Bulk change the form field values?

Similar Questions

• To access the form field values

  Hi all
  
  I have a form with several fields. I need to change the value of a field as 'Y' and send the form in the java code.
  I used the following
  FacesContext fctx = FacesContext.getCurrentInstance ();
  RichInputText = (RichInputText) fctx.getViewRoot (.findComponent("pt1:r1:Active1")) active1;
  If (active1. GetValue(). ToString(). Equals("Y"))
  active1. SetValue ("N");
  on the other
  active1. SetValue("Y");
  This changes the value, but if I run "Commit" operation using
  bindings.getOperationBinding("Commit").execute ();
  its not saving in dB.
  
  My usecase:
  By clicking on the button, need to change the value of the indicator (field) and submit the form that has to go to DB.
  
  Please suggest me the right way.
  
  Concerning
  Suresh Camille

  can you explain your case to use a little?
  Your first message, I understand you want to access the value of Active1
  You can use this code:

  // get the binding container
  BindingContainer bindings = BindingContext.getCurrent().getCurrentBindingsEntry();
  
  // get an ADF attributevalue from the ADF page definitions
  AttributeBinding attr = (AttributeBinding)bindings.getControlBinding("test");
  //set the val
  attr.setInputValue("newval");
  //get the val
  String val = (String)attr.getInputValue();
  

  your second post, I see that you are editing the text. So I'm a bit confused.

  Timo

• How can I change the form field in muse?

  I want to change the e-mail address of the sender of my that actually send the form on an adobe muse site.

  Hello

  There is no native function in Muse to change that.

  Kind regards

  Aish

• How can I change the font in the form fields to fill

  I have already set the fields of a font, but want to change after I test filled in the fields of text in preview mode. but now when I highlight the fields and select properties and select a different font and size, it shows the new selection of fonts but the fields will not change what has already been entered. I tried to change the field and delete the text and Fain same original font type and size is still there

  Hello.

  I guess that these areas use the option 'allow formatting of the rich text.

  Thus, it is not Properties: aspect which resulted in implementing in the form of text, thetext in the form field"' bar (CTRL-E or CMD-E).

  Uncheck the option 'Allow rich text formatting' to return to this behavior.

• Get the names and form field values

  Hi everyone please help me

  I tried the following code, but it returns me the result as ("found no fields")

  I'm not able to reach my pdf here, I tried with a method more evenly, always it returns nothing.

  When I went through the Forum, I heard about LiveCycle Form. If my pdf is Livecycle form based so please give me the code to reterive the form fields names and values,

  method 1:

  ' / / Let's start

  Set WshShell = CreateObject ("Wscript.Shell")
  WshShell.run "c:\F4.pdf Acrobat.exe.
  While not WshShell.AppActivate ("Adobe Acrobat"): 1000 Wscript.Sleep: Wend

  
  ' / / Set/Get Acrobat objects
  The App value = CreateObject ("AcroExch.App")
  Set AVDoc = App.GetActiveDoc
  Set PDDoc = AVDoc.GetPDDoc
  Define the JSO = PDDoc.GetJSObject

  ' / / Search fields and extract the Name value +.
  txt = «»
  If jso.numFields then
  for i = 0 to jso.numFields-1
  FN = jso.getNthFieldName (i)
  ' msgbox (x)
  the value of f = jso.getField (fn)
  F.value = FV
  txt = txt & fn & "=" & fv & ";"
  next
  MsgBox (txt)
  on the other
  MsgBox ("no fields found")
  end if

  Set AVDOC = Nothing
  Set PDDoc = Nothing
  Define the JSO = Nothing

  Method2:

  MyFile = "C:\output.pdf".
  Set AcroExchApp = CreateObject ("AcroExch.App")
  Set AcExAVDoc = CreateObject ("AcroExch.AVDoc")
  bOK = AcExAVDoc.Open (myFile, "")
  AcExAVDoc.BringToFront

  sMsg = «»

  If (bOK) then
  Set AFormAut = CreateObject ("AFormAut.App")
  
  If AFormAut.Fields.Count = 0 Then
  sMsg = "No there there no field (s) to read this PDF file"
  On the other
  sMsg = "There are" & AFormAut.Fields.Count & "fields in this PDF document.
  End If
  

  
  For every FormField in AFormAut.Fields
  FieldName = FormField.Name
  FieldValue = FormField.Value
  ' MsgBox AFormAut.Fields (Fieldname). Value
  sMsg = sMsg & vbLf & "," & Fieldname & "," & AFormAut.Fields (Fieldname). Value & "," & FormField.IsTerminal
  MsgBox SMsg

  Looks like there is no form field.

