Bugs in the installer

Similar Questions

• Creating cloud - BUG change the installation directory for applications

  I searched and could not find this similar post here

  http://forums.Adobe.com/message/5498967#5498967

  Who stated the issue I am experiencing.  In the program office cloud creative preferences, I changed the D drive installation directory because I have my main hard drive partitioned and programs would take too much space on C.  Whatever the change in preferences, applications were still installing on my C drive.  I tried to restart and reinstall and nothing seemed to work.

  Finally, I decided to reassign my D partition to C, I must still complete this because I'm waiting for all the data on D to be transferred to an external drive, so I can recombine it in C without losing any data (I don't know if this is necessary, I have not recombined partitions in the front operating system (, but just to be sure)

  IN ANY CASE

  As I am awaiting transfer (more 120gbs takes a while) I changed the installation directory in the preferences of creative cloud to C and went ahead and installed the program I wanted to before all this.  Guess what?  It is installed on my D drive!

  This isn't a serious bug for me, just incredibly boring and causing a lot of extra work on my part just to install the program I wanted to.  However for someone who requires a different install directory to and cannot reorganize their computer to take account of this bug, I could see that she is more serious.  If anyone else has had this problem and found a solution?  Thank you.

  Adobe PS rock you, I hope that your other programs CC feel not hurried to immediate as does your Installer

  Thanks for the update Julie.  It is information that you have been able to install applications for the location on the D: drive.  Shared resources and temporary installation files will continue to be on the C: drive.  Please maintain enough disk space on your drive to allow installation of the necessary updates.  In general, I'd recommend at least having double the amount of free space on your system drive, to the amount of physical RAM, you have installed on the computer.

  You can find the system requirements for Adobe applications, and an indication of the disk space required for installation, system required. Creative cloud.

• Bug in the installation of Dreamweaver CS4

  I downloaded Dreamweaver CS4 installation files. All unpacks very well, but when I run the installer, verification of configution of the system is done correctly, but I can't go beyond the Welcome screen. [Windows XP SP3, office space, a large disc of Dell, etc.]
  
  (Apparently), there are two options on the Welcome screen:
  (1) I have a serial number for Adobe Dreamweaver CS4 (with a set of boxes for the entrance of SN)
  (2) I want to install and use Adobe Dreamweaver CS4 on an experimental basis
  
  Unfortunately, there is no visible way to SELECT the option of trial. Two buttons are available, quit smoking and next. When I select next, a pop-up window says "enter serial number or select install the trial." Since there is no way to select the test facility, my only option is to quit smoking.
  
  If I tab in the Welcome window, a little invisible box is highlighted next to the installation of the trial option, but I can't change or enter anything to change. Any ideas on how to work around this problem?

  BW ~ Merlin.

  You're a magician. Space bar was all it took to make the selection. It was still invisible, but I was able to successfully complete the installation. Thank you very much.

  Yet, I'm sure that's not what developers anticipated. I hope it's something funny on my machine configuration and not a widespread problem.

• Bug from Microsoft which blocks the installation of McAfee Security Suite

  Verizon and McAfee tec support worked with a problem on my pc, it just got a new hard drive and a new installation of XP installed, not to mention the 200 updates, including service packs 1,2,3. I never had no problems installing or running the McAfee products until 17 days ago. Between myself, McAfee and Verizon tec support, McAfee Security Suite has been reloaded 48 times. During each load, not an error or warning appears, the hard drive acts like it is written for and downloads are all successful, when you close the installation following the instructions once the installation completes, it not there no trace of McAfee on the hard drive accept for some temporary files and some registry entries.

  After the last attempt to McAfee to install a new problem exists, during the verification of your license and your password, bothe the name and the password are incorrect. I have 2 other PC running XP both have Security Suite installed on them and they would be well if the bug was introduced as reciently like 2 months ago, some first encrypted in Microsoft updates, I discovered that more then a thousand other people have this problem.

