Build the executable with WSN

Salvation OR engineers,

How can I deploy the WSN library in an executable file?

Thanks in advance,

Luiz

OLA SR. Luiz.

Neste caso, Bivvy instalar o also pilot NI WSN no wave maintains .exe will be used e o computador não fazer o Chipre will deploy das variaveis, POIS elas sao published pelo Gateway automatically.

Caso o senhor não possua o instalador do pilot, por favor, acesse o link abaixo e faca o download do mesmo.

http://Joule.NI.com/nidu/CDs/view/p/ID/2158/lang/en

Single also o modulo NI WSN pioneer não precisa ser taboo para this type of application.

Beneficial has will para contactar em caso amendments of other questions.

Atenciosamente.

Hello, Mr. Luiz.

In this case, try to install the driver of WSN in the PC that will serve as the .exe file. If you do not have the driver installation program and won't be not necessary do the deployment because the variables are automatically published by the gateway.

Please, use the link below to download the driver.

http://Joule.NI.com/nidu/CDs/view/p/ID/2158/lang/en

Feel free to contact us for any question you may have.

Sincerely.

Tags: NI Products

Similar Questions

How to build the project with library error in adf adf

Hello
IM using jdev 11.1.2.3
in my project I module 2 so we need to build the project with adf dependency libraries...

Two copies of the way to build the project with trial and error in adf adf

Timo

build the executable; delete tree.vi VI?

I got a new job contract.

The old person of LabVIEW has left the company and is not available.

In the Word file, he leaves behind him, he writes

To generate an executable or Setup during the system test, you must remove 1 file of the project. The file is called tree.vi VI, it draws in the Agilent MXA series. Remove the vi and build. When you save the project, it will complain. Reject errors, and it will allow you to move forward.

The Agilent MXA screws are in a lvlib

Is there an easier way to do it?

The only reason why I could see wanting to remove the VI tree is because VI is broken and does not work. Usually, it is because it has entries with requried subVIs and the VI of the tree is really just to show you the functions, sometimes in the same provision as a view of the palette.

Now have a broken VI usually is a problem because it cannot work, but in modern versions of the manufacturer under the heading Exlclusions extra, you can have things like 'Remove unused libraries of the project members' this will remove the screws that are not acually used from the build process. If this is not verified your broken VI will be added, and then the build fails because a VI is broken. Is - what the problem was the original developer?

Build the executable and Installer programmatically

Hello

I have a project in BT 8.5.1 with several objectives of the RT, and each of them has its executable corresponding specifications of construction (within the same project).

Whenever I want to compile a new version of my software, I have to compile one by one, changing properties each time (because I hace several machines and railways of destination can be completely different, or even the icon may change).

I found the way to automate this process of compilation through BuildTargetBuildSpecifications.vi (in Program Files \National Instruments\LabVIEW 8.5\vi.lib\AppBuilder\), but it is very basic, because it only allows to select the project and the name of each application.

I need a way to access the properties of each specification to Build programmatically (the Destination path and the path of the icon at least) and build all sequencially.

In the same folder that the BuildTargetBuildSpecifications.vi mentioned there are many functions that seem to access to all of these properties, but I have no idea how to use (most of them use"objects"as input parameter).

Could someone help me with this?

Thank you very much!

Hi Fruss,

additional to the information here, I'll send you a project including a VI that allows to change icons programmatically. Simply choose your project path and where your icons. I hope this information helps you! If you have any questions you can contact me again.

Best regards

SUSE

How to build the table with all the combinations of a source table?

Hello

I have a 2D array that contains the list of the power user-defined settings. The number of PSs (table rows) is not fixed. For example - 3 PSs:

Stage of Min Max name

PS1 3.0 3.6 0.3

PS2 0.9 1.2 0.1

PS3 1.7 1.9 0.1

I need to build, from this list, a table of all the combinations as below:

PS1 PS2 PS3

3.0 0.9 1.7

3.0 0.9 1.8

3.0 0.9 1.9

3.0 1.0 1.7

3.0 1.0 1.8

3.0 1.0 1.9

3.0 1.1 1.7

3.0 1.1 1.8

3.0 1.1 1.9

3.0 1.2-1.7

3.0 1.2-1.8

3.0 1.2-1.9

3.3 0.9 1.7

3.3 0.9 1.8

3.3 0.9 1.9

3.3 1.0 1.7

3.3 1.0 1.8

3.3 1.0 1.9

3.3 1.1 1.7

3.3 1.1 1.8

3.3 1.1 1.9

3.3 1.2 1.7

3.3 1.2 1.8

3.3 1.2 1.9

3.6 0.9 1.7

3.6 0.9 1.8

3.6 0.9 1.9

3.6 1.0 1.7

3.6 1.0 1.8

3.6 1.0 1.9

3.6 1.1 1.7

3.6 1.8 1.1

3.6 1.1 1.9

3.6 1.2 1.7

3.6 1.2 1.8

3.6 1.2 1.9

How to build this table programmatically?

