IS THERE A NIVIDA PROBLEM GOING ON WITH HP LAPTOP DV9535? MINE WENT BLUE SCREEN ONLY.

Similar Questions

• There is a problem of storage with the data path [path to hard] store

  I have two sites connected by using a VPN connection over a WAN link. In each site, I have an esxi with several VMS host and operation of replication device of vSphere (v 5.1.1.0 Build 1079383) in each site. In each site, these is also a vCenter server with the device of RVS registered and logged with the other site. All the virtual machines are configured to replicate to the other site.

  In my initial configuration of the RV (first install) site remote had 2 vNIC used for the management and I figured it was my problem with replication (see kb2040302). So I have changed since my host configuration from the remote site to have that single vnic management (does not solve the problem). I then registered, removed and reinstalled the VR device without change to the problem.

  What is going on:

  1. I am able to configure replication between sites without a problem.

  2. first replication occurs between sites and reports a success.

  3. the remote VM replication to the main site continue to work properly and all is well for the days and continue to work.

  4. the main site of VM replication to the remote site fails on the second and all attempts to reproduce the error. There is a problem of storage with datastore path '[datastorename] '.

  

  I followed the advice of kb2040302 better as I can. But I must confess that I could use some of the more detailed instructions on how and what site should I check the logs. and how to check my configuration management vnic.

  I'm looking for someone provide additional troubleshooting steps with good detail.

  Thank you

  
  

  Resolution:

  The problem was caused by a security setting on the NFS Server data store. VRA could not delete the (hard).

  Specifically, my problem was with authorizations on the Synology NAS under the application of the "file Station.

• Hey, need help. I get this in my iPhone that 'there is a problem of billing with a previous purchase. Please update your payment method"in any way I can remove my visa card from iTunes

  Hey, need help. I get this in my iPhone that 'there is a problem of billing with a previous purchase. Please update your payment method"anyway I can remove my visa card from iTunes?

  You must pay your debt first.

• my laptop do not stop proprly .when I do stop my laptop to come in blue screen so how do slove this problem?

  my laptop do not stop proprly .when I do stop my laptop to come in blue screen so how do slove this problem?

  You have an external equipment attached and turned on when stopping?

  All applications are closed before attempting to stop?

  Try to do a clean boot:

  http://support.Microsoft.com/kb/331796

  I would also make sure that all the drivers for hardware and software updates have been applied.

  How long have you been experiencing this problem?

  Have you installed a new hardware or software since you started facing this problem?

  Also perform the following operations:

  Check your hard drive for errors:

  Click Start

  Type: CMD, according to the results, right-click CMD

  Click on "Run as Administrator"

  At the command prompt, type: chkdsk /f /r

  When you restart your system, your computer will be scanned for errors and will try to correct them.

  then

  Click Start
  Type: CMD, according to the results, right-click CMD
  Click on "Run as Administrator"
  At the command prompt, type: sfc/scannow

  This will check for any breach of integrity

  Restart your system

  ----------------------------------

  You can create a new user account and see if the problem exists when you try to stop this user account.

• I have problems turning on my computer, sometimes I have it turn on and off the hard path of startup. Because it goes to the system again and then a blue screen. What is the hard drive?

  I have to leave my computer on to avoid having to turn it off with the power off button.  Otherwise, I have to turn on & off with the power button.  When I do that he will go to start windows normally or delete files and go to the system restore. When I hit windows normally it will go to a blue screen with the cursor at the top left doesn't Flash and that's it.  So, I press the power button to continue until initialization starts normally.

  Hello

  1. You did it last changes before the show?
  2. What is the error message/code what do you see with the blue screen?
  3. What is your operating system?
  4. Are you able to boot to the desktop?

  The steps below apply to Windows 7:

  Resolve stop (blue screen) error in Windows 7

  http://Windows.Microsoft.com/en-us/Windows7/resolving-stop-blue-screen-errors-in-Windows-7

  Note: Make sure that you back up your data.

  Important: The data available on bad sectors may be lost when chkdsk attempts to repair your hard drive.

  Step 2) click on the link below to provide newspapers:

  What are the information contained in the logs of the event (Event Viewer)?

  http://Windows.Microsoft.com/en-us/Windows7/what-information-appears-in-event-logs-Event-Viewer

  Step 3: Run a virus scan:

  Microsoft safety scanner

  http://www.Microsoft.com/security/scanner/en-us/default.aspx

  Note: If infections are detected during the scan, there is a risk of data loss because infected files will be deleted.

  It will be useful.