  We used highly som software sofisicated of security registry and found no bugs, we used as several other safety analysis software on this pc and found nothing so it's new and directly to McAfee as other security software, for example. Norton, work very well. I would suggest to Microsoft to go threw your online updates and find a worm attached to one or more updates that activates this question. I have went up to now download the setup of each update of Microsoft and ran an individual scan on each update but nothing has been found that is why I really think it's the combination code through a number of updates that creates this bug and bring it to life.

  Only Microsoft has all the updates with the original code, they must go threw each update and find the configurations added / changed on their updates to resolve this problem, I would muself, but I'm not entittled to access the database of Microsoft where the original code was stored and compare it to the code distributed by Microsof'ts 'SECURE UPDATE DATABASE ".

  DOES ANYONE HAVE A LIST OF A LINK THAT HAS MICROSOFT WHO CAN RUN A SCAN ON THEIR SOFTWARE FOR ERRORS LIKE NO OTHER SECURITY SOFTWARE DETECTS MICROSOF'TS UPDATES THAT ARE CURRENTLY ON THE WEB NEXT TO THE ORIGINAL SOFTWARE SAVED ILS?

  Hi Paul,.

  You can post your suggestions/comments about the same on the Microsoft Connect Web site.

  Microsoft products accepting Bugs and Suggestions | Microsoft Connect

• cannot restart the computer after the installation of el capitan 10.11.3

  After installing el capitan 10.11.3 on my iMac intel with lyon, my screen is gray and I can't restart.  I lost the free memory.  Help!

  Please take each of these steps that you have not already tried it. Some of them are not applicable to your model or your situation. Stop when the problem is resolved.

  To restart a computer is not responding, press and hold the power button for a few seconds until the unit turns off, then release, wait a few seconds and press again briefly.

  Step 1

  The first step to respond to a startup failure is to secure data. If you want to keep the contents of the boot drive and you have not already at least a current backup, you should try to back up now, before we do anything else. It may or may not be possible. If you don't care the data changed since the last backup, you can skip this step.

  There are several ways to back up a Mac that is unable to boot. You need an external hard drive to store backup data.

  a. starting the partition recovery or an hour Local Machine backup volume (button option key at startup). When the OS X Utilities appears, launch disk utility and follow the instructions in this support articleto the title of the "Instructions for the backup on an external hard drive via disk utility". The article refers to the start of a DVD, but the recovery mode procedure is the same. You don't need a DVD if you use OS X 10.7 or higher.

  (b) If step 1 fails due to disk errors, and no other Mac is available, then you may be able to save some of your files by copying them in the Finder. If you already have an external hard drive with OS X installed, the start of it. Otherwise, if you have access to the Internet, follow the instructions on this page to prepare the external hard drive and install OS X on it. You will use the installation program of recovery, rather than download it from the App Store.

  c. If you have access to a Mac, and it work and have both the non-working Mac FireWire ports or stroke, start the Mac non-working in target disk mode. Work Mac to copy the data to another drive. This technique will not work with USB, Ethernet, Wi - Fi or Bluetooth.

  d. If the internal drive of the non-working Mac is replaceable by the user, remove it and climb into a docking station that is pregnant or an external drive. Use another Mac to copy the data.

  Step 2

  If you have booted from an external drive, make sure that the internal boot volume is selected in the pane of the system preferences Startup disk.

  Start in safe mode. Note: If FileVault is enabled in OS X 10.9 or an earlier version, or if a firmware password is defined, or if the boot volume is a software RAID, you can not do this. If you do not see the words "Safe Boot" in the start screen, you did not start in safe mode. Ask for additional instructions.

  Safe mode is much slower to boot and run as normal, and some things don't work at all, including the networks without wire on some Macs.

  The login screen is displayed even if you normally connect automatically. You must know the password for the connection to connect. If you have forgotten the password, you will have to reset it before you begin.

  If the startup progress bar gets stuck for more than a few minutes, or the system stops automatically when the progress bar appears, the boot volume is corrupted and the player is probably defective. In this case, go to step 9. If you have another problem with the player, replace it immediately.

