Remote connections disabled after the last update of Windows (Windows XP)

Similar Questions

• WiFi connection issue after the last update of Windows

  After that the last Window XP updated, I faced a problem connecting wifi internet.

  I (and others I know) get the question when trying to connect to the wifi. One of my friends has windows 7 and had the same problem. Personally, I have two laptops (Thinkpad T43 and T60), the T43 has only been affected. I did a lot of tests (tests of ipconfig, ping, etc.) and found what could be the problem.

  I found that I was not able to conect to my router. I changed my wifi to no (no wep or wpa key) security configuration. At that time, I was able to connect to the internet. I changed my wireless security to WEP key with special characters again and wasn't able to reach my router connection. However, when I changed my WEP key of only alphanumeric characters that has worked. With the WPA key, I am not able to connect to my wifi.

  My laptop is an old but a friend to me as a new brand.

  I have the feeling that there could be a conflict with some brands of wireless cards. I have an Intel Pro 2200BG in the T43 a different in the T60. In my tests, I used the same configurations as my other laptop which doesn't have any problem. I used the same radio channel and values. I would like to get the thoughts of an expert to properly solve the problem

  Thank you

  Problem fixed

  With 2 other people with the same problem (one called me an hour ago!) after the last window xp SP3 update and glancing again Ipconfig. I found that the tcp/ip seem to have been corrupted by the update. Then, I applied the following command at the command prompt: netsh int ip reset resetlog.txt , and then restart the computer.

  This time, the command ipconfig showed information that makes sense! And three laptops with windows XP pro SP3 were able to successfully connect to any Protocol (wpa, wpa2, wep).

  I conclude this post by saying that, probably one of the last update of security for windows XP corrupted the TCP/IP Protocol and we had to reset correctly to solve the problem.

• WiFi connection disappeared after the last update of Windows

  I have a Gateway laptop and I have to be using software wireless Broadcom with a Verizon MiFi 2200 for my internet connection.  It worked fine until a few days ago, when a Windows Update has been installed automatically.  When I try to get a connection it will never end the authentication process because it doesn't seem to be able to assign a valid IP address more.  What happened and how do I fix it?

  Hello

  Make sure that the software firewall not reset the zone of confidence and the wireless traffic cannot reach the wireless router.

  In general, http://www.ezlan.net/wireless.html

  Jack-MVP Windows Networking. WWW.EZLAN.NET

• After the last update of windows, I now shadows behide the fonts & photos

  After the last update of windows, I now shadows behide the fonts & photos. What has caused this & I can fix it?

  Hello

  What is your Windows operating system?

  Right click on my computer

  Select Properties

  Select advanced system settings

  Running, click on the settings button

  Uncheck show shadows under menus

  Disable shadows decline of use for the desktop icon labels

  Click on apply, Ok

  Click OK

• After the last updates of windows have problems with start up and now drivers

  Hello

  After the last updates of windows have problems with start up and now drivers. I get an error code 21 when I try to install the drivers AMD apparently missing.

  May 14, last night I had several (automatically) downloaded windows update

  Today, I was unable to boot my computer with Windows - tried the disk check, start checks etc, and eventually had to use System Restore (for help before the critical update to restore).

  Perfection, everything works, but knowing that windows will attempt to redo an automatic update, tried to check online - no one seemed to have a problem and (naivly) thinking I could always do another restore of the system, I rebooted again.

  Same thing worse. Could not do a sys restore either just before restarting or last night. Chose a date earlier (last week) but then lost the USB drivers and pilots display. Downloaded updated but refuses to let my AMD driver install Windows I have a very unpleasant screen... and I must now stop the installation of this update "critical."

  Would appreciate advice how do my installed display driver or whether anyone else has problems following this update

  Thank you

  Hi Jane,

  You have a disk to install Windows 7 with you?

  I suggest you to check the event viewer for error details report.

  Open event viewer.

  http://Windows.Microsoft.com/en-us/Windows7/open-Event-Viewer

• Monitor flashes after the last update of Windows

  I use a newer computer that already had Windows 7 pre-installed.  After the last update my monitor started flashing.  It didn't happen in Mode safe and I could not diagnose any systemic changes that can occur.  He also doesn't seem to be a problem with the refresh rate.

  I ended up coming back to a restore point from before the update.  The problem occurred after the following updates have been installed: KB2719857, KB2735855, KB2736233 and KB2741355.  Someone knows that could have caused the problem, and if so do I really need?

  All updates have been classified as '' Important '' that's why I didn't question them.