(Note also that the number of rows in the source table is not fixed).

Thanks in advance!

Hi Berezka,

using a magic of automatic indexing:

How to build the javafx with maven project
Hi I have a simple example where I want to get a screen of javafx. I want to build using maven... I have the following code, does anyone have any ideas how to get this configured?

App.Java - contains my main class and run the javafx code

Import javafx.application.Application;
Import javafx.scene.Scene;
Import javafx.stage.Stage;

/**
* Hello World!
*
*/
public class App
{
Public Shared Sub main (String [] args)
{
System.out.println ("Hello World!");
Application.Launch (ApplicationToLaunchJavaFX.class, null);
}
}

ApplicationToLaunchJavaFX - the stage to display (javafx code)

SerializableAttribute public class ApplicationToLaunchJavaFX extends Application
{

@Override
public void start (steps) riser Exception {}
stage.setTitle ("Helllllllooooo");
internship. Show();
}

}

POM. XML

< project xmlns = "http://maven.apache.org/POM/4.0.0" xmlns: xsi = "http://www.w3.org/2001/XMLSchema-instance".
xsi: schemaLocation = "http://maven.apache.org/POM/4.0.0 http://maven.apache.org/xsd/maven-4.0.0.xsd" >
< > 4.0.0 modelVersion < / modelVersion >

< groupId > com A < / groupId >
mavenproject1hellowworld < artifactId > < / artifactId >
< version > 1.0 - SNAPSHOT < / version >
jar of < package > < / packaging >

< name > mavenproject1hellowworld < / name >
< url > http://maven.apache.org < URL >

Properties of <>
< project.build.sourceEncoding > < /project.build.sourceEncoding > UTF-8
< / properties >

< dependency >
< dependency >
JUnit < groupId > < / groupId >
JUnit < artifactId > < / artifactId >
< version > 3.8.1 < / version >
< range > test < / scope >
< / dependence >

< dependency >
com.Oracle < groupId > < / groupId >
JavaFX < artifactId > < / artifactId >
< version > 2.0 < / version >
< scope > system < / scope >
< systemPath > C:\Program Files\Oracle\JavaFX 2.0 SDK/rt/lib/jfxrt.jar < / systemPath >
< / dependence >

< / dependencies >
< / project >
This pom has managed to create a click to run jar for me.
http://code.Google.com/p/Willow-browser/source/browse/Pom.XML

Can I build the CC with the components web, polymer and angularjs Extensions?

Are Extensions CC fully standards compliant so that I can use W3C web components, polymer and angularjs to achieve CC Extensions?

I use AngularJS and had no problems. It works like a charm.

Thomas

building XPath with the XML with the Namespace using PL SQL

All trying to build the path to each node, when the XML code with no namespace, the following code works very well provide the result
1 ~/
2 ~ /Person/
3 ~ /Person/ âge /
4 ~ /Person/ homecity /
5 ~ /Person/ nom /
6 ~ /Person/ AccueilGuides/lat /
7 ~ /Person/ AccueilGuides/name /
8 ~ /Person/ homecity / long /
But when the XML is changed to
```
<person xmlns="urn:person" xmlns:lat="urn:lat">
```
```
<name>Rob</name>
```
```
<age>37</age>
```
```
<homecity>
```
```
    <name>London</name>
```
```
    <lat>123.000</lat>
```
```
    <long>0.00</long>
```
```
</homecity>
```
```
</person>"
```
The result of the code below the performance translates into just below result
```
1~/
```
```
 2~/person/
```
In the XML file above, XML namespace is not constant and varies for each XML. My requirement is to analyze the complete XML code, where I can read the XML with namespace and get the result that is mentioned below
```
1~/
```
```
2~/person/
```
```
3~/person/age/
```
```
4~/person/homecity/
```
```
5~/person/name/
```
```
6~/person/homecity/lat:lat/
```
```
7~/person/homecity/name/
```
```
8~/person/homecity/long/
```
Can you please help me solve the issue mentioned. Thanks in advance. -Code snippet below:
```
DECLARE
```
```
  l_File VARCHAR2(32000) := '<person>
```
```
<name>Rob</name>
```
```
<age>37</age>
```
```
<homecity>
```
```
    <name>London</name>
```
```
    <lat>123.000</lat>
```
```
    <long>0.00</long>
```
```
</homecity>
```
```
</person>';
```
```
 
