Bug: the camera can not initialize

Similar Questions

• Excite - AT10PE - camera can not focus the image correctly

  When you use the camera, sometimes that can put the image incorrectly.
  You have it too?

  My screen AT10 has a slightly reddish. I used the 'filter your screen', but it is not fair. Addressed to someone?

  After that update to version 4.3 takes the focus is still wrong - fixfocus - infinite - cannot be set. Missing manual calibration. When I put infinity, should be on the horizon. But it's not. It's good to see the apk mobilwebcam or KennyCamera.

  In addition, the camera does not work with the exhibition.

  Oh, another discovery. When the camera lens lend a lens with a focal length of 200 mm, so the focus to infinity corrected at once:-o. As the lens on the tablet had the focus more than necessary!

• After 10 Windows Installer on Audio SW5-11-18R3 and the camera will not work. How can I fix?

  Tried the upgrade of Windows 10 initially, but it failed with "lack of disk space", then installed full media and all but the Audio and the camera does not work.

  Hi all

  I would just like to make the point that there is a fix that has been made available and applications for a Windows Update is also underway. I'll link directly to the file located on our page drivers and downloads.

  
  
  
  
  
  
  
  
  
  
  
  
  

  Patch

  Acer

  1. fix camera function fail after upgrade to Win10 TH2.

  20160506

  91.7 MB

  30/05/2016

  Download

  Thank you
  Cory

• Camera slider bug? When I press 'C' the cursor of the camera does not instantly change on the screen. Why?

  When I press 'C' the cursor of the camera does not instantly change on the screen,

  only after that I moved my mouse t - it change. Why is this?

  This is fixed in the 2014.2 effects after update (13.2), which is now available.

  Details here: http://adobe.ly/1IVopxh

• the Task Manager won't start don't no error "the application could not initialize properly (0xc0000006.

  I've heard fans speed medium speed and high when I don't do anything that would require heavy resources. I tried the two Ctrl-alt-delete and right-click in the taskbar, and it fails to start. "The application could not initialize properly (0xc0000006). Click OK to close the application. "I click OK and it pops up again and then I click OK again and it goes.

  I ran AVG and Spybot in safe mode with network but nothing detected... and you erased my memory of page file also.
  It is simply damaged or make me a bug/virus.
  HP D220 desktop model

  Ok. What I wanted to say, this is so that YOU can see the file, you must be able to view hidden and system files. Windows will however see the file any if YOU can see it or not.

  In autoruns, in my opinion, you have not clicked on 'options', then 'Filter Options '.
  Make sure that all check boxes are cleared in 'Filter Options '.

  Tomorrow, I would like for you to delete infected tasks Manager by HP. And copy the Dell2 for HP-infected Task Manager. Just in case the task manager has been infected and start actually malware.

  So, tomorrow,

  -Alex

• Setup error Application-"the application could not initialize properly (Oxc0000135). Click on OK to terminate the application. »

  Had this feature Sharper Image 5 days weather for Christmas and of course we have over-paid for her-$50 bed bath & beyond.  I'm not as technical as most of you, but I am unable to even get the software to install.  I get an application error installation "the application could not initialize properly (Oxc0000135).  Click on OK to terminate the application. "I got the Version 1.01 in the box (and it does not say is the app forecast 4 days) and am running XP.  Thanks in advance for any help - of course, the is Helpline is to give an ambiguous 'we are closed for the holidays' without parameters for the last seven days... Grrr...

  Sure that the error occurs when you don't have a .NET framework is installed on your system. You can download/install here: http://www.microsoft.com/download/en/details.aspx?displaylang=en&id=26

• lsasss.exe - application error "the application could not initialize properly (0xc0000006).

  Hi I was wondering if someone out there could help,

  My laptop is a packard bell Windows xp, when I turn on the laptop it does not completely load, it will take me to a black screen with the error message error lsasss.exe - request "the application could not initialize properly (0xc0000006). Click OK to close the application. But when I click ok nothing happens except disappears from the message bar and im left with a black screen. can someone tell me what to do?

