which is a cell phone game impressive.
Probably the only thing I don't like is that my battery is always 100%. I used my laptop plugged into an electrical outlet.
and knowing that to have my battery to 100% and always load will destroy the battery life.
My previous laptop was an IBM Thinkpad, and it had a maximize battery gauge allows you to define the allowed charge batery
threshold. I got this game to start the load to 15% and stop loading at 20%. I had this same battery from the time of purchase
until 4 years later, I got my new laptop, the battery remained in excellent condition with load capacity full not escape
as do other batteries when they stay at 100% and reload constantly.
Is it possible on Windows 7 pro to change the threshold of battery charge to stop less than 100% load to save battery life
life? Or is it Windows software available for download that will make this recommended?
If Windows 7 is not able to do this, I would say something in an update service pack or the next version of Windows.
Thanks a lot for your help.
See you soon...
Hello
In normal circumstances as soon as the lithium-ion battery is full, a properly functioning charger will stop the charge and will only engage when the battery voltage drops to a low level. Most of the users do not remove AC power, and this practice is safe.
The latest Lithium-ion batterires have a limited number of Discharg/charge cycles.
You can create a detailed report on the State of the battery to double check the battery status.
1. go to Start / all programs / Accessories. Click on the command prompt and select run as administrator.
2 in the command prompt window, copy / paste the following command.
powercfg-energy-output %userprofile%\desktop\energy-report.html
Press ENTER.
Wait for the command to complete (usually about 2 minutes).
This create a file named energy - report.html and place it on your desktop.
3 go to your desktop and double-click the file to open.
Scroll to the bottom for the battery: battery information section.
You will see:
Rated xxxxx
Xxxxx full last Charge
(Where xxxxx is a number)
4 to calculate the amount of full Charge capacity left in the battery split the value of the last Charge full rated capacity and multiply by 100.
For this example , use the following numbers.
Nominal capacity 4400
Last full 2937
Calculator enter 2937 and divide by 4400.
Multiply the multipliez le resultat result by 100 , then press =.
The result will be 66,75
This means you have 66,75% of the nominal capacity of the battery.
Tell us what you find.
Concerning
-
After migration, iPhoto again takes massive space on the hard drive? My system is showing iphoto and photos with more than 100 GB of space each. I once picture is merged uses always massive GB of space? Thank you.
# Multimedia files are hardlinked.
(141516)
-
I have problems to download from a Web site with more than 100 pages. The download is stuck at 6%. Muse has a page limit? I use Adobe Muse CC 2014 v7.4
425 is the error that you have been doing all along? That looks like a firewall or router problem or a server side hosting configuration problem.
-
How to install DSO with less than 4 G (Oracle 12 c)
What installation ASM for Oracle 12 c, one of the pre-requisites runInstaller is a RAM of 4 GB.
How to make a DSO installation with less than 4 GB?
Thank you and best regards.
Slim wrote:
According to my knowledge, you cannot change the value requirements of memory. The oracle gave the minimum memory required to install in the installation manual.
You may receive this warning on the screen of prior checking. You can choose to ignore this warning. There will be no problem in it.
How can you say "there is no problem in it. It is a pre-required for a reason. Yes, history has shown that, in some cases, some pre-reqs can meaningfully be ignored during installation. But it is irresponsible to tell someone that they can just blithely ignore the warnings and "there is no problem."
-
Algorithm of counting with greater than 100 results
Hello!
I'm trying to use contains with counting algorithm, but I have problems when there is more than 100 occurrences of the search word, the return of PARTITION (1) always stop at 100. I use Oracle 10 g.
For example:
SELECT id, SCORE (1)
of tab_docs
WHERE CONTAINS (docs,' < query >)
< textquery lang 'grammar' = 'CONTEXT' = > MARY
< / textquery >
< score datatype = "INTEGER" algorithm = "COUNT" / >
(< / query > ', 1) > 0;
Result:
ID - SCORE (1)
1 - 100
But there is 2431 occurrences of 'MARY' in this document on ID = 1
If the number of occurrence is less than 100, then it works very well, for example:
SELECT id, SCORE (1)
of tab_docs
WHERE CONTAINS (docs,' < query >)
< textquery lang 'grammar' = 'CONTEXT' = > JAMES
< / textquery >
< score datatype = "INTEGER" algorithm = "COUNT" / >
(< / query > ', 1) > 0;
Result:
ID - SCORE (1)
1 - 87
How can I do to count more than 100 events in this situation? Another way to solve the problem?
Thank you in advance!
Published by: user3779713 on 10/17/2010 18:58The following example uses a function to convert the clob BLOB, then extract the occurrences.