```
```
 l_Where_Clause VARCHAR2(100) := '/*';
```
```
 l_Append_Var   VARCHAR2(100) := '/';
```
```
 
```
```
 TYPE Ty_Paths IS TABLE OF VARCHAR2(1000) INDEX BY PLS_INTEGER;
```
```
 l_Ty_Paths      Ty_Paths;
```
```
 l_Ty_Paths_Temp Ty_Paths;
```
```
 
```
```
 TYPE Ty_Verifier IS TABLE OF VARCHAR2(1000) INDEX BY VARCHAR2(1000);
```
```
 l_Ty_Varifier Ty_Verifier;
```
```
 
```
```
l_Prev_Query_Rec VARCHAR2(100);
```
```
l_Index_Num      NUMBER := 0;
```
```
l_Cur_Exec_Row   NUMBER := 0;
```
```
BEGIN
```
```
 l_Ty_Paths(Nvl(l_Ty_Paths.COUNT, 0) + 1) := l_Append_Var;
```
```
 l_Cur_Exec_Row := 1;
```
```
 
```
```
 --Dbms_Output.put_line('Before entering the loop');
```
```
 
```
```
 LOOP
```
```
   l_Ty_Paths_Temp.DELETE;
```
```
  SELECT DISTINCT REPLACE(l_Append_Var || '/' || t.Xml || '/', '//', '/') BULK COLLECT
```
```
   INTO   l_Ty_Paths_Temp
```
```
  FROM   (SELECT Xmltype(Extract(VALUE(e), '/').Getstringval()) .Getrootelement() AS Xml
```
```
           FROM   TABLE(Xmlsequence(Extract(Xmltype(l_File), l_Where_Clause))) e) t;
```
```
 
```
```
  l_Ty_Varifier(Nvl(l_Ty_Varifier.COUNT, 0) + 1) := l_Append_Var;
```
```
  --Dbms_Output.put_line('L_TY_PATHS_TEMP.Count::'||L_TY_PATHS_TEMP.Count);
```
```
  IF l_Ty_Paths_Temp.COUNT > 0 THEN
```
```
     l_Index_Num := Nvl(l_Ty_Paths.COUNT, 0) + 1;
```
```
     FOR i IN l_Ty_Paths_Temp.FIRST .. l_Ty_Paths_Temp.LAST LOOP
```
```
        l_Ty_Paths(l_Index_Num) := l_Ty_Paths_Temp(i);
```
```
        --Dbms_Output.put_line('L_INDEX_NUM::'||L_INDEX_NUM);
```
```
        --Dbms_Output.put_line('L_TY_PATHS(L_INDEX_NUM)::'||L_TY_PATHS(L_INDEX_NUM));
```
```
        l_Index_Num := l_Index_Num + 1;
```
```
     END LOOP;
```
```
  END IF;
```
```
  --Dbms_Output.put_line('L_TY_PATHS.Count::'||L_TY_PATHS.Count);
```
```
  --Dbms_Output.put_line('L_TY_PATHS.Count::'||L_CUR_EXEC_ROW);
```
```
 
```
```
  IF (NOT l_Ty_Paths.EXISTS(l_Cur_Exec_Row + 1)) OR (l_Cur_Exec_Row = l_Ty_Paths.COUNT) THEN
```
```
     --Dbms_Output.put_line('Exiting');
```
```
     EXIT;
```
```
  ELSE
```
```
     --Dbms_Output.put_line('Inside the Else part');
```
```
 
```
```
     l_Cur_Exec_Row := l_Cur_Exec_Row + 1;
```
```
     l_Append_Var   := l_Ty_Paths(l_Cur_Exec_Row);
```
```
     l_Where_Clause := l_Ty_Paths(l_Cur_Exec_Row) || '*';
```
```
  END IF;
```
```
 
```
```
  --To Display the record:
```
```
     --Dbms_Output.put_line(L_TY_PATHS.Count);
```
```
  END LOOP;
```
```
  IF l_Ty_Paths.COUNT > 0 THEN
```
```
    FOR i IN l_Ty_Paths.FIRST .. l_Ty_Paths.LAST LOOP
```
```
      Dbms_Output.Put_Line(i || ' record is ' || l_Ty_Paths(i));
```
```
   END LOOP;
```
```
 END IF;
```
```
 
```
```
END;
```
Thank you.