  Hi beavarney,

  ·        Do you remember any changes made on your computer before the show?

  Security Authority Subsystem Service LSASS (local), is a process in Microsoft Windows operating systems that is responsible for enforcing the security policy on the system.

  Method 1:

  I suggest to start the computer in safe mode, you can check the link for the steps below: a description of the options to start in Windows XP Mode: http://support.microsoft.com/kb/315222

  Method 2:

  If you are unable to start the computer in safe mode then try last known good configuration. Link: How to start your computer by using last good known Windows XP Configuration: http://support.microsoft.com/kb/307852

  With regard to:

  Samhrutha G S - Microsoft technical support.

  Visit our Microsoft answers feedback Forum and let us know what you think.

• WVC210 display of the camera does not

  Hello

  I have a wvc210, the small LCD screen on the camera does not do anything, so I can't determine what IP it works stop. The lights work and it starts ok.

  Any suggestions?

  Hello

  First of all, I'm sorry that you are having problems with the camera.

  My first recommendation would be for you to contact the support center at 866-606-1866 so that we can determine if the device is under warranty and replace it.

  If that's not an option, or you already know the product is supported and given that the device works properly, what you can do is look in the DHCP table and find the MAC address of the camera, in this way you now the IP address that uses and will be able to connect to it.

  In addition, if it is not an option, you can download a network scanner (several free on the internet, as always, Google is your friend), the scanner and find the MAC address.

  Once you have found the address, connect to the device and assign a static IP address so you will always know how to access.

  I hope that was helpful.

• When a user logs off Windows 7 x 64 session, the rest can not access the internet until the restart network card

  Hello! I found a problem with my system: when a user logs off Windows 7 x 64 session, the rest can not access the internet, until restarted network card. Reinstall NIC driver did not help. Problem appears on a built-in adapter, in the motherboard and a separate PCI card too.  Same router via its web interface is not accessible. Windows cannot automatically fix this problem after trying to diagnose a problem with his problem Diagnostic tool. After the diagnosis in the DETAILS window, MORE tests, it displays a message like this "computer remote can not receive a connection via the Internet (HTTP) Service Port". "Unplugging" a corresponding Local network connection and then reconnect solves the problem immediately. Switching between users, when two of them are connected do not cause this problem. Important: the problem occurs in the account of the user who was logged on the system FIRST after the PC was on, when the user disconnected on newspapers of a SECOND. If the SECOND user is logged in and the FIRST user disconnects, SECOND can still access the internet. It depends only on the sequence of the user's record, not on the particular user name. And one more interesting fact: after each user registered on and outside just for once, the problem seems to disappear until the PC is turned off and turn it back on!

  System details:

  Motherboard: ASUS P8Z77-VLK
  CPU: Intel Core i7 3770 K
  RAM: 8 GB
  OS: Windows 7 x 64

  Hi, Mahesh,

  and thank you very much for your help! Update firmware driver and router LAN did not help me get rid of my problem, but greatly improved my experience of networking in general. Anti-virus software was not guilty, also, but! I found the "iControl" network software, installed as part of Sogiciel 'AI Suite II' (that came on the CD of motherboard ASUS driverssoftware), runnning and causing not only the problem mentioned above, but would also decrease upload speed up to 0.3 MB/s, when download passes to nearly 100 Mbps! Moreover, searching the Internet, I have found a lot of complaints about the behavior of this software, so that people watch you the occasional installation of this piece... sweet ;) As "iControl network" has been uninstalled (not only turned off in the settings of 'Ai Suite II'!), I'm totally happy with my system performance.

  Best regards
  Greg

• Sony Mini DV DCR-TRV18E camcorder to my computer laptop 64 bit Windows 7. The camera is not compatible with this version of Windows.