SCOTT@orcl_11gR2> create table tab_docs 2 (id number, 3 docs blob) 4 / Table created. SCOTT@orcl_11gR2> declare 2 v_docs clob; 3 begin 4 for i in 1 .. 243 loop 5 v_docs := v_docs || 'Mary '; 6 end loop; 7 insert into tab_docs values (1, utl_raw.cast_to_raw (v_docs)); 8 end; 9 / PL/SQL procedure successfully completed. SCOTT@orcl_11gR2> create index tab_docs_idx 2 on tab_docs (docs) 3 indextype is ctxsys.context 4 / Index created. SCOTT@orcl_11gR2> create or replace function occurs_in_blob 2 (p_blob in blob, 3 p_text in varchar2) 4 return number 5 as 6 v_clob clob; 7 v_occurs number; 8 begin 9 dbms_lob.createtemporary (v_clob, true); 10 ctx_doc.ifilter (p_blob, v_clob); 11 v_occurs := (length (v_clob) 12 - length (replace (upper (v_clob), upper (p_text), ''))) 13 / length ('Mary'); 14 dbms_lob.freetemporary (v_clob); 15 return v_occurs; 16 end occurs_in_blob; 17 / Function created. SCOTT@orcl_11gR2> show errors No errors. SCOTT@orcl_11gR2> select id, 2 greatest 3 (occurs_in_blob (docs, 'Mary'), 4 score(1)) score 5 from tab_docs 6 WHERE CONTAINS 7 (docs, 8 '
9 ', 1) > 0 13 / ID SCORE ---------- ---------- 1 243 1 row selected. SCOTT@orcl_11gR2>MARY 10 1112 -
I use Lightroom 4.4 on windows 8. If I have less than 500 photos on the catalog, I do a lot of alterations and cleaning of the images and therefore the size of the catalogue is currently at 2.16 GB. Lightroom works fine, but I'm taking a risk by leaving the catalog to grow beyond 2 GB? Should I close it and start a new catalog? Thanks for your suggestions.
Many local adjustments (brush strokes, spot healing) can have a huge impact on the overall size of the catalog because they are all saved as stages of the individual history and so I wouldn't worry - there is nothing wrong with your catalog. See my thread here since a few years back: which affects the size of the Lightroom catalog file? where Rob Cole usefully thought of it for me.
You could delete the history if you wanted and that I'd be willing to bet that the size would be reduced considerably. That said, my catalog file is larger than 10 GB (as I do a lot of local changes as stated in the thread I linked to) and it causes no problem at all, apart from resulting in a backup of slow catalogue (my previews resume another 30 GB or more). I have not yet felt the need for the history of the Reformation, but doing so probably would increase my catalog to about 1 GB, so it's an option if size becomes a problem for me.
My advice: continue anyway and don't worry in this regard.
M
-
Esxi execution 5 with less than 2 GB of RAM
Hello
I rushed to study for examination VCP 5. Is it possible to run ESXi with less thant 2 GB of RAM. I'm running my laboratories with VMware Workstation 8. I tried the ESXi 4 way and it doesn't work?
Anyone succeeded?
Thank you!
The installer would require at least 2 GB of RAM. That said, you can work around the problem after the installation. See below
-
try to install the free trial version of Acrobat download of XI pro stalled less than a minute to go... error 110
Hi annette10s,
Please see the solution to troubleshoot Adobe Download Assistant - http://helpx.adobe.com/creative-suite/kb/troubleshoot-download-assistant.html
If you continue to experience difficulties, you can try to start a direct download by following the steps listed in http://forums.adobe.com/thread/981369
-
Research problem of Windows 7 with number with less than symbol search
I'm doing a search in a folder with a multiple excel spreadsheet and you're looking for an example of string 1045-02.
I tried using '1045-02' but gives everything that has an in 1045. It will give me 1045 10045-01, - 02 and so on. But no need doc with 1045-02 in it.
I even tried to use "1045" ~ = "-" '02' but the same. I tried several 3rd party also tools but nada.
Someone at - it and ideas or suggestions?
Try this:
~ = "1045-02".
However, be aware that research content requiring special symbols such as ~ = doesn't work when the search in unindexed fields. I turned off completely so that I don't have to think as indexing.
-
Yet 5.1 - project with more than 100 chapters
I have a project I'm working on what must be divided into 110 chapters. Still can only process 99 chapters per sequence so I created two sequences, one with 99, another with 11 Chapter markers. I imported both of these sequences of Premier Pro 5.5 with 5.1 again. I was able to tie the end action of 99 Chapter markers continue to Chapter 1 of the following sequence marker, but I see no way to link the chapter markers 1 to return to the previous sequence if you tell it to go to the previous chapter.
I do not know if this is possible, but I am under a tight deadline, so any help would be greatly appreciated!
Thank you
Bottom line, it is not possible with yet. (Not possible with any program without a script)?
I don't remember if there is no work around.
-
Is it possible to virtualize ESXi 4 with less than 2 GB of RAM?
I would like to install ESXi 4 in a VM using VMware Fusion, so that I can do some testing with the busybox, etc. instead of playing with my production host. I'm NOT interested in VMs in the ESXi virtual I want to only run the hypervisor.