If you have patterns, it may be easier to work directly on them.

Here's the idea:

(1) install "Oracle XML DB manageability Packages", available on the code page for the XML DB sample: http://download.oracle.com/otn/samplecode/xdb_util.zip

This is a set of utilities which allows us to annotate the XML schemas, to deal with the underlying or storage structure, and (this is the interesting part here) a few views of dictionary to describe the relational XSD structure.

(it is now an integrated 12 c btw)

(2) enter these two schemas:

Start

() dbms_xmlschema.registerSchema

schemaURL-online "pacs.002.001.03S2.xsd."

schemaDoc-online xmltype (bfilename('TEST_DIR','pacs.002.001.03S2.xsd'), nls_charset_id ('AL32UTF8'))

local-online true

genTypes-online fake

genTables-online fake

enableHierarchy-online dbms_xmlschema. ENABLE_HIERARCHY_NONE

options-online dbms_xmlschema. REGISTER_BINARYXML

);

end;

/

Start

() dbms_xmlschema.registerSchema

schemaURL-online "SCTCvfBlkCredTrf.xsd."

schemaDoc-online xmltype (bfilename('TEST_DIR','SCTCvfBlkCredTrf.xsd'), nls_charset_id ('AL32UTF8'))

local-online true

genTypes-online fake

genTables-online fake

enableHierarchy-online dbms_xmlschema. ENABLE_HIERARCHY_NONE

options-online dbms_xmlschema. REGISTER_BINARYXML

);

end;

/

(3) the following query built all the paths of node defined by the main schema (SCTCvfBlkCredTrf.xsd), as well as the namespaces:

with schema_list (schema_url, schema_owner) as)

Select 'SCTCvfBlkCredTrf.xsd', 'OTN' from dual

Union of all the

Select sd.dep_schema_url, sd.dep_schema_owner

of schema_list sl

Join dba_xml_schema_dependency on sd.schema_url = sl.schema_url sd

and sd.schema_owner = sl.schema_owner

),

namespace_mapping (target_namespace, prefix) as long as)

Select target_namespace

, « ns » || ROW_NUMBER() (order target_namespace) as a prefix

of user_xml_schema_namespaces

where schema_url in (select schema_url from schema_list)

),

() schema_nodes

is_attr

node_name

max_occurs

element_id

parent_element_id

target_namespace

schema_url

) as)

Select 0

element_name as node_name

xmlcast)

XMLQUERY ('/ XS: ELEMENT / ' @maxOccurs passing returning content element)

as varchar2 (10)

)

element_id

parent_element_id

target_namespace

schema_url

of user_xml_schema_elements

where schema_url in (select schema_url from schema_list)

Union of all the

Select 1

attribute_name as node_name

null

null

element_id

target_namespace

schema_url

of user_xml_schema_attributes

where schema_url in (select schema_url from schema_list)

)

Select the level

sn.node_name

sn.max_occurs

connect_by_isleaf as is_leaf

sys_connect_by_path)

-case when ns.prefix is not null and is_attr = 0 then ns.prefix | ':' end |

-case when sn.is_attr = 1 then ' @' end |

SN. NODE_NAME

, '/'

) as xpath

-, target_namespace

of schema_nodes sn

outer join ns namespace_mapping let ns.target_namespace = sn.target_namespace

Connect prior sn.element_id = sn.parent_element_id

Start with sn.schema_url = "SCTCvfBlkCredTrf.xsd".

and sn.parent_element_id is null

;