  If you can start and log in in safe mode, empty the trash and then open the window of info on the boot volume ("Macintosh HD", unless you have given it a different name.) Make sure you have at least 9 GB of space available, as shown in the window. If you do not, copy as many files as necessary on another volume (not another folder on the same volume) and delete the originals. Deletion is not complete until you empty the trash again. This, until the space is more than 9 GB. Then restart as usual (i.e., not in safe mode.)

  If the boot process hangs again, the problem is probably caused by third-party software you have installed. Ask for additional instructions.

  Step 3

  If the startup process stops at a gray screen together with a mobile cursor, then the logon dialog box may be active but not visible because of a bug. You may be able to connect by using the arrow keys or the cursor to select the password field and type your password as usual.

  Step 4

  Case of failure of step 3, the boot volume can be complete. If you saw previously implemented guard space drive is low, it is certainly the case. You might be able to start in safe mode , even if you cannot boot normally. Otherwise, boot from an external hard drive, or well technology for step 1b, 1 c or 1 d allows to mount the internal drive and delete some files. According to the documentation from Apple, you need at least 9 GB of free space on the boot (as shown in the Infolog) for normal operation volume.

  Step 5

  If a Mac desktop (without the built-in keyboard) crashes on a gray screen together with a mobile cursor, the keyboard may not be recognized. Hold down the button on the side of a wireless Apple keyboard to make it discoverable. If need be, replace or recharge the batteries. If you use a USB keyboard connected to a hub, connect it to a built-in port.

  Step 6

  Sometimes, a startup failure can be solved by resetting the NVRAM.

  Step 7

  If there is an integrated optical drive, a disk may be stuck in there. Follow these instructions to remove it.

  Step 8

  Press and hold the power button until the unit turns off. Disconnect all devices wired except those needed to start and remove all aftermarket expansion cards. Use another keyboard and/or mouse, if these devices are wired. If you can start now, one of the devices that you disconnected, or a combination of both, the origin of the problem. Discover that it is a process of elimination.

  Step 9

  Launch the utility disk in recovery mode (see step 1). Select the boot volume, and then run the repair disk. If problems are found, repeat until that clear. If disk utility reports that the volume is not repairable, the drive is defective and must be replaced. You can choose to tolerate such malfunction in the reader's life. In this case, delete the volume and restore it from a backup. If the same thing happens again, replace the drive immediately.

  It is one of the rare situations where you must also run repair permissions, ignoring the erroneous warnings, that it can produce. Look for the line "Permissions repair complete" at the end of the output. Then restart as usual.

  Step 10

  If the boot device is an aftermarket SSD, it may have an update and/or a forced "garbage collection". Instructions how to do this with a Crucial SSD of brand have been posted here. Some of these instructions may apply to other brands of SSDS, but you should check with the technical support of the provider.

  Step 11

  Reinstall the OS. If the Mac has upgraded an earlier version of Mac OS X, you need the Apple ID and password used to upgrade.

  Step 12

  Do as in step 11, but this time clear the disk utility boot volume before installing. The system should restart automatically in the installation wizard. Follow the prompts to transfer data from one Time Machine or another backup.

  Step 13

  This step applies only to models that have a battery logic-board ("PRAM"): all of the Mac Pro, MacBook with a removable main battery and a few others (models not updated). A flat battery logic-board may cause a boot failure. In general the failure will be preceded by the loss of the system and boot disk clock settings. Refer to the user manual for replacement instructions. You may need to take the machine to a provider of services to have to replace the battery.

  Step 14

  If you get this far, you probably deal a hardware failure. An appointment of 'Genius' to an Apple Store, or select another authorized service provider.

• Since the installation of El Capitan, my streaming to my Audioengine DAC D2 cut after 12 minutes (the default duration of sleep). It will restart by pressing the space bar. When I change the duration of sleep, the cut outs are becoming more frequent and i

  Since the installation of El Capitan, my streaming to my Audioengine DAC D2 cut after 12 minutes (the default duration of sleep). It will restart by pressing the space bar. When I change the duration of sleep, the cut outs are becoming more frequent and intermittent. Help?