  I can't connect my Sony Mini DV DCR-TRV18E camcorder to my computer laptop 64 bit Windows 7. The camera is not compatible with this version of Windows. Does this mean that I can't import my old videos? Thank you.

  Yes, this says it's not compatible. So I don't think it'll work in Win7. There a firewire connection? If this is the case you can use it if the laptop has firewire top. All you need is a cable

• After a crash during the installation of Captivate, the installer does not "initialize" and the installation process stops. Any suggestion?

  I bought a few days ago from "Captivate". I received the Web address to download the program and the activation number. I downloaded the program (OK), began the installation program (OK) and has received indications that the decompression process was OK. Then the installation has begun, and I was asked to introduce the activation number (OK). After that, a bar showing the progress of the installation was shown on the screen. The bar stops at 2%. I waited more than 20 minutes and not seen any progress. So I decided to start the "task manager" to see if the process was active. I have windows 7, so I pressed ctrl-alt-del and the message (2-5 min later) who was not able to start the Task Manager. I waited longer (more than 1 hour), and since the progress of the installation the indicator was still 2% and I still couldn't activate the Task Manager, I restarted the computer.

  I then tried to reinstall the program. After unpacking, I get the message: "could not initialize installation. Please download Adobe support advisor to detect the problem. I followed the link to find out that the program is no longer available.

  What should I do?

  Hello

  Please follow the steps down below.

  • Disable the startup items. (Ms config)
  • Rename the the below mentioned location OOBE folder.
  • Windows: C > Program files or program (x 86) > common files > Adobe > OOBE and rename the folder in OOBE as (OOBE_old).
  • Uninstall Adobe Captivate 8 components manually from the machine. Manually remove all the files Adobe Captivate and records. You can check the following locations.

  o C:\Program Files\Adobe

  o C:\Program Files\Common Files\Adobe

  o C:\Program Files\Common Macrovision Shared

  o C:\Program Files (x 86) \Adobe*

  o C:\Program Files (x 86) \Common Files\Adobe *.

  o C:\Program Files (x 86) \Common Files\Macrovision shared

  o C:\ProgramData\Adobe*

  o C:\ProgramData\FLEXnet

  o C:\Users\\AppData\Roaming\Adobe*

  o C:\Users\\AppData\Roaming\com.adobe.*

  o C:\Users\\AppData\Local\Adobe*

  o C:\Users\\AppData\LocalLow\Adobe*

  o C:\Users\\AppData\Local\VirtualStore\Program Files\Common Adobe

  • Create a new user account that has admin on her rights.
  • Restart the computer.
  • Connection to a user account.
  • Once you are connected, and then try to install it again.

  Kind regards

  Rajeev.

• Updated to the Mavericks and obtain the following: could not initialize Photoshop because of a program error

  Updated to the Mavericks and obtain the following: could not initialize Photoshop because of a program error

  I tried all will set them on the web that I can find is Trash the Prefs, shift when it is open and plug-ins stop, download Java Update, deleted and reinstalled

  My business is to stop can't find a fix from Apple

  Did you run the vacuum after you have uninstalled and before reinstalling?

  -http://helpx.adobe.com/creative-suite/kb/cs5-cleaner-tool-installation-problems.html

  AND JUST FOR MAC USERS - some links 10.9.x

  the following link tells After Effects, but check YOUR permissions.

  -http://blogs.adobe.com/aftereffects/2014/06/permissions-mac-os-start-adobe-applications.ht ml

  -Mac 10.9.4 and OpenCL number https://forums.adobe.com/thread/1514717

  -Mac 10.9.3 workaround https://forums.adobe.com/thread/1489922

  -more than Mac 10.9.3 https://forums.adobe.com/thread/1491469

  - and https://forums.adobe.com/thread/1507936

• I get all the time can not download anything 'Windows cannot access the specified device, path or file. You can't have the permissions to access the have__appropriate element. »

  Original title: problems cannot do anything

  Windows cannot access the specified device, path or file. You can't have__appropriate the permissions to access the item. I get it all the time can not download anything

  Hi birdylod,

  ·         What version of the operating system is installed on the computer?