LEVEL MAX_OCCURS IS_LEAF XPATH NODE_NAME
----- ------------------ ---------- ------- ----------------------------------------------------------------------------------------------------------
1 SCTCvfBlkCredTrf 0 /ns2:SCTCvfBlkCredTrf
2 1 SndgInst /ns2:SCTCvfBlkCredTrf / ns2:SndgInst
2 1 RcvgInst /ns2:SCTCvfBlkCredTrf / ns2:RcvgInst
2 1 SrvcId /ns2:SCTCvfBlkCredTrf / ns2:SrvcId
2 1 TstCode /ns2:SCTCvfBlkCredTrf / ns2:TstCode
2 FType 1 /ns2:SCTCvfBlkCredTrf / ns2:FType
2 FileRef 1 /ns2:SCTCvfBlkCredTrf / ns2:FileRef
2 1 FileDtTm /ns2:SCTCvfBlkCredTrf / ns2:FileDtTm
2 1 OrigFRef /ns2:SCTCvfBlkCredTrf / ns2:OrigFRef
2 1 OrigFName /ns2:SCTCvfBlkCredTrf / ns2:OrigFName
2 1 OrigDtTm /ns2:SCTCvfBlkCredTrf / ns2:OrigDtTm
2 1 FileRjctRsn /ns2:SCTCvfBlkCredTrf / ns2:FileRjctRsn
2 1 FileBusDt /ns2:SCTCvfBlkCredTrf / ns2:FileBusDt
2 1 FileCycleNo /ns2:SCTCvfBlkCredTrf / ns2:FileCycleNo
2 FIToFIPmtStsRptS2 1 /ns2:SCTCvfBlkCredTrf 0 / ns2:FIToFIPmtStsRptS2
3 GrpHdr 0 /ns2:SCTCvfBlkCredTrf / ns2:FIToFIPmtStsRptS2 / ns1:GrpHdr
4 MsgId 1 /ns2:SCTCvfBlkCredTrf / ns2:FIToFIPmtStsRptS2 / ns1:GrpHdr / ns1:MsgId
4 CreDtTm 1 /ns2:SCTCvfBlkCredTrf / ns2:FIToFIPmtStsRptS2 / ns1:GrpHdr / ns1:CreDtTm
4 InstgAgt 0 /ns2:SCTCvfBlkCredTrf / ns2:FIToFIPmtStsRptS2 / ns1:GrpHdr / ns1:InstgAgt
5 FinInstnId 0 /ns2:SCTCvfBlkCredTrf / ns2:FIToFIPmtStsRptS2 / ns1:GrpHdr / ns1:InstgAgt / ns1:FinInstnId
6 BIC 1 /ns2:SCTCvfBlkCredTrf / ns2:FIToFIPmtStsRptS2 / ns1:GrpHdr / ns1:InstgAgt / ns1:FinInstnId / ns1:BIC
3 OrgnlGrpInfAndSts 0 /ns2:SCTCvfBlkCredTrf / ns2:FIToFIPmtStsRptS2 / ns1:OrgnlGrpInfAndSts
4 OrgnlMsgId 1 /ns2:SCTCvfBlkCredTrf / ns2:FIToFIPmtStsRptS2 / ns1:OrgnlGrpInfAndSts / ns1:OrgnlMsgId
4 OrgnlMsgNmId 1 /ns2:SCTCvfBlkCredTrf / ns2:FIToFIPmtStsRptS2 / ns1:OrgnlGrpInfAndSts / ns1:OrgnlMsgNmId
4 OrgnlNbOfTxs 1 /ns2:SCTCvfBlkCredTrf / ns2:FIToFIPmtStsRptS2 / ns1:OrgnlGrpInfAndSts / ns1:OrgnlNbOfTxs
4 OrgnlCtrlSum 1 /ns2:SCTCvfBlkCredTrf / ns2:FIToFIPmtStsRptS2 / ns1:OrgnlGrpInfAndSts / ns1:OrgnlCtrlSum
4 GrpSts 1 /ns2:SCTCvfBlkCredTrf / ns2:FIToFIPmtStsRptS2 / ns1:OrgnlGrpInfAndSts / ns1:GrpSts
4 StsRsnInf 0 /ns2:SCTCvfBlkCredTrf / ns2:FIToFIPmtStsRptS2 / ns1:OrgnlGrpInfAndSts / ns1:StsRsnInf
5 Orgtr 0 /ns2:SCTCvfBlkCredTrf / ns2:FIToFIPmtStsRptS2 / ns1:OrgnlGrpInfAndSts / ns1:StsRsnInf / ns1:Orgtr
6 id 0 /ns2:SCTCvfBlkCredTrf / ns2:FIToFIPmtStsRptS2 / ns1:OrgnlGrpInfAndSts / ns1:StsRsnInf / ns1:Orgtr / ns1:Id
7 OrgId 0 /ns2:SCTCvfBlkCredTrf / ns2:FIToFIPmtStsRptS2 / ns1:OrgnlGrpInfAndSts / ns1:StsRsnInf / ns1:Orgtr / ns1:Id / ns1:OrgId
8 1 BICOrBEI /ns2:SCTCvfBlkCredTrf / ns2:FIToFIPmtStsRptS2 / ns1:OrgnlGrpInfAndSts / ns1:StsRsnInf / ns1:Orgtr / ns1:Id / ns1:OrgId / ns1:BICOrBEI
5 ARS 0 /ns2:SCTCvfBlkCredTrf / ns2:FIToFIPmtStsRptS2 / ns1:OrgnlGrpInfAndSts / ns1:StsRsnInf / ns1:Rsn
6 Cd 1 /ns2:SCTCvfBlkCredTrf / ns2:FIToFIPmtStsRptS2 / ns1:OrgnlGrpInfAndSts / ns1:StsRsnInf / ns1:Rsn / ns1:Cd
6 Prtry 1 /ns2:SCTCvfBlkCredTrf / ns2:FIToFIPmtStsRptS2 / ns1:OrgnlGrpInfAndSts / ns1:StsRsnInf / ns1:Rsn / ns1:Prtry
4 NbOfTxsPerSts 2 0 /ns2:SCTCvfBlkCredTrf / ns2:FIToFIPmtStsRptS2 / ns1:OrgnlGrpInfAndSts / ns1:NbOfTxsPerSts
5 1 DtldNbOfTxs /ns2:SCTCvfBlkCredTrf / ns2:FIToFIPmtStsRptS2 / ns1:OrgnlGrpInfAndSts / ns1:NbOfTxsPerSts / ns1:DtldNbOfTxs