  Could you please tell me, how we can attach files in this forum. While I will attach my Pdf file

  You can put the file on acrobat.com ( https://acrobat.com/ ).

• How to change the image field captures screenshots automatically from BMP to JPEG

  How to change the image field captures screenshots automatically from BMP to JPEG

  I want to say, when I tap on the screenshot on my keyboard and paste this image in microsoft photo editor or picasa 3.0 areas of the bitmap .bmp. instead of asking the witch I´d field prefer.
  So, I open that image on the brush to convert it to. JPEG.
  It's hick very!
  is it possible to easily me this step and save or paste pictures in JPEG on my files automatically?

  Hello

  I saw that article when I was looking for one that I posted...

  I understand your problem, and the answer is that, to the best of my knowledge... NO..

  Windows records the capture in memory as bitmap, along with, even if you can paste it directly into a folder, it would be in the form of bitmap...

  The best I could find is to use the suggestion in the link I've included which refers to the

  Windows Key + PrintScreen to automatically record is in PNG format in your pictures folder...

  The only way to do what you want is with a 3rd party capture program that can be configured to save in a directory as a specific file type...

  Personally, I use a program called print screen Deluxe for this... it is a purchased program...

  I'm sure you could find something free to do what you need...

  You may need to use a different key for print screen, but the software can allow you to reprogram the PrntScrn key...

• How to edit an existing esign form that is inside a widget?  I need to change the form, but keep the widget.

  How to edit an existing esign form that is inside a widget?  I need to change the form, but keep the widget.

  Hello Damien,.

  If you talk about form fields in the Widget, then Yes, you can change them by going to the tab manage and click Edit opposite the name of the Widget under the Widgets section.

  Kind regards

  -Usman

• Forms to fill out and Distribution: to flatten author text but not the form fields

  OK people, first time posting on this forum, but certainly not my first time looking for answers!  I was quite managed with other issues if I think I myself stumped on this one.

  I created the form fillable 'generic' I'm going to use to distribute to various contacts for some upcoming projects that we will participate in.  Because each project will be different, instead of having to create a new form every time, I hope that with my base model form I can enter various information with the type writing tool and somehow to protect this information to be edit/delete while allowing my contacts to enter their information in the form fields.

  I tried to apply the different variants of security features, but the downside of this is that it does not "distribute" my form so that it can be track with Adobe Tracker.  The only way I can successfully distribute this form for the masses and track responses is if all the security settings of the document are disabled.

  I hope that this logic all how I explain it.  Because the information (not the form fields) on the document sent to the changes each week, I was hoping there would be one easier way other than creating a form to complete for each new.  I'm not an expert of Actions, but it would be possible to create an Action that would "flatten" the text of the type writer only?  That would at least prevent third parties to manipulate or remove information that I placed on the document.

  This free tool based on JavaScript for Acrobat is what you need: http://www.uvsar.com/projects/acrobat/flattener/

  The typewriter tool creates a type of text box, so that you would select just this box to flatten.

• How to change the number of values in the hour that are restricted.

  Hello

  May I know how to change the number of values in the hour that are restricted.

  In fact, we have improved of obiee in obiee 11g 10g. Data base is the same for Both.In 10 g the prompt value is limited to show only 35 records per page. As we passed it shows only 35 Records in 11g also. How can I change this limit to 11g.

  Please suggest me! Its urgent!

  Thanks and greetings

  Navnitha

  Hello

  In the advance tab we have the XML of the upgraded report, copy it into a Notepad and try to find the line beginning as below

  In 10g, we have something like below, simply remove the choicesPerPage = '35' from 11 g OBIEE XML report

  Thank you

  RAM

• How to change the search fields displayed on the homepage of UCM 11g?

  Hello

  How to change the search fields displayed on the homepage of UCM 11g?

