Build number

Similar Questions

• Acer A500 Tablet Android version 3.2.1 build number Lightspeed_1.0.9 (7.014.15_COM_GEN1)

  Hi Acer community,

  I have a Tablet acer A500, build number Android version 3.2.1 Lightspeed_1.0.9 (7.014.15_COM_GEN1).  When I try to update the system update OS tablet, there is a message saying ' download Fota, build number error! Lightspeed_1.0.9 (7.014.15_COM_GEN1).

  Could you please help me update my tablet OS?  What operating system would be the last one that needs the Tablet?

  Thank you very much

  Peditran

  lighspeed is a modified ROM, you can not use the Acer official updates.

  You must apply Community Board where this kind of feedingstuffs are discussed.

• vCenter 5.1 U1 strange build number - 1364037

  I've just updated by vCenter 5.1 5.1 Update 1, following the recommended procedures.

  The strange thing is that the build number is now watch, it is not what is expected and also does not appear on the list of the numbers of official version here VMware KB: correlation vCenter Server and ESX ESXi host build numbers to update level

  My build vCenter number indicates the version 5.1.0 build 1364037

  Any ideas?

  It is the build number for the latest version of patch for 5.1U1... It is therefore correct. Maybe the KB should be updated.

  Concerning

  Girish

• What is the build number of esx3.5 U5a

  Dear team,

  What is the build number of esx3.5 U5a?

  is that u5a 3.5 is the same as 3.5 U5?

  Please help me both r same or two different update.

  concerning

  Mr. VMware

  Hi MrVmware9423,

  VMware ESX Server 3.5 Update 5 Release Notes

  Note: As part of the end of the availability of a product free VMware Virtual Infrastructure, ESX 3.5 Update 5 upgrade package ESX350 - Update05.zip has been replaced by ESX350 - Update05a.zip to remove dependencies on the patches that are no longer available for download. Put guests at level using ESX350 - Update05a.zip are equivalent to those updated using the older package, but beams patch released before ESX 3.5 Update 5 is not required during the upgrade process.

  Let me know if that answers your question

  Concerning

  one

• Build number does not refresh

  Hello

  I have a little problem with the updates running on a couple of ESXi 4.1 hosts.

  
  We have 4 ESXi 4.1 Hosts, build some 348481, everything works as stand-alone servers, so not available vCenter or UpdateManager.

  Because they all start from USB Sticks installed on the server, it appeared that they have enough space on the poles to perform updates.

  However, after you set manually a volume zero (http://kb.vmware.com/kb/1033696) updates can be installed via vSphere CLI.

  So, I downloaded the latest patches of them installed via viohostupdate.pl b-i < file from update - > host server and VMWare.

  Moments later, he said that the update has been successfully installed and the server must be rebootet for the updates to take effect.

  After a reboot, it always show to the top of the old build number (348481), even if it be 582267 after the update.

  If I try to rerun the update, it says that all updates are already installed, so obviously that it install the updates.

  The problem is the same for all four ESXi hosts.

  Any thoughts on why it still shows the old build number?

  Best regards

  Please post the results of the query here, you probably installed the patches that are not applicable to the esxi4.1

• Update - old Build number of the host

  Hello

  I tried to update two new hosts esxi (embedded) to the required version (381591), they are currently on version 348481. I used vSphere vcli on one and upgraded using vihostupdate.pl and on the other hand I tried to move the patch to a local depot and using esxupdate. The two seem to install properly and reported that the installation was a success and to restart, however, after rebooting the hosts, they have the old 348481 build number.

  I tried to reinstall, but told me that the patch is already installed. Any ideas?

  Thank you!

  Ciaran

  Why do you have patches of ESX applied if you use ESX (i)?

  Try to remove:

  UG-201101223- ESX410- 2011 - 08 - 05 T 12: 23:22 3w-9xxx: driver scsi for VMware ESX
  UG-201101224- ESX410- 2011 - 08 - 05 T 12: 23:22 vxge: driver for VMware ESX

  reboot a server and check the construction.