5 1 DtldSts /ns2:SCTCvfBlkCredTrf / ns2:FIToFIPmtStsRptS2 / ns1:OrgnlGrpInfAndSts / ns1:NbOfTxsPerSts / ns1:DtldSts
5 1 DtldCtrlSum /ns2:SCTCvfBlkCredTrf / ns2:FIToFIPmtStsRptS2 / ns1:OrgnlGrpInfAndSts / ns1:NbOfTxsPerSts / ns1:DtldCtrlSum
3 TxInfAndSts boundless 0 /ns2:SCTCvfBlkCredTrf / ns2:FIToFIPmtStsRptS2 / ns1:TxInfAndSts
4 StsId 1 /ns2:SCTCvfBlkCredTrf / ns2:FIToFIPmtStsRptS2 / ns1:TxInfAndSts / ns1:StsId
4 OrgnlInstrId 1 /ns2:SCTCvfBlkCredTrf / ns2:FIToFIPmtStsRptS2 / ns1:TxInfAndSts / ns1:OrgnlInstrId
4 OrgnlEndToEndId 1 /ns2:SCTCvfBlkCredTrf / ns2:FIToFIPmtStsRptS2 / ns1:TxInfAndSts / ns1:OrgnlEndToEndId
4 OrgnlTxId 1 /ns2:SCTCvfBlkCredTrf / ns2:FIToFIPmtStsRptS2 / ns1:TxInfAndSts / ns1:OrgnlTxId
4 TxSts 1 /ns2:SCTCvfBlkCredTrf / ns2:FIToFIPmtStsRptS2 / ns1:TxInfAndSts / ns1:TxSts
4 StsRsnInf 0 /ns2:SCTCvfBlkCredTrf / ns2:FIToFIPmtStsRptS2 / ns1:TxInfAndSts / ns1:StsRsnInf
5 Orgtr 0 /ns2:SCTCvfBlkCredTrf / ns2:FIToFIPmtStsRptS2 / ns1:TxInfAndSts / ns1:StsRsnInf / ns1:Orgtr
6 id 0 /ns2:SCTCvfBlkCredTrf / ns2:FIToFIPmtStsRptS2 / ns1:TxInfAndSts / ns1:StsRsnInf / ns1:Orgtr / ns1:Id
7 OrgId 0 /ns2:SCTCvfBlkCredTrf / ns2:FIToFIPmtStsRptS2 / ns1:TxInfAndSts / ns1:StsRsnInf / ns1:Orgtr / ns1:Id / ns1:OrgId
8 1 BICOrBEI /ns2:SCTCvfBlkCredTrf / ns2:FIToFIPmtStsRptS2 / ns1:TxInfAndSts / ns1:StsRsnInf / ns1:Orgtr / ns1:Id / ns1:OrgId / ns1:BICOrBEI
5 ARS 0 /ns2:SCTCvfBlkCredTrf / ns2:FIToFIPmtStsRptS2 / ns1:TxInfAndSts / ns1:StsRsnInf / ns1:Rsn
6 Cd 1 /ns2:SCTCvfBlkCredTrf / ns2:FIToFIPmtStsRptS2 / ns1:TxInfAndSts / ns1:StsRsnInf / ns1:Rsn / ns1:Cd
6 Prtry 1 /ns2:SCTCvfBlkCredTrf / ns2:FIToFIPmtStsRptS2 / ns1:TxInfAndSts / ns1:StsRsnInf / ns1:Rsn / ns1:Prtry
4 InstdAgt 0 /ns2:SCTCvfBlkCredTrf / ns2:FIToFIPmtStsRptS2 / ns1:TxInfAndSts / ns1:InstdAgt
5 FinInstnId 0 /ns2:SCTCvfBlkCredTrf / ns2:FIToFIPmtStsRptS2 / ns1:TxInfAndSts / ns1:InstdAgt / ns1:FinInstnId
6 BIC 1 /ns2:SCTCvfBlkCredTrf / ns2:FIToFIPmtStsRptS2 / ns1:TxInfAndSts / ns1:InstdAgt / ns1:FinInstnId / ns1:BIC
4 OrgnlTxRef 0 /ns2:SCTCvfBlkCredTrf / ns2:FIToFIPmtStsRptS2 / ns1:TxInfAndSts / ns1:OrgnlTxRef
5 IntrBkSttlmAmt 0 /ns2:SCTCvfBlkCredTrf / ns2:FIToFIPmtStsRptS2 / ns1:TxInfAndSts / ns1:OrgnlTxRef / ns1:IntrBkSttlmAmt
CTL 6 1 /ns2:SCTCvfBlkCredTrf/ns2:FIToFIPmtStsRptS2/ns1:TxInfAndSts/ns1:OrgnlTxRef/ns1:IntrBkSttlmAmt/@Ccy
5 1 IntrBkSttlmDt /ns2:SCTCvfBlkCredTrf / ns2:FIToFIPmtStsRptS2 / ns1:TxInfAndSts / ns1:OrgnlTxRef / ns1:IntrBkSttlmDt
5 DbtrAgt 0 /ns2:SCTCvfBlkCredTrf / ns2:FIToFIPmtStsRptS2 / ns1:TxInfAndSts / ns1:OrgnlTxRef / ns1:DbtrAgt
6 FinInstnId 0 /ns2:SCTCvfBlkCredTrf / ns2:FIToFIPmtStsRptS2 / ns1:TxInfAndSts / ns1:OrgnlTxRef / ns1:DbtrAgt / ns1:FinInstnId
7 1 BIC /ns2:SCTCvfBlkCredTrf / ns2:FIToFIPmtStsRptS2 / ns1:TxInfAndSts / ns1:OrgnlTxRef / ns1:DbtrAgt / ns1:FinInstnId / ns1:BIC
5 CdtrAgt 0 /ns2:SCTCvfBlkCredTrf / ns2:FIToFIPmtStsRptS2 / ns1:TxInfAndSts / ns1:OrgnlTxRef / ns1:CdtrAgt
6 FinInstnId 0 /ns2:SCTCvfBlkCredTrf / ns2:FIToFIPmtStsRptS2 / ns1:TxInfAndSts / ns1:OrgnlTxRef / ns1:CdtrAgt / ns1:FinInstnId
7 1 BIC /ns2:SCTCvfBlkCredTrf / ns2:FIToFIPmtStsRptS2 / ns1:TxInfAndSts / ns1:OrgnlTxRef / ns1:CdtrAgt / ns1:FinInstnId / ns1:BIC

