Built in webcam is no longer connect in Vista

Similar Questions

• My dell inspiron 530 built in webcam is not detected on Windows Vista

  Since my computer crashed and I had to re - install all the CD that came with my computer, the built-in webcam and microphone can not be detected by the computer.  I think that the driver can be in a place where the computer does not find it.  Can anyone offer me any advice?  It has been a long time and I really miss my webcam and the ability to use my Audacity to record my own music.

  Hello

  What is the exact model of the computer number?

  I suggest you try to download and install the latest driver for the Dell link and check support if it helps.

  Try to download the driver from the following link: http://www.dell.com/support/drivers/us/en/04?c=us&l=en&s=bsd& ~ ck = mn

  If this did not help, then it would be best to contact Dell for assistance.

  Dell support: http://support.Dell.com/

  Hope the information is useful.

• My dell inspiron 1420 built in webcam is not detected on Windows Vista

  Title: original webcam not detected

  My dell inspiron 1420 built in webcam is not detected. I think I might have deleted a program associated with. I tried to reinstall the driver using the given cd but I get an error message. Please help :) thank you.

  Hello

  What is the full error message that you receive?

  Method 1: You can run the fixit available in the link below and then check if it makes a difference

  Hardware devices do not work or are not detected in Windows

  http://support.Microsoft.com/mats/hardware_device_problems/en-us

  Method 2: You can see the steps described in the Dell link below

  Webcam does not work

  http://support.Dell.com/support/topics/global.aspx/support/KCS/document?c=us&CS=19&docid=266612&l=en&s=DHS

• I've upgraded to Windows 7 Ultimate and now my system does not connect to internet and my built in webcam does not work.

  help please

  I tried to upgrade the verson windows seven that came on my computer vaio to windows 7 Ultimate edition. now I can't connect to internet, my built-in webcam does not work, the menu drop-down selector top of page disappeared and I do not see where there is no improvement in the operating system. That's happened?

  This thread was created in the Windows Update forum.  The moderation of Microsoft answers team has moved to forum installation, upgrade, and activate.  Thank you.

• Qosmo G40 - built Chicony Webcam incompatible with windows live messenger

  I can't have the built-in webcam to work on my brand new G40 - 108 with Windows Live Messenger. I get the following message appears when you try to set up "audio and video setting" the Herald: "Windows cannot connect to this webcam. Close any program that may be using this webcam and restart the wizard."

  He connected with technical support from Toshiba, which were also unable to solve the problem. We have tried to disable both webcam at startup apps. If both executed at startup, the chicony software does not work.

  Does anyone else have this problem? I'll update this post if I get a resolution on their part.

  Thank you!

  Yes I have a solution.
  Remove the old software and the driver for the system.
  Go to the Toshiba European page and download the latest software for a chicony and the driver.
  Then install on the laptop and enjoy.

  Notes; Restart the laptop everytime after reinstalling the driver.

• What is the name of the object that I use to put in properties when setting up my acer built in webcam

  name of the object to set properties for built in webcam

  Hello

  Check with the Acer Support, their documentation and online drivers.

  Acer - USA - Service and support
  http://us.Acer.com/AC/en/us/content/support

  Acer - drivers and downloads
  http://us.Acer.com/AC/en/us/content/drivers

  Acer - worldwide
  http://www.Acer.com/worldwide/selection.html

  ============================

  Troubleshoot camera connection
  http://Windows.Microsoft.com/en-us/Windows7/Troubleshoot-camera-connection-problems

  The methods below are for Windows 7 - Vista and XP are similar.

  Vista references apply to Windows 7.

  You probably need to recharge the device drivers and any software control of the 'IF' camera, there is
  everything for Windows 7.

  Login as an administrator.

  Double-click Control Panel / Device Manager - Imaging - writing down of the brand and model of camera.
  on this subject and on the tab of the driver is version. Now, click on update drivers (who are unable to do anything as MS
  is far behind the pilots of certification). RIGHT click on the camera - UNINSTALL - REBOOT - it
  will update the driver stack.

  Now, go to the system manufacturer's website and download the latest driver for the camera and the other related camera
  software (if not more recent get the same).

  Download - SAVE - go to them and RIGHT CLICK - RUN AS ADMIN - reboot after each driver.

  Look at the sites of the manufacturer for drivers - and the manufacturer of the device manually.
  http://pcsupport.about.com/od/driverssupport/HT/driverdlmfgr.htm

  Installation and update of drivers to 7 (update drivers manually using the methods above is preferred
  to make sure that the latest drivers from the manufacturer of system and device manufacturers are located)
  http://www.SevenForums.com/tutorials/43216-installing-updating-drivers-7-a.html

  I hope this helps.

  Rob Brown - Microsoft MVP<- profile="" -="" windows="" expert="" -="" consumer="" :="" bicycle=""><- mark="" twain="" said="" it="">

• Not able to use the built-in webcam

  I have a HP Pavilion dv6t - 6 c 00. I've upgraded to windows 7 ultimate which I had windows 7 Home premium that I could use the webcam, but now it displays an error when I open cyberlink youcam "warning, no webcam detected. Try connecting a webcam on your computer now. If you are using a built-in camera, make sure it is turned on." I looked and tried all the steps except the final step that the cyberlink youcam software does not allow me to click on the configuration settings. What should I do to activate my webcam?