  ·         You did changes to the computer before the show?

  ·         You use Internet Explorer? If so, what version are you using?

  ·         What files you download?

  Follow these methods.

  Method 1: Performs a search using the Microsoft safety scanner.

  http://www.Microsoft.com/security/scanner/en-us/default.aspx

  Note: The data files that are infected must be cleaned only by removing the file completely, which means that there is a risk of data loss.

  Method 2: Follow these steps:

  Step 1: Start the computer in safe mode with network and check if the problem persists.

  Startup options (including safe mode)

  http://Windows.Microsoft.com/en-us/Windows7/advanced-startup-options-including-safe-mode

  Step 2: If the problem does not persist in safe mode with networking, perform a clean boot to see if there is a software conflict as the clean boot helps eliminate software conflicts.

  Note: After completing the steps in the clean boot troubleshooting, follow the link step 7 to return the computer to a Normal startupmode.

  Method 3: Scan the file system (CFS) auditor to repair corrupted files.

  How to use the System File Checker tool to fix the system files missing or corrupted on Windows Vista or Windows 7

  http://support.Microsoft.com/kb/929833

  For reference:

  What to know before applying permissions to a file or folder

• Does anyone know how to connect a Garmin GPS to the EOS 7 d? The camera does not see.

  When I plug in my Garmin GPS on my EOS 7 d and go into the GPS settings in the menu. The camera does not see all I get is "GPS not connected indication." The GPS turned on and functional. Someone at - it ideas?

  Once I had an application that you had photographed the display of a GPS device (the type that a rider could use because they observe "breadcrumbs" trail of your itinerary) on #1 chassis (they wanted to just make sure that you have a picture of the time on the GPS display.

  You then go about your day taking photos with the GPS running indepdently.

  At the end of the day, you import the images and it asks you to enter the time displayed on the first photo.  It uses the display of GPS time and calculates the offset of the time, the camera recorded in the EXIF data (just in case the clocks were not perfectly synchronized).  Then she uses the breadcrumbs on the GPS track and apply the GPS position, data for each photo from your camera roll.

  It was a bit complicated and app tried to take over your App "photo management" (which I didn't... "I wanted just the position data added to the existing images), but it worked.

  The fact is... I was able to add correction of position information to each photo and it did not require actually integrate the GPS to the camera (it was quite after the fact).

  Today, I own the module GPS Canon (MUCH more convenient), so I don't deal with that more.

  hikeray2 wrote:

  When I plug in my Garmin GPS on my EOS 7 d and go into the GPS settings in the menu. The camera does not see all I get is "GPS not connected indication." The GPS turned on and functional. Someone at - it ideas?

• My HP Photosmart Premium is saying "preparing the printer can not be interrupted. Please wait... "What is happening?

  My HP Photosmart Premium is saying "preparing the printer can not be interrupted.  Please wait... "What is happening?

  http://h30434.www3.HP.com/T5/scanning-faxing-and-copying/HP-Photosmart-premium-error-message/TD-p/1470957

  HP support

  Edit:

  I know that maybe it's a little late to come and see this post was several months ago, but I had the same problem.

  I ended up turning off the machine and opening printer and check the ink cartridges (I had seen just to find the part number for a new cartridge).  I found that the blue cover which snaps into place on the ink cartridges was broken not closed completely.  This has caused the printer constantly tries to go into maintenance mode, but it could never align cartridges.  She also told me that there is a paper jam, even when there is no paper in the machine.  I even let the maintenance run all night without success.

  Once the cartridges have been broken in place and the blue cover has been fully guaranteed, the printer worked.

  above compositions of this thread:

  http://h30434.www3.HP.com/T5/eprint-print-apps-mobile/HP-OfficeJet-Pro-8500A-plus-printer-is-stuck-in-maintenance-mode/TD-p/1207907