In fact, you would be generally extracted from mapping data in a separate query so that you can use it to build the dynamic with XMLNamespaces clause of the namespace.

NB1: Also note that not all roads are needed, only those which IS_LEAF = 1 or MAX_OCCURS = "unlimited" or MAX_OCCURS > '1', then you can add a filter predicate in the query directly.

NB2: The query does support all the features of XSD, for example, I've relied on the default behavior for attributes 'element_form_default' and 'attribute_form_default '.

Image - Photo method - the executable export LV Crash - coolish 0x786DE250 in drawmgr.cpp

Hey guys,.

I have a crash appear in my application when you try to export an image to the Clipboard to be pasted to my Word document. The accident happens to export Image invoke node, but occurs only in the executable , and occurs on the 102nd iteration. If I run the executable with 101 iterations, that's fine. If I run with 50 iterations, then run it again to 52 iterations without closing the executable, it crashes.

Executable code, dialogue crash excerpt, below. Any of you have any suggestions or ideas to workaround? Is it something I could change me executable build settings to correct this?

To run the code, you can change all the settings, and then click Go to run the iterations.

Thanks for the help!

Have you tried another image format, other than the EMF?

How to build an equation with variables

I want to solve an equation below shows zero finder vi by the Newton Raphson:

z a * b * c * exp(-z/a),.

a, b, and c are variables

I can build the equation with constant a, b, c, but how do I build it?

Thank you very much!

Use the number to the string functions in the palette of string with the antiderivative of string concatenation to create a formula with your values of a, b and c. Read the detailed help for more information about limitations on the variable names carefully. 'z' is the only variable in your formula for the detector zero. Example is LV2009.