  I checked the wifi and changed frequency (new modem, frequency change made no difference). The Board battery seems fine - all updates well. My computer is an iMac (2011), 3.1 GHz Intel Core i5, 8 GB 1333 MHz DDR3, with a new AMD Radeon graphics card. I recently installed a State strong 1 TB SATA drive and fitted with a LaCie Porsche 4 to USB for backup and a 4TB disk storage RAID LaCie drive.

  I'm frustrated, having to come in my computer since my living room every 12 minutes to continue to listen to Spotify on my stereo system.

  My guess is there a bug in the software of sleep in El Capitan, which disrupts his (I've tried different USB ports connect the Audioengine sender and same thing).

  Should I go back to Yosemite?

  Turiteaguy

  First of all, 10.11.3 OSX just came out. Try this.

• Failure of the installer: NIPathsDir property NISHAREDDIR is not defined

  I have another problem with the installer. The user gets

  "Fatal error!" The required NIPathsDir NISHAREDDIR property is not set.

  during the installation of Windows 7 Ultimate in Parallels (!).

  I have posted the file install_log_ian64.txt on the incoming FTP server. Froom what I see there is a defined NISHAREDDIR64 but not NISHAREDDIR. Is it a bug in 32 bit 64 vs in the installation program, or a quirk in Parallels?

  Thank you

  Ian

  Hi Ian,

  It seems that your username has faced a form of this question. In his case, there are several places of Windows (probably my pictures, My Documents, etc.) pointing to an inaccessible network location: \\.psf\home\*

  This is a limitation of many installers of Windows which must validate all paths to system at installation time. I hope that your user can make this accessible network location or, if not, change the system paths to point to something else to change in HKEY_CURRENT_USER folders.

  Luis

• Unable to start the computer after the installation of Windows updates

  original title: same problem with the other oddities.

  I also have a computer down the update.  Although I tried several times to start the computer from the installation CD re, when I get to the page where I have options to fix or exit, locks from my computer to the top and will go no further.  Suggestions how to get the computer to boot the CD and allow me to choose the repair option without locking up?  Thank you!

  I finally managed to get the reinstallation CD to load.  I also spoke with telephone tech support at Microsoft who helped me to descend KB977165 my system.  After that was removed the computer booted without error.  By MS tech, I am also running the anti-virals and malicious programs to see if they detect all the other infections.

  Originally, the CD would load to the point of being able to choose between the options: continue to fix or exit.  At this point, the computer froze upwards and would not all repairs in order to remove KB977165.  Microsoft launches a call again tomorrow in order to install safety free bug so far.

  Thanks for your reply.

• 3 bugs in the shell cmd, the stability of windows, the slowdown and hibernation problems

  http://TechNet.Microsoft.com/en-us/library/cc723564.aspx

  http://social.technet.Microsoft.com/forums/en-us/w7itproui/thread/d6a26f20-DFB2-4AA9-b353-45efadb21a18

  http://answers.Microsoft.com/en-us/Windows/Forum/windows_xp-windows_programs/bug-in-cmd-shells-Rd-rmdir-Removes-even-when-you/4d3ee079-A364-47fc-Baa2-3a4e4aefc194

  I presented these 3 topics, which are bugs in the cmd shell. first they said I should introduce him to technet.  then they said I should present the msdn forums, although I don't see how it's appropriate, then told me I should post to Microsoft Answers, so I'm back to where I started.

  I suspect that these bugs may not affect only XP but the newer versions of windows as well.

  I have a XP Pro 32-bit and 3 GB of RAM, Pentium 4 HT 2.8GHz system (1 core, 2-wire).  It is a relatively new installation of windows, and I recently cleaned the CPU cooler.  I'm doing the repair of computers as my business and software development as a hobby.

  • do the hibernation twice in a row causes the need for a hard stop.  This is not good.  I should be able to do the overwintering without end.
  • Windows gets more unstable as time goes by, until I need a reboot after about a week or two of the race.  I wouldn't restart.  I don't want to restart. I need my development environment I need to put in place every time.
  • Windows gets slower and slower to react to the events of keyboard and mouse over time.  services.exe is apparently chewing 50% cpu for a few seconds so that this 'pause for the system' is happening.