  According to the message that you have recently published, I want to confirm that this could be a hardware problem and I highly recommend to Contact HP immediately technical support by phone for further assistance immediately to get your Notebook diagnosed and repaired by an authorized HP Certified Engineer

  You can also check your warranty here to check the status of the guarantee

  Hope this helps, for other queries in response to the post and feel free to join us again

  * Click on the star of CONGRATULATIONS on the left to say thank you *.

  Make it easier for others to find solutions by checking a response "Accept as Solution" if it solves your problem.

  Thank you

  K N R K

  Although I am an employee of HP, I speak for myself and not for HP

• With Windows 7 or 8 on my 2710p (built in webcam), the camera driver says "HP Webcam not found"

  I had the webcam on my 2710p with Windows 7 running for a while, but after I plugged an external webcam (I think it's marked Microsoft), it's almost as if my built in webcam dissappeared.  I tried to format the computer to Windows 7 and now Windows 8 (the two 32-bit), hoping that a new facility would solve the problem, but when I try and install the driver of webcam sonix from the page of drivers hp for the 2710p (with W7 Home Premium 32 bit drivers), it says "HP Webcam has not found! Please connect the HP webcam and then run Setup again. "The only unknown device in my device manager is the PCI controller, I don't really like.

  What happens here? I'm pretty tech literate, but I'm stumped here.

  Webcams are fragile and I suspect yours is dead. I think that it is a coincidence that it happened while you were using an external webcam.

• Windows 8 cannot find the built-in webcam?

  Hello

  I bought recently are about a week, my laptop Alienware M18x. and the integrated webcam can be found.

  The first day when buying it, it worked (the webcam to take a photo of profile), but since then, he has not. My computer is running on Windows 8, so when I select the Webcam app, it says "Connect a camera."

  I also tried different ways to have my camera works (for example trying to use it on Skype and things like that), they all say that I have no webcam plugged in, when it's a built-in Web camera.
  So, how can I do so that my webcam can be found? I would like to talk to my friends on Skype with him soon!
  Thank you!

  Yes.

  Number of hours of frustration later!
  Top of page under the devices hidden from view.
  Click on this.
  Should see here imaging devices.

  Good luck!

• Update iPhone 4s to 9.2.1 says: impossible to verify the update you are no longer connected to the internet. but I am connected through wi - fi.

  Update iPhone 4s to 9.2.1 says: impossible to verify the update, you are no longer connected to the internet. But I am connected by wi - fi and I get an email on the phone. My existing operating system is 6.something.

  Go to settings > general > storage & use iCloud > manage storage (the first) > and if there is an update, delete it. Then go to settings > general > Software Update and try again.

  If that doesn't work, try updating through iTunes on your computer.

• iOS 9.3.2 failure of verification because you are no longer connected to the internet

  Hello

  Am not able to update the ios of 9.3.2 new updates in iPod Pro, the following error is funded, " ios 9.3.2 failure of verification because you are no longer connected to the internet" ".

  Kindly advice

  Concerning

  Sankar G

  Read this post

  iPad Pro will not install the last update of iOS, says that it is not connected to the Internet. It is connected!

• Satellite Pro U500 - download to activate the built in webcam?

  My apologies if this is the wrong forum, but I'm a new user here.

  can someone direct me to a link to the download to activate the built in webcam on my satellite pro u500 please?

  Thanks to all in advance

  marchamjack

  Hello and welcome to Toshiba support forum.
  At has first of all tell us please what Satellite Pro you exactly.
  What operating system do you use?
  What is the problem with the webcam?

  Each laptop model comes with preinstalled OS and webcam should work fine.
  I presume that you should have Win7 64 bit, right?

• How can I activate my built in webcam on my EliteBook 6930p

  Spoiler (Highlight to read)

  How can I activate my built-in webcam on my EliteBook 6930p using windows 7 ultimate 32-bit Operating system.

  How can I activate my built-in webcam on my EliteBook 6930p using windows 7 ultimate 32-bit Operating system.

  The information contained in the following links may help you to a certain extent:

  HP laptop, Touch and PC AiO - Webcam Troubleshooting (Windows 7)

  Difficult problems of WebCam on your laptop comes with and still running the Windows 7 operating system.

  HP desktop PC - Webcam Troubleshooting (Windows 7)

  Try to use a webcam and receive no sound or video? This article contains useful suggestions that can solve your webcam.

  HP Notebook PC - tests with MediaSmart Webcam on Windows 7

  HP MediaSmart Webcam allows you to test and use the webcams built into Windows 7.

• How to bring back Safari? I upgraded to El apitan 3 weeks ago and suddenly Safari "is no longer connected.

  Safari does not, nor will it try to open. How to bring back Safari? I upgraded to El apitan 3 weeks ago and suddenly Safari "is no longer connected.

  If your Mac is running v10.11.3, update your system software will probably help the Safari issue.

  Open the App Store and then select updates from the top of the menu in the window of the App Store.

  The v10.11.4 update is available.

• Built-in webcam on Satellite P200 recently stopped working

  My built-in webcam on my P200 recently stopped working.

  To resolve this problem, I thought I would updat the pilots of the site however do, installing these drivers fail to say that I need to contact the hardware vendor, which means that I can't use my cam.

  Someone at - he encountered this before and got a fix?

  Maybe that sounds stupid, but you tried to restore the operating system time earlier, before that to happen?
  You can do it by using System Restore tool. The system to only regular control points.
  Check if you can find one created before that this problem occurs.

  Try it. Maybe using.