• PC won't start at all, and when I try with the recovery cd, I get blue screen

  ORIGINAL TITLE: Help me please

  My toshiba satellite p200-123 moel is any commissioning and when I try with the recovery cd I get a blue screen, also I can't start safely mode.the error message I get is... the file is maybe corrupt.the the file header checksum does not match the checksum calculated... help pleasseeee

  Hello

  You are booting from the recovery disk?

  You need to change the Boot order to make the DVD/CD drive 1st in the boot order:

  How to change the Boot order in BIOS:

  http://pcsupport.about.com/od/fixtheproblem/SS/bootorderchange.htm

  If you continue to have problems with the help of Toshiba recovery disks, you will need to contact Toshiba.

  As you get a blue screen, you may have a hardware problem.

  Toshiba support:

  http://www.CSD.Toshiba.com/cgi-bin/TAIS/support/JSP/home.jsp

  You can also try the free Toshiba Support Forums:

  http://forums.Toshiba.com/

  See you soon.

• Can someone help me with this? I get a blue screen.

  Signature of the problem:

  Problem event name: BlueScreen

  OS version: 6.1.7601.2.1.0.256.48

  Locale ID: 1033

  More information about the problem:

  BCCode: 116

  BCP1: 889C 8510

  BCP2: 95D25BE0

  BCP3: 00000000

  BCP4: 00000002

  OS version: 6_1_7601

  Service Pack: 1_0

  Product: 256_1

  Files helping to describe the problem:

  C:\Windows\Minidump\071913-29015-01.dmp

  C:\Users\Chris\AppData\Local\Temp\WER-174281-0.SysData.XML

  Read our privacy statement online:

  http://go.Microsoft.com/fwlink/?LinkId=104288&clcid=0x0409

  If the online privacy statement is not available, please read our offline privacy statement:

  C:\Windows\system32\en-US\erofflps.txt

  Hello

  You try to run the steps in the following link.

  Resolve stop (blue screen) error in Windows 7

  http://Windows.Microsoft.com/en-us/Windows7/resolving-stop-blue-screen-errors-in-Windows-7

  Warning of CHKDSK
  Important: when running chkdsk on the drive hard if bad sectors are found on the disk hard when chkdsk attempts to repair this area if all available on which data may be lost.
  Note: make sure that you back up the data before proceeding with the disk check.
  For more information about how to back up and restore the registry, follow the steps from the following link:
  Back up the registry
  http://Windows.Microsoft.com/en-us/Windows7/back-up-the-registry

  Note: skip step Reinstall Windows 7 from the link above.

  I hope this helps.

• Are there anyone experiencing problems of DPS with HTML resources on iOS8?

  We have a resources HTML pdf file which works fine in iOS7, but the inline browser comes in white with launched in iOS8. We tested with a folio 31 and a folio 27 iOS8.

  It is a known issue, it will be addressed in our version v32 expected in a little less than a week.

  Neil

• I'm trying to sync my iPad with my laptop. When I connect my iPad to my laptop, I get a blue screen and my laptop stops.

  I have iTunes installed on my laptop

  .

  Get code error on their website or contact Apple technical support.

• Problem connecting wireless with my Tecra A8

  Hello

  I have problem connecting WiFi with my laptop Tecra A8. When I opened my laptop, it does not connect to the wireless network.
  I tried several ways to solve this problem.
  I updated for active connections, then I click on the Connect button after you select my wireless LAN, but it doesn't connect.
  Or I restart my computer, but it doesn't connect.
  However, it connects to the network wireless in anytime after about 15 minutes.

  Also when I tried to connect to the network wireless at home, but I couldn't t connect. I removed the password for the connection. Then I connected without any problem.
  I wonder that there is no problem with installation? Or my wireless card doesn't work?
  Can someone help me?

  Thank you

  > Also when I tried to connect to a home wireless network, but I couldn't t connect. I removed the password for the connection. Then I connected without any problem.

  According to the statement, all looks like that you try to use a password for encryption wrong!

• Pavilion zv 5000: problems s-video with windows 7 on hp pavilion zv 5000

  I have a HP Pavilion zv5000, and I recently installed windows 7 as my operating system. The original operating system was Windows xp. Since I installed windows 7 s-video I use to connect to my tv no longer works and don't my cd/dvd on my laptop. Is it possible to reinstall the XP of origin on the laptop? There was no recovery disk came with the laptop. Or y at - it all the drivers that I can download to run s-video using Windows 7? Any help will be much appreciated.

  Hello:

  Please note the product number for your zv5000 so I can see what are its characteristics and then see if there is a driver for W7 compatible graphics for your model.

  What the CD/DVD drive not working?  You must have used it to install W7.

  Here is a guide to where to find the product number for your laptop...

  http://support.HP.com/us-en/document/c00033108

• 11.0 Adobe goes to blue screen and is now a flicker of the screen

  When I run adobe 11.0 that is loaded on the terminal, that he goes to the blue screen and now my screen flashes.   What should I do?