  I agree with the response of Al Dunbar, posted to your thread in the TechNet forum.

  In any case, leave your comments here:

  Microsoft Connect
  https://connect.Microsoft.com/dashboard/Info/

  Windows 7 comments
  http://mymfe.Microsoft.com/Windows 7/Feedback.aspx? formID = 195

  PS Is not sure if Windows XP-related reactions are fun here.

• error 0x0000007B (0xf78a2524, 0xC0000034, 0x00000000, 0x00000000) after the installation of the new RAM

  I get the BSOD when booting with the STOP: 0x0000007B (0xf78a2524, 0xC0000034, 0x00000000, 0x00000000) message. The computer is a Dell Dimension 8400. I installed the new ram to find this message and we tried him swinging back the RAM on the former with the problem still persists.

  Hello

  Very good chance you loosened a cable or connection when you replaced the
  memory.

  Check with Dell Support, their drivers and documentation online and ask in the Dell
  forums for known issues.

  Dell support
  http://support.Dell.com/

  Dell support drivers - product manual & warranty Info (left side) - and much more
  http://support.Dell.com/support/index.aspx?c=us&l=en&s=DHS

  Dell forums
  http://en.community.Dell.com/forums/
  ================================================================

  Check the disk for malware:

  Create a Bootable CD with the Trinity Rescue Kit - free - which comes with 5 antivirus programs
  Integrable Hirem is another choice - more can be found using Google.

  Trinity Rescue Kit - download on top right of the page
  http://trinityhome.org/home/index.php?wpid=1&front_id=12

  CD of Hirem boot is another good choice
  http://www.hirensbootcd.NET/Download.html
  http://www.hirensbootcd.NET/CD-contents/138-HBCD-111.html

  ===================================================================

  You can also save the data and re-install Windows 7. The hard drive can be set
  another computer as a 2nd drive (the best) or in an external USB enclosure. Either would allow
  allows you to copy the data to removable media such as CD, DVD or other USB drives.

  Or you can use a boot Ubuntu CD to back up data.

  Use Ubuntu Live CD to backup files from your Windows computer dead
  http://www.howtogeek.com/HOWTO/Windows-Vista/use-Ubuntu-Live-CD-to-backup-files-from-your-dead-Windows-computer

  ===================================================================

  For slightly more:

  BCCode: 7B 0x0000007B<-- read="" this="">

  INACCESSIBLE_BOOT_DEVICE bug control has a value of 0x0000007B. This bug check indicates that the Microsoft Windows operating system has lost access to the system partition during startup.

  Important information if you have received a STOP Code

  If you have received a blue screen error, or stop code, the computer stopped abruptly to protect against data loss. A hardware device, its driver or software might have caused this error. If your copy of Windows is shipped with your computer, contact your computer manufacturer. If you purchased Windows separately from your computer, Microsoft provides support. To find contact information for Microsoft or the manufacturer of your computer connect with Support.

  If you have experience with computers and try to recover from this error, follow the steps in the Microsoft article solution STOP (blue screen) errors in Windows.

  The following actions could prevent a mistake like this does not happen:

  1. Download and install updates for your computer from Windows Update device drivers.
  2. Scan your computer for computer viruses.
  3. Check your hard drive for errors.

  Cause

  Bug INACCESSIBLE_BOOT_DEVICE control often occurs due to a failure of the boot device. During the initialization of the I/O system, the boot device driver could have no initialize the boot device (usually a hard drive). Initialization of file system may have failed because it does not recognize the data on the boot device. In addition, repartition the system partition or installing a new SCSI adapter or disk controller could encourage this error.

  This error can also occur because of incompatible disc material. If the error occurred in the initial configuration of the system, the system have maybe installed on an unsupported drive or a SCSI controller. Some controllers are supported only by the drivers that are in the library of drivers Windows (WDL). (These drivers require the user to perform a custom installation.)