The problem I have is that my MacBook Pro has only 2 GB and when I tried to create a virtual machine with 1 GB, ESXi will not settle. Is there a way to circumvent this requirement of RAM?
Thank you
Take a look at this blog, http://www.yellow-bricks.com/2009/05/08/running-vsphere-within-workstation-will-take-up-a-lot-of-memory/
-
How can I make my program works with more than 100 class files?
As soon as my program generates more than 100 class files I get the following error: cannot run program "jar": CreateProcess = 2 error, the system cannot find the file specified. Is there a way I can increase this limit? My program is small. There must be way to work and Add again all the features I need to add. Thank you
I got it to work. I reinstalled the JDK, then set the path in the environment variable, restarted eclipse and it worked. It's still a mystery why it worked until I got 100 classes.
-
When my preview window is not more than 100%, it displays vertical colored lines
Hello
When I try to import a clip (4 k of GH4) it shows weird lines in my previews.
Now, the Preview on the right is set to 100%:
Now he's set to fit:
The problem occurs also in mode full screen, color workspace...
When the video is playing the bars have disappeared. And when the item is rendered, he went as well.
(adobe first pro cc 2015 is updated. The problem occurred before and after the update).
Anyone know what the problem is or how to fix it?
Thank you
Hello cletie,
When I try to import a clip (4 k of GH4) it shows weird lines in my previews.
Now, the Preview on the right is set to 100%:
The problem occurs also in mode full screen, color workspace...
When the video is playing the bars have disappeared. And when the item is rendered, he went as well.
(adobe first pro cc 2015 is updated. The problem occurred before and after the update).
Anyone know what the problem is or how to fix it?
Thank you
Using OS X El Capitan? It is still in beta and not yet supported. You can disable acceleration GPU for now to avoid this problem.
Thank you
Kevin
-
window will stop in less than a minute, stops and restarts everytime I use the computer
message-windows will be stop in less than a minute. appears, and then the computer stops and restarts. It's windows vista and it's this evertime I use the computer
Hello
· This happens randomly, or when you open any application on the system?
· Since when are you facing this problem?
· Remember to make changes to the system?
Check the event viewer for the newspapers and let us know. Follow the steps mentioned in the link below.
Open event viewer
http://Windows.Microsoft.com/en-us/Windows7/open-Event-Viewer
What are the information contained in the logs of the event (Event Viewer)?
http://Windows.Microsoft.com/en-us/Windows7/what-information-appears-in-event-logs-Event-Viewer
Method 1:
Step 1:
I suggest you to check in safemode, if the problem persists. Follow the steps mentioned below.
a. restart the computer and keep tapping F8 until you reach the start menu.
b. Select safe mode and press ENTER.
Step 2:
I suggest you do a clean boot and see if the problem still occurs.
To perform a clean boot follow the steps mentioned in the link given below.
How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7
http://support.Microsoft.com/kb/929135
Note: Follow step 7 to start the computer in normal startup.
Method 2:
It may be there is a scheduled task on your system. Check in Task Scheduler and if there is no scheduled tasks then, remove and check if the problem persists.
Automate tasks with Task Scheduler
Schedule a task
http://Windows.Microsoft.com/en-us/Windows-Vista/schedule-a-task
Thanks and regards.
Thahaseena M
Microsoft Answers Support Engineer.
Visit ourMicrosoft answers feedback Forum and let us know what you think.
Maybe you are looking for
-
How can I correct an error "Container Plugin for Firefox has stopped working"?
Windows 7, Firefox 30 After changing how manipulated Firefox cookies (changed by banning 3rd party cookies, ask permission to set cookies), I rebooted my system and Firefox would not - I got the error message in question. I uninstalled Firefox and th
-
Replacing a video card on Satellite A210-1 has 0
In my computer laptop Satellite A210-1 to 0 it is ATI Mobility Radeon HD 2600 broken video card. Now I can't find another as its old model. Including those different similar can (replace) put it inside my laptop?
-
Re: Satellite A10-S100 - how to replace the keyboard?
I need to replace the card key of my Satellite A10-S100. What are the steps I should follow? I have to unscrew all the screws in the back?
-
Satellite L50-A-119 - BIOS stuck
Hello world. I have a problem that I've never had before. I have the Satellite L50-A-119. When I said the update of the BIOS - it went to 100% and got stuck. I can't do anything, I don't know what to do now. This is an image on the screen on the witc
-
IS THERE A NIVIDA PROBLEM GOING ON WITH HP LAPTOP DV9535? MINE WENT BLUE SCREEN ONLY.
I BOUGHT MY LAPTOP HP 9V9535 NR IN 2008 ABOUT. NO PROBLEM UNTIL RECENTLY, WHEN I STARTED TO USE IT MORE, HE WOULD HAVE STOPPED UNEXPECTEDLY AND WILL NOT START BACK UP UNTIL NOW, IT HAS COMPLETELY DISAPPEARED... I TOOK IT TO A COMPUTER SHOP, AND THEY