• VMWare ESX 3.5 - Build number

  Hello

  As I discovered, the build number for ESX 3.5 Update 5 is "207095".

  Currently, the "213532" version, but I've never installed update 5. Update 4 was installed and would invest it has been updated with Update Manager. So my question is...

  VMWare View 4.0 should VMWare ESX 3.5 Update 3 or 4, so in principle, we have 'only' 4 update is installed, but the version number is higher and is in line with the update 5 or greater. So, what's my real condition now? Thanks for help.

  Attached document will help you to upgrade the server ESX 3.5 U4 to 3.5 U 5

• Build number esx wrong after upgrading to esx 2.5 update 4

  I have 2 area of ESX host in update 2 (#110268 build number). I upgraded one of my box with the Update Manager by creating a basaline which included upgrading esx 4 only.

  After that I took out of the modality of mintenance of the host ESx updeated I have always the same number as before construction. I tried to restart the server services VC but who has not updated the build number.

  So I login in the form of the console and the command of v - vmware has given me the right version number (153875).

  so, what gives? Anyone know why there is an inconsistency in the VIC and the console? What I have to restart my ESX host in the order the update version number indicated by VIC?

  Thnks

  go to the service console and type:

  service mgmt-vmware restart

• What is the VMware Tools version / build number in ESXi 4.1U2?

  Hello world

  As far as I know, the version/version number of "VMware Tools" in ESXi 4.1U1 ("4.1 Update 1") is "Version 8.3.7, build-341836" (at least for Windows virtual machines). "

  Can someone tell me if the version/version number of "VMware Tools" in 4.1U2 ("4.1 Update 2") ESXi is different? I read the "Release Notes" for vCenter Server 4.1 update ESXi 4.1 Update 2 - http://www.vmware.com/support/vsphere4/doc/vsp_esxi41_u2_rel_notes.html - and 2 - http://www.vmware.com/support/vsphere4/doc/vsp_vc41_u2_rel_notes.html - but I did find the information on this subject.

  Thanks in advance!

  See you soon,.

  Ricardo

  Hello

  Based on my VMware 4.1 hosts update 2, I ve vmware tools 8.3.12.8191

  So I found following KB that can be useful for you - http://kb.vmware.com/selfservice/microsites/search.do?language=en_US&cmd=displayKC&externalId=1003947

  Post edited by: MauroBonder

• Build number of GEN

  To build GEN
  
  the first field
  
  I have set up as Gen 1
  
  but I got this error
  
  The GEN number for this field is illegal.
  
  What does that mean
  
  Published by: level next January 13, 2012 05:13

  Number of incorrect generation in the field definition, for example

  GEN1, PRODUCT

  He would need start from

  GEN2, PRODUCT

  Take a look-http://docs.oracle.com/cd/E17236_01/epm.1112/esb_dbag/images/graphics/aslvlout.jpg
  Generation 1 is the dimension.

  If you want something like - http://docs.oracle.com/cd/E17236_01/epm.1112/esb_dbag/images/graphics/adgenbld.gif

  See you soon

  John
  http://John-Goodwin.blogspot.com/

• Last Build number for Z3

  My version number is 23.0.A.2.105. The Sony site shows the latest available software are 23.0.A.2.93.
  I guess that Sony has not updated its own information and that I have the latest update.

  Thanks for the explanation - it confirms what indicates the center of update on my phone.

• Build number of trunk (the db - not found upgrade.xml:28 schema version)

  Hello
  
  I would like to start exploring the code in the trunk, especially because I would try a few ideas (for example: automatic groups based on special criteria & resource type in the resource name) who could relate to the database. Since 3.0 changes the db access to Hibernate, I want to my attempts at base on the trunk.
  
  When I do an Ant dbsetup, I get the following error:
  
  installer/Data/DB-Upgrade.xml:28: version of schema not found!
  
  I specified in my build.properties:
  HQ. Schema.Target.version = latest, but that made no difference. Can someone point me in the 'common sense '?
  
  Thanks in advance!

  Hi Vincent,.