  
  Resolution

  This error always occurs during the startup of the system. This error often occurs before the debugger connection, kind of debugging can be difficult, if not impossible.

  Fix a defective boot device: If a boot device is at fault, you must change the boot options. For more information changing these options, see Software Configuration on the target computer.

  Solve a problem of incompatible hard disk: If the installation program automatically detects the controller, you may have to skip the detection and the disc of the specific manufacturer allows to load the driver. Also, check the availability of updates for the firmware of the system BIOS and SCSI controller. Updates of this kind are usually available on the website or BBS of the hardware manufacturer.

  Delete all material recently added, especially of hard disks or controllers, to see if the error is resolved. If the problematic material is a hard drive, the firmware version of the drive may be incompatible with your version of the Windows operating system. Contact the manufacturer for updates. If you have removed another material element and the error is resolved, conflicts of port IRQ or i/o likely exist. Reconfigure the new device according to the manufacturer's instructions.

  Confirm that the hard disk drivers, hard disk controllers and SCSI adapters are listed in the list of the products tested Microsoft Windows market.

  If you have recently added a driver, restart your computer, and then press F8 to character-based menu that displays the choice of operating system. In the menu of Advanced Options , select the last known good Configuration option. This option is most effective when you add a single driver or service at a time.

  In addition, check your computer for viruses using any update, commercial software that examines the Master Boot Record of the disk hard antivirus. All systems of Windows files can be infected by viruses.

  This error can also occur due to corruption of the hard drive. Run Chkdsk /f /r on the system partition. You must restart the computer before the start of the analysis of disk. If you cannot start the computer due to the error, use the Recovery Console and run Chkdsk/r.

  If you cannot start the system in the last known good configuration, you should try to boot from the Windows CD. Then, you can run Chkdsk from the Repair Console.

  Warning   If your system partition is formatted with the FAT file system the long file names that use the Windows operating system could be damaged if you use Scandisk or another MS-DOS-based disk tool to verify the integrity of your hard disk from MS-DOS. Always use the version of Chkdsk that matches your version of Windows.

  If your system has SCSI adapters, contact the card manufacturer for updated Windows drivers. Try to disable sync negotiation in the SCSI BIOS, check the wiring and the SCSI ID of each device and confirming the proper termination. For IDE devices, define the IDE port integrated as primary only. Also check each IDE device for setting good master/subordinate/stand alone . Try to remove all IDE devices except for the hard drives. Finally, check the system log in Event Viewer for additional error messages that might help identify the device or driver that generated the error.

  BCCode: 7B 0x0000007B<-- read="" this="">
  * 1138.html? order = votes http://www.faultwire.com/solutions-fatal_error/Check-for-viruses-on-your-Computer-0x0000007B-

  =================================================================

  If you do not have a Windows 7 disc, you can borrow a friends because they are not a copy
  protected. The manufacturer of your system will also sell the physical DVD cheap since you already
  Clean Windows. You can also do an ERD on another computer.

  Try the Startup Repair - (if at anytime, benefit you from some, but not full access coming to Windows
  return and then try to startup repair.)

  How to start on the System Recovery Options in Windows 7
  http://www.SevenForums.com/tutorials/668-system-recovery-options.html

  What are the system recovery options in Windows 7?
  http://Windows.Microsoft.com/en-us/Windows7/what-are-the-system-recovery-options-in-Windows-7

  Try the disk Options recovery or Windows 7 startup repair.

  How to run a startup repair in Windows 7
  http://www.SevenForums.com/tutorials/681-startup-repair.html

  Also from the command PROMPT on the Console (if possible) recovery or a Windows 7 disc

  Start - type in the search box - find command top - RIGHT CLICK – RUN AS ADMIN

  sfc/scannow

  How to fix the system files of Windows 7 with the System File Checker
  http://www.SevenForums.com/tutorials/1538-SFC-SCANNOW-Command-System-File-Checker.html

  Then run checkdisk (chkdsk).

  How to run check disk in Windows 7
  http://www.SevenForums.com/tutorials/433-disk-check.html

  Retry After Chkdsk startup repair.