  Another option for you.

  Follow the links below.

  How to: Customize the home page of Oracle UCM with configuration manager. -Blog of BlueStudios Johns

  Example of a custom component.

  bluestudios.co.uk/blog/wp-content/uploads/2009/02/ether_homepage1.zip

  -Prashant

• A statement UPDATE changes the line if the update changes the column even value?

  HI -.

  I have a main classification and the corresponding audit table. I have a trigger. I created using the suggestion:http://www.runningoracle.com/product_info.php?products_id=211

  Now the problem that I am facing is that: if I run the same query (same value) update on the main table for n times (with the same data)... my audit table is updated with a new record every time. He is not able to determine that the value is the same.

  My goal is to load the audit table data if the value in a cell in the main table is really have changed.

  A statement UPDATE changes the line if the update changes the column even value?

  Best regards

  I have a main Table and the corresponding Audit Table. I have a trigger. I created using the suggestion:http://www.runningoracle.com/product_info.php?products_id=211

  Why?

  You try to resolve what made you what are the PROBLEM that select as the solution?

  Now the problem that I am facing is that: if I run the same query (same value) update on the main table for n times (with the same data)... my audit table is updated with a new record every time.

  Yes - it is EXACTLY what you say that you wanted to do and EXACTLY what the code does in this article.

  He is not able to determine that the value is the same.

  I think you mean that the code does NOT check if the value is the same. You can certainly change the code to do this check. But I have a question to start with your need for such a solution.

  My goal is to load the audit table data if the value in a cell in the main table is really have changed.

  OK - then modify the code to check EACH COLUMN and compare its NEW value to the OLD value and insert only the table of audit if SOME (or columns you care specifically) have changed.

  A statement UPDATE changes the line if the update changes the column even value?

  It depends on what you mean by 'change the line '. Of course to update a column with the SAME value does not change the resulting data value.

  But the physical structure of the line, the location of the pieces of line and information in the header block (YVERT, etc.) will change. And, as others have said Oracle doesn't know and doesn't care, so if the new value of a column is the same as the old value will create redo, undo and the rest.

  Start over and tell us what PROBLEM you're trying to solve. Then we can help you find the best way to solve it.

• I need to change the form, but it is "secure".

  I created a form in Acrobat Pro 8. XX made rights to fill and created for reader. I need to change the form, but it is "secure". How can I change the warranty form and re established the rights of the reader later

  Thanks Frank

  To change the PDF form, you must remove Reader Extended rights in saving the PDF as a copy as described in the help documentation.

  When you apply the Reader Extended rights are provided the opportunity to save the form in a different folder or under another name... This will prevent this problem since you have a copy of the form without and scope of rights.

• All the form fields do not paste from one file to another

  I use Adobe Acrobat DC on OS 10.10.3.

  I have a .pdf file containing form fields set up on what I want to use it as a 'model '.

  One machine I can copy the form fields and put in a new .pdf file and it works fine, but on any other machine, I tried it on it is not. On the other machines when I copy the fields of the form about 75 percent of stick them in the new .pdf.

  Is there a setting/preference on what I should check or would be - something else causing this problem?

  Thank you very much for the help.

  Replacing the old pages with the new in Acrobat is the standard way to do what you want. The fields of forms, links, code, bookmarks, comments, page/document, metadata, etc. are preserved.

• I accidentally hit the wrong command on my key board and now forms are white and black outlines. How can I change the forms to their original colors?

  I accidentally hit the wrong command on my key board and now forms are white and black outlines. How can I change the forms to their original colors? (I do not change the color of shapes, I think that I just changed it in some weird setting)

  Figured it out! It was in 'outline' mode I went to view > preview and are back to normal.

  How can Illustrator Adobe - I get out of the preview display? -Graphic design change battery

• Adjust the text in the form field

  How do you shrink to fit the text in the form field when you fill in a document?

  I use reader XI.

  This document is a form of Government and a protection on it, if it's important.

  It is mainly for the purpose of printing and using the paper document. When you print from the field cut the text and it is impossible to read the entirty of the field.

  Thank you

  Hello jjcola

  You can do that with the Reader. You need Acrobat, please try the free trial http://www.adobe.com/in/products/acrobat.html

  ~ Deepak