  However, it seems that my monitor was kaput.  It happened to be a coincidence that he begins to not just after a Windows update.

  I thank everyone good help.  I'll keep updating in mind suggestions, in case something strange happens in the future.

• Mice are not appearing after the last update of Windows 8

  After update to the last version of windows 8, my mouse does not work on my computer no more. I use a "HAMA Optical Mouse AM-5000" and a 64-bit Windows 8 operating system to my office. Before the update, everything worked very well, but a little at the time (perhaps a week?) there was a software update that began when I shut down my computer for the night and after, my mouse wouldn't just appear. Then I want to restore my computer to before the update and everything would work fine. It happened maybe 3 times in the past week. Today, however, every time that I restored it to an earlier date, the mouse still does not. I tried the following things:

  Deactivation and reactivation of the mouse
  Uninstall the drivers and search for updates
  Try different mouse (2 USB, 1 green connector)
  Using the troubleshooting in the Device Manager tool, a fine of the question
  Non of them did it no matter what and I wonder if I'm the only one to receive the problem. and what I can do about it. Trying to navigate in windows using only the keyboard becomes very annoying XD.
  Thanks for the reply of Kevin,

  In the (Control Panel > system and security > Windows Update > View Update History) all there is "you have not tried to install the updates for this computer. There "18 updated important and 5 available optional updates to install, but I think that those who might be updates that have been the cause.

  In the (Control Panel > programs > programs and features > Installed Updates) there are a bunch of installed updates. The most recent is "Word Viewer 2003 Service Pack 3 (SP3): WDVIEWSP3" which has been installed on 26/09/13 and "update for Microsoft Windows (KB2889543)" which has been installed on 25/09/13.

  I downloaded the latest drivers from the mouse on the site that you have linked and no change. By chipset are you referring to the processor (Intel i7)?

• Questions after the last update of Windows 9 June

  Anyone had problems after pc recently crossed the Windows Update June 9? After the update my XP machine sporadically connects to MSN, AOL, as well as some websites that I often go to such as Yamaha, aol.com etc don't connect, nor do they ping. When you try on a pc that did not update, they work very well. I have machines here one XP and one Vista and both having the problem. What could be the problem?

  Hi Bronxbabie,

  Go to the Windows update history and check what was the update was installed on June 9, 2009.

  If you are able to find the update,
  Then, open programs and features in Control Panel
  Uninstall the updates that have been installed on June 9, 2009.

  If this is not the case, make a System Restore.
  
  Let us know if that helps. Clement Kumar.

• Aero stopped working after the last update of windows (platform update for windows 7)

  The day after this update my aero stopped working and when I troubleshoot-made the mistake was Manager of DWM is disabled but the service is started. I can not it works using the tips found in the support documents. Help, please.

  I think this will help you:

  http://answers.Microsoft.com/en-us/Windows/Forum/Windows_7-desktop/after-22713-Windows-Update-Aero-features-stopped/a2befbe1-8C32-48ff-a5c0-c51d98a740fd

• Problem after the last update for Windows 7 (11.11.2015): flashing in normal mode login screen

  I am running windows 7 on my laptop last night, that he day and when it's over he did not start the screen flashes and does not start I tried to do a restore of the system without any look can someone help thanks

  Original title: update

  Hi David,

  Thanks for posting your query in Microsoft Community.

  a. you have any Windows 7 installation media?

  b. What is the update's KB number?

  [To see which articles updates failed, try the following steps:]
  a. Open Windows Update by clicking the Start button. In the search box, type Update, and then in the list of results, click Windows Update.
  [ b. in the left pane, click view update history.]

  If the update number is KB3097877, then reinstall the update KB should solve the problem. However, as you can not reach your office, I would first run auto repair with installation media and see if it helps you repair system files or not. For the execution of the task, I suggest you to try the steps below and see if it helps.

  Method 1

  When you use the recovery environment (Windows RE) to troubleshoot startup issues, first try the Startup Repair option in the System Recovery Options dialog box. If this does not resolve the problem, or if you have additional problems manually, use the Bootrec.exe tool.

  Because you cannot start the computer, you may need to create a bootable Windows installation media, and then do an auto repair, and if this does not help then you try to restore your computer to the previous date.

  Note: When you use system restore to restore the computer to a previous state, the programs and updates that you have installed are removed.

  If you are using Windows 7 then the link provided below might help you to download and create installation media.