  If after those you can try the system restore to fashion without failure or the valuation or Windows 7
  disc.

  How to do a system restore in Windows 7
  http://www.SevenForums.com/tutorials/700-system-restore.html

  --------------------------------------------------------------------

  If you need to repair disks - these help repair Windows not re-install.
  Often an ERD will help you when the recovery disk is not - use OPTION 2 to
  make the disc.
  
  How to create a Windows 7 system repair disc
  http://www.SevenForums.com/tutorials/2083-system-repair-disc-create.html

  ======================================

  If necessary:

  What to do if Windows does not start correctly
  http://Windows.Microsoft.com/en-us/Windows-Vista/what-to-do-if-Windows-wont-start-correctly

  How to start on the System Recovery Options in Windows 7
  http://www.SevenForums.com/tutorials/668-system-recovery-options.html

  What are the system recovery options in Windows 7?
  http://Windows.Microsoft.com/en-us/Windows7/what-are-the-system-recovery-options-in-Windows-7

  How to do a repair installation to repair Windows 7
  http://www.SevenForums.com/tutorials

  I hope this helps.

• Remove the installation and re-install.

  I, like many others have got a bug in the system (it turned off AVG free edition). I was told by a friend of re - install Windows Vista, however, in doing so, a partition was created and then installed Vista again. I didn't have a partition, however, he blocked the bug. I want to know how to erase the installation and the partition and just 1 installation of Vista. How can I do (I'm not very computer. If anyone can give me a guide, it would be appreciated.

  Install an own custom, by removing the existing Partiton/s during the process:

  If install a cleaning is required with a good DVD of Vista (not HP, Dell recovery disks):

  At the startup/power on you should see at the bottom of the screen either F2 or DELETE, go to Setup/Bios or F12 for the Boot Menu

  Go to your Bios/Setup, or the Boot Menu at startup and change the Boot order to make the DVD/CD drive 1st in the boot order, then reboot with the disk in the drive.

  http://support.Microsoft.com/default.aspx/KB/918884

  MS advice on the conduct of clean install.

  http://www.theeldergeekvista.com/vista_clean_installation.htm

  A tutorial on the use of a clean install

  http://www.winsupersite.com/showcase/winvista_install_03.asp

  Super Guide Windows Vista Installation

  After installation > go to the website of the manufacturer of your computer/notebook > drivers and downloads Section > key in your model number > get latest Vista drivers for it > download/install them.

  Save all data, because it will be lost during a clean installation.

  See you soon.

  Mick Murphy - Microsoft partner

• Get the Installation failed (-10) for Wireless LAN Driver on Samsung laptop running Windows 7 computer

  I tried to install the update of the driver wireless LAN appears so in SW updates on my Samsung laptop model number NP305E5A that is running Windows 7 (64-bit); and I keep getting error message-10 Installation failure.  I called Samsung and they distance access my computer and tried to install it via the SW update, as well as through websites; and it's the same thing; and they said I need to contact Microsoft as there seems to be some sort of bug on the side of the things Microsoft... Or otherwise I have to do a factory reset my laptop (which I will lose everything I have on my computer - not my first choice of solving this problem)

  The biggest problem with this is that it has disabled the wireless all together, and EVERY time I turn on my computer I have to go into my settings and activate my wireless, and no matter what I do the settings will not stay and I lose connectivity wireless at times.

  Please tell us what to do.

  Download the driver manually for the wireless adapter. (see instructions below)

  Restart in Mode safe mode and uninstall the driver via Device Manager.

  http://Windows.Microsoft.com/en-us/Windows7/start-your-computer-in-safe-mode

  Click Start, type: Device Manager

  Press enter on your keyboard

  Expand the network adapters

  Right-click in the map listed wireless, this must be a wireless network Broadcom based card

  Click on uninstall.

  Restart your computer in normal mode.

  Download driver driver for Wireless adapt.