  Update your tree, and then try again.   The build.properties file needed
  the JDBC version must be explicitly set to 2.

  -Jon

  On 19 October 2006, at 06:07, Vincent De Philippe wrote:

  > Hi
  >
  > I would like to start exploring the code in the trunk, especially
  > because I would try a few ideas (for example: automatic groups)
  (> based on special criteria & resource type in the resource name)
  > that could relate to the database. Since 3.0 changes the access to
  > the db to Hibernate, I want to my attempts at base on the trunk.
  >
  > when I do an Ant dbsetup, I get the following error:
  >
  > installer/data/db-upgrade.xml:28: version of schema not found!
  >
  > I specified in my build.properties:
  > hq.schema.target.version = LATEST, but who did not do any
  > difference. Can someone point me in the 'common sense '?
  >
  > Thanks in advance!

• The last build number for ESX3.5 207095 indicates the safer version for ESX3.5?

  Out of all the builds for ESX3.5... ie.,.

  • VMware ESX Server 3.5 (December 10, 2007)
  • VMware ESX Server 3.5 Build 64607 (20 February 2008)
  • VMware ESX Server 3.5 Update 1 build 82663 (10 April 2008)
  • VMware ESX Server 3.5 Update 2 build 110268 (13 August 2008)
  • VMware ESX Server 3.5 Update 3 build 123630 (6 November 2008)
  • VMware ESX Server 3.5 update 4 build 153875 (30 March 2009)
  • VMware ESX Server 3.5 update 5 build 207095 (3 December 2009)

  207095 build represent the safer and upto date version of ESX3.5?

  Yes, it's because of the assumption.

  See http://www.vmware.com/support/policies/lifecycle/vi/faq.html

  André

• Identify the version of the build number update

  Hello

  I have an esxi 4.0.0 host but I am not sure on which version of the update I am running.

  In the vSphere client when I select the host ESXi he says ESXi 4.0.0 360236. I am I can by running the update 1 or 2, or am I not running any update to update? Help, please

  /A

  To find which updated that you installed you can check the version number on the site to update to http://www.vmware.com/patch/download/

  I set up the ESXi 4.0 hotfixes and updates for better viewing.

  GA-Version: VMware-VMvisor-Installer - 4.0.0 - 164009.x86_64.iso

  ESXi-4.0.0-patch01-vmware-esx-firmware-4.0.0-0.5.175625.i386.vib
  ESXi - 4.0.0 - patch01 - vmware-esx-tools-light-4.0.0-0.5.175625.i386.vib

  ESXi-4.0.0-EP1-vmware-esx-firmware-4.0.0-0.6.181792.i386.vib

  ESXi-4.0.0-patch02-vmware-esx-firmware-4.0.0-0.7.193498.i386.vib
  ESXi - 4.0.0 - patch02 - vmware-esx-tools-light-4.0.0-0.7.193498.i386.vib

  * ESXi - 4.0.0 - update01 *-vmware-esx-firmware - 4.0.0 - 1.9.208167.i386.vib
  * ESXi - 4.0.0 - update01 *-vmware-esx-tools-light-4.0.0-1.9.208167.i386.vib
  * ESXi - 4.0.0 - update01 *-vmware-esx-viclient - 4.0.0 - 1.9.208167.i386.vib

  ESXi-4.0.0-patch03-vmware-esx-firmware-4.0.0-1.10.219382.i386.vib
  ESXi - 4.0.0 - patch03 - vmware-esx-tools-light-4.0.0-1.10.219382.i386.vib

  ESXi-4.0.0-patch04-vmware-esx-firmware-4.0.0-1.11.236512.i386.vib
  ESXi - 4.0.0 - patch04 - vmware-esx-tools-light-4.0.0-1.11.236512.i386.vib

  ESXi-4.0.0-patch05-vmware-esx-firmware-4.0.0-1.12.244038.i386.vib

  ESXi-4.0.0-P06-vmware-esx-firmware-4.0.0-1.13.256968.i386.vib
  ESXi - 4.0.0 - P06 - vmware-esx-tools-light-4.0.0-1.13.256968.i386.vib