  Download Windows 7 Disk Images (ISO files)

  Method 2

  If the problem persists, try to rebuild the BCD by using the Bootrec.exe tool. To run the Bootrec.exe tool, you must start Windows recovery environment (Windows RE) . To do this, follow these steps:

  1. Place the Windows 7 installation disc in the disc drive, and then start the computer.
  2. Press a key when you are prompted. Select a language, a time, a currency, a keyboard or an input method, and then click Next.
  3. Click repair your computer.
  4. Click the operating system you want to repair, and then click Next.
  5. In the System Recovery Options dialog box, click command prompt.
  6. Type Bootrec.exe, and then press ENTER.

  See the following link for more information:

  How to use the Bootrec.exe tool in the Windows recovery environment to troubleshoot and repair startup issues in Windows

  If you are able to reach the office, and then try to Uninstall then reinstall the KB3097877 update and check if it helps resolve the issue permanently.

  Hope this information is useful. Let us know if you need more help, we will be happy to help you.

• The Remote option for matching seems to have disappeared (file/devices/Remote). This discovered after the last updated at 12.4 and Remote app would not work. Suggestions?

  The Remote for iPhone & Remote app matching option seems to have disappeared (file/devices/Remote). This discovered after the last updated at 12.4 and Remote app would not work. Suggestions?

  Fixed. I removed the Remote, reloaded app to my iPhone and then reinstated the info Apple ID and password in the app all connected immediately. The 'Remote' option is not always present under file/devices/Remote, but everything works well at this point.

• How to remove Code condition on iwatch after the last update

  How to remove Code condition on iWatch after the last update?

  Hello

  On your iPhone, in the application of the watch, go to: My Watch (tab) > password - tap on disable password.

• After the last update on Wnidows 7 Firefox opens just a blank screen (black).

  After the last update Firefox on a machine Wnidows 7, Firefox opens just a blank screen (black). It worked fine until the latest update. It does not open in "safe" mode I tried several facilities clean and using various other compatibility settings. I also tried various changes of display. Closing X is still under the black forest as I can by conjecture activate this.

  Get a black screen after updating to Firefox 33 can be caused by a problem with hardware acceleration in Firefox.

  You can check if there is an update for your graphics display driver.

  Try to start Firefox in Safe Mode by holding down the shift/Options key.

  Disable hardware acceleration in Firefox.

  • Tools > Options > advanced > General > Browsing: "use hardware acceleration when available.

  You will need to close and restart Firefox after enabling/disabling this setting.

  • https://support.Mozilla.org/KB/troubleshooting+extensions+and+themes
  • https://support.Mozilla.org/KB/upgrade-graphics-drivers-use-hardware-acceleration

• After the last update, the search engine shows a chart containing the symbols of share, recharge and subscribe on my mbp and imac. Please notify.

  After the last update, the search engine shows a chart containing the symbols of share, recharge and subscribe on my mbp and imac. Please notify.

  It is a problem with the extension of the RSS icon (Firefox/tools > Modules > Extensions), so you will have to disable or uninstall this extension until its developer released an update to fix this.

  • https://support.Mozilla.org/KB/troubleshooting+extensions+and+themes

• You Tube is not playing video on Firefox with Adobe Flash after the last update

  You Tube and other sites do not play video on Firefox with Adobe Flash after the last update for both. Adobe Flash works on other sites but not You tube and sites that can have embedded videos from You Tube, I'm not sure.

  Adobe Flash not crushed and no error message is visible. All that shows is a black screen for Flash video. Make a right click of the screen shows only a non-interactive 'a film has not loaded' and the clickable link to the home page of Adobe.

  I spent an hour trying things as suggested for past problems similar to this, but none helped.

  I sent sad face, letting you know what I think of the last update for this reason which explains pretty much the same thing, as I have said here.

  I have no other info but if I had a form any entry and queries you I might be able to provide more.

      I think the Flash 12.xx is a phantom. I can't find it on my comp. Only 13.xx shows anywhere but on the Pugins page in Firefox.
  
  

  Weird. I have no idea why it does that. Your list of details of the system shows that 13.0.r0 Flash.

     About the .Js I cannot find a User.JS in the profile folder but ther is a user.bk and other files that have.json. Should I do anything with these? 
  
  

  If you don't, that's okay. Leave all of the files.

  Does disabling HA in Flash and Firefox work better for you now or even not playing it?
  
  Make sure your firewall is not something Firefox blocks.
  
  This happens in other browsers as well?

  The site appears your version of Flash player and your operating system?

  • http://helpx.Adobe.com/Flash-Player/KB/uninstall-Flash-Player-Windows.html

  Here is what mine looks like