  Hi Bob,

  Thanks for posting in the Microsoft Community Forums.

  It would be more useful, me if you answer these questions.

  1 Windows operating system you are using?

  2. are you blue screen only with the Adobe program?

  I want the season to follow the article provided to solve the problem.

  Resolve system errors, freezes | Windows | Adobe software

  http://helpx.Adobe.com/x-productkb/global/troubleshoot-system-errors-freezes-Windows.html

• Blue screen after update KB2982791 problems

  I have a Windows 7 update to Windows 8 64-bit.

  Blue screen (Stop 0 x 50) after you apply update KB2982791 for Windows 7 Home Premium 64 bit is also valid for the W7 to W8 update?

  Original title: This applies to uppdated Windows7 to Windows8

  Hello Nils,

  Thanks for posting your query in Microsoft Community.

  I understand that you have problems with this particular update (KB2982791) after which there are blue screen in the computer. We are happy to help you in the matter of fixing.

  You can follow the following suggestions to solve the problem as soon as possible.

  First of all, try to follow the link below to learn more about the update.

  MS14-045: Description of the update of security for kernel-mode drivers: August 12, 2014

  http://support.Microsoft.com/kb/2982791/en-us

  In addition, the blue screen (Stop 0 x 50) could also related material being. This can occur after installing faulty equipment or failure of the installed equipment (generally associated with a faulty RAM).

  In addition to the advice provided, try to run the Diagnostics memory test to check memory problems. See the link for the same mentioned below.

  How will I know if my computer has a memory problem?

  Additional information:

  Resolution of errors blue screen in Windows

  Note: When you use Sys tem Restore to restore the computer to a previous state, programs and updates that you have installed are removed.

  Important: When running Chkdsk on the drive hard if bad sectors are found on the disk hard when Chkdsk attempts to repair this area so all available data on this risk be lost.

  I hope this helps. Otherwise, feel free to write us again and we will be happy to help you come.

• Satellite L20 error: DVD - RAM crashes with a blue screen with the use of cd-audio

  Hello world

  I have a very annoying problem: when I use audio-cd, my Satellite tends to crash with a blue screen. When it crashes, blue screen, scrolls and immediately a black screen and a restart follows.

  It is probably a driver problem, because I have three audioprograms installed (Windows Media player, Sonic Stage MiniDisc and I-tunes).

  Can someone give me advice? Thanks in advance

  Klaas

  Hi Klaas,

  It would be useful to know what the error message is when you get the blue screen. I suggest that you disable the restart automatic installation so that your laptop stops on the blue screen and you can read the error.

  To disable the auto restart: -.

  1. right click on 'My computer' icon and then click on "Properties".
  2. click on the "Advanced" tab
  3. click on 'Settings' in the section starting and recovering (towards the bottom of the window).
  4 uncheck 'automatically restart '.

  Please post again all the details of the blue screen error message.

  concerning

• Blue screen (BSOD) and communicate with GPIB instruments

  I have a communication problem with a Pressuregenerator of PCS400 of Mory via NI-VISA. My simple application sends requests to the instrument and reads returned responses. These actions are performed in a while loop until you press the stop button on the front. The VISA-resource is initialized before the while loop and closed after leaving the loop.
  Now the problem is that the computer will work in a blue screen with the message "NMI: check / memory parity error parity." This blue screen can be caused by switching between the programwindow and another window (for example the file Explorer) - I know it sounds strange. Then the blue screen appears after about 20 seconds. The computer worked stable in the daily work with windows.

  I have already tried several things
  -Wait a while (up to 30 ms) after writing and reading of VISA-online blue screen
  -Communicate with the Agilent 34401 multimeter with the same program (but other requests of course)-online no crash!
  -Test memory on system for about 45 hours with memtest86 + -online no found error
  -Stresstest with Prime95 (product 100% of CPU load) for about 1.5 hours on windows => no crash

  Request sended:
  _PCS4\sREADING? \n
  _PCS4\sERR? \n
  _PCS4\sSTAT? \n
  _PCS4\sERR? \n

  The system is configured as follows:
  -Windows XP Professional SP3
  -LabVIEW 8.5 FDS
  -NI-VISA, NI-VISA run-time V4.2 V4.2
  OR-488. 2 V2.52
  -Adapt PCI-GPIB with 3 x Mory PCS400 Pressuregenerator (1.3 to addresses), Agilent E3641A (address 5) and Agilent 34401 connected (6 addresses)
  -Acquisition of data PCI-6052E card
  -Some RS232 (PCI) expansion cards

  Do you have any ideas of how this strange problem?

  Thank you.