  Go to http://www.samsung.com/us/support/owners/product/NP305E5A-A01US

  Scroll down to the driver tab, and then select your operating system and architecture:

  http://Windows.Microsoft.com/en-us/Windows7/find-out-32-or-64-bit

  

  After you have selected your architecture, scroll to the bottom of the page and you will see your driver listed:

  

  Scroll to the right click on the button to download the Zip

  

  Once downloaded, extract the zip file and then double-click the installer to begin the installation.

  Compress and decompress files ( filezip ) - Windows help

  Tips for fixing common driver problems - Windows help

  http://Windows.Microsoft.com/en-us/Windows7/tips-for-fixing-common-driver-problems

  http://Windows.Microsoft.com/en-us/Windows7/update-a-driver-for-hardware-that-isn ' t-work correctly

• How to upgrade the Client installation from the Admin 12.1.0.2 to the most recent Group of patches available for the installation of the database.

  Hello

  We have sql client version 12.1.0.2 which has some issues in terms of sqlloader does not. This has been fixed by the patches oracle 20315685 group. Can someone help us understand how to install this group of patches on the installation of the Client. How to get on the client only the upgrade from group fixes provided by oracle.20315685 in this case.

  Concerning

  Patch 20315685 is WINDOWS BUNDLE PATCH 12.1DB. 0.2.2

  It is a bundle patch is developed to fix bugs related to 12.1.0.2.0 version on windows platform.

  This patch is common for the database server and Client.

  To apply the patch

  (1) services the customer stop like sqlplus, sqlloader

  (2) unzip the downloaded patch

  (3) cd

  (4) set as % ORACLE_HOME %path% environment variable

  (5) %ORACLE_HOME%/OPatch/opatch apply

  It will apply the necessary corrections.

• I just downloaded Adobe Flash Player, but the installer will not be displayed

  Shockwave Flash integrated into my Google Chrome browser kept crashing, so I decided to download a Flash Player outside of Google Chrome. I downloaded and it came to the screen that says I had to activate Flash Player by double-clicking on a file called "Adobe Flash Player installer. I used the classic interface of function (I hate windows 8.1), and nothing came. I spent an hour looking for my computer. Nothing. I have re downloaded Adobe Flash Player, and this time the installer came. I thougth it's finally over! When I tried to watch a video on Crunchyroll, my good friend Shockwave Flash has crashed again. I remembered that I had to close Chrome so that Flash start running. On Chrome closing and re-openeing an another Adobe Flash Player Installer popped up and brought me to this link, once again.

  
  

  Adobe - download Adobe Flash Player

  
  

  I don't understand what the issue is here. After my installation attempts, nothing has changed, and the shock wave continues to crash. Does anyone know if I did something wrong, need to change a setting somewhere, or any other reason/solution for this problem. Help, please!

  Hi tomc54715868,

  Flash player is bundled with google chrome and you cannot update or reinstall again outside of google chrome. To get the latest version of Flash player for chrome, you must update your google chrome. The current version is 17.0.0.169 and you can check your existing version by visiting the Flash Player Help link and click check now. And if your flash is still stuck on the last version of 17.0.0.169 in Chrome, well want to file a bug in https://bugbase.adobe.com/ with all possible details.

  The Setup file you use must be the installation of a flash drive for any other browser, but not for google chrome.

  Varun-

• Since the installation of creative cloud, I noticed a lack of disk space, recently I found CC had been storing GB of log files, how can I stop this nonsense?

  Since the installation of creative cloud, I noticed a lack of disk space, recently I found CC had been storing GB of log files, how can I stop this nonsense? 40 GB of space on my SSD HARD drive was recovered today by disabling the 8.1 windows temp folder. I was wondering what "ACC 22/04/2015-10-09 - 26.log" etc, and when I opened the I was shocked to discover Adobe CC was bringing together these huge logs on my computer since I bought and installed last month. WTF Adobe, how can I turn off or limit, as writes to the SSD of constantly to kill them and I do not consider your logs to be important use of space.

  Hi Lewis,

  Apologies for the inconvenience.

  Yes, there is a known and identified as a bug problem.

  Engineering product is right now working on that and I hope that the fixed very soon.

  Kind regards

  Sumit Singh