  * ESXi - 4.0.0 - update02 *-vmware-esx-firmware - 4.0.0 - 2.17.261974.i386.vib
  * ESXi - 4.0.0 - update02 *-vmware-esx-tools-light-4.0.0-2.17.261974.i386.vib
  * ESXi - 4.0.0 - update02 *-vmware-esx-viclient - 4.0.0 - 2.17.261974.i386.vib

  ESXi-4.0.0-patch07-vmware-esx-firmware-4.0.0-2.18.294855.i386.vib
  ESXi - 4.0.0 - patch07 - vmware-esx-tools-light-4.0.0-2.18.294855.i386.vib

  ESXi-4.0.0-patch08-vmware-esx-firmware-4.0.0-2.19.332073.i386.vib
  ESXi - 4.0.0 - patch08 - vmware-esx-tools-light-4.0.0-2.19.332073.i386.vib

  ESXi-4.0.0-patch09-vmware-esx-firmware-4.0.0-2.20.360236.i386.vib
  ESXi-4.0.0-patch09-vmware-esx-viclient-4.0.0-2.20.360236.i386.vib

  André

• ESX 3.0.2 Build number even after the latest patches

  Hello

  as soon as I installed the latest patches for ESX 3.0.2 version number still shows 134609. Usually, it goes back once the patches have been applied.

  Any ideas?

  Raoulst

  Use vmware - v to check the version of latetst on your box

  Concerning

  Anil

  Save the planet, go for green

  If you have found my reply to be useful, feel free to mark it as useful or Correct.

• Flex mobile project - ant build number

  Hello

  I get an error when I compile my mobile project with the Ant build script. "Could not resolve < s:ViewNavigatorApplication > to a component implementation". But, I use the same build file to generate a project mobile simple helloworld that works very well.

  < mxmlc

  file = "${main_class}".

  output = "${output_loc}".

  local = "${LOCAL}.

  static-RSLS = "false".

  accessible = "false".

  ConfigName = "airmobile.

  Debug = "${debug_mode}.

  FailOnError = "true".

  fork = "true".

  MaxMemory = "512 m" >

  < path-element source-path = "${class_path}" / >

  < compile .library-path dir = "${FLEX_HOME} ' / managers ' append ="true">"

  < name = "libs / *" / >

  < / compile .library-path >

  < path to library dir = "${FLEX_HOME} / frameworks / local / ${LOCAL} ' append ="true"/ >"

  < library dir = path "${lib_path} ' includes ="*.swc"append ="true"/ >

  < file external-library-path = "${AIR_GLOBAL}" append = "true" / >

  < compile .library-path dir = ' D:/Program Files/Apache Software Foundation/Tomcat 7.0/webapps/MobilityServer/WEB-INF/flex/libs/air ' includes = "airfds.swc" append = "true" / > "

  < compile .library-path dir = ' D:/Program Files/Apache Software Foundation/Tomcat 7.0/webapps/MobilityServer/WEB-INF/flex/libs ' includes = "fds.swc" append = "true" / > "

  < compile .library-path dir = ' D:/Program Files/Apache Software Foundation/Tomcat 7.0/webapps/MobilityServer/WEB-INF/flex/libs ' includes = "fiber.swc" append = "true" / > "

  "< dir="C:/Perforce/mobility/main/NextGen/client/libraries/external/robotlegs/1.4.0/bin compile .library-path "includes =" robotlegs Framework - v1.4.0.swc "append ="true"/ >

  < compile .library-path dir = includes "C:/Perforce/mobility/main/NextGen/customer/libraries/CommonMobileLibrary/bin" = "CommonMobile.swc" append = "true" / > "

  < compile .library-path dir = includes "C:/Perforce/mobility/main/NextGen/customer/libraries/NativeMobileLibrary/bin" = "ASNativeLibrary.swc" append = "true" / > < / mxmlc > "

  Post edited by: betheflexcoder

  Looks like you are missing mobilecomponents.swc