Lynn

Save to File.vi report does not work when integrated with the executable

Hello

When I use the NI_Report.lvclass:New Report.vi and NI_Report.lvclassave report to the File.vi, I can use successfully to create and excel spreadsheet so he was working at the developer.

However when I build the source into an executable, this no longer works. (The name of the file is built from the source, so I'm not using a dialog box)

It can, however, create a .html file, but it does not seem as tidy. Why is he not creating the Excel file?

Running developer suite 2009, tried the .exe on Windows 7 and Windows XP with the same effect.

Thank you

-

James

See the attached zip file, it works for me here, see jpeg images and build the application accordingly and let us know. Did not include exe file, because the file size is too big.

With the help of the child in the executable class

I'm kinda stuck and don't know how to solve and could not find a solution online.

I have a parent class and its children to the class. The child class only overrides a method, but not the run method. I want to compile the executable project, where the run method is called, but the class type is the child, not parent. How to do this?

I tried three things, but all in vain:

(1) in the build properties when I select start VI the run method of the parent, I get in the executable the parent, not the child's class class. It's logical. However, I couldn't find the option to use the child as a type's class.

(2) when I add the run method of the child class and appeal to parents, I get two windows pop up. The run of the parent and the child method. Too many. Even if for the class child run method (see below the block diagram of a child, red run method's parent), I put not to show the façade when it is called in the properties of VI.

(3) when I tried with a separate VI calling the run method of the parent class, but the class type is the child, I get the façade of this separate VI and the run method of the parent. See below (Blue class is child, red of parent).

In both cases 2 and 3, I chose to put the checkbox 'See the façade when it is called' a FAKE, but still the front panels appear.

Someone don't know either: i) the use in the executable version of the options to generate an executable when a different class method is used, or ii) when you compile an executable file with a certain start VI, to not show this starting VI?

I understand if I say "you want to configure the RUN method of the class as 'start-up VI' in the EXE file, but it should run the RUN method for a child object"?

If this is correct, your third approach is the right one. This new boot VI is often used as 'Splash Screen' that covers the task of a demon "spawning" for your application.

You must simply close this VI once it's over. This can be done using VI server on its own front panel functions.

hope this helps,

Norbert

Problem with the executable files

Hello all, I need a help from you...

I use LV 2009 SP1 Professional Development Suite on Windows Seven and I have a problem with the executable files, a problem that I have ever found with other versions of LV (8.x, for example) and I'm a little surprised...

In the attachment you will find an example of what I mean.

There are two base screws, the main one (prova) and a Subvi (provasubvi). The main vi launches the Subvi and the Subvi simply create a chart. As you can see on the screws works fine, without any kind of problem.

I also created the exe file, without specifying that no particular option... and 'magic' of the application does not work as I want. In particular, it seems that the Subvi is running, but the front panel will not be accessible.

I also try to play with the Subvi construction structure and options, but nothing change.

Did you ever solve something like that?... I would say that I thank you in advance for any suggestion...

Andrea

Hello andrea,.

Looking at your project I've heard that you do not include the Subvi during the build of the project. SO I slightly modified. Please find the attachments.

Thank you and best regards,

srikrishnaNF

BMP file do not build in the executable

The problem with the help of absolute paths, is that they are never the same from one PC to the other unless you deliberately recreate the path. In your case, you have the BMP stored on the desktop and the path to the desktop of one PC to another is probably not the same (depending on the user name and the operating system that is used). It would be better that you can use a VI like the one below (get system... directory in the file menu of constants) which returns a system on the desktop path and build your way up from there.

The connection failure module 9795 with wsn-3226 with Labview 2012

Good afternoon

I have a Crio-9074, with a 9795 module and two modules WSN-3226 and I have updated my Labview to the latest version, version 2012 and me cannot communicate with WSN nodes. The program says that the nodes cannot connect with the gateway. The software I have installed is:

-Labview 2012

NOR-Rio 12.0

NOR-WSN 1.4

-OR-Real-Time Module 2012

I checked CRio don't let install WSN host API 1.4.0 because it is not installed in my host. Can someone tell me where I can download it, and if this is the reason why I can't communicate with nodes?

Thank you for your time

Hello

I have

LaurentV wrote:

Hello

Make your cRIO and all modules appear in MAX?

Could you give more details about the problem, such as a screenshot of instructions on how to reproduce the problem, and you get the error message?

---

Lawrence V.

Engineering Application OR (France)

correction of the error, by reinstalling Labview 2012. Thank you very much for your attention.

Build the executable with WSN

Similar Questions

Maybe you are looking for